I can't get the homepage to switch from MySpace to a preferred site - MySpace has hijacked the homepage how do I disable MySpace?

I had Myspace set as my homepage on Firefox. I now want to change it. I go to tools and then options and then change to what I want it and click on ok. But when I open the browser again it has reverted back to Myspace. I have tried disabling cookies for Myspace. I have cleared everything out. I even tried changing it to the default homepage of Mozilla but it always reverts back. How do I get ridof Myspace for good?

See:
* [[Preferences are not saved]]
* [[How to set the home page]]

Similar Messages

If you bought a used ipod and activation icloud is locked and can not get the owner how do you fix the ipod

If you bought a used ipod and activation icloud is locked and can not get the owner how do you fix the ipod

Hi Blands02!
Here is an article that will help you troubleshoot this issue:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Can't get router working after switching from DSL to Cable broadband???

I have a WRT54G v.5
I just switched from dsl service to cable broadband. I can't get my router to work. I hooked it back up just as the dsl modem used to be. there is an ethernet cable that goes from the cable modem to the router. then an eithernet cable that goes from the router to the computer. this does not work. If I just take the router out of the loop and run an eithernet cable straight from the cable modem to the computer it works fine. so the cable internet service is working fine up to the modem. The router is the problem. I have restarted both the computer and the router. so that rules that out. can you help me?

Open the setup page of the router by launching an Internet Explorer Browser and type the address bar, 192.168.1.1 and press enter. When it prompts for the username and password, leave the username field empty and provide password as admin and click on ok.On the main setup page the ""Internet Connection Type"" should be on ""Obtain IP Automatically - DHCP “. Click on the Save Settings button.Now click on the sub tab ""MAC address clone"".- Click on enable.Click Clone & click save settings
Check WAN Ip on Status page of router .... If getting Valid Ip .... try going online...If not ... power cycle for 4-5 minutes & then, try going online.

I want to change my security questions (that I don't remember) but the recovery mail is misspelled wrong by the server (I can't get the email) how I can change done recovery mail without security questions?

So, yesterday I wanted to buy 2 albums but it was the first buy in this device (I reset mi iPad 2 months ago) so it asked me for my security questions to confirm my identity but since is been a long time since I "used" me security questions I don't remember it so, eventually, I asked for the email to change either my password or my security questions but the email has 2 misspelled letters by a server error instead of being hotmail.com is writted a*******@hormail.clm sop I can't get any email, I already tried changing the mail email and the secondary email but still is the same mail a*******@hormail.clm so how I can change this without my security questions?

Security questions:
https://discussions.apple.com/docs/DOC-4551
http://support.apple.com/kb/HT5312
This is also useful:
http://www.macworld.co.uk/ipad-iphone/news/?newsid=3463233&olo=email

Can i get the Detail how to install the oracle 11 g

may i know how to install oracle 11 g step by step
and how to connect to database server

994740 wrote:
may i know how to install oracle 11 g step by step
The complete documentation library -- including the very fine Installation Guide -- is found at tahiti.oracle.com.
and how to connect to database serverBy using a client program. The most basic of such is sqlplus. It comes as part of the installation.

I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the firefox homepage to come up. How can I get the Yahoo homepage off and get the firefox homepage on?

I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the Firefox homepage to come up. I have tried to reinstall Firefox, but the Yahoo homepage still comes up. How can I get the yahoo page off and get the Firefox page back on?

Here are instructions to [[How to set the home page#w_restore-the-default-home-page|restore the default home page]].

I can't get the camera to switch to video on the new iOS7. Anyone experience this?

I can't get the camera to switch to video on the new iOS7. Tapping it, but it's not responding.
Anyone experience this?

Thanks! I went to the new user guide. Have to slide screen to choose function

My iPad2 side switch is acting up, it will only allow me to have either sound or rotate. If I unmute the rotate won't work, if I mute the rotate works. How can I get the iPad to unmute and rotate? I have restored, downloaded updates and rebooted.

My iPad2 side switch is acting up, it will only allow me to have either sound or rotate. If I unmute the rotate won't work, if I mute the rotate works. How can I get the iPad to unmute and rotate? I have restored, downloaded updates and rebooted.

You should be able to control the function that the side switch isn't controlling via the left-hand end of the taskbar : http://support.apple.com/kb/HT4085 - is the icon that appears there (notification mute or rotation lock) indicating that that function is 'off' ?

Just installed iOS5 and iCloud on iPod Touch, and in Settings, I can't get the on/off switch to stay on for Automatic Downloads.

I just installed iOS5 and iCloud on 4th gen iPod Touch. All is well EXCEPT that I can't get the on/off switch in "Settings" to stay on for automatic downloads of music and apps. Has anyone else had this problem? Am I missing some previous set-up step?
Thanks for your help.

to enable icloud you tap "settings" -> "icloud". Make sure you sign in with a valid iCloud Apple-ID. Then you can turn on the various features that are part of iCloud.
Video or Music Syncing is not a feature of it. Instead you use itunes in the cloud which let's you re-download purchases. This however depends if the service is available in your country.
Worldwide only purchased books and apps are supported for free-of-charge-redownload on your devices.

I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs?

I have all my music on an external media drive that has crashed. How can I get the music of my ipod touch back onto the comupter without loosing the music when it syncs. in order to start rebuilding my music collection?

You should be able to recover the media with the tips in this post from forum regular Zevoneer but I'm not sure what the implications are for your application settings. You can probably transfer your purchases into a newly authorised library, backup the device, recover any other media using third party tools, then restore the device from the backup. That should switch the assocation of the device to the new library but it is not something I've personally tested.
When you get it all working, make a backup!
tt2

I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i c

I just got iphone 5c and i am not happy with it. It uses to much data and i don't even know how. I can't get the ringtones i want for my contacts.I got it on my free upgrade but i want to take it back and get something else but where i got it they say i can't because i don't have the earbuds and i have serches or them. now i am suck with a phone i don't like at all until my next upgrade. this is very dishearten

1. If you are this unhappy with that phone, and the lost earbuds is the only thing stopping you from taking it back, why do not just buy some earbuds. That way you can get rid of that phone. It all depend upon how much you want to get rid of that phone.
2. Yet if you are stuck with that iPhone, here is something might help you to control the data usage. By design, iPhones do turn off WiFi when they go dormant. So if a download is in progress and so forth when the phone goes dormant, it will switch to use cellular data, if this setting is left on. Therefore, from multi-sources I have learned that if you keep your iPhone connected to a power source, then it will stay connected to the available WiFi.

I have a problem with my Internet Security and the new Firefox, where can I get the previous version which I had before my system crashed?

Hi I use CA Internet Security Suite which checks ALL pages and searches, but it does not work with this version, also I wish to use Goggle Toolbar which ALSO does not work with this version where can I get the previous version? As my harddrive crashed I have had to install windows 7 and this version doesn't seem to allow me to change my homepage, why is this? Cheers Ernest

You can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html
Mozilla are working to prevent Mac users with non-compatible systems from getting the notification about Firefox 4, and also not displaying the "Download Firefox 4" button on http://www.mozilla.com

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help!

I have connected my new Macbook Air to my existing Samsung large external monitor with a VGA adaptor but I can't get the full mac desktop to display. No icons but then websites are coming up. Help! Further info: I am a complete newbie to Mac. Had three macs prior to 2000 then four PCs. Just come back and struggling a bit with the unfamiliarity. On my old PC laptop I could simply switch from the laptop screen to the large external monitor (and back) with the F4 function key. While I can get the background image from my MBA to display, that's it. Until I noticed on the far left of the external monitor, the very edge of one of the web pages I was on. So Idragged it over to display in the centre. But that's all that's there. And now I have gone out of those web pages but they are still displaying on the monitor. There is some wierd disconnect. I'm sure it is just a setting thing. Will keep searching for answer but any advice welcome!

Your dsplay is getting extended onto the external monitor. Chcnage the setting to duplicate it or only display on the external monitor and you should be fine,
Let me know if this worked for you.

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your repl

How can I use a SCH-LC11 device in CHINA which bought from ebay. I am not Verizon customer but I prefer to using your 4G LTE Router . How can I get the unlock code? The device may have a bad ESN but I only use it in CHINA. Kindly looking forward your reply. Thanks!

It's good to read Antoniad's post. It reassures me that I can use my new iPad as an international communication device which is the reason I purchased the thing. However, I called Verizon today (my provider of cellular data) who told me that I can't just pop in a SIM card as you suggested. He also said that he was from the "Pre-Pay" division of Verizon and he was certain that I couldn't do what I planned to do. I was extremely disappointed as I had called Apple prior to buying the iPad and I read the algorhythm on the website for choosing an iPad before purchasing. Those sources were quite specific and the information seemed clear. I would be able to use my iPad to communicate through cellular connections while traveling on the road, literally, abroad. I was told that I could pop in a data card wherever I was, just as you indicated in your message above, and voila I was good to go. The Verizon rep definitively rained on that parade, but said that I might be able to do this if I have a "Post-Pay" account, a different area of Verizon. I haven't had the chance to talk to this division yet, so I looked to Apple's Support for answers. Maybe I will find out that I can use my iPad as an international communication device while traveling on the road afterall, however, it appears I may need a different type of account (Post-Pay), something I was never warned about. Can I switch to this kind of account? I don't know. I have to find out. If you have any information about this issue, it would be good to share since I strongly suspect there are others who bought the iPad for the same purpose that I have.

How can I get the direction handles to show up for the Position attribute?

How can I get the direction handles to show up for the Position attribute?
I have CS3 and I did the formentioned test and was able to make the handles work for the scale attribute but they don't seem to show when editing the position values.
*I am in the graph editor looking at the "value graph"
*I select the keys and convert the keys to auto bezier (I also tried the ease in and out buttons)
*It changed the graph the way you might think (no longer linear) however the handles are not showing to edit further.
*I also tried using the "convert vertex tool" (part of the pen tool) and still no luck getting those handles.
*the handles only show up in the speed graph but that does me no good.
Please help!
THANKS

I don't have CS3 installed on any of my machines any more but your value graphs for position should look something like this:
There are no handles for position in the Graph editor. You adjust the position curve by editing the motion path in the composition window. Press the G key to bring up the pen tool, then use the modifier keys Crtl/Cmnd and Alt/Option to temporarily switch between select and convert vertex to adjust the paths. Changes will be reflected in the value graphs. You will get editable handles with scale and rotation because these are not spatial properties. Spatial properties, position, Anchor Point, all XY & Z coordinates are edited in the comp window or in the layer window after revealing the properties. IOW, you edit anchor point position paths by opening up the layer window and choosing Anchor Point from the display options.
The Manual isn't wrong. Here's a link to the live docs.

Can't get F7 external monitor switch to work on 3000 N100

I am trying to connect an external monitor to my Lenovo 3000 N100 but I can't get Fn-F7 to switch monitors. It does nothing at all. Can anyone help me? Running XP SP3.

Hi Guys. Thanks for your help. I've had a little success but still not fully working. I've done a complete update, including BIOS, Power Manager, Power Management Driver, System Interface Driver, Hotkey Driver and finally Presentation Director. Presentation Director wasn't working at all before, and now it is. It comes up when I press Fn-F7 and gives me the option to switch between "Notebook Only", "Same Display on notebook and monitor", "Extended display across notebook and monitor" and "Extended display with "Presenter View Enabled" (I don't understand the last one, it seems to be the same as the next-to-last).
However if I click "Fn-F7 settings" and select "Switch display output from the Notebook LCD to external monitor to both (and then repeat)" then subsequent Fn-F7 presses do nothing at all.
It has given me what I need, which is the same display on both monitors, but it would be nice if the Fn-F7 toggle worked as well.
It would also be nice if I could switch to external monitor only, which I still can't do.
Any more suggestions?

I can't get the homepage to switch from MySpace to a preferred site - MySpace has hijacked the homepage how do I disable MySpace?

Similar Messages

Maybe you are looking for