I can't get the reset homepage procedure to work on Firefox 26; Help!

I followed directions EXACTLY on how to set a new homepage... hasn't worked and I've checked and rechecked that I'm doing it right. I type in the url for the page I want and when it loads, I click on the icon at the immediate LEFT of the nav bar and drag it all the way to the right and drop it on the homepage icon, but nothing happens. So what am I doing wrong? This is a desktop pc with Intel CPU and Windows XP with all 3 service packs. I hope all this works because I'm about ready to ditch FF26 and go back to IE8!

Make sure that the Yahoo toolbar isn't causing this issue.
If you do not keep changes after a restart or otherwise have problems with preferences, see:
*http://kb.mozillazine.org/Preferences_not_saved
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do NOT click the Reset button on the Safe Mode start window.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Note that you have the GreatArcadeHits Add-on 1.0.0 extension, considered as malware, installed.
*http://kb.mozillazine.org/Uninstalling_add-ons
*http://kb.mozillazine.org/Uninstalling_toolbars

Similar Messages

HT5812 I can't get the fades or crossfades to work in LP X. Help, please?

I don't know what I'm doing wrong and I can't find it anywhere online. I have about 4 takes of drums recorded. No fades work at all. The fade icon in the pdf manual is different than the one I have, which looks like this: >
I have used pro tools and its cake compared to this. I've searched tutorials and they just click on the fade tool and fade a track just like in pro tools. But for some reason mine doesn't even do that. Any suggestions? I also see no option to "Flatten stack". Not sure if the two are related.
Joshua

Hi
You cannot apply fades to Take Folders. Within a Comp, crossfades are automatically applied according to Preferences:Audio:General.
Flattening a Track Stack is not the same thing as flattening a Take Folder. To do the latter, click on the Take/Comp menu top left of the Take folder
CCT

I can not get the download for indesign to work

I can not get the download for indesign to work.

Perhaps this Adobe Help document may help you:
http://helpx.adobe.com/creative-suite/kb/download-install-trials.html?t2

Answer: to How can I get the reset button to work.

How can I get the reset button to work?: Answer
Thanks to everyone who helped on this. You are awesome. Especially Ned!! Posted here because I was unable to add more to the existing post.
Here is the question:
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
ArgumentError: Error #2025: The supplied DisplayObject must be a child of the caller.
    at flash.display::DisplayObjectContainer/removeChild()
    at AddATree2/onReset()
When you click on the reset button, this error below comes up. If you can't find the button it is the navy colored rectangular thing in the lower left corner of page.
Here is the answer:
//when you click the reset button everything is removed from the stage
    //except the star, baclground, and reset button (trees and greeting REMOVED)
    public function onClear(Event:MouseEvent):void
            if (tree3) removeChild(tree3);
            if (tree2) removeChild(tree2);
            if (webText) removeChild(webText);
            if (tree) removeChild(tree);
            clickCount = 0;

This is the answer to what to put in the onclear function.

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp

I have Adobe Photoshop Elements 10. It came installed on my HP Desktop. I am can not get the warp text tool to work. It has worked in the past. Once I click warp text, the little window does not pop up, and if I try to do anything else after I click warp text, it wont let me. Just sounds the ding, alert, can still slightly navigate the program but can not use any other tools after clicking warp text. I just have to open task manager and close the program. not sure if I'm doing something wrong or maybe I just need to uninstall and re install. Having trouble finding out how to uninstall and reinstall because the program came pre installed on my desktop.

It actually sounds like the warp text window is opening off screen.
Resetting the photoshop elements 10 preferences should fix it.
*Press and hold the Shift+Ctrl+Alt keys just after you start the launch of the photoshop elements 10 editor
*Keep holding the keys down until you get a dialog asking if you want to delete the adobe photoshop elements setting file
*Press Yes

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

My aperture library will not open after restoring my whole computer after a kernal panic. I can not get the Aperture troubleshooting menu to open...any help?

Leonie,
Fisrt let me thank you for your reply and assistance! So here is the problem with so more detail...I was not sure I was going to get any replies ; )
I restored from a time machine back up.
History of Failure:
I was trying to launch Aperture when the kernal panic occured. My computer had been closed, and asleep and the battery was dead. I plugged in charger and it was restoring/waking up after being asleep/shutting down from dead battery. I launched Aperture from the dock and as soon as it opened the kernal panic occured. After that the computer would not turn on. It would try to boot then it would shut off. I even tried to safe boot to no avail. I went to the Apple store and they told me that the only thing I could do was restore whole computer from back up. So thats what I did.
Since then my previous aperture library: "2011" will not open. I have created a new aperture library "2012", and it runs fine. I have added new photos for about the past month...no problems.
When I launch aperture with 2012 library then try to switch libraries, I get the following prompt: "The selected library is from an older version of Aperture and requires a relaunch to switch." I choose "Relaunch" and I get the following warning prompt: "There was an error opening the database for the library “~/Pictures/Aperture Library 20111.aplibrary”." The only option is "Quit"
Both libraries are version 3.2.3
Computer stats: 3.06 GHz Core 2 Duo, 8 GB 1067 MHz DDR3 RAM, OS X 10.6.8
I have tried to launch aperture troubleshooting by holding option+command from both the aperture icon and from the library file, neither will launch the troubleshooting feature.
I am ok with computers, but not a whiz (mechanical engineer)...to me it seems as though there is a corrupt path or file or some sort of "check" that is failing, becuase the failure occurs so fast after trying to launch aperture. Maybe that doesn't make any sense but just a thought.
I hope that you may be able to provide some insight. Thank you again for you time and I hope that you have a nice day!
Mike

HT3552 I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for your help.

I am billed 3 times for a same item. How can I get the problem fixed? Thanks a lot for yur help. nhuttan448

Go here:
http://www.apple.com/support/itunes/contact/
and follow the instructions to report the issue to the iTunes Store.
Regards.

I can't get the patch select buttons to work in edit mode.

I can't get the patch select buttons to work in edit mode. When I select any template, the set buttons or the patch buttons don't work at all. My up and down arrows work fine but I need the on screen buttons to be assigned to my footswitch.

In edit mode, at concert level, select the pedal. Then in the screen control inspector, in the mappings tab, select actions>next patch.

TS4268 I can't get the iMessage or FaceTime to work on my iPod touch. I updated to the latest iOS. I have ensured restrictions are off and 'Set Automatically' is selected under date & time settings. I can enter my apple ID, but it bounces back to the l

I can't get the iMessage or FaceTime to work on my iPod touch. I updated to the latest iOS. I have ensured restrictions are off and 'Set Automatically' is selected under date & time settings. I can enter my apple ID, but it bounces back to the first login screen.

I just hit the home key very fast 3 times and it worked. Glad to see that someone suggested this to another person with a mini. My gremlins are all gone. Yea to the forum .......Marci 73361

I can't get the yahoo messenger app to work on my phone, all it does is show is "connecting" and I appear on-line to my contacts.

I can not get the yahoo messenger app to work on my iphone.

Same problem here!
I'm using the latest in Chrome, Firefox, and IE 8, regular and compatibility mode. This is extremely frustrating, one of the primary reasons I bought this printer was for the mobile/eprint functions.

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

I can't get the Siri dictation tool to work when I access the Internet via Wi-Fi at work. It will work if I access the Internet with a cellular connection. What can I do to get it to work on the Wi-Fi?

Thanks for your note. My tech dept could not come up with any explanation for the dictation tool not working. We have about 1,000 employees in our office - I think I will send an all employee message to see if anyone else has the issue.

HT4061 HOW CAN I GET THE CODE TO MAKE IT WORK IN EGYPT

HOW CAN I GET THE CODE TO MAKE IT WORK IN EGYPT
this is my details serial: DN*******8GH
IMEI : ****
MEID : ****
MODE : MD656LL
<Edited By Host>

If your phone is not unlocked you need to contact the carrier it's locked to.

I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the firefox homepage to come up. How can I get the Yahoo homepage off and get the firefox homepage on?

I upgraded my Yahoo IM and after it uploaded, my homepage went from Firefox to the Yahoo homepage and I cannot get the Firefox homepage to come up. I have tried to reinstall Firefox, but the Yahoo homepage still comes up. How can I get the yahoo page off and get the Firefox page back on?

Here are instructions to [[How to set the home page#w_restore-the-default-home-page|restore the default home page]].

HT4352 i set my apple up prior to setting up the itunes. I now can't get the apple tv remote to work any suggestions

I am having issues setting up my appletv. I made the error of setting it up without having itunes on my computer. I can't get the remote to work, the light isn't on the box, and I can't get it to reset to factory default. I don't have a "-" key on my remote. I held the menu button down with every button on the remote without success.
Please help!!

Your Apple TV may have become paired with another remote. Hold the remote close to and pointed at the Apple TV, hold down the menu and Rewind buttons together for 6 seconds or until you see a broken chain icon on screen.

How can i get the Adobe plug in to work with Visio 2013?

I purchased Adobe Acrobat x Pro recently and installed it, I have compatibility issues visio 2013. The adobe pdf converter plug in stays inactive despite all my efforts to activate it, I need help with this? How can i get the plug in to work with Visio 2013?

Should have purchased XI. According to Compatible web browsers and PDFMaker applications you will need Acrobat 11.0.1 -and- to be running the 32-bit Visio.

I can't get the reset homepage procedure to work on Firefox 26; Help!

Similar Messages

Maybe you are looking for