I can't get Safari to quit. Even if I try a restart, Safari prevents it.
I can't get Safari to quit. Even if I try a restart, Safari prevents it.
Choose Force Quit from the Apple menu and shut Safari down from there.
(91782)
Similar Messages
-
When trying to logout, I keep getting "the application safari canceled logout" even though I am not in Safari. This only recently started happening and I'm wondering if it is a setting issue or bug. Can someone tell me what to do?
You don't have to be "in" Safari for it to cancel logout.
You have several different Applications open, and any one of them may cancel logout if conditions are just right.
Quit the Applications you are no longer using and your Mac will run better and faster. And it will logout instead of cancelling. -
how can i get itunes to quit skipping to the currently playing song when i'm working on the library somewhere else?
You might be able to achieve what you want by using Party Shuffle. Set the source for Party Shuffle to be the playlist you want to listen to or add the tracks you want to listen to by control clicking on them and selecting Add to Party Shuffle. Once everything is in Party Shuffle, you can rearrange them to your satisfaction. As the songs are played, they'll roll off the queue. You can quit iTunes and even when you restart, all your songs will be there, in the order you want, waiting for you to hit play.
-
I am constantly getting a pop up box to sign into imessage or facetime and can't get rid of it even after entering password. What can I do?
Launch Safari with the Shift key held down. If that doesn’t work, disconnect the computer from the Internet.
(116847) -
Bought a new Ipod touch and the WiFi does not connect. Tried Reset and total Restore, does not connect to Router on DHCP, tried Static IP, Subnet, Router and DNS manually and still can not get it to connect even though it registers as connected. Using Airport for router, latest firmware, no problems with Iphone 4 or Macbook Pro or any other internet devices. After total Restore (factory settings) tried again, showed connected to router, but does not display "check" next to router but little rotating icon even though the wifi range signal shows connected at full strength and it says it is connected. Just can't seem to get it to generate an IP. Any solutions other than turning it on and off again? Not a Merry Christmas morning.
Ok, so, a couple of things: Denisefromwaleska and I have the exact same size/type/color iPod. Now wishing I'd bought the black one maybe...
Second, Airport is an Express and I have a second one that I carry with me when I travel. Tried to connect my Airport Express to the internet and could not although the iPod did recognize the router and tried to connect to the internet for some time, unlike my previous problem. Updated firmware on my travel router, still could not connect to the internet. Going to try to set up a manual Static IP on the travel router here in a few and conect through it although I predict the problem will persist. Back on the Christmas Present Airport Express router, it is back in play and working fine for all devices save the iPod.
Thanks again for all your help, hopefully I can get a solution in place soon, -
I downloaded a new APP to my iPhone it appears on my screen but can't get it to appear on my wife's iPhone screen. Her screens were initially full of Apps, I later made room for the new APP but can't get it to appear even after making room for the new APp. It can be opened, but I want the APP to be on her iPhone screen as well as on mine. Help, please.
Is the app downloaded on her phone also?
-
Can I get help with podcasts? When I try to open the podcasts tab, itunes crashes, says "itunes has detected a problem and must close", or the spanish equivalent since my xp is in spanish. everything else works fine, it even downloads podcasts and syncs.
The only other thing I can suggest is to use the Repair option for iTunes.
Download the iTunes programme (do not uninstall your current iTunes) and then "install" the new copy. At some stage you should see an option to "install" or "Repair". Take the Repair option.
Once you've done that, if you still have a problem, I don't know what else to suggest, except to search through the discussions to see if anyone else has had the problem and managed to fix it. -
I have purchased Itunes Match, and go to Settings/Music and it tells me to subcribe to Itunes Match. I click on that and it says I am subscribed, but I can not get it to quit playing ADs. I have rebooted.. Nothing seems to work.
Any ideas
Message was edited by: BobTheInspector
Figured it out. Must sign out from Itunes and then back in and it works.Welcome to the Apple Community.
You cannot use iCloud.com on a mobile device, only on a computer. Documents in iCloud are available via the apps themselves on a mobile device. -
I have a macbook OS X 10.6.8. I was messing around with java yesterday and now I get a Internet configuration page when I try to launch safari . How do I get rid of this. Thank you.
Can you post a screen shot?
-
We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?
Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben -
i have ms exchange 2013
given error web browser
something went wrong
Sorry, we can't get that information right now. Please try again later. If the problem continues, contact youHi,
I would like to verify when this issue occurs, accessing ECP or OWA. If it occurs when accessing OWA, check if all users have this issue. What's more, please take your time to post the screenshot of error information for my further research.
Here is a kb about "Something went wrong" error for your reference.
"Something went wrong" error in Outlook Web App may show an incorrect date
http://support.microsoft.com/kb/2961715
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
I tried to send a photo on my phone in a chat message. The photo locked up. I can't get back to photo stream. How do I restart phone or solve issue otherwise.
More than likely you can get the phone back by doing a reset. Hold the sleep/wake and home buttons together until you see the Apple logo and then release. The phone will reboot.
-
I desperately need your help. I was working on iMovie last night when the thing froze up on me. I've tried rebooting. I've tried reinstalling the apps. No change. I can play some of the files- although I can't tell which ones will play until they magically appear. I can't get into the project library or the event library. The bar that lets me scroll through the clips is gone. Even when I can get something to play the whole system crashes after a couple of minutes and generates a "problem report" that says "iMovie Quit Unexpectedly". This all started when I was adding cutaways- and one clip just would not load. After I tried several times everything froze up. Have you ever heard of something like this? Maybe I pushed a button or somehow changed a setting? Maybe some of the video is corrupt? What do you recommend?
Thanks for any advice you can offer!I have tried all the above and nothing seems to work. Any other suggestions?
-
I'm connected but can't get browser, email or even FTP ????
Special thanks for the article "Sun PPPoE on Solaris" by Phil Dibowitz and "Setting Up Solaris OS to Work with Cable Modems" by Muhammad Talha (I have DSL however). Without these 2 articles I wouldn't have gotten as far as I did.
First off I'm running on an AMD CPU with Realtek 8139 PCI plug in card.
Ok here is the problem. It looks like I have connected but I can't get the browser , email or even terminal FTP to work. I think I'm at the gateway but I can't get onto the internet.
Here is how my system looks right after I boot up .
# ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
rtls0: flags=1004842<BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 index 2
inet 0.0.0.0 netmask 0
ether 0:50:bf:6:5a:6d
sppp0: flags=10010008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4,FIXEDMTU> mtu 1492 index 3
inet 216.8.174.237 --> 216.8.136.29 netmask ffffff00
ether 0
I'm connected right? But why 2 IP addresses (one for me and one for the gateway?)
Solaris gives me notice during BOOT that it can't configure rtls0: for DHCP but then connects somehow? later on in the auto connect script (script copied from Phils article)
Also Phil recommends running debug to generate the connect-errors file. Here it is ! You can see that I HAVE CONNECTED !
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE Event Open (1) in state Dead (0): action SendPADI (2)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Sending PADI to ff:ff:ff:ff:ff:ff: 18 bytes
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE State change Dead (0) -> InitSent (1)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Received Active Discovery Offer from 0:90:1a:a0:a1:f4/rtls0:pppoed
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE Event rPADO+ (5) in state InitSent (1): action SendPADR+ (5)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Sending PADR to 0:90:1a:a0:a1:f4: 42 bytes
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE State change InitSent (1) -> ReqSent (3)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Received Active Discovery Session-confirmation from 0:90:1a:a0:a1:f4/rtls0:pppoed
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE Event rPADS (7) in state ReqSent (3): action Open (7)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: Connection open; session 0C2F on rtls0:pppoe
rtls0:
bas1-windsor12
0:90:1a:a0:a1:f4
3119
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: PPPoE State change ReqSent (3) -> Convers (4)
2007/02/20 07:29:41EST: /usr/lib/inet/pppoec: connected
And yes I have tried everything I can think of with the DESKTOP PROXY SETTINGS. (but do I need to shutdown each time after I make a change? to the proxy?) Do I even need a proxy? My computer is plugged into a 3COM "Home Connect" HUB. I have an ALCATEL Speed Touch Home DSL modem.
Please help !
Dan
BTW... I POSTED THIS WITH ANOTHER COMPUTER>Please excuse me that I wrote "sysuncinfig", it was "sysunconfig". Did you try it?
Yes many times. Thanks. It is less work than a re-install.
>I had exactly the same problem like you, after many tryes with manual files editing, finally I used sysunconfig.
Can you give us last output of ifconfig -a.># ifconfig -a
lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1
inet 127.0.0.1 netmask ff000000
rtls0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
inet 80.191.6.99 netmask ffffff00 broadcast 80.191.6.255
ether 0:50:bf:6:5a:6d
sppp0: flags=10010008d1<UP,POINTOPOINT,RUNNING,NOARP,MULTICAST,IPv4,FIXEDMTU> mtu 1492 index 3
inet 216.8.175.129 --> 216.8.136.29 netmask ffffff00
ether 0
lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 8252 index 1
inet6 ::1/128
rtls0: flags=2000841<UP,RUNNING,MULTICAST,IPv6> mtu 1500 index 2
inet6 fe80::250:bfff:fe06:5a6d/10
ether 0:50:bf:6:5a:6d
# ipconfig
ipconfig: not found
>As I understood, you have modem that is connected to the Internet and computers obtain IP from it. Am I correct?
If yes, and your line is some kind of xDSL (for example ADSL or something like that), probably that your modem is router (that kind of lines, there is no real modem with dial up, it just logs on).
I'm only using a 3COM Home Connect HUB. At one time when we had up to 4 computers on it, we were automatically re-assigned up to 4 different IP addresses each time.
>The problem with DHCP and such router is that your computer will have hostname "unknown", if you want other hostname, give it permanent IP and setup program will let you to specify IP address.
I will need to pay my service provider more for a "static IP address" What you are talking about is a "static IP" . Am I right?
>*How to know what IP you have put in default router? On your Windows computer run "ipconfig" command and see what is IP of Gateway (in Solaris it is called default router).
I got it ! Sorry about that you said try on the Windows computer. Thanks.
On my wifes computer it is 169.254.XX.XX
On mine also 169.254.XX.XX
The XX are not the same.
Thanks for all of your help.
Dan -
I loved Safari and was using it getting to know it...then messed it up now the only thing that shows when I open it is some bookmarks.. I cannot acccess the safari icon logo...or drop down boxes to change anything...and I cannot open more than one page at a time. I like Safari as when it first was downloaded so I removed it. I reinstalled from the web but the new one shows up the same as the old one I removed.
How can I get the old gone for good so I can have the original Safari download windows 7 64 bit...thank you... yakayIn the course of your troubleshooting to date, have you worked through the following user tip?
Safari for Windows: getting your bars back
Maybe you are looking for
-
ITunes does nothing when I plug my iPhone in
I have an iPhone 5 32GB, a 2007 iMac 24", Mountain Lion 10.8.4 and iTunes 11.0.4 (4). When I plug my iPhone into my Mac, absolutely nothing happens. If iTunes is closed, it doesn't open. If iTunes is open, no iPhone button appear in the top right cor
-
Statement works as a straight insert statement but not in a procedure
I can run the folloiwing statement as a straight insert INSERT INTO MYTEMP SELECT CASE WHEN line_num < 10 THEN NULL ELSE AVG( close) OVER (ORDER BY trade_date ROWS between 9 preceding and current row) END AVG_10 FROM stocks_hold WHERE symbol = 'DIA';
-
Need to create form on a table with report with a table has NO primary key
Hi, I tried to created some insert/update/delete form+report in an application, it works fine only if the table has primary key. Does anyone know how to create the same functionality with a table with no primary key? I saw an application is built on
-
Hello Does anyone know if it is possible to make a boundary line all the way around the outside of a design ? I know this is possible in CorelDraw. I have tried Offset path in ai, but it seems to offset all lines, including the internal lines inside
-
I have adobe flash player but how do I get plug in's
I have flash player but how do I get plug-in's?