I can't get the entire context in my box!

my family has several ipods and an iphone, when i go to itunes to view ANYTHING the main screen runs to the edge and i can't scroll over to access certain tabs. for instance, if i want to make a ringtone the tab to complete the action is to the far right but it isn't in view to me. i just bought a new nano for my wife and i'm stuck on the registration page because i can't advance. again, the tab is on the right and i don't have access to it! i tried maximizing and minimizing the box but nothing helps. any suggestions?

Open the Control Panel, click on Displays, and set the monitor resolution to at least 1024 by 768.
(28389)

Similar Messages

  • I can't get the entire serial number off my 5s.I do not have the original box or paperwork.All I find at ABOUT is the first nine letters and numbers followed by three ...-please help.

    5s,64 GB, with IOS 8.1.3, seems to have battery draining problem I just became aware of after just acquiring this phone. I can't get the entire serial number off the phone after going to GENERAL,ABOUT, and down to serial number. I only get the first nine letters and number with three ...---Need  to get this info to check with Apple and see if this phone indeed has this draining  battery issue and get it repaired. Tried using info from the Apple site to get the entire serial number and couldn't get it to work. Thanks for all help.

    rjcurtis wrote:
    ---Need  to get this info to check with Apple and see if this phone indeed has this draining  battery issue and get it repaired.
    What “draining issue”?
    The iPhone 5 has a battery replacement program but it does not include the 5S.
    I can't get the entire serial number off the phone after going to GENERAL,ABOUT, and down to serial number. I only get the first nine letters and number with three ...---
    See this -> Find the serial number and other information for your iPhone, iPad, and iPod touch - Apple Support
    "On most iOS devices, you can tap Settings > General > About to see your device's serial number, IMEI/MEID, and ICCID. If you're using iOS 6 or later, you can tap and hold on the number to use the copy option, then paste this information into Apple registration or support forms."

  • I can't get the entire update file to download, 995mb then stops.

    995mb then stops. I can't get the entire file to download and this is a fast connection, says 23 minutes to download the file, but stops short. I have tried about 15 times over the last 7 hours, yet it always stops at 995mb.
    I've tried over wireless and wired, and wired is very fast, as I mentioned, it shows only 23 minutes to download the entire 5.3gb file. but it never gets that far. I'd wonder if we have a data cap on the network (work), but it allows me to download the same 995mb over and over.
    if anyone has experienced this, I'd like to know what you did to get it to download. thanks

    Downloading Mavericks requires a high speed broandband connection.
    Check your download speed here > Speedtest.net - The Global Broadband Speed Test
    Anything less than 15Mbps is too slow to download the 5GB file which may why it's timing out at 995Mbps.
    You may need to contact your ISP for upgrade options.

  • How can I get the servlet Context from a WebService Implementation?

    I have made a webservice endpoint, using the conventional way (WSDL->wsimport->Java interface->implementation) . I need to get the servlet context below the implementation class. I haven't found any way to get the servletContext though. Any clues? Any help will be greatly appreciated.

    yes  i can found the words's unicode form Cmaps where may be at the type of tounicde and another Cmaps table just like "Adobe-GB1-GBK-EUC" ,but when the word dont have either of them how can i do? when i write a chinese word "一",it just the winansi encoding ,  there is not Cmap for me to use to change the "G208f" to the word "一"'s unicode value.
                   best wishes      thank you very much

  • Audio books are only partial, I can't get the entire book halfway through it starts beeping

    My audible audiobooks are not being completely syncing.
    Of a 33hour book I only get half then my iPod starts with a skipping noise.
    I tried using an enhanced format same thing.
    I can listen to the entire book on my computer, just not my iPod.

    Hi Wshintani,
    Welcome to the Support Communities!  Are you working on a PC or a Mac?  Have you had any playback issues with other audiobooks? This troubleshooting article is for Windows, but it has some pertinent information regarding updating to the latest version of iTunes and updating drivers.  Also, be sure to confirm you have anough space available on your iPod nano for this audiobook.
    iTunes and QuickTime for Windows: Audio does not play or plays incorrectly
    http://support.apple.com/kb/ts1362
    Cheers,
    - Judy

  • I added a theme, but it only appears in the toolbar, not the entire screen (new tab page). How can i get the entire theme to show (fullecreen)?

    my theme is only showing behind the toolbar (tabs, search bars,etc.) when i go to the "Mozilla Firefox start page", my theme is still only in the toolbar, and the rest of the page is white. My theme is also only showing such small pieces of the theme chosen that most of the time you cant even tell that it is a fox in the corner. Is there a way for me to make my theme appear across the full screen?

    ok, since you are saying that my theme is a lightweight theme, are there "heavy weight themes" that would also theme the 'content' areas?

  • How can I get the entire PS cc 2014 software to be visible on Mac 30" with OS Maverick?

    I have tried reopening software, looked in preferences, tried changing screen resolution, etc. This situation suddenly happened and is the only cc software affected in this manner.

    Two ideas:
    Tap the green resize button if you see it. It should make the Photoshop app fill the screen.
    Or under the CC 2014 Window menu, check and un-check the Application Frame. That should also make the Photoshop app fit the screen.

  • I bought an album and one of the songs did not download completely.  It shows that the song is 3:17 seconds but only got 40 secs. of it.  How can i get the rest of the song back?

    I bought an album from itunes and one of the songs did not download completely.  It shows in the player that it is 3:17 but only plays for 40 secs.  How can i get the entire song back?

    I'd report the problem to the iTunes Store.
    Log in to the Store. Click on "Account" in your Quick Links. When you're in your Account information screen, go down to Purchase History and click "See all".
    Find the item that is not playing properly. If you can't see "Report a Problem" next to the entry, click the "Report a problem" button. Now click the "Report a Problem" link next to the item.
    (Not entirely sure what happens after you click that link, but fingers crossed it should be relatively straightforward.)

  • How can I get the context-parm from a web.xml file using struts?

    Hello:
    I need get the context-param from the web.xml file of my web project using struts. I want configurate the jdbc datasource connection pooling here. For example:
    <context-param>
    <param-name>datasource</param-name>
    <param-value>jdbc/formacion</param-value>
    <description>Jdbc datasource</description>
    </context-param>
    and then from any Action class get this parameter.
    Similar using a simple server can be:
    /** Initiates new XServlet */
    public void init(ServletConfig config) throws ServletException {
              for (Enumeration e = config.getInitParameterNames(); e.hasMoreElements();) {
                   System.out.println(e.nextElement());
              super.init(config);
              String str = config.getInitParameter("datasource");
              System.out.println(str);
         public void doPost(HttpServletRequest req, HttpServletResponse res)
              throws ServletException, IOException {
              // res.setContentType( );
              System.out.println("Got post request in XServlet");
              PrintWriter out = res.getWriter();
              out.println("nada");
              out.flush();
              out.close();
    but only this works for init-params, if I use
    <servlet>
         <servlet-name>MyServlet</servlet-name>
         <display-name>MyServlet</display-name>
         <servlet-class>myExamples.servlet.MyServlet</servlet-class>
         <init-param>
         <param-name>datasource</param-name>
         <param-value>jdbc/formacion</param-value>
    </init-param>
    </servlet>
    inside my web.xml. I need something similar, but using struts inside the action class for that I can get the context-params and call my database.
    Thank you

    To get context parameters from your web.xml file you can simply get the ActionServlet object from an implementing action object class. In the perform (or execute) method make the following call.
    ServletContext context = getServlet().getServletContext();
    String tempContextVar =
    context.getInitParameter("<your context param >");

  • I created a playlist with 100 songs.  I want those 100 songs played using the shuffle option.  This no longer works in iTunes version 11.1.5.5  How can I get an entire  playlist to paly one song after another by using the switch option?

    I created a playlist with 100 songs.  I want those 100 songs played using the shuffle option.  This no longer works in iTunes version 11.1.5.5  How can I get an entire  playlist to paly one song after another by using the switch option?

    You're welcome.
    Going back to your original post:
    5) Tried running Itunes in 'safe mode', running itunes as an administrator..nothing.
    Was that iTunes' safe mode as opposed to Windows' safe mode? iTunes safe mode is invoked by holding down CTRL+SHIFT immediately after clicking the icon to launch iTunes and continuing to hold until this message pops up:
    Click continue, then close iTunes and reopen. With luck iTunes now opens normally every time.
    tt2

  • When I am on my home screen on the iPhone, swipe left to the search page. Put a letter in the search field. then scroll down. eventually you get to all your texts previously deleted or not. The are all there. How can I clear the entire text from the phone

    When I am on my home screen on the iPhone, swipe left to the search page. Put a letter in the search field. then scroll down. eventually you get to all your texts previously deleted or not. The are all there. How can I clear the entire text from the phone

    When I am on my home screen on the iPhone, swipe left to the search page. Put a letter in the search field. then scroll down. eventually you get to all your texts previously deleted or not. The are all there. How can I clear the entire text from the phone

  • Can you get just your rear camera lens replaced or do you have to get the entire back screen replaced?

    I recently dropped my phone for the first time, and neither of my screens cracked but my rear camera lens did get scratched badly. I can't use it at all to take picture. It just shows up as a fuzy screen when I open my rear camera. My iPhone isn't even a year old yet. Now, I need to know if I can get just the rear lens replaced or if I have to get the entire back screen replaced? I also need to know if anyone knows how much either of these would cost? Or is it free with the one year warrenty?

    You would have to get the rear glass panel replaced, it is one part. Normal warranty does not cover accidential damage. You can do it yourself for 50$:
    http://www.ifixit.com/Guide/Replacing+iPhone+4S+Rear+Panel/7110/1

  • How can I get the web application's context root?

    I have a web application, which is defined in Tomcat's server.xml:
    <Context path="/cbes" docBase="e:\work\GM\code\CBESCurrency" debug="0"
    reloadable="true" crossContext="false"/>
    And I hava a servlet in this web application.
    How can I get the context root of the web application?
    in this example: reture should be "cbes" or "/cbes"
    how?
    thanks alot.

    getContextPath() in javax.servlet.http.HttpServletRequest

  • How can I get the current user an  resource context  in a portal JSPDynPag

    How can I get the current user (com.sapportals.portal.security.usermanagement.IUser?)an the resource context  in a portal component (JSPDynPage)?
    Thanks.

    Hi Jon,
    Here is the code to get the current user and resource context in your JSPDynPage:
    IPortalComponentRequest  currentRequest  = (IPortalComponentRequest)pageContext.getAttribute(javax.servlet.jsp.PageContext.REQUEST);
    com.sapportals.portal.security.usermanagement.IUser contextUser = (com.sapportals.portal.security.usermanagement.IUser) currentRequest.getUser().getUser();
    ResourceContext resourceContext = new ResourceContext(contextUser);
    Greetings,
    Praveen Gudapati
    p.s. points are always welcome for helpful answers

  • How can to get the context of Repository Service?

    Hi All,
    How can we get the context of Repository Service?
    I am able to get the repository service using the below given code.
    IRepositoryServiceFactory sf = ResourceFactory.getInstance().getServiceFactory();
    IRepositoryService service=sf.getRepositoryService(IRFServiceWrapper.KEY);
    But want to know how to get the context of this RepositoryService.
    Regards
    George

    Hi George,
    Is this what you're wanting:
    IPortalComponentRequest request = (IPortalComponentRequest) this.getRequest();
    IUser user = (IUser)request.getUser().getUser();
    IResourceContext resourceContext = new ResourceContext(user);
    // Get the Service
    IRepositoryServiceFactory repServiceFactory = null;
    try {
      repServiceFactory = ResourceFactory.getInstance().getServiceFactory();
    } catch (Exception ex) {
      ex.printStackTrace();
    if(repServiceFactory == null) {
      System.out.println("Repository Service Factory is null!!");
    // Check to make sure that the folder that was passed in is valid.
    RID folderRID = new RID(startFolder);
    try {
      IResource resource = ResourceFactory.getInstance().getResource(folderRID, resourceContext);
    } catch ( InvalidUriException ie ) {
      System.out.println("in the InvalidUriException catch");
      ie.printStackTrace();
    } catch ( Exception e) {
      System.out.println("exception: " + e.getMessage());
      e.printStackTrace();
    If this isn't what you're looking for, maybe you could tell us what specifically you're trying to do.
    Thanks!
    -StephenS

Maybe you are looking for