I can't get Windows installer running

Hi
I have build a machine with x79A GD45.
every thing seems to work in bios, but I can't start Windows installation.
See my configuration below.
There is only a courser in a black screen.
Can anybody help.
Mcart

Quote
i7-3820 LGA2011
Quoted from an earlier X79 general informational thread;
"Before the purchase of an Intel i7 3820 for your mainboard, please check the UEFI/BIOS version installed. In most cases, there are green stickers on the BIOS chips with the 'as shipped' version written on them. On my X79A-GD65(8D), there are no green stickers. In that situation, the only option is to contact MSI Tech Support with the serial number so they can check for you what version was shipped on the mainboard.
How do I get my i7 3820 CPU fully supported? The answer is either use a CPU that is supported & flash the version that supports it, take it to a pc shop that can flash for you, or send it to MSI & have them flash it for you. Please keep in mind, if the mainboard is equiped with two BIOS chips, have both flashed".
Since you are fortunate enough to get into the UEFI/BIOS, look in the Settings section, sub-menu System Information to get the installed version Jack has requested.

Similar Messages

  • Where can I get Window's software for my Macbook Pro? I'm trying to run ARCview. However, it requires Windows. I'm trying Bootcamp. but, it isn't recognising the disk that I currently have.

    Where can I get Window's software for my Macbook Pro? I'm trying to run ARCview. However, it requires Windows. I'm trying Bootcamp. but, it isn't recognising the disk that I currently have.

    Maybe because it's not a 'genuine' retail version? Many OEM versions just don't work - and I've no idea which flavor of Win7 your friend downloaded. Obviously one that Boot Camp doesn't recognize. Best to just pony up the cash for a full retail version, of some flavor - and use it. You COULD, of course, download the 14-day trial version of Parallels Desktop and see if you can install Win7 as a virtual machine... it might or might not work. Boot Camp just isn't finding the resources it needs on the copy you have - try Parallels and if that doesn't work just purchase a retail (or student discounted) version.
    Clinton

  • HT4796 I can not get windows migration assistant to work on my Sony Viao running windows 7

    I can not get windows migration assistant to work with Sony Laptop running windows 7.

    Hello,
    - What did you do so far ?
    - Do you have any error messages ?
    You will find a lot of useful informations on this page :
    http://support.apple.com/kb/HT4796

  • Cnat update itunes get windows installer error message

    When trying to update itunes get window installer error message. Running windows vista

    What's the precise text of the message, please? (There's a few different ones I can think of that you might be getting.)

  • Issue with Illustrator CS6 - can't get it to run

    Since a couple of weeks ago, I have an issue with Illustrator CS6 - can't get it to run When starting the application I get the following error:
    "The procedure entry point ?AcquireVarient@ImageInterface@drawbot@dvaui@@QBE?BV?$intrusive_ptr@UImageInterface@drawb ot@dvaui@@@boost@@V?$rational@J@5@@Z could not be located in the dynamic link library D:\Program Files\Contents\Windows\Illustrator.exe."
    I'm running it on Windows 8 (x64). I have multiple other Adobe applications installed, which are running fine. I've tried solving the issue with reinstalling Illustrator - multiple times. My GPU driver is updated to the latest version.

    I have this issue as well on my Mac and called tech support 4 times and they can't fix it. Adobe has really gone down hill in a short amount of time!!
    Only thing that worked (as a temporary fix) is to create a new user and toggle back and forth between two users which is very annoying. Adobe has tried uninstalling, reinstalling, taking over my computer remotely, trashing plugins, verifying permissions but the fact remains that we bought CS6 four weeks ago and Illustrator doesn't work.
    I'm going on Facebook to let others know.....don't buy Adobe, it doesn't work and they don't know how to fix.

  • Trying to download update to iTunes in Vista but get Windows installer error. How do I update?

    Trying to download update to iTunes but get Windows Installer error.  How do I correct?

    many thanks.
    "There is a problem with this Windows Installer package.  A program required for this install to complete could not be run.  Contact your support personnel or package vendor."
    Perhaps let's first try updating your Apple Software Update.
    Launch Apple Software Update ("Start > All Programs > Apple Software Update"). Does it launch and offer you a newer version of Apple Software Update? If so, choose to install just that update to Apple Software Update. (Deselect any other software offered at the same time.)
    If the ASU update goes through okay, try another iTunes install. Does it go through without the errors this time?

  • Can't get Videos to run on the Internet

    Can't get Videos to run on the Internet. Clicked to watch a video and nothing happened. Sales person in Apple store said to get "Flip4Mac", free edition, which is what they used in store as the files on this site and in Windows Media. I downloaded it and I think I installed it. At least it said is was installed and updated. But when I went to my Son's favorite website, Nascar.com, when he clicked on a video to watch nothing happened. Anyone have any idea what's wrong?
    Thanks in advance for the help.....Nancy

    First off, I'll list all the items that I use to play, just about, all media on the web:
    Flip4Mac
    (as you might have found out, Windows Media Player for the Mac is no longer supported)
    VLC
    Real Player
    Perian
    Adobe Flash
    Streamclip
    All that being said, there is still some unplayable A/V content on the web. Even though it's listed as WMV, they are really processed with a codec that is underneath that wrapper, and unsupported by any of the above listed apps and plug ins. If any content like this is found on a high profile site, and is in wmv format, then the Flip4Mac people request to be told, so they can see if compatibility can be written in on their next update.
    Generally, video playback on a Mac can be somewhat complex. Would be nice if everyone used Quicktime, but I don't see that happening on the PC end of things anytime soon. So, we'll all just have to use what we can to view content.
    RE: learning Leopard....there are some tutorials on the Apple support site, but I've always found the suppot discussions to be pretty helpful. I've never been one to get a lot from manuals. Mostly, I get my knowledge from working with the apps I need, and getting advise from others who have done whatever. Occasionally, there's a class at the college that you might look into. Anyway, feel free to ask any questions you want on this forum, or drop me an email. [email protected]

  • If I use Bootcamp, can I get Windows viruses on my Mac?

    I am using Mac OS X 10.8.3. I am about to install Windows 7 on my iMac with Bootcamp. Can I get Windows virus on my Mac because of Bootcamp?

    If you do, it'll only affect the Windows partition of your hard drive.
    If you feel really worried, I'd suggest running Windows in a virtual machine using Parallels or similar. You can set things up so that there's no access to your Mac from the virtual machine and, if the VM gets a problem, you can just delete it.

  • Exchange 2013 remote session running as PowerShell version 2.0. How can I get it to run version 3.0?

    I'm trying to use the newer Powershell 3.0 features, particularly the ability to disconnect/reconnect a remote session, for our Exchange 2013 administration tools.  I have 3.0 on my workstation, and am connecting to a remote session on an Exchange 2013
    server (on Server 2012).   Even LOCALLY on the Exchange 2013 server Exchange Management Shell I get the same behavior:
    Exchange Command Shell on an Exchange 2013 server (running Windows Server 2012)
    [PS] >$PSVersionTable
    Name                           Value
    PSVersion                      3.0
    WSManStackVersion              3.0
    SerializationVersion           1.1.0.1
    CLRVersion                     4.0.30319.19117
    BuildVersion                   6.2.9200.16628
    PSCompatibleVersions           {1.0, 2.0, 3.0}
    PSRemotingProtocolVersion      2.2
    [PS] C:\Windows\system32>Get-PSSession
     Id Name            ComputerName    State         ConfigurationName
      1 Session1        mercmbx35r.n... Opened        Microsoft.Exchange
    [PS] C:\Windows\system32>$session = Get-PSSession
    [PS] C:\Windows\system32>$session.ApplicationPrivateData.PSVersionTable
    Name                           Value
    PSVersion                      2.0
    PSCompatibleVersions           {1.0, 2.0, 3.0}
    PSRemotingProtocolVersion      2.2
    BuildVersion                   6.2.9200.16628
    CLRVersion                     4.0.30319.19117
    WSManStackVersion              3.0
    SerializationVersion           1.1.0.1
    How/where can I force the Exchange session to run version 3.0?
    Thanks in advance,
    Rick Tatem

    I still can't get it to work that way. I changed my cfexecute to:
    <cfexecute name="C:\windows\system32\cmd.exe" arguments="/c C:\Inetpub\wwwroot\captcha\#cmd_filename#" outputFile="C:\testoutput.txt" timeout = "90"></cfexecute>
    And I changed my bat file to have:
    <cfsavecontent variable="cmd_content">
    cd\
    TSC.exe /s "#newString#" C:\Inetpub\wwwroot\captcha\#FileName# Mary (for Telephone)
    </cfsavecontent>
    The output file is showing:
    C:\ColdFusion9\runtime\bin>cd\
    C:\>TSC.exe /s "3.....P.....4.....Z.....8.....U.....7.....X....." C:\Inetpub\wwwroot\captcha\3P4Z8U7X-105724.wav Mary (for Telephone)
    I still can't get it to run the exe. I have watched the process list while running this and the exe doesn't show up. I tried cfexecute on the exe directly before trying the bat method, with hard coded arguments, and it still didn't work. I am so lost right now this makes no sense to me.

  • Post-Install Issue - Windows Installer runs every time CRW XI R2 loads

    I have XP SP3.  If I uninstall CR XI SP2 and re-install CR XI from cd, it loads perfectly - no windows installer.  When I uninstall CR XI, and re-install CR XI SP2 from the saved download on my harddrive, the Windows installer runs every time I load it; it seems to think it's never been run before.  Takes 3-8 minutes to load every time, which is completely annoying.
    I have also tried downloading that full build of XI SP2 3 times - and uninstalling/reinstalling.  Makes no difference.
    I know this is not a design issue, but I didn't know where else to turn.  I have been tolerating this issue for about 18 months and I can't take it any more! 
    Thanks!

    Hi,
    Please try using other computer units then update me the result, the purpose is to check if your unit OS may be the problem.
    Regards,
    Clint

  • Help Mac-brothers: can't get Windows to install

    Thanks for reading. No matter how I try, I just can't get Windows (either Vista or XP Pro) installed on my Macpro! I made a partition with Bootcamp, started the installationprocess, on asking where to put Windows I selected the Bootcamp-partition and reformatted it. No matter what I do, it keeps telling me that it can't install Windows becouse it does not see a suitable sytem volume. what am I doing wrong? It drives me mad. Any help is welcome. Thank in advance!

    Vista x64 doesn't like the NTFS partition BootCamp creates, so you have to delete and format, then reboot off the Vista DVD again.
    And sometimes it only works if OS X is nowhere to be found (removed).
    I always put Windows Vista on its own hard drive. And pull my OS X drive.
    Having four drive bays, very easy.
    Never tried with Pro. And in fact, I only 'tested' BootCamp Assistant once or twice. I just format a drive as FAT and then let Vista format it. BCA isn't necessary, and you can install the Apple drivers later when Windows is fully installed, patched, updated, and running fine.

  • Where can i get windows 7 home basic for my ideapad z570?

    HelloMy hard disk got corrupted and i had to replace it with a new one. my laptop came with preinstalled windows 7 home basic and a product key at the back. with one key recovery, the backup of os was in the older hard disk which can not be recovered. how can i install the older windows 7 version with the given product key?

    Penguin555 wrote:
    Penguin555 wrote:
    where can I get windows 7 keyboard and mouse drivers for bootcamp?
    I have installed Windows 7 in a boot camp partition. I can only use usb keyboard and mouse by booting Windows intyo safe mode, and I am totally unable to use my Apple wireless keyboard and mouse. How do I resolve this?
    I'm running Lion - 10.7.2. Boot Camp Assistant fails to download drivers - that issue has been going on for some time, and has been reported by others as well.
    But that answers your question.  You get the drivers by using BCA to download them.  Your inability to download the drivers is a separate issue than not being able to use your wireless keyboard.
    While some people may have issues downloading the drivers, many others have successfully downloaded the drivers.  I have downloaded them fine on several different Macs.  It may take a long time, depending on the speed of your internet connection.  Mine took over 3 hours.
    Regardless, you need to download the drivers using Boot Camp Assistant.  Try again, and if you still have problems, start a new thread and provide as much details as possible to describe what your seeing so that we don't have to go through this back-and-fourth, and you'll get your answer quicker.

  • AppleScript error with iTunes: Can't get window 'iTunes' of class pcap ...

    Hi there. I'm working on a script that posts iTunes track names to Campfire based on the AirPlay device in use. I've been getting a "Can't get window 'iTunes' of <<class pcap>> 'iTunes' of application 'System Events'" and was hoping someone might see an obvious answer. The error pops up randomly. Some machines receive the error much more often than others. Here's the code:
    global current_track
    global last_track
    global campfire_token
    global airplay_device
    global campfire_room
    global current_device
    (* Begin user defined settings ************)
    set campfire_token to "123456" (* Your Campfire API authentication token *)
    set airplay_device to "Apple TV" (* The name of your AirPlay device *)
    set campfire_room to "https://yourorg.campfirenow.com/room/123456/speak.xml" (* The Campfire room you'd like to post to *)
    (* End user defined settings *************)
    set current_track to ""
    set current_device to ""
    set last_track to ""
    on idle
              if application "iTunes" is running then
                        tell application "iTunes"
                                  if player state is playing then
                                            tell application "System Events"
                                                      tell application "iTunes"
                                                                set minimized of front browser window to false (*This AppleScript can only function when iTunes is not minimized.  *)
                                                                delay 2
                                                                set visible of front browser window to true
                                                                delay 2
                                                                set current_track to current track
                                                      end tell
                                                      delay 2
                                                      set current_device to the description of button 8 of window "iTunes" of application process "iTunes" of application "System Events"
                                            end tell
                                            delay 2
                                            if current_track is not equal to last_track then
                                                      if current_device as string is equal to airplay_device & " AirPlay" then
                                                                tell application "iTunes"
                                                                          set current_track to current track
                                                                          tell current_track
                                                                                    set trackName to (name)
                                                                                    set artistName to (" :: " & artist)
                                                                                    set albumName to (" :: " & album)
                                                                          end tell
                                                                          set track_info to (trackName & artistName & albumName) as string
      (* Replace apostrophes *)
                                                                          set search_string to "'"
                                                                          set replacement_string to "&#39;"
                                                                          set AppleScript's text item delimiters to the search_string
                                                                          set the item_list to every text item of track_info
                                                                          set AppleScript's text item delimiters to the replacement_string
                                                                          set track_info to the item_list as string
                                                                          set AppleScript's text item delimiters to ""
      (* Replace quotation marks *)
                                                                          set search_string to "\""
                                                                          set replacement_string to "&#34;"
                                                                          set AppleScript's text item delimiters to the search_string
                                                                          set the item_list to every text item of track_info
                                                                          set AppleScript's text item delimiters to the replacement_string
                                                                          set track_info to the item_list as string
                                                                          set AppleScript's text item delimiters to ""
                                                                          set shellCommand to ("curl -u " & campfire_token & ":X -H 'Content-Type: application/xml' -d '<message><type>TextMessage</type><body>" & track_info & "</body></message>' " & campfire_room)
                                                                          set shellCommand to shellCommand as string
      do shell script shellCommand
      (*display dialog shellCommand*)
      (*log "Posting to Campfire:" & shellCommand*)
                                                                end tell
                                                                delay 2
                                                      end if
                                            end if
                                            set last_track to current_track
                                  end if
                                  return 1
                        end tell
              end if
    end idle
    Thanks for your help. Any suggestions are appreciated!

    well, for information's sake, the cleaned-up script looks like this:
    (* Begin user defined settings ************)
    property campfire_token : "123456" (* Your Campfire API authentication token *)
    property airplay_device : "Apple TV" (* The name of your AirPlay device *)
    property campfire_room : "https://yourorg.campfirenow.com/room/123456/speak.xml" (* The Campfire room you'd like to post to *)
    (* End user defined settings *************)
    global current_track, last_track, current_device
    on run
      (* init at runtime*)
              set current_track to ""
              set current_device to ""
              set last_track to ""
    end run
    on idle
              if application "iTunes" is not running then return 60
              tell application "iTunes"
                        if (player state is not playing) or (current track is equal to last_track) then return
                        set last_track to current track
                        set minimized of front browser window to false
                        set visible of front browser window to true
                        set current_device to my getDevice()
                        if current_device as string is not equal to airplay_device & " AirPlay" then return
                        set track_info to my mungeText({name, artist, album} of last_track, "", "::")
                        set track_info to my mungeText(track_info, "'", "&#39;") -- Replace apostrophes
                        set track_info to my mungeText(track_info, "\"", "&#34;") -- Replace quotation marks
                        set shellCommand to ("curl -u " & campfire_token & ":X -H 'Content-Type: application/xml' -d '<message><type>TextMessage</type><body>" & track_info & "</body></message>' " & campfire_room)
      do shell script (shellCommand as string)
      (*display dialog shellCommand*)
      (*log "Posting to Campfire:" & shellCommand*)
                        return
              end tell
    end idle
    on getDevice()
              tell application "System Events"
                        tell process "iTunes"
                                  return description of button 8 of window "iTunes"
                        end tell
              end tell
    end getDevice
    on mungeText(itxt, stxt, rtxt)
              set tid to AppleScript's text item delimiters
              if class of itxt is text then
                        set AppleScript's text item delimiters to stxt
                        set itxt to text items of itxt
              end if
              set AppleScript's text item delimiters to rtxt
              set otxt to itxt as text
              set AppleScript's text item delimiters to tid
              return otxt
    end mungeText
    I'm positive there's a better way to check if AirTunes is the active device (maybe by seeing if the current playlist is a device playlist, and checking the source name?), but I don't have any way to test that.

  • Satellite A200-1M4: Can I get Windows Vista separately?

    Hello
    When I install Product Recovery CD, it installs Windows Vista and many programs I don't need.
    I want just to install Windows Vista (even excluding drivers).
    So, can I get Windows Vista (Home Premium) setup separately?
    Thanks

    Hello
    There is no separately setup. You are not alone with this opinion and nobody force you to use all installed stuff. I remove also all stuff I do not need.
    Install OS using recovery CD, download all Microsoft updates to be sure everything is up to date and then remove all stuff you do not need. Believe me I do the same.
    Just for example - I have one Satellite delivered with WXP and I have done follow:
    1. Installed OS using delivered recovery DVD
    2. Installed all Microsoft updates
    3. Removed all applications I do not need
    4. Installed all applications I need for work (Office, Nero and so on)
    5. Installed Norton Ghost
    6. Created my own recovery image
    Now I can reinstall my own OS and after just 30 minutes everything is there. In case of some virus or any other strange issue I have install OS again (on partition C). All saved data on partition D are still there and can be used after image installation.

  • My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?

    My iPod Classic is not detected by my Windows 8 computer when I connect it via USB port.  How can I get windows to detect this device?  A message from windows says: the device has malfunctioned.

    Try TS1363: iPod: Appears in Windows but not in iTunes.
    See also Corrupt iPod classic.
    tt2

Maybe you are looking for