I can't get the settings page to load properly

I type the I.P. in and it only loads a few items. What is the deal?

To view the router's web pages:
Use Internet Explorer, it usually works.
JavaScript must be enabled.
Use a computer that is wired to the router.
In the non-working computer, temporarily turn off your software firewall.
If you are using Zone Alarm, right click on the ZA icon in the system tray (lower right corner of screen) and then click "Shutdown ZoneAlarm", and see if this fixes your problem. If this does not work, try the following with Zone Alarm: Open the ZAISS control center, go to Privacy, then temporarily turn off Ad Blocking and Cookie Control, and see if that fixes your problem.
If you are using Noton Internet Security with the Add-on Pack, be sure to turn off the Pop-up Blocker. Some users have reported that they needed to uninstall the entire Norton Add-on Pack.
If you cannot get anything at 192.168.1.1 then perhaps this is not your router's address. Go to "Start" > All Programs > Accessories > Command Prompt.
A black DOS box will appear. Type in "ipconfig" (with no quotes), then hit the Enter key. Look at the "Default Gateway". Is it 192.168.1.1 ? Point your browser to the "Default Gateway", then login to your router.
If the above fails, disconnect your modem from the router, and try again. If this corrects your problem, then most likely you have a "modem-router" rather than an ordinary modem. Check to see if your "modem-router" is using the same 192.168.1.x address space as your Linksys router. If it is, then report back with this problem, and also state the make and model of your modem-router.
If all of the above fails, power down your entire system, unplug it from the wall, wait one minute, then power up and try again.

Similar Messages

  • TS1398 I can't get the authentication page to load to input a username for wifi network

    I can't get the authorization page to upload so I can enter wifi network username & password

    Whenever I log into icloud.com
    Using what version of which browser?
    iCloud.com requires Safari 6 or later, Firefox 22 or later, or Google Chrome 28 or later. Have you tried all of those?
    If you have, have you tried clearing your browser cache and cookies?
    For the first tine since 1989 I'm thinking about buying a PC.
    You'd have exactly the same problems on an 8 year old PC too. It's a bit unreasonable to expect such an old Mac to continue to be compatible as software is constantly updated.
    Saying that, I'm still able to access iCloud.com successfully in Safari v5.0.6 on a PowerPC Mac running Mac OS X 10.5.8, so the problem you're having is likely to be a browser issue, not something inherently wrong with the computer.
    Since all this crap started, Mail won't download my Mac.com or me.com email.
    The iCloud.com website is totally unconnected to Mail's ability to download email via IMAP. Have you checked the mail server settings are correctly setup and up-to-date?

  • On My Wife's iPad 4, when she enters a note it is automatically copied to her Gmail email account.  I can't get the settings right to do the same thing on my new iPad Air.  Any suggestions?

    On My Wife's iPad 4, when she enters a note it is automatically copied to her Gmail email account.  I can't get the settings right to do the same thing on my new iPad Air. 
    Any suggestions?

    Go into Settings>Mail,Contacts, Calenders then you need to click on your email and make sure you have the thing next to the word notes switch on.
    Then they should sync over the iCloud
    Hope this helps!

  • When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it, fix?

    When I start mozilla or open any link in a new window I get the desired page to load but an additional new tab page opens up along with it. I've tried switching my homepage to different things (new tab, firefox home, show blank page) but I always get an additional new tab to open. How do I get only a single page to open?

    Hello,
    The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
    '''Note''': ''This will cause you to lose any Extensions and some Preferences.''
    *Open websites will not be saved in Firefox versions lower than 25.
    To Reset Firefox do the following:
    '''For Firefox versions previous to 29.0:'''
    #Go to Firefox > Help > Troubleshooting Information.
    #Click the "Reset Firefox"[[Image:Button reset]] button.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    '''For Firefox 29.0 and above:'''
    #Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    #At the top right corner of the page, you should see a button that says "Reset Firefox"[[Image:Button reset]]. Click on it.
    #Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
    #Firefox will open with all factory defaults applied.
    Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
    Did this fix your problems? Please report back to us!
    Thank you.

  • I have Windows 7 and PS Elements 10 and can't get the text button to work properly.  What can I do?

    I have Windows 7 and PS Elements 10 and can't get the text button to work properly.  What can I do?

    Try selecting the T tool and then doing a reset (see image below)

  • I am using windows 7 and can't get the print drives to load for F2210 printer

    I am using windows 7 and can't get the print drives to load for F2210 printer and I keep receiving different fatal error codes.

    Hello @Imvertical 
    Welcome to the forums!
    I read about how you're attempting to install your Deskjet F2210 on your Windows 7 system and receive Fatal Error codes. I will do my best to help and make some suggestions for you to try. 
    To being, try a standard copy from the unit to see if it will copy. If copies work, continue troubleshooting. If not, let me know what happened when you made a copy.
    Next:
    Perform a Level 3 uninstall.
    There are 2 ways you can run the uninstall:
    From Original installation CD:
    1. Insert CD into drive, and then cancel the installer
    2. Click Start and open 'Computer', and then right click on the CD drive and open
    3. Open folder Util
    4. Open folder CCC
    5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
    10. Run the download to reinstall the printer
    If software was downloaded and extracted to your system:
    1. Click Start and type %temp% in the run field
    2. Look for, and open the folder starting with 7z (Example: 7zS2356) (If there is more than one, choose the most recent folder)
    3. Open folder Util
    4. Open folder CCC
    5. If you have an HP computer run the L3uninstall.exe. If you have a non-HP computer run the L4uninstall.exe
    6. When the uninstall has completed restart the computer
    7. Run Disk cleanup from Accessories\ System Tools
    8. Download and install the latest version of Adobe flash player
    http://www.adobe.com/support/flashplayer/downloads.html
    9. Download the full feature software and drivers: HP Deskjet F2200/F2224 All-in-One Printer series Full Feature Software and Driver
    10. Run the download to reinstall the printer
    Please let me know if the installation worked after the Level 3 uninstall.
    Good luck and have a nice Wednesday!
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Every time I start Firefox, the upgrade/signup page is displayed in one tabe while google, my start;up page s displayed in another. How can I stop the firefox page from loading every time?

    Every time I start Firefox, the upgrade/signup page is displayed in one tab while google, my start-up page is displayed in another. How can I stop the firefox page from loading every time?

    See these articles for some suggestions:
    * https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
    * https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
    * http://kb.mozillazine.org/Preferences_not_saved

  • HT204053 Why can'T I get the store to work. I have tried the search and nothing happens. I want to buy more spongs and can only get the home page to show the music

    I have been trying to get an album of George Jones to load to my Ipad i can't get the store to let me search ? What am O doing wrong

    (for an example of what I mean, my site: http://www.katesilsby.com (retouch page) and what old iweb did and what I want to happen: http://web.mac.com/vogier/iWeb/vivian%20ogier/wardrobe.html
    iWeb2 photos page is completely different from that of iWeb1.
    iWeb2 photos page can be retro back to iWeb1, but not without major javascript coding.
    or using completely different previewing method for larger image, example: http://hdl.50webs.com/Lytebox/Photos.html

  • TS3899 hi have just got a iphone 4s when i go on settings i get this box saying turning on mail it does not go and i cant get the settings page thank you

    hi I have just got a iphone4s when I go on the settings page I get a box saying turning on mail which I cant get rid off so I cant acsess the settins page thank you

    Hi kevred51,
    Thanks for visiting Apple Support Communities.
    If the Settings app on your iPhone is not behaving correctly, first force close the application using this method:
    Double-click the Home button.
    Swipe left or right until you have located the app you wish to close.
    Swipe the app's preview up to close it.
    These steps come from this article:
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    If you are still not able to access Settings, restart your iPhone next:
    iOS: Turning off and on (restarting) and resetting
    http://support.apple.com/kb/ht1430
    Cheers,
    Jeremy

  • I Can't get the motion page to play at the beginning of the movie, it old shows up at the end of the movie, Help!!

    Does someone know how to get the motion page in I-dvd to play at the beginning of the movie instead of at the end, which is what is happening with my situation??

    Are you referring to the motion menu?  Check to see if you have the project set to autoplay when you insert the disk in a player.  That would bypass the menu and would drop you back into the menu at the end of the show.
    OT

  • HT201272 I purchased some music on my iPod touch and want to download them to my iPad mini also but I can't get the purchased section to load at all anyone else had this problem?

    Ok so I have an iPod touch 4th gen and I purchased some music on it. I also have an iPad mini and wanted to download it onto there also. Problem is that no matter how many times I try I can't get my purchased music section to load. I get the big at the top where you can select all or not on this iPad and the alphabet down the left hand side and the little loading thingy appears but nothing ever actually loads no matter how long I wait. It also sometimes just crashes the whole thing and kicks me out the app. Any suggestions? I've tried turning device on and off, it has the latest software iOS 7 and I've tried resetting all the settings already also as well as logging in and out of my Apple ID.

    Hello AstarteLydianna,
    The following article provides some additional troubleshooting steps that can help get the App Store working on your iPod Touch.
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Cheers,
    Allen

  • Why PhotoBooth can't get the background images to work properly on the picture

    Why PhotoBooth can get the background images to work properly on the picture, is it because too much luminosity in the environment or too little? I have tried everything and nothing works.
    <Re-Titled By Host>

    Might try this...
    Go to System Preferences > Universal Access and down in the Display: section make sure that the Enhance contrast: slider is all the way to left to Normal, or more to the right for less Contrast.
    Go to System Preferences > Accessibility in 10.8.x,and down in the Display: section make sure that the Enhance contrast: slider is all the way to left to Normal, or more to the right for less Contrast.

  • How do I get the newest page when loading a website? A website I looked at today is the same as it was earlier in the week, yet using my computer at work the same website has new information. How do I tweak my settings to download the newest page?

    When downloading a favorite website my computer at home is opening what seems to be the page saved previously, and not the newest version.

    Thank you for checking, Tom,
    I'm confused. What do YOU get when you push the feed button? And why is it working on yours and not either of my machines?
    Today, my Mac (w/Safari 4) gets the same error message: Safari can’t open the page Safari can’t open the page “feed:http://vibrationalvoyages/vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml”. The error is: “The feed could not be loaded because the content is not in a known feed format.”
    My little ASUS (with a Linux operating system) gets a screen that says "The requested URL was not found". The URL on that page is http://vibrationalvoyages./vibrationalvoyages.com/DivineLight_Vibrations_Principles_andApplications/rss.xml
    On both error messages, the URL I was checking was:
    http://www.vibrationalvoyages.com/DivineLight_Vibrations_Principles_and_Applications/Divine_Light_Vibrations_Principles_ andApplications.html
    The last URL was, of course, the URL generated by iWeb.
    So, my question still is:
    HOW CAN I GET MY FEEDS TO WORK PROPERLY? If the problem is there shouldn't be an http:// after feed: then, how do I get iWeb to set it up properly?
    Any ideas?
    GG

  • I am on dial up. Can I get the progress bar for loading a page back it helps me know how things are going.

    On previous versions of Firefox there was a progress bar when you were loading a page. It was in the lower right corner. How can I get it back? It would be very helpful if there was an add on for it for those of us still on dial up.

    Be aware that the loading indication that you see doesn't represent a real indication of what is happening. It just starts increasing till about 50% of the bar is filled and if it takes too long then the steps get smaller (half what is left as available space in the end or stop at all).
    There is also the Net tab on the Web Console that can show how long it takes to load content.
    *Firefox > Web Developer > Web Console

  • I hit Reset and lost everything.  I have the apple and a line under it.  How can I get the Home Page back?

    How can I get back to the Home Page?  I hit reset and lost everything.  I have a dark screen with the white apple and a line under it. 

    Wait until it finishes restoring. It would be a good idea to connect it to the charger so it won't run out of power during this process.

Maybe you are looking for