I can't get the pictures to print in aliagment

my pictures all print to the left of the paper

Try this
*http://kb.mozillazine.org/Images_in_messages_do_not_appear

Similar Messages

How can I get the picture to show in Photoshop? The thumbnail image appears in the right side panel but the full image isn't showing at all.

How can I get the picture to show in Photoshop CS3? The thumbnail image appears in the right side panel but the full image isn't showing at all.

What specific information would you need? The program was working just fine early yesterday morning and than when I came back in the afternoon to edit some more pictures that is when I wasn't able to see the full image anymore. It is providing me with all of the editing options as if the picture is there but it is just a blank screen with the thumbnail pic showing in the right panel.

The apps I created from "add to homescreen" have turned white and have a few lines and circles in it. How can I get the picture back on them?

The apps I created from "add to homescreen" have turned white and have a few lines and circles in it. How can I get the picture back on them?

Those aren't apps; they're bookmarks to websites. Have you tried resetting your device by pressing and holding the Home button and power button until the silver apple appears? If all else fails, you can just re-do the shortcuts.

Can't get the picture to show up on Apple TV using both of my iPads. Only sound. Everything is updated and rebooted. What's the deal ?

Can't get the picture to show up on Apple TV using both of my iPads. Only sound. Everything is updated and rebooted. What's the deal ?
there is no mirror button, nor is one hidden underneath anywhere.

Not all apps are enabled for airplay, this is up to the developer to do. If you want to mirror, it cannot be turned on within an app. You need to bring up control centre, select airplay and toggle ON mirroring.
iOS: Use AirPlay Mirroring - Apple Support

Got a new iPhone that I've been using for about a month now, so the question is how can I get the pictures from my old iPhone and keep the pictures I have on the new iPhone?

Got a new iPhone that I've been using for about a month now, so the question is how can I get the pictures from my old iPhone and keep the pictures I have on the new iPhone?

Connect old iPhone to computer and save the pictures on computer.
Connect new iPhone and sync the pictures to your new iPhone.

Updating my iphone just failed, right at the end. Now I can't get the picture showing me to plug in my iphone to itunes to disappear.

updating my iphone just failed, right at the end. Now I can't get the picture showing me to plug in my iphone to itunes to disappear. Please help, as I can't use my phone, and it will not clear.

read
http://support.apple.com/kb/ht1808

Terminal how can i get the picture dimension of a file?

Is it possible to get the dimension of an picture (120 x 120 px) via terminal command? The information is visible under the finder "getinfo" command for picture files. Can anyone help?

You can get image pixel size info using the ImageMagick utilities, which is a GNU package available for installation via the fink pacakage manager, then you can use the terminal command:
identify image.gif
ImageMagick also has several other useful conversion and image processing utilities.
http://www.finkproject.org/
http://www.imagemagick.org/script/index.php
Good luck.
P.S. - There may be ways to interact with AppleScript from Terminal to get the Finder info from a file, but I don't know how to do that.

Can't get the Kodak 5100 printer to work with air port

Any one know how to get the Kodak 5100 to work from air port on this Time Capsule. I have tried all the other things I have read but this thing will not print. I run a network diagnostics and it tells me server failed. And the way I feel Apple can take the Time Capsule back, so many problems took two days to get it up and running. Did Apple make this peice of junk.

i couldn't be happier with my TC, really.
+I have tried all the other things I have read but this thing will not print+
well, what have you tried?
did you delete your printer from the printer list (- sign), and re-add it (+ sign)?
+so many problems took two days to get it up and running+
was the user error, or TC's fault? you got it working, so it doesn't sound like it was TC.

My husband bought a new ipad and he created a new apple id and new password etc, now he wants to have all his pictures from his old Ipad that it was created on a different ID or Icloud id. How can i get the pictures?

My husband bought a new Ipad Mini and he created a new Apple ID and new password for him, but his old Ipad was under my Apple ID and Icloud too. Now he wants to get his pictures from Icloud to his new Ipad, What do i need to do?

You can use a wireless flash drive.
Copy from old iPad > wireless flash drive > copy to new iPad
http://www.sandisk.sg/products/wireless/flash-drive/

Since downloading Firefox, my photo's have disappeared and replaced by numbers - How can I get the pictures back

I was having trouble with downloads on Ebay using Internet Explorer. They recommended Firefox. And it worked better. However, under My Pictures, the actual pictures disappeared and were replaced with the numbers only. I makes it difficult to remember which picture is which when you wish to download 50 or more items. I would like to have the actual pictures back rather than just the numbers. In fact, I do not have the pictures appearing that I use for Ebay. Thank you.

If images are missing then check that you aren't blocking images from some domains.
*Press the F10 key or tap the Alt key to bring up the hidden "Menu Bar" temporarily.
*Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
*Check "Tools > Page Info > Media" for blocked images
*Select the first image link and use the cursor Down key to scroll through the list.
*If an image in the list is grayed and "<i>Block Images from...</i>" has a check-mark then remove this check-mark to unblock images from this domain.
Make sure that you do not block (third-party) images, the permissions.default.image pref on the <b>about:config</b> page should be 1.
Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
Make sure that you allow pages to choose their own colors.
*Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
Note that these settings affect background images.
See also:
*http://kb.mozillazine.org/Website_colors_are_wrong
There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
See also:
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*http://kb.mozillazine.org/Websites_look_wrong

I took a photo using burst mode on my 5S and can't get the picture off my phone

I took a photo using burst mode on my iPhone 5S. The "burst" consists of 4 photos, originally. I have picked my favorite and deleted the others. Still, I am unable to get that photo off of my phone using Photo Stream, or e-mail.
Normally, my photos end up in Photo Stream and I can access them from my computer, but this photo that used to be part of a burst, and even while it WAS a burst, doesn't appear in my Photo Stream nor can I email it to myself. I was able to eventually SMS the photo to a colleague who then emailed it back to me, so now it's on my computer but why can't I get that image off of my iPhone using my usual and straight-forward methods??
I was able to pull it off using iPhoto so that works. My burst only had 4 photos but like I said, I picked my favorite and deleted the rest and I could never e-mail it to myself or access it on my computer using Photo Stream.
Thanks.

This happens every single time a new camera comes out from one of the two big camera makers. Nikon and Canon do not send preproduction units to Adobe, so Adobe has to go out and buy a D750 or whatever from the store to test and profile it before they can update Lightroom. They can't get one earlier than you and I can. The profiling is quite an extensive operation. Other camera makers do send preproduction units, use dng, or do the profiling in-house and there you often get support right from release. If camera makers would finally embrace an open raw format such as dng, this whole problem would be gone but both Canon and Nikon seem to think they live in an upside-down world where their clients only use their software.
Usually the dead period only lasts a few weeks but it is frustrating nevertheless. My only advice is to not buy a new camera at the day of release and expect to have third parties to support it. You definitely should not be buying these cameras right away if your business depends on it. Aperture, Capture One, etc. have the exact same problem. No third party (read non-Nikon in this case) will support the camera from the release date. Some are quicker than other adding support. Adobe is somewhere in the middle of the pack in this respect. Nobody outside of Adobe knows when an update comes out. Could be tomorrow, could be a few more weeks or a month. They might jump straight to Lightroom 6 and never add direct support to LR 5. Sometimes they will first bring out a beta version of dng converter that will convert the new camera's nef files to dng, which will work fine in the current Lightroom before updating Lightroom itself.

I can't get the HP Smart Print to work on my computer. No Smart Print icon in command bar.

HP Pavilion Slimline s3530f
Windows Vista 64-bit
IE 9

Hi jackie1b,
Thank you for your reply,
I see you do not wish to purchase the adapter online and are having difficulty locating one locally. I Googled DVI adapter at Staples.com and they carry the cables. You can try any computer shop or office depot, staples any place like that, they usually carry the accessories, if not if you spoke with a sales person, they would most likely order it for you. They would also be able to assist you with getting the correct cable for your situation. They also produce cables with different connection on either end, you could also check into.
Here are two document that I hope will be of assistance to you. No Sound from the Speakers or Headphones (Windows 7) and Connecting Monitors and TVs to Your PC (Windows 7).
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Why i can't get the hashtable value printed?

hello all
i have simple hashtable i can get the keys but i cant get the values
why?
<%
String event = request.getParameter("eventFrom") ;
event = (event != null ? event : "");
if(event.equalsIgnoreCase("result")){
java.util.Hashtable myHashtbl = new java.util.Hashtable(request.getParameterMap());
if(!myHashtbl.isEmpty()){
Enumeration keysEnum = myHashtbl.keys();
while(keysEnum.hasMoreElements()){
String keyName = (String)keysEnum.nextElement();
String keyValue = (String)myHashtbl.get(keyName.toString());
out.println("KeyName: "+keyName+"<br>");
out.println("ValueName: "+keyValue+"<br>");
}else{
%>
<html>
<body>
<form name="test" id="test" action="<%= request.getRequestURI() %>" method="get" >
<input type="hidden" name="eventFrom" value="result" >
<input type="hidden" name="<%="this_is_key_1" %>" value="<%= "4444444" %>" />
<input type="hidden" name="<%="this_is_key_2" %>" value="<%= "2424"%>" />
<input type="submit" name="okButton" id="okButton" class="button" style="width:80px;" value="Submit" />
</form>
</body>
</html>

The object returned is a Map because that is exactly what it is - a mapping of request parameter to their values.
Take a look at the API for [url = http://java.sun.com/j2ee/1.4/docs/api/javax/servlet/ServletRequest.html]Servlet Request
You will see that getParameterMap() returns a Map
The keys in this map are of type String
The values in this map are of type String[] (ie an array of Strings)
The reason it is an array is that you can send multiple parameters with the same name in the request eg test.jsp?a=1&a=2&b=3 and have two values for "a"
Things I think are wrong in this code
1 - you are casting it to Hashtable. Ok, it might work, but it is not guarunteed. The API says it returns a Map, so you should use a Map.
2 - you are casting the value to a String, when it is String[]. That would be a runtime ClassCastException
Here is my version of what I think it should be in scriptlet code
<%@ page import="java.util.*" %>
<%
Map parameterMap = request.getParameterMap();
for(Iterator it = parameterMap.entrySet().iterator(); it.hasNext(); ){
Map.Entry entry = (Map.Entry)it.next();
String keyName = (String)entry.getKey();
String[] values = (String[])entry.getValue();
out.println("KeyName: "+keyName+"<br>");
out.println("Value: "+Arrays.asList(values) +"<br>");
%>And because I like to promote use of JSTL, heres a JSTL version:
<%@ taglib prefix="c" uri="http://java.sun.com/jsp/jstl/core"%>
Parameters:
<table>
<c:forEach var="p" items="${paramValues}">
<tr><td><c:out value="${p.key}"/></td>
<td>
    <c:forEach var="val" items="${p.value}" varStatus="status">
      <c:out value="${val}"/>
      <c:if test="${not status.last}">,</c:if>
    </c:forEach>
</td></tr>
</c:forEach>
</table>Cheers,
evnafets

I can't get the picture on TV, I have the sound any ideas?

I have an apple dock with the Av kit.
I've read other replies on here and I've tried those solutions. The video is set to TV. I'm in the UK so we're PAL here but either PAL or NTSC don't work.
I have the picture and the sound on the ipod and only sound on the TV.
Also the sound level is very low even with ipod on full volume and TV up high it's quiet.
Any ideas would be greatly appreciated. Thanks
G5 Dual Mac OS X (10.4.8)

I have an apple dock with the Av kit.
I've read other replies on here and I've tried those
solutions. The video is set to TV. I'm in the UK so
we're PAL here but either PAL or NTSC don't work.
I have the picture and the sound on the ipod and only
sound on the TV.
Also the sound level is very low even with ipod on
full volume and TV up high it's quiet.
Any ideas would be greatly appreciated.
Thanks
I'm having the same problem exactly. I've tried three different cables, and tried connecting them to the "wrong" plugs too. Nothing gets me video. I've selected Video "out", and chose the "AV" input of my TV. Nothing but very faint sound. And the picture continues to show on the iPod.
Have you solved the problem yet?
Jay

How can i get the pictures out of my ipod

Im giving my old ipod to my niece but it still has pictures on it that I dont want to lose. how can retrieve the pictures from the ipod before resetting it? its an ipod nano 3rd gen.

computers do sometimes recognise iPods as cameras when there are saved photos on them.
as iDeer says, saved photos (unlike synced photos) can be deleted on the iPod. just go into the saved photos folder, go to the photo you wish to delete, select it, then click the bin logo in the bottom right hand corner.
when you have saved photos on your iPod, this is the only time when it will act as if it has a 'disk mode'. you will be able to access them as you would access any other form of disk/usb stick (again, like iDeer, I don't have a Mac, so I'm not sure of the exact procedure). you can delete the photos by navigating to it like this.
i'm not sure how iPhoto works either, but can't you delete the photos in there? i've also read somewhere on here that you can switch off the setting for iPhoto to open when you plug in a 'camera'. again, i'm not sure where you'd find that setting, but i think it is there.

I can't get the pictures to print in aliagment

Similar Messages

Maybe you are looking for