I can't get Safari work with Java 7 version 20 any suggestions?

I can't get the newest version of Java to work with Safari 6.02.   It doesn't recognize it .  Works fine with Firefox.

If you have Java 7u13 installed in your system, but it isn't working with Safari, you will want to ensure the plugin is properly enabled.
1.  Under "System Preferences...", you will want to open the Java preferences pane (which will open a new window).  Under the Security tab of the Java prefences pane, ensure "Enable Java content in the browser" is checked.  This will allow Java web content to be used globally (if Java works under Firefox, this is probably already checked).
2.  Open Safari's Preferences.  Under Security there are four checkboxes grouped under the label "Web content:".  One of them is Java.  Ensure it is checked.
Be aware that enabling Java in the browser does open you up to any Java vulnerabilities.  Best practices are to only enable Java when you need it, and disable it otherwise.

Similar Messages

  • My hard drive crashed on my Imac 24" 2009, i put in a new hard drive 2TB and a SSD drive 240 GB and removed the opticdrive. What external DVD can I get to work with the IMac? The Apple super drive is not compatible.

    My hard drive crashed on my Imac 24" 2009,  I installed a new hard drive 2TB and a SSD drive 240 GB and removed the optical drive.
    What external DVD can I get to work with the IMac?                              The Apple super drive is not compatible.

    Virtually any DVD burner that can connect to your Mac will work. They start at $40 on Amazon.

  • Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    Hi, I can't get my old wacom intuos2 to work with mountain lion, any suggestions? Apart from buy a new tablet.

    I was out of town for a few days. I had no issue installing the driver on Mountain Lion (10.8.2). What specifically happens when you try to install?
    If you get this message:
    then you need to right-click on the installer package and select 'Open' when you get this message:
    If this isn't your issue you need to be more specific about what is happening.

  • Is oracle ebs work with java version 7.51 ?

    Hi,
    is oracle ebs work with java version 7.51 ?
    Thanks

    Findy Nurtantio wrote:
    Hi,
    is oracle ebs work with java version 7.51 ?
    Thanks
    Yes, Java JRE 1.7.0_51 is certified with Oracle E-Business Suite -- https://blogs.oracle.com/stevenChan/entry/java_jre_1_7_08
    Thanks,
    Hussein

  • Can't get networking working with RALink 3062 Drivers

    So i installed a core install with wireless-tools, but from here i followed the beginners guide to install networking and can't get it working, I even tried and compile the ra2860 drivers for it, said the compile and install worked but still can't get access to the ra0 interface. Need help

    Deleted
    Last edited by impassive (2011-08-27 15:15:27)

  • I bought the HP Envy 100 printer with my new Macbook Pro 13" and it does not seem to work with Lion.  Any suggestions?

    I bought my daughter a new MacbookPro 13" for grad school and selected the HP Envy 100 printer from the Apple Store website.  When I just tried to install the printer, it said that that the software was not compatable with Lion.  Any suggestions as to how to get it to work?

    Sorry, but the response just takes you to the HP site which is of  all possible assistance short of actual help!!
    HP (and Apple?) need to fess up and tell all the people who have HP printers when they will "just work" with their machines and OS X Lion.... because for many of us, they just don't! It isn't rocket science guys.... blithely telling us that downloading S/W updates from Apple doesn't help.... because they don't solve the problems!

  • Can't get networkmanager working with openvpn (using static key)

    I'm trying to configure networkmanager to open up my VPN connection - using the static/preshared key method - but no dice.  (Although I'm able to connect just fine using openvpn from the command line)  Anyone been able to get this to work and/or have some suggestions?
    I've installed the packages networkmanager, networkmanager-openvpn, and nm-applet.  I run nm-applet, and configure the connection, but when I try to launch the connection, it fails.  Log file reads as follows:
    Oct 28 16:43:56 daroselin NetworkManager: <info> Starting VPN service 'org.freedesktop.NetworkManager.openvpn'...
    Oct 28 16:43:56 daroselin NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.openvpn' started (org.freedesktop.NetworkManager.openvpn), PID 19131
    Oct 28 16:43:56 daroselin NetworkManager: <info> VPN service 'org.freedesktop.NetworkManager.openvpn' just appeared, activating connections
    Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin state changed: 1
    Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin state changed: 3
    Oct 28 16:43:56 daroselin nm-openvpn[19133]: OpenVPN 2.1_rc20 x86_64-unknown-linux-gnu [SSL] [LZO2] [EPOLL] built on Oct 18 2009
    Oct 28 16:43:56 daroselin nm-openvpn[19133]: NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
    Oct 28 16:43:56 daroselin nm-openvpn[19133]: LZO compression initialized
    Oct 28 16:43:56 daroselin kernel: tun0: Disabled Privacy Extensions
    Oct 28 16:43:56 daroselin nm-openvpn[19133]: TUN/TAP device tun0 opened
    Oct 28 16:43:56 daroselin nm-openvpn[19133]: /sbin/ifconfig tun0 10.1.0.2 pointopoint 10.1.0.1 mtu 1500
    Oct 28 16:43:56 daroselin NetworkManager: <info> VPN connection 'DARSYS VPN' (Connect) reply received.
    Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin failed: 2
    Oct 28 16:43:56 daroselin nm-openvpn[19133]: /usr/libexec/nm-openvpn-service-openvpn-helper tun0 1500 1545 10.1.0.2 10.1.0.1 init
    Oct 28 16:43:56 daroselin nm-openvpn[19133]: Exiting
    Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin failed: 1
    Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin state changed: 6
    Oct 28 16:43:56 daroselin NetworkManager: <info> VPN plugin state change reason: 0
    Oct 28 16:43:56 daroselin NetworkManager: <WARN> connection_state_changed(): Could not process the request because no VPN connection was active.
    Oct 28 16:43:56 daroselin NetworkManager: <info> Policy set 'Auto eth0' (eth0) as default for routing and DNS.
    Suspiciously, it never seems to try to open a connection to the gateway.  (Note that the gateway's IP address never appears in the log entries.)
    I've configured the connection in nm-applet as follows:
    Gateway:  <internet IP address of the gateway/server I'm trying to VPN into>
    Type:  Static Key
    Static Key:  <the static key file>
    Key direction:  none
    Remote IP address:  10.1.0.1
    Local IP address:  10.1.0.2
    When I launch openvpn from the command line, the conf file reads as follows:
    [darose@daroselin ca]$ cat /etc/openvpn/static-client.conf
    # Sample OpenVPN configuration file for
    # office using a pre-shared static key.
    # '#' or ';' may be used to delimit comments.
    # Use a dynamic tun device.
    # For Linux 2.2 or non-Linux OSes,
    # you may want to use an explicit
    # unit number such as "tun1".
    # OpenVPN also supports virtual
    # ethernet "tap" devices.
    dev tun
    remote <internet IP address of the gateway/server I'm trying to VPN into>
    # 10.1.0.1 is our local VPN endpoint (office).
    # 10.1.0.2 is our remote VPN endpoint (home).
    ifconfig 10.1.0.2 10.1.0.1
    # Our up script will establish routes
    # once the VPN is alive.
    ; up ./office.up
    #up ./client.up
    route 10.0.0.0 255.255.255.0 10.1.0.1
    # Our pre-shared static key
    secret static.key
    # OpenVPN 2.0 uses UDP port 1194 by default
    # (official port assignment by iana.org 11/04).
    # OpenVPN 1.x uses UDP port 5000 by default.
    # Each OpenVPN tunnel must use
    # a different port number.
    # lport or rport can be used
    # to denote different ports
    # for local and remote.
    ; port 1194
    # Downgrade UID and GID to
    # "nobody" after initialization
    # for extra security.
    #user nobody
    #group nobody
    # If you built OpenVPN with
    # LZO compression, uncomment
    # out the following line.
    comp-lzo
    # Send a UDP ping to remote once
    # every 15 seconds to keep
    # stateful firewall connection
    # alive. Uncomment this
    # out if you are using a stateful
    # firewall.
    ; ping 15
    # Uncomment this section for a more reliable detection when a system
    # loses its connection. For example, dial-ups or laptops that
    # travel to other locations.
    ; ping 15
    ping 10
    ; ping-restart 45
    ping-restart 120
    ;keepalive 10 60
    ping-timer-rem
    persist-tun
    persist-key
    # Verbosity level.
    # 0 -- quiet except for fatal errors.
    # 1 -- mostly quiet, but display non-fatal network errors.
    # 3 -- medium output, good for normal operation.
    # 9 -- verbose, good for troubleshooting
    verb 3
    #verb 9
    Anyone have any idea what the problem might be here?

    If anyone's curious, I opened an upstream bug about this:
    https://bugzilla.gnome.org/show_bug.cgi?id=606998

  • Canon Pixma MG6120 Wireless printer - can't get to work with AirportExtreme

    Canon Pixma MG6120 Wireless printer - can't install mg6100swin104ejs.exe 64 bit wirelss driver on Windows 7 64bit when printer is registered to 10.0.1.X Airport Extreme. Even if I enable Advanced Port Mapping, Printer Sharing the Canon software doesn't recognize the printer if it is registered wirelessly to the Airport Extreme. Canon senior tech support and Apple senior tech support don't know how to help. Any advice for someone who was able to get a Canon Pixma Printer to work with their Airport Extreme from a Windows 7 64bit PC also connected to 10.0.1.X subnet? Your advice is greatly appreciated. The printer once online is pingable at 10.0.1.9 and I can see SD cards and browse photo's just can't get the Canon software to wirelessly activate/install.

    To print from an iPAD using the Lexmark S300 series,you need to download the LexPrint app from this link: LexPrint
    Hope this helps.

  • Can't get GD working with PHP

    Hi folks -
    I've installed 'gd' which installed its dependencies of libpng, libjpeg and freetype2 with no problems.  I've also enabled the module in the php.ini.  However, I can't get gd to work (trying to get a photo gallery plugin working in Wordpress) ... according to the phpinfo, PHP was built with the gd option.  Also I enabled error logging in the php.ini and I don't see anything in any logs about errors with the gd module.
    Any suggestions?
    thanks for any help!
    Rob K

    paddan wrote:
    "ldd /usr/lib/php/20060613/gd.so
        linux-gate.so.1 =>  (0xb8064000)
        libfreetype.so.6 => /usr/lib/libfreetype.so.6 (0xb7f81000)
        libpng12.so.0 => /usr/lib/libpng12.so.0 (0xb7f5b000)
        libz.so.1 => /usr/lib/libz.so.1 (0xb7f47000)
        libjpeg.so.7 => /usr/lib/libjpeg.so.7 (0xb7f13000)
        libc.so.6 => /lib/libc.so.6 (0xb7dca000)
        libm.so.6 => /lib/libm.so.6 (0xb7da4000)
        /lib/ld-linux.so.2 (0xb8065000)
    the libjpeg.so.7 doesnt exist. i only have /usr/lib/libjpeg.so.62 . could this be the problem?
    how would it be possible to fix it?
    seems to be related tho.
    rklingsten: how did you re-install php. so i can try the same. im a debian kind of guy so i end up doing stuff wrong
    Well, yours looks different than mine did ... you said the file libjpeg.so.7 doesn't exist, but it seems that ldd is finding it somehow.  Mine originally said "libjpeg.so.7 => not found"
    After messing with it for awhile, I simply did a pacman -S php and that fixed it which gave me a new PHP gd.so module linked to the updated libjpeg library.

  • Can't get DNSCrypt working with PDNSD

    Has anyone got DNSCrypt working with PDNSD? I have been looking for instructions with no luck so far. Would love to hear if anyone has got these working toegether.

    Deleted
    Last edited by impassive (2011-08-27 15:15:27)

  • We have a Lexmark Pinnacle Pro901 and cannot get the printer to work with airport express - any suggestions?

    Can anyone give us suggestions on how to get our Lexmark Pinnacle Pro 901 to work with airport express? We cannot get airport express to recognize the printer.

    Refresh all your devices before reconfiguring printer to connect to your computer.
    a Shutdown computer
    b Pull out printer power cord from the socket. Let it stay for at least 30 seconds then plug it back.
    c Powercycle your router (unplug your router for at least 30 then plug it back. This will not change the settings of the router. This will just refresh the device)
    d Once router is ready , put back brick at the back of the printer to turn it on
    e Wait one minute
    f Turn on computer
    Repair your disk permission: http://bit.ly/OeD7U3
    Run Cleanup tool http://bit.ly/vnukXY
    Download updated driver from Lexmark website http://bit.ly/ToA1fo
    Run firmware update http://bit.ly/AcNqbg

  • Transparency for JTabbedPane doesn't work with java version 1.5  .......

    Hi all,
    I have a tabbed pane to which i add a panel. Both tabbed pane and panel are set opaque(setOpaque(false)) and i set background image for main container. It works fine in java version 1.4.2_04 showing all the panels and tabbedpane transparent. But when it run in version jdk1.5 the transparency effect goes off.
    what is the problem? how to fix it up? please help....
    here below is the code. Take any jpg image as background.jpg.
    import java.awt.*;
    import javax.swing.*;
    import java.awt.color.*;
    public class Test extends JDialog {
         float[] white = {.99f, .99f, .99f};
         public Test() {
              UIManager.put("TabbedPane.selected",
                   new Color(ColorSpace.getInstance(ColorSpace.CS_sRGB), white, .0f));
              JTabbedPane tabbedPane = new JTabbedPane();
              Color COLOR_WHITE_TRANSPARENT_VAL = new Color(
                   ColorSpace.getInstance(ColorSpace.CS_sRGB), white, 0.0f);
              tabbedPane.setBackground(COLOR_WHITE_TRANSPARENT_VAL);
              tabbedPane.setOpaque(false);
              JPanel p1 = new JPanel();
              p1.setOpaque(false);
              tabbedPane.add(p1, "Tab 1");
              // panel for displaying background image
              JPanel backPanel = new JPanel(new BorderLayout()) {
                   ImageIcon img = new ImageIcon("background.jpg");
                   public void paintComponent(Graphics g) {
                        Dimension d = getSize();
                        g.drawImage(img.getImage(),
                             0, 0, d.width, d.height, null);
                        setOpaque( false );
                        super.paintComponent(g);
              backPanel.setLayout(new BorderLayout());
              backPanel.add(tabbedPane, BorderLayout.CENTER);
              backPanel.setOpaque(false);
              getContentPane().setLayout(new BorderLayout());
              getContentPane().add(backPanel);
              setSize(300, 300);
              setVisible(true);
         public static void main(String[] args) {
              Test test = new Test();
    thx,
    Soni

    Hi Reneto,
    We had the same problem in our project where-in we asked BASIS team to install the lower version of JAVA 1.42..
    No proper document from SAP for using lower version of JAVA.
    I hope this helps.
    Regards
    Shashidhar

  • I just purchased an ibookG4 and can't get it to recoginize my PPPOE--any suggestions?

    I just purchased an ibook G4 and can't get it to recoginize my PPPOE--sure can use some help.

    PPPoE is a method of connecting to high speed internet modems with additional authentication than just your e-mail authentication.  As such you need to check with your internet service provider who offers PPPoE what your username and password are to connect via PPPoE.  Some modems have their own built-in PPPoE authentication software, and you should check with your internet provider for your modem whether or not that is the case, and if that is accessible via a web browser connection to a router address.  In event it is, the router address based connection may not always work Safari, and you need to download Tenfourfox from:
    http://www.floodgap.com/software/tenfourfox/
    And then open the router address given.
    Most PPPoE modems support a direct connection using Apple's Network System Preference panel.
    A very good tutorial that shows how to do it is on:
    https://iihelp.iinet.net.au/pppoe_setup_for_mac_os_x_10.3_and_10.4
    Your IP address may vary from those instructions.

  • ESATA express card does not work with Mavericks. Any suggestions?

    This is an Apiotek II 300 Express Adapter. I went out to Apiotek.com and it appears the domain is for sale. Is there any way to get a software update or do I have to buy a new Express Card that allows eSATA drives to work with Mavericks. I did a backup before I upgraded using X 10.7.5 and everything worked fine. The eSATA drive is not seen using Disk Utility either.
    Thanks for any help or suggestions.

    The driver has to come from the manufacturer of the card, so your two options are to get another card or to use your full backup to go back to 10.7.5. That assumes it's a clone backup and not Time Machine.

  • My Quicken no longer works with Lion.  Any suggestions?

    My Qucken no longer works now that I have installed Lion.  Any suggestions?

    Visit Intuit for their solutions or find another application that works with Lion of which there are many. Quicken is supposed to be upgraded this year for Lion, but that's only the rumor.
    You can also downgrade back to Snow Leopard or partition the drive and install Snow Leopard on a different partition provided you can install Snow Leopard on your Mac model
    Downgrade Lion to Snow Leopard
    1.  Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button.  When the menu bar appears select Disk Utility from the Utilities menu.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area.  If it does not say "Verified" then the drive is failing or has failed and will need replacing.  SMART info will not be reported  on external drives. Otherwise, click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
    4. Quit DU and return to the installer. Install Snow Leopard.
    This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
    If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions.  If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Maybe you are looking for