I can't get the dashboard to come up.

I can't get the dashboard to come up with out manually clicking on it in the dock. It was set to the middle mouse button but it changed. I went in system prefs and went to Exposé and spaces and put it as the middle mouse button but it didn't work... I still cannot open it with out clicking on the icon in the dashboard.

You may want to try repairing permissions.

Similar Messages

  • I have a iphone 4s and i can't get the charger to come out of the phone its stuck on one side and will not come out

    I Have a iphone 4s and can't get the charger to come out...it was hard to get out the time before but i thought it was just me so then i charged it last night tryed taking it out and it is stuck on one side and will not come out...any suggestions on how to get it out?

    You will just have to carefully pull harder. Push the other side back in so it is aligned, then pull it straight out.

  • I can't get the sound to come through my headphones

    The sound on my computer is working just fine but when I plug my headphones in, the sounds still comes through my computer. I know it isn't the headphones because I have tested them on other devices and they work fine.

    Jeff,
    Unless I'm misunderstanding something technical, I think we're talking about two different things. Yes, I understand your point about copying DVD's, copy protection, etc. But the main point of this, and other, threads is not about breaking copy protection; it's about successfully converting video to put it on iPod, and retaining the audio. I have a bunch of short, non-copy protected, non-copyrighted video clips on my computer that the Conversion tool in iTunes simply won't convert with audio. That's where the "muxed" thing comes into play, or whatever it is. My clips vary: some are .mpg, some are .avi, whatever. I don't think iTunes successfully converted a single one of them. I ended up downloading some third party software that I learned about in these discussion forums.
    That's my point. Whatever it is that these third party programs do, why can't Apple make iTunes do it?
    Am I missing something? Are what these programs doing tied into breaking copy protection? Is there some link between "de-muxing" (is that right?) and removing copy protection? I plead ignorance on this one.

  • Firefox 5 shows on Win7 Taskbar but I can't get the window to come up.

    Hi! I've tried rebooting, checking in my Task Manager to close and/or open FF, but I can't get FF to open any further than simply showing up on my taskbar.
    Any help would be appreciated.
    Thanks,

    You may want to try repairing permissions.

  • Getting the dashboard prompt value

    Hello,
    I there a way on how can i get the dashboard prompt value when using other operators beside equal/is in. It seems that you can only set a presentation variable using the equal/is in operator.
    Also how can i get prompt value when using multi-select control?

    Hi. Yes, presentation variable is only for is equal to/is in.
    But no need to use other operators ( is less than or equal to, etc) if you want to write data in presentation variable, use equal/is in if you want to show data that is for example less and set presentation variable and in the report instead if IS PROMPTED write advanced SQL filter like:
    TABLE.COLUMN <= '@{pv}'
    You asked also how can to get prompt value when using multi-select control?
    No way to do that. But what do you need that information for. Lets say that you are able to do that and you put multiple values from multi-select into variable, where do you need to present that data? In the report? No need for that because the report is already filtered by it.
    Also check this one:
    Using multiple values row wise session variables in dashboard prompts and requests
    http://108obiee.blogspot.com/2009/10/using-multiple-values-row-wise-session.html
    Regards
    Goran
    http://108obiee.blogspot.com

  • How can I get the current user an  resource context  in a portal JSPDynPag

    How can I get the current user (com.sapportals.portal.security.usermanagement.IUser?)an the resource context  in a portal component (JSPDynPage)?
    Thanks.

    Hi Jon,
    Here is the code to get the current user and resource context in your JSPDynPage:
    IPortalComponentRequest  currentRequest  = (IPortalComponentRequest)pageContext.getAttribute(javax.servlet.jsp.PageContext.REQUEST);
    com.sapportals.portal.security.usermanagement.IUser contextUser = (com.sapportals.portal.security.usermanagement.IUser) currentRequest.getUser().getUser();
    ResourceContext resourceContext = new ResourceContext(contextUser);
    Greetings,
    Praveen Gudapati
    p.s. points are always welcome for helpful answers

  • My iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

    my iphone is broken,and i came to store to change a new one today. When I come home, I found I lost my backup and may be mistake is made during before backup.The information in my previous iphone is really important for me? how can I get the backup back?

    If you don't have a backup then the only possible solution is to go back to the store and see if they can get your old phone and create a backup of that. I know very often that Apple employees will wipe the returned iPhones clean before shipping them back to wherever they ship them.
    When you say your old phone was "broken" does this mean it is dead and won't turn on?
    Do you have a Time Machine backup of your computer, or a clone that might have this info on it?
    Other than that I hate to say you may be out of luck. Time Machine and/or a cloning program performed regularily will inevitably save your a** in situations like this.
    Good luck
    PM

  • I have a 10.2.8 os. I had opened up the AOL logo on the bottom bar. Two aol boxes came up. I can get them to go away for a short time and then they come back. I have not used AOL for 6 years. How can I get the boxes to go away?

    I have a 10.2.8 os on a G4 desktop. A week ago I clicked on the AOL icon in the bottom bar. I have not used AOL for six years. Two aol boxes came up. I can not get the boxes to go away for long. They may go away for 15 minutes and they come back  while I am working. How can I get these  aol boxes to go away?
    I will be upgading to Tiger; 10.4.

    Right click on the AOL icon and select move to trash.

  • Since installing the last iPhoto update sharing a photo via e-mail opens a google e-mail format instead of an Apple Mail format.  How can I get the Apple Mail format to come up when I click on share?

    Since installing the last iPhoto update sharing a photo via e-mail opens a google e-mail format instead of an Apple Mail format.  How can I get the Apple Mail format to come up when I click on share?

    iPhoto preferences - set the email client to Mail
    LN

  • TS3648 great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp

    great, but my MBA did not come with an installion disc, only a tiny jump drive that is not recognized by windows; and I can't get the contents of that burned to a DVD either. So how the heck do I get the drivers into Windows 7? My MBA has bootcamp 3.0.4.

    Here's what I get:
    lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384
    inet 127.0.0.1 netmask 0xff000000
    inet6 ::1 prefixlen 128
    inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1
    gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280
    stf0: flags=0 mtu 1280
    en0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    ether 00:11:24:7d:e7:1e
    media: autoselect (none) status: inactive
    supported media: none autoselect 10baseT/UTP <half-duplex> 10baseT/UTP <full-duplex> 10baseT/UTP <full-duplex,hw-loopback> 100baseTX <half-duplex> 100baseTX <full-duplex> 100baseTX <full-duplex,hw-loopback>
    en1: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500
    inet6 fe80::211:24ff:fe28:2e71%en1 prefixlen 64 scopeid 0x5
    inet 169.254.115.141 netmask 0xffff0000 broadcast 169.254.255.255
    ether 00:11:24:28:2e:71
    media: autoselect status: active
    supported media: autoselect
    fw0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 2030
    lladdr 00:11:24:ff:fe:7d:e7:1e
    media: autoselect <full-duplex> status: inactive
    supported media: autoselect <full-duplex>

  • I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from the we sites, which did not work and now I can not get the computer to reboot the gray screen comes on and if a shift c I get a load bar and it goes half way and help

    I have IMac 10.7.5 Lion I use I forgot the password and I did a few fixes from web sites, which did not work and now I can not get the computer to reboot the gray screen comes on with the apple and if a shift+c, I get a load bar and it goes half way and stops, I can get into the black screen area with the hard drive info
    I did the following:   mount -uw /    rm/var/db/.AppleSetupDone    shutdown/uses/us  reboot Ok I know I should not have, but now I need help to reboot and hopefully not lose everything on the desk top, Linda Markle

    You did the wrong things. In the future it's a good idea to remember not to do something when you don't know what you are doing and what happens when you do it.
    Forgot Your Account Password
    For Lion, Mountain Lion, or Mavericks
        Boot to the Recovery HD:
    Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
         When the menubar appears select Terminal from the Utilities menu.
         Enter resetpassword at the prompt and press RETURN. Follow
         instructions in the dialog window that will appear.
         Or see:
           Reset a Mac OS X 10.7 Lion Password
           OS X Mountain Lion- Reset a login password,
           OS X Mavericks- Solve password problems,
           OS X Lion- Apple ID can be used to reset your user account password.

  • Accidentally deleted an App Store app.  how can I get the icon back on my home screen?  when I search for it in the App Store it comes up 'open'. thanks.

    accidently deleted an app Store app.  how can I get the icon back on my home screen?  in the app store it comes up 'open' instead of install.

    What happens if you tap on open?
    Remember, if you ever want to find an app quickly, you can slide all the way to the left (iOS 6 and lower) or pull down (iOS 7 and later) to get to an app.
    If you know for certain that you have deleated the app, please try restarting your phone. There are many ways to do this, but the safest way would be to hold down the power button and then slide to power down.
    Once powered down, restart and try to find the icon on your screen. If you still can't find it, go into the App Store and then find the app you were trying to access. It should have an iCloud download symbol since you've purchased it before, rather than saying "install."

  • I can't get the pogo app to come up on my iphone because of the new update

    I can't get the pogo game app to come up on my iphone 5s and ipad air because of this new update i did the fix today and still not working

    kathyfromjacksonville wrote:
    its ok ill ask someone else .. no reply is needed ...
    And how's that working out for you?

  • I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the firefox homepage to come up. How can I get the Yahoo homepage off and get the firefox homepage on?

    I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the Firefox homepage to come up. I have tried to reinstall Firefox, but the Yahoo homepage still comes up. How can I get the yahoo page off and get the Firefox page back on?

    Here are instructions to [[How to set the home page#w_restore-the-default-home-page|restore the default home page]].

  • I can't get the zoom slider to come up, I keep tapping the screen but a box keeps appearing

    I can't get the zoom slider to come up, I keep tapping the screen and the zoom button does not appear only a little square box and nothing seems to happen.  Does anyone know what I am doing wrong? It used to appear when I tapped the screen.  Thanks

    Meg St._Clair wrote: Don't tap; pinch.
    I have tried 50 times to get the Zoom Slider to appear on my new iPhone 5.
    It *never* does.
    I pinch in, out, round and round. I pinch fast, slow, medium. I am gentle, I am rough, shout, I shake, I tap, I touch, I pull, I push, I squeeze, I rotate, I caress.
    NOTHING WORKS
    No Zoom Slider under any circumstances. Believe me, I have tried everything.

Maybe you are looking for

  • Email in CRM but not showing as tracked in Outlook

    Hi Do others come across this where people try and track an email in Outlook but find it's already in crm but the 'Track in CRM' button and icon in Outlook do not show this fact. Is there anything that can be done about this? Thanks

  • How can I make my text in a circle?

    I am designing some new biz cards, and I saw some that were a circle and SUPER cute. I'd like to create my own. How do I create my text in a circle? I'd like to have some info in the middle of the circle, and some actually bending around the circle.

  • How do I delete a blog?

    I have deleted all its posts etc.

  • Javac will not compile

    My proplem is after upgrading to JDK6 Update 16 with Java EE to my root directory I cannot get javac to compile. java works well with existing programs. When I try to use javac with HelloWorldApp and other java files I get error message below. c:\>ja

  • View email in HTML?

    My email setting is Plain Text, is there a way to change this to HTML? When I went to the settings menu, it seems greyed out therefore I didn't have any options.