I can't get voiceover to play back on iMovie. What's going on?
I can't get voiceover to play back on iMovie. It seems to be recording just fine, but when I click to play back, no sound. I'm using the internal mic. Anybody have any idea what's going on?
Version of iMovie device your using it on (iPhone or iPad?)
Similar Messages
-
Using the camera on my iPad 2, I can record videos, but can't get them to play back. Can you help me with this? Thank you!
Previous version was a touch to change, this one is a slide to change.
-
Can't get sound to play back on Movie Maker when recording with internal webcam/microphone
I have a Windows 8, 64-bit Envy notebook. I tried using Google Hangouts but there wasn't any sound (the camera was fine).
Later, I decided to test the internal microphone myself by creating a Movie Maker file, and clicking on Webcam and making a recording. The camera worked but it played back in total silence.
I checked the settings for the microphone and the internal mic was properly set as the default. I turned up the volume to the maximum. Then I found directions for doing a sound check, and I was able to do the Sound Recording check and get audio when I played the file back.
But when I tried again to make a video, i got zero in the playback.
Any idea what's going wrong?
Thanks,
PatHello Myerspat,
Welcome to the HP Forums, I hope you enjoy your experience!
I have read your post on how you are not able to get sound from your notebook computer, and I would be happy to assist you in this matter!
To restore the audio to your notebook, I recommend following this document on No Sound from Speakers (Windows 8). This should help with the playback on your system.
In addition, you can also follow @SuperMario1's thread on Troubleshooting Guide: Audio does not Work after a Certain Period of Time. This guide should help with your notebook's audio output in regards to a recent Windows Update.
For more assistance, I will need to know:
The Product and Model Number of your notebook computer.
If your computer has completed all of its important Windows Updates.
If you have updated your HP drivers using the HP Support Assistant.
If this is an on-going, or recent issue.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
Ipad2 froze after trying to upgrade to ios6, how can i get it to come back on?
ipad2 froze after trying to upgrade to ios6, , have a black blank screen. how can i get it to come back on?
What to Do When Your iPad Won't Turn On
http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
iPad: Basic troubleshooting
http://support.apple.com/kb/TS3274
iOS: Resolving update and restore alert messages
http://support.apple.com/kb/TS1275
iPad: Unable to update or restore
http://support.apple.com/kb/ht4097
Cheers, Tom -
Firefox 3.6 allowed me to play games, Firefox 4 upgrade doesn't.Question
After updating to Firefox 4, I have lost 4 plugins/add ons due to their NOT being compatible. I can no longer play my bejewelled game. Please help me here. Can I get Firefx 3.6 back? Will that help me?http://support.mozilla.com/en-US/kb/Installing+a+previous+version+of+Firefox
http://www.mozilla.com/en-US/firefox/all-older.html -
I have my ipod backed up on multiple computers but only one computershows all my playlists. How can I get all my play lists to show up on multiple computers?
If you want to connect and use an iPod on more than one computer you need to change the update preference in the iPod Summary tab to "Manually manage music and videos" and click Apply.
Using iPod with Multiple computers
Managing content manually on iPod
If your iPod is set to update automatically take care when connecting to a different computer if your current one is out of commission. You will get a message that your iPod is linked to a different library and asking if you want to link to this one and replace all your songs etc, press "Cancel". Pressing "Erase and Sync" will irretrievably remove all songs from your iPod. Your iPod should appear in the iTunes source list from where you can change the update setting to manual and use your iPod without the risk of accidentally erasing it. -
On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed
Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You -
How can I watch a Disney movie from the Disney website I have purchased movie cd and I can go to the website on by gateway computer but can't get it to play on my iPad it wants me to download flash but apple doesn't support flash or I can down loadQuickTime but don't know how. Says to email website did that but takes me back to same place to email help
Contact iTunes Customer Support, but honestly, there are no returns for iTunes purchases.
-
I can't get dvds to play and, instead, get "There was an initialization error. A valid video device could not be found for playback. [-70017]" I went in for a Genius appt Friday and it played for the tech...but now I'm back home (one and a half hours from the store) and I'm getting the error message again when I try to load a dvd. Any recommendations?
Hello, try this...
Bootup holding CMD+r, or the Option/alt key to boot from the Restore partition & use Disk Utility from there to Repair the Disk, then Repair Permissions.
Reboot... any change? -
Can't get ipod to play a podcast a second time
Help!
I have no trouble getting and playing podcasts on my ipod mini, but once I finish listening to the podcast, it dissapears from the ipod and will not reload back on the ipod no matter what I've tried.
The podcasts are still in iTunes and will play in iTunes, I just can't get them to play again on the ipod.
I don't have fast connection, so I'd rather not reload them.
I'm using iTune 5 iPod 1.4.
Thank you,
Mark Evansif that still fails, try renaming the project to something MUCH shorter:
http://www.bulletsandbones.com/GB/GBFAQ.html#renameproject -
I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
I recently purchased QuickTime 7 Pro to convert avi files to mov files for editing on Imovie. However, QuickTime won't play the files. How can I get them to play and how can I convert them to mov files?
Both the AVI and the MOV file extensions refer to the file container and not the compressed data the file contains. Both are generic file containers in that each may contain any valid combination of audio and/or video data that is compatible with the codec component configuration of the system on which the file was created. On the other hand, whether a file is playback compatible, conversion compatible, and/or edit compatible depends on the data actually contained in the file container. So, you are basically dealing with two separate issues here—the container and what is inside it.
Basically, if you want to make your files ediit compatible with iMovie, you must change your file container to one that is acceptable to iMovie and convert the data to edit compatible audio and/or video compression formats as may be necessary. The best approach is to determine what codecs were actually used to create the original AVI files and add them to your system if possible. In most cases a codec package like Perian can be added to your system's codec component configuration to may the AVI file playable. Once they are playable, in the QT 7 app then they can be chnged or converted to file types and compression formats that can be edited in iMovie. (While Perian handles most codecs commonly used to create AVI files, it does not handle all possibilities and, while the Perian codec package still works under cureent Mac OS versions, its development group has decided to drop further development/support of the package.)
Background: AVI is a file container originally developed by Microsoft back in 1992 but for which official support was discontinued about 11 years. Despite its limitations, Windows users still tend to use this file based on its open source ease of use and generic nature, thus, making its use so popular that most users are unwilling to switch to more modern but less generic file types. Since some AVI legacy compression formats have never been transcoded for the Mac or use beyond OS 9 or OS X PPC platforms, it is often important to know what specific compression formats are contained in the AVI file to know which codecs to add to your system and which not to add in order to avoid possible codec conflicts.
You can use many different converters to convert AVI files to iMovie edit compatible files. Most third-party apps contain their own buit-in codecs which do not relay on the Mac codec component configuration. Free ones, like HandBrake, usually have limited conversion capabilities while those that have more varied outputs are usually commercial in nature and will cost you additional cash. QT 7 Pro or the free MPEG Streamclip app allow you to access you own system's component configuration and use any available codec component like DV, AIC, MPEG-4, H.264, Photo JPEG, etc.—all of which are iMovie compatible for editing purposes—but only after making the AVI file QT 7 player compatible.
In order to determine what compression formats wewre used in your AVI files you can
1) Try checking the Finder "Info" window,
2) Use the "Inspector", "Media Info", or "Properties" window of any player app that will open the file, or
3) Use a general media utility app like "MediaInfo" to read the file characteristics. -
Hi I can't get iPhoto to play videos - I double click but nothing. If I drag the video to the desktop and double click it opens fine??
Help anyoneHi T - Well now I am confused, when I 'check for updates' it says one is available but when I run software up date it comes back and says i am up to date. I ran repair permissions and all was well - but still shows my version as 8.0.1. I think there is something deeper as I can't run a game I bought for mt grandson "spore" I get error SHA01 -
Examining File : /Contents/Resources/transgaming/c_drive/Program Files/EA Games/Spore/Data/CSA_Graphics.package -> SHA1 Error
Examining File : /Contents/Resources/transgaming/c_drive/Program Files/EA Games/Spore/Data/CSA_Main.package -> SHA1 Error
Examining File : /Contents/Resources/transgaming/c_drive/Program Files/EA Games/Spore/SporeBin/SporeCreatureCreator.exe -> SHA1 Error
Thanks for your time and thoughts
Mike -
My apple ID has been hacked so I had to create a new account, how can I get my old account back?? My iPhone and iPad are linked to the account i lost
freedone wrote:
Great! Yes mysterious is best way to describe internet eh lol. It could be that I have asked other questions that had absoulutely no relevance to the current q, onto previous questions. So I am going to look thru them all..
I did say m i s c h i e v o u s didn't I? Mysterious it is though too.
Regarding the latter, I have some tips for searching... (WARNING: I don not have a high opinion of the Forum Search abilities)
Discussion Search
https://discussions.apple.com/search.jspa?type=discussion&q=Great!&author=%2Fpeo ple%2F946207&sort=updatedAsc
The above is what is called "Space Search"
I used the first word of you above post " Great! " with a couple of filters applied - found this thread and one other
If you can think of any term you may have used, it may be of some benefit to use this search
ELSE
I am VERY fond of Google "Site Search" for all of Apple.Com and its subdomains...
a mere search for your username with quotes no brackets [ "freedone" ] yielded 313 results - but there IS another username "freedoneb" that may take up some of that real estate
https://www.google.com/?gws_rd=ssl#safe=off&q=%22freedone%22+site:discussions.ap ple.com -
I bought a song on iTunes...but it must not have downloaded all the way an now I can't get it to play and it won't let me delete it...I also can't purchase it again cause it says I done bought it...any suggestions?
Try this:
http://support.apple.com/kb/HT2519 -
How can I get audio to play from my TV when using hdmi cable? Video looks great, just no sound.
I've tried plugging the hdmi into the TV directly and the receiver.
I get video every time. HBO to Go , Xfinity, ABC, Youtube, etc...
just no audio. Any suggestions?
I've tried starting the apps then plugging in the hdmi cable.
I never tried this before I upgraded to IOS 5.Claudiamil-
I had not tried it with mine since upgrading to iOS 5, so I just did. I'm using a small Vizio HDTV. I did not try YouTube, but did try several videos and musical numbers. In all cases there was sound, including stereo when the source had it.
I assume you are getting sound from the iPad when the adapter is not connected, so the volume is not turned down. Dah*veed's suggestion to reset may be what you need.
Fred
Maybe you are looking for
-
I plug in my iPod to charge from my computer and it syncs with my iTunes, but I've been getting a message that a list of 13 of my apps cannot be loaded onto my iPod because it doesn't have the latest software to support them. I have done all the soft
-
Boot Camp - No Device Found - Late 2011 MBP
Hello All, Recently i have attempted to boot camp my late 2011 macbook pro using a bootable Windows 7 Professional IMG File and a bootable Windows drive. Creating the Bootable Drive had no issues, though, while trying to install windows onto the part
-
How to include XML Prolog in BPEL SOAP message.
Hi, I'm using SOA Suite 11g on WebLogic and have a BPEL Process in a composite application that is calling a third party SOAP Web Service. Whilst it is standard for a SOAP service to not care whether or not the SOAP message includes an XML Prolog (<?
-
Why is my iphone sending messages from my email and not my number?
My phone will send messages from my email rather than my number. I have gone to the settings to switch it to send just from my number. When i do that, it does not send. What do i do to fix this problem!?
-
Is there only ones size of card you can get?
I was making a card on iphoto, and the only size available was 7" x 5". Is that the only size?