I can't get X11 to start on my new install

Hello All,
I'm a recent convert from Ubuntu (surprise), and I can't get X11 to start. I have an intel i3 cpu with a intel hd graphics 3000 card. Here is my /etc/X11/xorg.conf file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "record"
Load "glx"
Load "dbe"
Load "dri2"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "DRI" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "FallbackDebug" # [<bool>]
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "Shadow" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "TripleBuffer" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "BufferCache" # [<bool>]
Identifier "Card0"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Here is my Xorg.0.log:
[ 1516.158]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 1516.159] X Protocol Version 11, Revision 0
[ 1516.159] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 1516.159] Current Operating System: Linux jerry 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
[ 1516.160] Kernel command line: root=/dev/disk/by-uuid/1b0a2fbd-cfff-4e77-803c-c167e14a04fb ro i915.modeset=0
[ 1516.160] Build Date: 05 March 2012 05:59:48AM
[ 1516.160]
[ 1516.160] Current version of pixman: 0.24.4
[ 1516.160] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1516.161] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1516.162] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 10:02:00 2012
[ 1516.163] (II) Loader magic: 0x7cef60
[ 1516.163] (II) Module ABI versions:
[ 1516.163] X.Org ANSI C Emulation: 0.4
[ 1516.163] X.Org Video Driver: 12.0
[ 1516.163] X.Org XInput driver : 16.0
[ 1516.163] X.Org Server Extension : 6.0
[ 1516.165] (--) PCI:*(0:0:2:0) 8086:0046:104d:9076 rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005050/8
[ 1516.165] List of video drivers:
[ 1516.166] intel
[ 1516.166] fbdev
[ 1516.166] (II) LoadModule: "intel"
[ 1516.167] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1516.167] (II) Module intel: vendor="X.Org Foundation"
[ 1516.167] compiled for 1.11.99.903, module version = 2.18.0
[ 1516.167] Module class: X.Org Video Driver
[ 1516.167] ABI class: X.Org Video Driver, version 12.0
[ 1516.167] (II) LoadModule: "fbdev"
[ 1516.167] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1516.168] (II) Module fbdev: vendor="X.Org Foundation"
[ 1516.168] compiled for 1.11.99.903, module version = 0.4.2
[ 1516.168] ABI class: X.Org Video Driver, version 12.0
[ 1516.168] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 1516.169] (II) FBDEV: driver for framebuffer: fbdev
[ 1516.313] (++) Using config file: "/root/xorg.conf.new"
[ 1516.313] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1516.314] (==) ServerLayout "X.org Configured"
[ 1516.314] (**) |-->Screen "Screen0" (0)
[ 1516.314] (**) | |-->Monitor "Monitor0"
[ 1516.314] (**) | |-->Device "Card0"
[ 1516.314] (**) |-->Screen "Screen1" (1)
[ 1516.314] (**) | |-->Monitor "Monitor1"
[ 1516.314] (**) | |-->Device "Card1"
[ 1516.314] (**) |-->Input Device "Mouse0"
[ 1516.314] (**) |-->Input Device "Keyboard0"
[ 1516.314] (==) Automatically adding devices
[ 1516.314] (==) Automatically enabling devices
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 1516.314] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 1516.314] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1516.314] Entry deleted from font path.
[ 1516.314] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1516.314] Entry deleted from font path.
[ 1516.314] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1516.315] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1516.315] Entry deleted from font path.
[ 1516.315] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1516.315] (**) FontPath set to:
[ 1516.315] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 1516.315] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 1516.315] (WW) Disabling Mouse0
[ 1516.315] (WW) Disabling Keyboard0
[ 1516.318] (II) Loading sub module "fbdevhw"
[ 1516.318] (II) LoadModule: "fbdevhw"
[ 1516.319] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1516.319] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1516.319] compiled for 1.12.0, module version = 0.0.2
[ 1516.319] ABI class: X.Org Video Driver, version 12.0
[ 1516.319] (EE) open /dev/fb0: No such file or directory
[ 1516.319] (WW) Falling back to old probe method for fbdev
[ 1516.319] Number of created screens does not match number of detected devices.
Configuration failed.
Here is the output of the startx command:
hostname: Unknown host
xauth: (argv):1: bad display name "/unix:0" in "list" command
xauth: (stdin):1: bad display name "/unix:0" in "add" command
X.Org X Server 1.12.0
Release Date: 2012-03-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.2.9-1-ARCH x86_64
Current Operating System: Linux jerry 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
Kernel command line: root=/dev/disk/by-uuid/1b0a2fbd-cfff-4e77-803c-c167e14a04fb ro i915.modeset=0
Build Date: 05 March 2012 05:59:48AM
Current version of pixman: 0.24.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 09:51:42 2012
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using config directory: "/etc/X11/xorg.conf.d"
Fatal server error:
no screens found
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
xauth: (argv):1: bad display name "/unix:0" in "remove" command
Here is the list of modules and daemons in /etc/c.conf
MODULES=(intel_agp i915)
DAEMONS=(hwclock syslog-ng dbus hal network netfs crond)
I've installed xorg-server and the xorg-apps group, as well as xf86-video-intel, xf86-video-fbdev, xorg-drivers, libva-driver-intel, dbus, and lib32-intel-dri.
Thanks in advance, I hope that I've provided enough information.

Thank you for the reply! I removed the log and ran startx again, giving me the same output. Here is the log:
[ 4825.297]
X.Org X Server 1.12.0
Release Date: 2012-03-04
[ 4825.298] X Protocol Version 11, Revision 0
[ 4825.298] Build Operating System: Linux 3.2.9-1-ARCH x86_64
[ 4825.298] Current Operating System: Linux jerry 3.0-ARCH #1 SMP PREEMPT Wed Aug 17 21:55:57 CEST 2011 x86_64
[ 4825.298] Kernel command line: root=/dev/disk/by-uuid/1b0a2fbd-cfff-4e77-803c-c167e14a04fb ro i915.modeset=0
[ 4825.299] Build Date: 05 March 2012 05:59:48AM
[ 4825.299]
[ 4825.299] Current version of pixman: 0.24.4
[ 4825.299] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4825.300] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4825.301] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 22 10:57:09 2012
[ 4825.301] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4825.301] (==) No Layout section. Using the first Screen section.
[ 4825.301] (==) No screen section available. Using defaults.
[ 4825.301] (**) |-->Screen "Default Screen Section" (0)
[ 4825.301] (**) | |-->Monitor "<default monitor>"
[ 4825.301] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 4825.302] (==) Automatically adding devices
[ 4825.302] (==) Automatically enabling devices
[ 4825.302] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/misc/".
[ 4825.302] Entry deleted from font path.
[ 4825.302] (Run 'mkfontdir' on "/usr/share/fonts/misc/").
[ 4825.302] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 4825.302] Entry deleted from font path.
[ 4825.302] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 4825.302] Entry deleted from font path.
[ 4825.302] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 4825.302] Entry deleted from font path.
[ 4825.302] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4825.302] Entry deleted from font path.
[ 4825.302] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4825.302] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4825.302] Entry deleted from font path.
[ 4825.302] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4825.302] (==) FontPath set to:
[ 4825.302] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4825.302] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4825.302] (II) Loader magic: 0x7cef60
[ 4825.302] (II) Module ABI versions:
[ 4825.302] X.Org ANSI C Emulation: 0.4
[ 4825.302] X.Org Video Driver: 12.0
[ 4825.302] X.Org XInput driver : 16.0
[ 4825.302] X.Org Server Extension : 6.0
[ 4825.303] (--) PCI:*(0:0:2:0) 8086:0046:104d:9076 rev 2, Mem @ 0xd0000000/4194304, 0xc0000000/268435456, I/O @ 0x00005050/8
[ 4825.303] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 4825.303] (II) LoadModule: "extmod"
[ 4825.304] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 4825.304] (II) Module extmod: vendor="X.Org Foundation"
[ 4825.304] compiled for 1.12.0, module version = 1.0.0
[ 4825.304] Module class: X.Org Server Extension
[ 4825.304] ABI class: X.Org Server Extension, version 6.0
[ 4825.304] (II) Loading extension MIT-SCREEN-SAVER
[ 4825.304] (II) Loading extension XFree86-VidModeExtension
[ 4825.304] (II) Loading extension XFree86-DGA
[ 4825.304] (II) Loading extension DPMS
[ 4825.304] (II) Loading extension XVideo
[ 4825.304] (II) Loading extension XVideo-MotionCompensation
[ 4825.304] (II) Loading extension X-Resource
[ 4825.304] (II) LoadModule: "dbe"
[ 4825.304] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 4825.304] (II) Module dbe: vendor="X.Org Foundation"
[ 4825.304] compiled for 1.12.0, module version = 1.0.0
[ 4825.304] Module class: X.Org Server Extension
[ 4825.304] ABI class: X.Org Server Extension, version 6.0
[ 4825.304] (II) Loading extension DOUBLE-BUFFER
[ 4825.304] (II) LoadModule: "glx"
[ 4825.304] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 4825.305] (II) Module glx: vendor="X.Org Foundation"
[ 4825.305] compiled for 1.12.0, module version = 1.0.0
[ 4825.305] ABI class: X.Org Server Extension, version 6.0
[ 4825.305] (==) AIGLX enabled
[ 4825.305] (II) Loading extension GLX
[ 4825.305] (II) LoadModule: "record"
[ 4825.305] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 4825.305] (II) Module record: vendor="X.Org Foundation"
[ 4825.305] compiled for 1.12.0, module version = 1.13.0
[ 4825.305] Module class: X.Org Server Extension
[ 4825.305] ABI class: X.Org Server Extension, version 6.0
[ 4825.305] (II) Loading extension RECORD
[ 4825.305] (II) LoadModule: "dri"
[ 4825.305] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 4825.305] (II) Module dri: vendor="X.Org Foundation"
[ 4825.305] compiled for 1.12.0, module version = 1.0.0
[ 4825.305] ABI class: X.Org Server Extension, version 6.0
[ 4825.305] (II) Loading extension XFree86-DRI
[ 4825.305] (II) LoadModule: "dri2"
[ 4825.305] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 4825.306] (II) Module dri2: vendor="X.Org Foundation"
[ 4825.306] compiled for 1.12.0, module version = 1.2.0
[ 4825.306] ABI class: X.Org Server Extension, version 6.0
[ 4825.306] (II) Loading extension DRI2
[ 4825.306] (==) Matched intel as autoconfigured driver 0
[ 4825.306] (==) Matched vesa as autoconfigured driver 1
[ 4825.306] (==) Matched fbdev as autoconfigured driver 2
[ 4825.306] (==) Assigned the driver to the xf86ConfigLayout
[ 4825.306] (II) LoadModule: "intel"
[ 4825.306] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 4825.306] (II) Module intel: vendor="X.Org Foundation"
[ 4825.306] compiled for 1.11.99.903, module version = 2.18.0
[ 4825.306] Module class: X.Org Video Driver
[ 4825.306] ABI class: X.Org Video Driver, version 12.0
[ 4825.306] (II) LoadModule: "vesa"
[ 4825.306] (WW) Warning, couldn't open module vesa
[ 4825.306] (II) UnloadModule: "vesa"
[ 4825.306] (II) Unloading vesa
[ 4825.307] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4825.307] (II) LoadModule: "fbdev"
[ 4825.307] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 4825.307] (II) Module fbdev: vendor="X.Org Foundation"
[ 4825.307] compiled for 1.11.99.903, module version = 0.4.2
[ 4825.307] ABI class: X.Org Video Driver, version 12.0
[ 4825.307] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 4825.307] (II) FBDEV: driver for framebuffer: fbdev
[ 4825.307] (--) using VT number 7
[ 4825.313] (II) Loading sub module "fbdevhw"
[ 4825.313] (II) LoadModule: "fbdevhw"
[ 4825.313] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 4825.313] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 4825.313] compiled for 1.12.0, module version = 0.0.2
[ 4825.313] ABI class: X.Org Video Driver, version 12.0
[ 4825.313] (EE) open /dev/fb0: No such file or directory
[ 4825.314] (WW) Falling back to old probe method for fbdev
[ 4825.314] (II) UnloadModule: "fbdev"
[ 4825.314] (II) UnloadSubModule: "fbdevhw"
[ 4825.314] (EE) Screen(s) found, but none have a usable configuration.
[ 4825.314]
Fatal server error:
[ 4825.314] no screens found
[ 4825.314]
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 4825.314] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 4825.314]
[ 4825.316] Server terminated with error (1). Closing log file.

Similar Messages

Can't get setup to start on Client 8i Install

We are still using the 8i Client. I have a new machine that I am building and when I put the disk in the setup screen never comes up. If I click set from the cd it does not come up either. To add to this I did install the 9i client first and then uninstalled. I am not sure whether their is some kind of registry issue working here. I did clean up the registry but the darn setup still will not happen.
Any help on this would be great

There is a known issue with 8i on Pentium IV. If this is the case, then you can :
1. Copy the content of the 8i Client CD on a directory on your hard disk
2. From that directory search symcjit.dll and rename all occurrences of that file
3. Run the Setup program from that directory.

[SOLVED] I can't get X to run correctly after new install

Hi all,
Over the last few days I have been trying to get Arch Linux installed on an old computer that I have. The only major hurdle that I have had so far has been getting wireless to work (no wired connection available here). I got that sorted out yesterday though with a bit of research
I haven't been so lucky getting X to run though. Following the Beginners' Guide, I have gotten up to the part where I have to configure and test X. This is what I have done so far:
Basically I have tried to use Xorg -configure to auto-create an Xorg.conf, which seemed to work (as in, the file got created and looked okay).
I then set up hotplugging with HAL, setting up everything as it says in the Beginner's guide.
When I ran the Xorg test with X -config /etc/X11/xorg.conf, I got a black screen with no mouse or anything.
I rechecked xorg.conf to make sure the driver was correct (it's set to "radeon" which seems to be right). I also checked the horizontal and vertical refresh are set correctly - which they were (autodetected correctly by Xorg -configure).
I then had a look through the Xorg page on the wiki, but nothing much there seemed to help.
I then decided to not use hotplugging with HAL, so I removed it from starting at startup and set up my xorg.conf to have the autoadddevices as false.
After that, I am having the exact same problem when I run the Xorg test (X -config /etc/X11/xorg.conf).
I really have no clues as to what to do now, does anyone have any tips for an Arch Linux n00b?
My graphics are provided onboard by an ATI RS480 (Radeon Xpress 200G Series). I am using the "radeon" driver, provided by the xf86-video-ati package. My screen is an LG FLATRON L246WH.
My relevant config files are:
xorg.conf xorg.conf
~/xinitrc doesn't exist for me.
/var/log/Xorg.0.log.old isn't able to be uploaded by wgetpaste for some reason... Using the verbose switch indicates that it's saving to /dev/null. I'll keep trying to work out how to get this file uploaded somewhere... it's quite long - 881 lines.
Last edited by NovaAesa (2009-08-09 04:16:51)

Did you miss the step to copy the skeleton .xinitrc to your home directory? Please do this. Then try starting X as a normal user, not root.
You can also try starting the Xserver without any xorg.conf file as jdiez has done. That works for many people.
To lessen your copy and paste problems, and to help you sort out the logfile, try the following two commands as a normal user in your home directory:
grep "(EE)" /var/log/Xorg.0.log > xorg_faults
grep "(WW)" /var/log/Xorg.0.log >> xorg_faults
This will locate the log lines displaying errors (EE) and then warnings (WW) and write them to the file ~/xorg_faults. Errors will be listed first. This file should be much smaller than the original Xorg.0.log.
For hot-plugging and HAL, make sure you have dbus installed.
pacman -Q dbus
If it's not there, you should install it with pacman. HAL is supposed to start dbus, but I'm a belt and suspenders person, so I list dbus then hal in my /etc/rc.conf daemons.
The wiki also has an article on Xorg that may be of help to you.
Last edited by thisoldman (2009-08-09 03:35:31)

On my Mac Pro how can I get voiceover to start reading at a specific point on a document?, on my Mac Pro how can I get voiceover to start reading at a specific point on a document?

On my Mac Pro how can I get voiceover to start reading at a specific point in a document, and then continue on to the next paragraph and so on? Thank you. Ed

Welcome to the Apple family!!!!
How can I cause the VO cursor(box) show-up/start?
Press Control-Option and F5. The F5 key is located on the top row of keys 6th key over. This is a toggling "Keyboard Shortcut" for turning VoiceOver on and off.
How can I move the VO cursor to various sentences or paragraphs of an article and have it start reading ... and perhaps even continue reading on to the next paragraph(s) ... even to the end of the article?
How to read a website with VoiceOver
Step 1: Go to the Website
A quick keyboard shortcut is Command-L. This will jump you up to the address bar. Start typing where you want to go. i.e "www.thewebsite.com"
Step 2: Working with Webpage
VoiceOver will automatically start reading the website. You can pause the speech by hitting the 'Control Button'.
If VoiceOver does not being reading the webpage, then you might have to "Interact" with it. If VoiceOver say "HTML Content" then press Control-Option-Space-Down Arrow to interact with the webpage.
Use Control-Option-Right Arrow to move throught the website. This will speak "EVERYTHING" on the page.
Most website that I've found have their articles labeled as 'Heading'. You can jump from heading to heading, by pressing Control-Option-Shift-H.
If you'd like an itemized alphabetical listing of the site, press Control-Option-I
Press Control-Option-Space on the link or article you want to view.
Step 3. Reading from Top to Bottom
Once you found and clicked on the the article/link, use the same 'Heading' command, Control-Option-Shift-H to find the title.
After finding the title, press Control-Option-A will start reading from the title on.
Note: If there are any other items (ads, pictures, etc) it will read those too.
Tip: You might be able to activate a feature called the 'Reader'. The Reader isolates the article and elimanates the ads The keyboard command is Shift-Command-R. You can also find it in the Menu Bar (Command-Option-M) under the word 'View' then 'Show Reader'.
I am using a MACPro with OSX, probably Mavericks 10.9 (where would I look to see if that is the correct information?)
You can find this information under the 'Apple menu' in the Menu Bar. To access the Menu Bar, press Control-Option-M.
Go to Apple Menu > About This Mac. This will open up another window. Use Control-Option-Right Arrow until you hear 'Version'. If you purchased it brand new from Apple within the last six month, more than likely you have Mavericks.
Recommanded Articles.
AppleVis- Commonly used Keyboard Commands
Chapter 2: Learning VoiceOver Basics
Chapter 6: Browsing the internet
Apple Accessibility Resource Page
The 'Commands Help' Voiceover Menu. Control-Option-H-H. (hit H twice) is my best friend. It's a searchable VoiceOver Menu with most of the VoiceOver command. Example: You are looking for the 'Read Current Paragraph' keyboard command. Press Control-Option-H-H and then type Paragraph. It will then bring up all the commands with the word paragraph. I believe there are three.
As from the Trackpad Commands, I've copied and pasted below from Appendix A: Commands and Gestures
VoiceOver standard gestures
If you’re using a Multi-Touch trackpad, you can use VoiceOver gestures. VoiceOver provides a set of standard gestures for navigating and interacting with items on the screen. You can’t modify this set of gestures.
NOTE:Gestures that don’t mention a specific number of fingers are single-finger gestures.
General
Enable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate clockwise
Disable the Trackpad Commander and VoiceOver gestures
VO-Two-finger rotate counterclockwise
Turn the screen curtain on or off
Three-finger triple-tap
Mute or unmute VoiceOver
Three-finger double-tap
Navigation
Force the VoiceOver cursor into a horizontal or vertical line when you drag a finger across the trackpad
Hold down the Shift key and drag a finger horizontally or vertically
Move the VoiceOver cursor to the next item
Flick right
Move the VoiceOver cursor to the previous item
Flick left
Move content or the scroll bar (depending on the Trackpad Commander setting)
Three-finger flick in any direction
Go to the Dock
This gesture moves the VoiceOver cursor to the Dock wherever it’s positioned on the screen
Two-finger double-tap near the bottom of the trackpad
Go to the menu bar
Two-finger double-tap near the top of the trackpad
Open the Application Chooser
Two-finger double-tap on the left side of the trackpad
Open the Window Chooser
Two-finger double-tap on the right side of the trackpad
Jump to another area of the current application
Press Control while touching a finger on the trackpad
Interaction
Speak the item in the VoiceOver cursor or, if there isn’t an item, play a sound effect to indicate a blank area
Touch (includes tap or dragging)
Select an item
Double-tap anywhere on the trackpad
You can also split-tap (touch one finger and then tap with a second finger on the trackpad)
Start interacting with the item in the VoiceOver cursor
Two-finger flick right
Stop interacting with the item in the VoiceOver cursor
Two-finger flick left
Scroll one page up or down
Three-finger flick up or down
Escape (close a menu without making a selection)
Two-finger scrub back and forth
Increase or decrease the value of a slider, splitter, stepper, or other control
Flick up (increase) or flick down (decrease)
Text
Read the current page, starting at the top
Two-finger flick up
Read from the VoiceOver cursor to the end of the current page
Two-finger flick down
Pause or resume speaking
Two-finger tap
Describe what’s in the VoiceOver cursor
Three-finger tap
Change how VoiceOver reads text (by word, line, sentence, or paragraph)
Press the Command key while touching a finger on the trackpad
Rotor
Change the rotor settings
Two-finger rotate
Move to the previous item based on the rotor setting
Flick up
Move to the next item based on the rotor setting
Flick down
To customize other gestures by assigning VoiceOver commands to them, use the Trackpad Commander.
Assigning VoiceOver commands to gestures
If you need a reminder about what a gesture does, press VO-K to start keyboard help, and then use the gesture on the trackpad and listen to the description.
Learning about keys, keyboard shortcuts, and gestures
Sorry lots of information. Enjoy. You

Can't get WRT54G to start up, gets stuck at "checking computer settings"

Can't get WRT54G to start up, gets stuck at "checking computer settings" at 99% Please help!
If I hit the escape key it will go to the password screen, it looks like the password is already entered for me so I hit enter, but then it just goes back to "checking computer settings" and won't go past 99% again.'
Sorry but the last post mistakenly said the wrong number so I posted this.

If you are running the install CD that came with the router, the behavior you describe is exactly what happened when I tried using the CD today. The CD didn't seem to work with my computer's fixed IP address (not in the 192.168.1.0 network.)
What worked for me was to set my computer to have the fixed IP address 192.168.1.2. Then I was able to contact the router using its web interface at 192.168.1.1 amd make the necessary settings.
The password had NOT been changed from the default despite the install CD software seemingly accepting a new password. The default password worked.
Paul

Can't get X11 to load, hard crashes with Geforce 8200M

I can't get Xwindows to load on a new laptop I recently got. Ubuntu Live 64bit works fine, even can install the NVIDIA drivers and get 3D support on it (tested this before I purchased the laptop). So in Arch Linux (64bit) I downloaded the main NVIDIA driver package, module loads fine. When I try to start Xwindows, I get a "bus error" as regular user. When I try root, my machine crashes hard (can't even toggle CAPS lock). I can't even load Xwindows with the VESA driver, it complains about MTRR not matching correctly.
Specs on the machine can be found here: http://h10025.www1.hp.com/ewfrf/wc/docu … ct=3860070
Any help would be greatly appreciated. I also tried the 190 beta drivers, same problems occur. I can get any log files if needed later, I don't have immediate access to the machine.
Thank you in advance,

scriptmunkee wrote:Not sure if my issue is the same as yours, but I updated to night and had version 185.18.31-1 installed with kernel 2.6.30.4-1. That combination didn't allow Xorg to start properly. I don't get an error at all. I get a failure or a halt when the Nvidia driver attempts to replace the ACPI hotkey events
Are you able to load it properly using vesa of nv drivers? I can't seem to get mine to load with any driver- it always crashes hard.

HT4859 Can I get back to start up assistant after I have set up phone originally

can I get back to start up assistant after Iphone 4 S set up in shop yesterday? Have notes backed up in icloud from old phone and don't know how to get them onto new phone?

Welcome to the Apple community.
In order to return to set up assistant, you will need to restore the phone again.

HT4528 I can't get siri to start when holding down home button?

I can't get siri to start when holding down the home button?

Also, if you want to be able to activate Siri when the iPhone is locked, set Settings > General > Passcode > Siri ON.

Can't get email to start on new iphone 4s

Can't get email to start on new iphone 4s - stuck on the 'Welcome to Mail' screen, when I click on Google and enter my account details, then Next, it tells me 'This Gmail account has already been added to your iPhone.' Similarly for icloud. But that's all it lets me do. Help please

Instead I went to Settings>Mail,Contacts,Calendars...tapped the Gmail account and found that the Mail button was switched off. Duh.
Thanks for your help randers4

I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP!

I can't get Firefox to start. It says that Firefox is already running after re-install and re-start it again. I have deleted all profiles, but no luck. HELP! edit

-> [[Firefox is already running but is not responding]]
-> Profile in use
* http://kb.mozillazine.org/Profile_in_use
Check and tell if its working.

Can't get Firefox to start after performing OS security updates

Just did the most recent updates on OS-X 10.6.8, and now I can't get Firefox to start. It comes up and says that it is having problems (the "embarassing" window) and that I should try closing tabs. However, it's not responding at all, so finally I have to resort to force quit. I've try cold starting the computer with no effect.

Let's try this. You said you are trying to start Firefox 8 on the problem machine? Can you try downloading Firefox 11 from [http://www.getfirefox.com www.getfirefox.com], install that, restart your computer, then see if it still acts up?
If it does, try running Firefox in [[Safe mode|Safe mode]].

I use Windows 7 and can't get itunes to start due to msvcr80.dll missing.

I use Windows 7 and can't get itunes to start due to msvcr80.dll missing. I downloaded and installed latest version of itures and can't get it to start. Any suggestions?

Hi, I followed others yesterday with the same problem and removed all Apple Inc programs, rebooted and reloaded iTunes appears to of sorted this issue but as others have found OUTLOOK now takes ages to load and open ??

I can't get itunes to start now that I downloaded 10.5.3

i can't get itunes to start now that I downloaded 10.5.3

Try following steps and test one at a time:
1. Restart computer, right mouse click iTunes icon and select "Run As Administrator"
2. If that does not work, check to see if this file APSDaemon.exe is the problem here.
Close your iTunes.
Press Ctrl-Alt-Del key and choose Task Manager. In the "Processes" Tab, select the file APSDaemon.exe and click End Prosses button, then close the task manager window.
Now open itunes and see if it is working?
If that works, to prevent having to do the same process everytime you restart Windows, go to. START button, type in
MSCONFIG
Hit ENTER
Click STARTUP Tab, Uncheck "Apple Push", click OK.
Restart Windows.
3. If that fails or you don't see ApsDaemon.exe in the Processes, refer to following article to remove SC files:
http://support.apple.com/kb/TS2363
4. If that fails, repair or reinstall your Quicktime. START / CONTROL PANEL / PROGRAMS N FEATURES / hightlight QUICKTIME and click REPAIR.

Can not get adobe to start up

can not get adobe to start

I'm still not closer to understanding what you actualyl mean, but on teh chance that this is referring to Flash player, you may wanan have a look at this:
Flash Player Help | Installation problems | Mac OS
Mylenium

Updated iphone 4 to iOS 6 but I can't get Siri to start by holding down the home key... Am I missing something? I thought Siri is included in iOS 6!

I Updated my iphone 4 to iOS 6 but I can't get Siri to start by holding down the home key... Am I missing something? I thought Siri is included in iOS 6!

Siri is available on iPhone 4S, iPhone 5, iPad (3rd generation), and iPod touch (5th generation) and requires Internet access. Cellular data charges may apply.

I can't get X11 to start on my new install

Similar Messages

Maybe you are looking for