I can't get the sound to work

I just got the
HP ENVY Phoenix 810-160 and I can not for the life of me get the sound to work. I am using it with a HP Envy 23 inch monitor that also has Beats audio and an HDMI cord hookup. I have gone through all the steps on the monitor support page and the desktops support page. Any help out there? Thanks in advance.
This question was solved.
View Solution.

Hi,
No, this is not going to work, you can't hook the desktop to the AiO 23 and get sound from the AiO 23.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Similar Messages

Help, please! i can not get the sound to work on my pc

i can not get the sound to work on my pc

Try opening the device manager and remove your sound hardware and then rediscover. This works often. Let me know how it goes.
iGirlTech

Can't get the sound to work on my 5th Gen iPod 30gig movies

For some reason, every movie that I have on my iPod, mainly music videos, have no sound. I just bought this iPod and I am still learning how to use it, however I cannot find anything in the forums to help me troubleshoot this problem. Can anyone give me any pointers on how to get my sound to work with my movies? Thanks

Quicktime, Quicktime Pro and iTunes don't convert "muxed" ( muxed means multiplexed where the audio and video are stored on the same track) video files properly. It only plays the video and not the audio.
See:iPod plays video but not audio.
You need a 3rd party converter to convert the file with both audio and video.
See this for help: Guide to converting video for iPod (Mac/Windows).

How can i get the sound to work again? it doesn't ring, play music but siri works :/

Is there anything i can do to fix this? i just restored the iPhone and it still doesn't work. please help
thanks!

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the problem continues, take the device to Apple for evaluation and possible replacement.

I can't get the sound to work on my videos

I have a couple of videos in my itunes and I am able to convert them so that they appear on my ipod but there is no sound while the video plays
Fifth Generation U2 ipod Video Windows XP

Jeff,
Unless I'm misunderstanding something technical, I think we're talking about two different things. Yes, I understand your point about copying DVD's, copy protection, etc. But the main point of this, and other, threads is not about breaking copy protection; it's about successfully converting video to put it on iPod, and retaining the audio. I have a bunch of short, non-copy protected, non-copyrighted video clips on my computer that the Conversion tool in iTunes simply won't convert with audio. That's where the "muxed" thing comes into play, or whatever it is. My clips vary: some are .mpg, some are .avi, whatever. I don't think iTunes successfully converted a single one of them. I ended up downloading some third party software that I learned about in these discussion forums.
That's my point. Whatever it is that these third party programs do, why can't Apple make iTunes do it?
Am I missing something? Are what these programs doing tied into breaking copy protection? Is there some link between "de-muxing" (is that right?) and removing copy protection? I plead ignorance on this one.

How do I get the sound to work?

I can't get the sound to work on my Mac, even after going into System Preferences. It is brand new so this is very disappointing. Can anyone help?

Hi,
Can you post back with the following.
1. The full Model No. and Product No. of the notebook - see Here for a further explanation.
2. The full version of the operating system you are using ( ie Windows 7 32bit ).
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have a new iPhone 5C, have the sounds alerts set up. But I'm not getting sound alerts for new voicemail, only the red circle on the screen. How can I make the sound alert work?

I have had this same problem for weeks now with my 4S. I just got a new 5S after being extremely frustrated and the same thing - no sounds. After searching posts all over, I couldn't find a solution. I just told my friend of the issue and he asked "Do you have the Do Not Distrub on?" I didn't even know such a function existed. Upon looking that was exactly the issue.
To resolve, go to Settings> Do Not Disturb> Manual. If it is green, turn it off. You will now get phone calls and text alerts.
This functionality is also on your quick access utility menu (slide up menu). I assume this is how it was enabled on my phone.
I will post on other sites since I searched for weeks for this solution and didn't see it anywhere. Good luck!

I can't get any sound to work on my iPhone 4S unless I have the headphones plugged up. Help...

i can't get any sound to work on my iphone 4s unless the headphones are plugged up

http://support.apple.com/kb/TS2802

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button, and my volume control on my I pad won't do anything either, but the volume of all my alarms and sounds works perfect, what can I do??

I can't get the volume to work when I watch a you tube video, there's no volume slide under the play button and my volume control on my I pad don't do anything to help, but yet my volume works perfect on everything else, what can I do???

do u have your ipad doing airplay because that could happen

Compaq Presario R3000 how to get the sound to work with Windows 7 RC

1) Download SP29586.exe: ftp://ftp.hp.com/pub/softpaq/sp29501-30000/sp29586.exe
2) Run it, Create a directory c:\ swsetup
3) Once all the Files are extracted DO NOT INSTALL
4) Now Goto the Start Menu Click on Devices and Printers, the Click on the Name you have called your machine this will be marked will a yellow triangle as the sound driver windows 7 has install already is a realtek ac 97 which is not working,
5) Once your Machinename you will see a general tab and and hardware tab select the hardware tab.
6) Look for the Realtek ac 97 under the Device functions, select that and click properties,
7) Now tab to the Driver, now click update driver,
8) Select the option let me pick from a list of devices drivers, now click have disk
9) Click on Browse select the following location Swsetup\SP29586\SMAXWDM\W2K_XP and click on smwdmCH6.inf
10)Now the Soundmax Driver should come up select ok and next. Now your Sound will work
This question was solved.
View Solution.

I am basicaly having the same problem with my labtop. I tried the following above and yet I still have not been able to get my sound to work. I have had some problems with my power and sound cards before but after I reinstalled windows my graphics card and sound card have not been working to their full potential. I thaught that it was a 64 bit graphics card, but now I am not so sure. I had to jostle the power cord in the back till I mannaged to find a perfect spot to keep the computer running. Before the reinstallation I had to put pressure on the left side of the computer to get the sound to work.. but even then it still came in and out.. "The sound that is." I can see the same driver in the codex menue and it is yellow but, what you stated above did not work.
It says (Cannot continue the hardware update) The wizard cannot find a better match for your hardware than the software that you curently have installed. and then tells me to keep the current software. My sound Icon does not show up when I go to the settings.... I can't play diablo 2 on this no idea why... But my screen is choppy when I scroll through internet sites and it did not do that before. I have a 400mbs connection .... here is my computer information. :Compaq Presario R3000 Intel pent4 2.80ghz 2.80ghz 1.12GB ram and im running on windows xp2 professional.

I cant get the sound to work on my iphone 4 after i record a movie

after i record a short video i am unable to get the sound to work. what am i doing wrong?

Did you already try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again? You will not lose data, but a reset can cure some glitches.
If this does not work, try to set it up as new device, explained in this article:
How to back up your data and set up as a new device
Don't use the backup afterwards, to rule out a software problem. If the camera is working again, restore from the backup.

Can't get the software to work with Audigy 2

Hi, I have had my Audigy 2 ZS going on a year now and haven't had any problems. I recently made a clean install of Windows XP and upgraded to SP2 and all that. Now, I can get sound out of the card but can't get the software to work at all; cannot get the volume slider bar to appear when I click the icon (it appears in the task bar though and I get a small gray square where the slider should appear), the surround mixer does not show when I double click the volume icon, EAX conxole is a no go, get an empty error box when I try to start the Equaliser.
I have tried everything from simple re-install to clean sweep to praying to the pagan gods. I have alsoo tried updating the drivers of course.
I run XP on an Intel MoBo (on-boeard sound deactivated), 52RAM, ATI 9700 ALL-IN-WONDER.
DOES THE CREATIVE SOFTWARE DEPEND ON ANY WEIRD LITTLE WINDOWS SERVICE OR SETTING THAT I MIGHT HAVE CHANGED DURING SETUP?
This is quite infuriating as any idea I come up with takes up a lot of time in installation, uninstallation and clean up. It worked before, why not now?
Thanks in advance. dentore

Ok I got it to work. This is the reply I got from Creative but I didn't remove the program from the add/remove option on the PC b/c that didn't work at first. I inserted the installation CD and remove it from that wizard. Rebooted and the PC found new hardware. I then installed the driver and software from the CD and now it works.
For Mediasource. It appears something was corrupted in Mediasource or there is a conflict within the system.Please uninstall all software and drivers for the soundcard, from add/remove programs. Once this is done, shut down the system and changePCI slots for the soundcard, then turn the system back on, cancel the found new hardware wizard, disable all background applications (especially virus scanner, firewall, and any other background applications running in the bottom right hand corner of the system), andthen perform a full reinstallation of the drivers and software from the soundcard installation cd.
CAT I hope you fix your sound card. Good luck.

I can't get the volume to work when I use firefox. It does work on internet explorer. What is going on?

I downloaded firefox in order to do some online training that I couldn't open in any other browser. I can't get the volume to work in this browser. I can use internet explorer and the volume works. But I can only do the training through firefox.

You can click the Volume icon on the Windows Taskbar near the clock and click the Mixer link at the bottom to open the mixer.<br />
You can adjust the volume level for each application in that window, so make sure that Firefox is not muted or set at a low level.<br />
Current Firefox versions use the plugin-container process to run plugins, so you need to check the volume setting for the plugin-container process.<br />
You will only see the Firefox program or the Plugin Container in the Mixer if you are on a website that plays sound.<br />
See also:
* https://support.mozilla.org/kb/No+sound+in+Firefox
* https://support.mozilla.org/kb/Video+or+audio+does+not+play

I can't get the sound!

Hi! I can't get the sound by using itunes & mplayerx & other video players even though I turn up the volume, but I do hear the sound on Youtube and other online players. Why this situation happened? btw, my quicktime works well. I really like mplayerx, but I cant get the sound! Can someone help me address this problem? Thanks so much!

If the reboot does not work go here: http://mplayerx.org/support.html

I muted the sound while playing angry birds and now I can't get the sound back. I have the sound on ipod, just not with the games.

I muted the sound while playing angry birds and now I can't get the sound back. I'm fine with ipod, just the games

If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds have been muted.
System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
This support article from Apple explains how the side switch works.
http://support.apple.com/kb/HT4085

I can't get the sound to work

Similar Messages

Maybe you are looking for