I can't get soundcheck and no gaps to work

I'm burning CDs from a mix of songs I import from my CDs onto a
playlist.In Itunes preferences I have sound check and no gaps between songs
checked off.When I play the CD on my CD player the gaps are there,some
longer than others and some songs are much louder than others.I need these
options to work because I'm a pro percussionist and I use these discs to
play along to at parties and events.Any help would be appreciated.

Settings>General>Accessibiltiy>LED Flash on alerts>On. Note, it only works when the screen is locked.

Similar Messages

  • Can't get Dolby and DTS options to work

    Hi!
    Could anyone help me with my new Sound Blaster Z soundcard. I can't get Dolby and DTS options to work with my optical cabel under Cinematic tab in Pro Studio. I've googled enough, tried basically everything. Cinematic tab was never greyed out from the beginning. It either gave me intense, very high pitch noice when you acticated Dolby or DTS options or now... giving error which states:
    "The SPDIF-out (Sound Blaster Z) device is currently being used by another application. Please close any application that may be playing audio to this device and try again."
    I've re-installed drivers numerous times, tried different Windows operating system (7 and 8.1). Speakers (Sound Blaster Z) is made as default device, other stuff is disabled. I seriously don't know what to do, I'm god **** frustrated, because apart from Cinematic tab not working the sound isn't that great compared to my integrated motherboard soundchip.
    // If it matters my speakers are Edifier S530D

    Hi Kimbie,
    Are you able to play back mp3 audio tracks?
    I'm suspecting you are trying to play back encoded content.
    Do share more details here so that I can assist you further.
    Cheers,
    Colin-CL

  • Can't get in and out markers to work

    In Pro 7, I can't find the In and Out markers on some clips I've downloaded off Limewire. When I go File:New audio and record blank noise for a few seconds, the markers appear. How can I get the markers and trim down my Limewire clips? Thanks
    g5 dual 1.8 tower, 512, 160hd   Mac OS X (10.3.9)  

    I've seen a few times in the past what you are talking about. But, the in and out sections would fade in and out.
    Try doing a save as to the movie and see if this makes the player a little more stable,,,,,,,,,,,,

  • I got locked out and changed the password. it did not work and now its disabled for 60 minutes. I dont use itunes, or icloud. how can I get in and why wont it work.

    I am locked out of my iphone. I changed the password and it still wont work. I changed it again and it is now disabled. I do not use itunes, icloud. How can I get into my iphone? I have changed my password and its not working. how can I start over?

    Follow the instructions in this support document. http://support.apple.com/kb/ht1212
    Without a backup, the use of iTunes or the use of iCloud, your only choice is to restore the device as new to remove the passcode.

  • I did an hp update and now i can't get sound and my microphone isnt working, HP Pavilion dm4

    I did an HP update about 2 hours ago.  Now, I can't get any audio and the microphone isn't working.

    you can try system restore, restore point where the critical update is
    ▬JM▬

  • HT4437 Can't get iTunes and monitor mirroring to work at the same time.

    When I turn on my airplay on itunes it turns off the airplay from my monitor. I don't know how I've done it before but I sometimes can't play itunes and have it mirror my screen at the same time so I can use the visualizer. Whenever I turn one on, the other shuts off. I've done it before. Is there a specific sequence you need to run itunes and have the mirroring work too?
    Ak

    You might try a simple headphone splitter like this:
    http://www.amazon.com/Belkin-F8V234-WHT-APL-Headphone-Splitter/dp/B0000UV2AW

  • Can't get Mellotron and VSTI's To Work

    Hello, I hope someone can help. I recently purchased an HP Pavillion G7-1075DX from Best Buy. I can get the sound working for most things, but my husband is unable to get sound for the Mellotron and VSTIs, we have the latest drivers installed. I would appreciate any help or solutions.

    Hi,
    Are these (Mellotron and VSTIs) Softwares installed on your notebook or devices connected to it through Audio Channel?
    I work for HP.
    Click on the BLUE KUDOS button on the left to say "Thanks".
    Mark answer with 'Accept as Solution', if it solves your problem.

  • T42 HD replaced, can't get restore and recovery disc to work properly

    Hello Support Team!
    I purchased a ThinkPad from a company going out of business and was happy with it until the hard drive started to freak out.  I replaced the hard drive with a new Western Digital 250 GB and ordered the recovery discs from the place in Atlanta.  The discs arrived and I thought I was ready for my new computer.  I'm following all the directions in the install, changing the startup to boot from the CD.  I get the Recovery Welcome Screen and try to click on Restore Factory Settings.  At this point, I get a screen that says "In order to proceed, your system must be rebooted".  I haven't gotten past this point now matter what I try. 
    I like this little machine, but I'm afraid I can no longer breathe new life into it????
    Do you have any suggestions?
    Thanks!
    slhackett
    Solved!
    Go to Solution.

    OK, that's a good start.
    Have you wiped the drive before attempting to install the OS? If not, now would be a good time to do it.
    Download the PC Doctor for DOS bootable CD, burn a disk and boot from it.
    http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mob​iles/1ety48ww.exe
    Wipe the drive clean (under utilities), run diagnostics on the rest of the system.
    If everything comes back clean, re-try installing the OS.
    Good luck and keep us posted.
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Somehow my iTunes app has been put into the trash.  How can I get this and all of the stuff that was in it back to my Application folder?  I try to drag it out of trash, but it won't work.

    Somehow my iTunes app has been put into the trash.  How can I get this and all of the stuff that was in it back to my Application folder?  I try to drag it out of trash, but it won't work.

    Also, when I do try to drag it out of the Trash to put it back into Applications (on the Finder sidebar), it asks me to authenticate with the administration password.  I enter it, and then a window appears saying that I can't do that because I do not have permission to modify iTunes.  Please help.

  • How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

    How can I get photoshop and Illustrator CS5? I cannot see it anywhere. My computer(PC) can only use CS5

    If you do not own a license for CS5 there is not much you can do to get it thru Adobe.  They only sell current versions of their software (CS6 or Creative Cloud).  You would need to find a third party vendor and take your chances with them.
    If you do own a CS5 license you can download the software thru the following page and use your serial number to activate:
    CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  • I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

    I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

    It actually sounds like the warp text window is opening off screen.
    Resetting the photoshop elements 10 preferences should fix it.
    *Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
    *Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
    *Press Yes

  • I can not get iPhone and iPad calendar to sync.  Help

    Help. I can not get iPad and iPhone calendar to sync

    Please also check, if the appointments you already have entered on one device are stored in a iCloud calendar or only local or in another account. Therefor just open the calendar app, then open an existing appointment, click on "Calendar" and then check, if it is really an iCloud calendar where the appointment is stored.

  • Can't get panels and preferences to save with MacBook Pro

    I can not get panels and preferences to save using Illustrator CS6 on a MacBook Pro. When I close out of AI the settings/preferences don't stay. Please help.
    Thank you
    Dan

    Have you tried rebuilding preferences?
    Working in a new user account?
    Workspaces are saved in your local user folder. If workspaces are not saved, this could be problems with either Illustrators preferences in general or your user account.

  • Can't get headers and footers to work - after I enter something (page

    I can't get headers and footers to work - after I enter something (page #, etc) it will show up on the first page but not subsequent pages - what am I doing wrong?!

    Inspector > Layout > Section > Use previous headers and footers
    Peter

  • HT4108 I have a apple component AV TV out cable (red, green,blue + red,white) and have had this connected to TV for about 6 months working fine.  I moved the TV disconnected cables to move now I can only get video and no sound back on TV.  Any suggestions

    I have a apple component AV TV out cable (red, green,blue + red,white) and have had this connected to TV for about 6 months working fine.  I moved the TV disconnected cables to move now I can only get video and no sound back on TV.  Any suggestions ?

    No answer but marking as answered because I want to clear my unresolved questions.

Maybe you are looking for