I can't get the profile manager to start in windows 7.

I am running Firefox v5.0.1 in Windows 7 Ultimate with Service Pack 1 installed. I have followed the steps on Firefox help page to start the Profile Manager and cannot get it started.
I have entered both "firefox.exe -ProfileManager" and ""C:\Program Files\Mozilla Firefox\firefox.exe" -ProfileManager" in the Search box at the bottom left of the Windows Start menu and have gotten no response from the computer both times.

Yes, the search field does work in Notes.
You can also use search your entire iPhone (including Notes) for something - this can be very useful
- in any normal apps page put your finger on the screen around the middle of the screen and swipe downwards
- you can then enter something to search for in your entire iPhone
Try resetting your iPhone to get Notes search back,
Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

Similar Messages

  • Firefox will no longer open and I can not get the profile manager to open either. What do I do?

    I tried to open firefox this morning, and it would not open. I tried to uninstall and reinstall several times and even deleted all of my information. I looked it up on your site, and it said to open the profile manager. I followed the directions on how to open it, and it too will not open. I tried several times to open it as well. I need help. I only use firefox and have for years, and I have never had this problem. What do I do?

    A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    Try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

  • HT5219 How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    How can i get the Apple Thunderolt display to show Windows 7 i run on my system using Paralells desktop..

    You may need to set the slider at the upper-right corner of the Control window to something other than the extreme left-most position:
    Hope this helps.

  • Can I get the URL of any other browser window in java

    Can I get the URL of any other browser window in java

    Hi, did you find the way to find the URL of the WSDL? I have the same problem.

  • Firefox won't launch and I can't get into Profile manager to make a new profile.

    Whenever I try to launch Firefox it doesn't open. i've had this problem before and I fixed it using the profile manager, I'm trying to do the same thing this time. However the Profile Manager won't open at all.

    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating
    See also:
    *http://kb.mozillazine.org/Browser_will_not_start_up
    You can use one of these to start Firefox in <u>Safe Mode</u>:
    *On Windows, hold down the Shift key while starting Firefox with a double-click on the Firefox desktop shortcut
    *On Mac, hold down the Options key while starting Firefox
    *Help > Restart with Add-ons Disabled
    *https://support.mozilla.org/kb/Safe+Mode

  • Can I use the Profile Manager as an MDM while distributing app through app store?

    Is it possible to use the Profile Manager within the OSX Server to provision profiles through apps purchased in the app store? 
    Ex:  userX buys app in the app store, in downloading the app they get enrolled in the MDM / OSX Server I control.  They select profile settings within my app and submit to OSX Server (Profile Manager) at which point I send back OTA the provisioned profile for them to upload.
    Ex:  https://itunes.apple.com/us/app/parentkit/id600618138?mt=8
    Thanks for the feedback!

    Is this not possible?  Is it possible but not allowed? 

  • Neither Firefox nor the profile manager will start. In my task manager, the process is using 50% of my cpu but does nothing. I love browsing with firefox, how can I fix this?

    I've tried restarting my computer, the I tried uninstalling and reinstalling, then uninstalling, erasing all firefox files and folders, then restarting and reinstalling. I've also tried opening the profile manager to change my profile. After reinstalling a few times and trying to open the profile manager before launching firef0x, I got the firefox has crashed window and the process in the task manager is still using 50% of my cpu. The most recent expunge then re-download pops up a "file is corrupt" error and won't even install the program.

    Kill those processes that you are seeing, including any plugincontainer.exe, only once firefox has stopped running should you try to update it.
    Totally unexpected instances of firefox running may sometimes be the result of malware activity.

  • When I plug in my ipod Nano i syncs to itunes but I can't get the music from my Library in Windows Media Player???

    How can I get my music from my Library in Windows Media Player to sync to my iPod Nana?

    You can't sync an iPod using Windows Media Player.  You need to add the songs to your iTunes library first, and then sync those songs to the iPod.
    This document provides more information (Add to Library section)
    http://support.apple.com/kb/HT1347
    NOTE:  The WMA files (the file type used by Window Media Player) need to be unprotected (no DRM).  They are converted to a format supported by iTunes while adding to the iTunes library.  This WMA conversion feature only works in the Windows version of iTunes (Mac users cannot do it).
    I believe you can drag and drop the WMA files, or the folder containing the WMA files, onto the iTunes window.  The original WMA files are not changed.  iTunes creates its own converted files at the location it stores all the iTunes media files.

  • Your firefox profile cannot be loaded. It may be missing or inaccessible. Firefox will not open and I don't have another internet program on my computer. How can I get the profile back?

    Everytime I try to open firefox on my desktop it says "Your Firefox profile cannot be loaded. It may be missing or inaccessible." So now I cannot open firefox at all and I can't figure out how to get a profile. I just had to delete some programs to gain memory on my system and that is when the problem started. I don't have another internet program

    Hi crmn,
    Have you looked at the Knowledge Base article [[Recovering important data from an old profile]]? There are steps in there that might help you. You might just want to create a new profile and start fresh.
    Hopefully this helps!

  • Firefox suddenly won't start and I can't open the profile manager; what else should I do?

    Firefox was working. When I went to re-open it the wheel spun, stopped, and then nothing. I search online and it said to create a new profile by running firefox.exe -p. But nothing happened. The support article said that perhaps another version of Firefox was running in the background but not visible and to reboot. I did. No difference. I'm stuck. What else can I do?

    I tried Safe Mode, but apparently you need Firefox to start regularly and then hit the menu button to get it to start in Safe Mode next time. Unfortunately I cannot get Firefox to start at all.
    I'm going to try to save the profile and then re-install Firefox. However, the "Back up and restore" instructions on how to do this are a bit vague. For example, it tells you how to find your profile file by doing a search. But on my computer the search comes up empty (turns out on my computer the file name has the word "local" in the middle of the phrase given in the instructions.

  • Where can I find the profile Manager

    I am trying to import my profile to a new computer and I understand I can do that by creating a new profile and copying my files into it.
    Trouble is - I don't know how to do that !
    regards

    See Profile Manager:
    *http://kb.mozillazine.org/Profile_Manager
    *https://support.mozilla.com/kb/Managing+profiles

  • I need help in creating Firefox profiles directly from command line (script like) without having to use the profile manager step-by-step window

    is there a way to provide command line arguments when invoking profile manager so that I can seamlessly create a profile from one invocation? Passing profile name and profile location. I have to bypass user interaction with profile manager window. Thanks.

    http://developer.mozilla.org/en/docs/Command_Line_Options#User_Profile

  • HT2589 We had an account that was housed on our old computer but it didn't make it onto the new one...how can I get the account balance and start using it?

    We had an account that was housed on our old computer but it didn't make it to the  new one.  How can we find the balance and start using it again?

    iTunes accounts are not located on your computer.  They are simply tied to a specific AppleID.  Just log in to iTunes with the correct AppleID and Password and you will be back in that account.

  • I can't get the update download to start?

    why  wont the flash player update start on my Mac Book Air?

    Please refer : http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-mac.html

  • Where can I get the pacman manager thats in Archbang? [solved]

    In ArchBang when I used the 'pacman' command it had a little yellow pacman eating the pellets as the file downloaded. Anyways, I actually think thats cool so I'm wondering how I can get it.
    Last edited by carebearboy (2011-07-25 13:07:51)

    # /etc/pacman.conf
    # See the pacman.conf(5) manpage for option and repository directives
    # GENERAL OPTIONS
    [options]
    # The following paths are commented out with their default values listed.
    # If you wish to use different paths, uncomment and update the paths.
    #RootDir = /
    #DBPath = /var/lib/pacman/
    #CacheDir = /var/cache/pacman/pkg/
    #LogFile = /var/log/pacman.log
    HoldPkg = pacman glibc
    # If upgrades are available for these packages they will be asked for first
    SyncFirst = pacman-color
    XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
    #XferCommand = /usr/bin/curl -C - -f %u > %o
    #CleanMethod = KeepInstalled
    Architecture = auto
    # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
    #IgnorePkg =
    #IgnoreGroup =
    #NoUpgrade =
    #NoExtract =
    #Misc options (all disabled by default)
    #UseSyslog
    #ShowSize
    UseDelta
    #TotalDownload
    #CheckSpace
    #Shows pacman eating dots!
    ILoveCandy
    # REPOSITORIES
    # - can be defined here or included from another file
    # - pacman will search repositories in the order defined here
    # - local/custom mirrors can be added here or in separate files
    # - repositories listed first will take precedence when packages
    # have identical names, regardless of version number
    # - URLs will have $repo replaced by the name of the current repo
    # - URLs will have $arch replaced by the name of the architecture
    # Repository entries are of the format:
    # [repo-name]
    # Server = ServerName
    # Include = IncludePath
    # The header [repo-name] is crucial - it must be present and
    # uncommented to enable the repo.
    # The testing repositories are disabled by default. To enable, uncomment the
    # repo name header and Include lines. You can add preferred servers immediately
    # after the header, and they will be used before the default mirrors.
    #[testing]
    #Include = /etc/pacman.d/mirrorlist
    [core]
    Include = /etc/pacman.d/mirrorlist
    [extra]
    Include = /etc/pacman.d/mirrorlist
    #[community-testing]
    #Include = /etc/pacman.d/mirrorlist
    [community]
    Include = /etc/pacman.d/mirrorlist
    # If you want to run 32 bit applications on your x86_64 system,
    # enable the multilib repositories as required here.
    #[multilib-testing]
    #Include = /etc/pacman.d/mirrorlist
    #[multilib]
    #Include = /etc/pacman.d/mirrorlist
    # An example of a custom package repository. See the pacman manpage for
    # tips on creating your own repositories.
    #[Xyne-Any]
    #Include = http://xyne.archlinux.ca/repos/xyne-any

Maybe you are looking for

  • How to clear GR/IR account when criteria is not matching

    Hi All, I have issue in clearing GR/IR account done by F.13.  Criteria field XREF3 in Criteria 3 given is not matching in WE and RE, so I cannot clear, this happend to once particular GR/IR only. So how to clear this GR/IR when Criteria is not matchi

  • Virtual infoprovider with services - Navigational attributes

    Hi all, I have a basic cube in BI system- X , and created a virtual cube in another BI system Y with services to read data from basic cube of BI system X . In BI system Y we built a report on virtual cube. This report (on virtual cube in BI system Y)

  • Subpanel doesn't work in Runtime application

    I created an application that uses a Subpanel. The Subpanel works correctly when I am running the code in LabVIEW, but nothing shows up when I use the runtime application. Are subpanels handled differently by the runtime engine than they are in the F

  • How can I copy the channels to a new group, so they would have the same length (in time)?

    Hi, I have several groups with channels of different lengths (time t). I want to make a new group containing the required channels. I did this in Diadem 2012 test version with Call Data.Root and it works. Now I am trying to do this in Diadem 10, but

  • Display select in a stored procedure

    Hello, I have a select statement that I wanna print in a stored procedure. The only way is to create a cursor in the SP, which holds the result of the select, and then iterate through the lines and print each line using dbms_output.put_line? Thanks.