I can't have the new update 5.0.1 on my ipod touch 2nd generation how do i need to doe it ??
I can't have the new update 5.0.1. How i will get it ??
If you have a 3G or 4G iPod, install iTunes 10.5.3 on the computer and connect the iPod to the computer and go to the Summary pane for the iPod in iTunes and click on update/chack for update.
Also see:
iTunes: Backing up, updating, and restoring your iPhone, iPad, or iPod touch software
A 2G iPod only got so 4.2.1
A 1G to 3.1.3
Similar Messages
-
I'm so confused. I've been all over the support site and I've uninstalled and reinstalled iTunes at least 3 times. My iPod just has the sign it has when it's turning on, but nothing else is happening. All I was trying to do was download the new software, and now it's completely crashed. Does anyone know why???? Does someone have a solution???? PLEASE HELP!!!!!! D:
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on anoterh computer to help determine if you have an iPod or computer problem.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
Help please!!!!
Placing your device into recovery (DFU-Device Firmware Upgrade) mode:
Follow these steps to place your iOS device into recovery mode. If your iOS device is already in recovery mode, you can proceed immediately to step 6.
1. Disconnect the USB cable from the iPhone, iPad, or iPod touch, but leave the
other end of the cable connected to your computer's USB port.
2. Turn off the device: Press and hold the Sleep/Wake button for a few seconds
until the red slider appears, then slide the slider. Wait for the device to turn off.
* If you cannot turn off the device using the slider, press and hold the
Sleep/Wake and Home buttons at the same time. When the device turns off,
release the Sleep/Wake and Home buttons.
3. While pressing and holding the Home button, reconnect the USB cable to the
device. The device should turn on. Note: If you see the battery charge warning,
let the device charge for at least ten minutes to ensure that the battery has some
charge, and then start with step 2 again.
4. Continue holding the Home button until you see the "Connect to iTunes" screen.
When this screen appears you can release the Home button:
5. If necessary, open iTunes. You should see the following "recovery mode" alert:
6. Use iTunes to restore the device.
If you don't see the "Connect to iTunes" screen, try these steps again. If you see the "Connect to iTunes" screen but the device does not appear in iTunes, see this article and its related links.
Additional Information:
If you have a problem getting into recovery mode then try: RecBoot: Easy Way to Put iPhone into Recovery Mode.
Note: When using recovery mode, you can only restore the device. All user content on the device will be erased, but if you had previously synced with iTunes on this computer, you can restore from a previous backup. See this article for more information. -
I can not dowload the new updated software for my Ipod touch 4G. When i do I get an error message that says Network connection has timed out. I have done the trouble shooting steps. Downloaded the latest version of Itunes, and checked network connection
Disabling the computer's antivirus and firewall during the download and update usually resolves the timeout error.
-
i have just updated to the latest ios 5 and have lost apps and their data, can i reverse the new update to get back what i had on my ipad?
There is no need to do that, I had the same problem pal! Just do this and all should be fine!
Delete one of the app's and re-install it, then for some reason everythign is restored to as it was!
Hope you get on fine, let me know!
Thanks
Dan -
I have an Ipod Touch 2nd generation. I bought a Itunes card and when I went to add game apps(like Temple Run) to my Ipod it said I couldn't.Is there a way to upgrade this ipod without having to buy a new one to be able to play the games?
You can update it to 4.2.1
Open itunes, connect ipod. If there is an update available, then it will prompt you to update. -
I can't find the new update! I know how to do it, but it tells me that my software is up to date!
* I don't have a jailbreak and my software version is 6.1.3How are you trying to update, direct on your iPad via Settings > General > Software Update, or via your computer's iTunes ? If via your computer then you will need iTunes 11.1 installed : http://www.apple.com/itunes/download/
-
When can we see the new updates coming to the cc
when can we access The New updates that were announced before NAB 2015 ? like the Morph Cut and the Colour correction updates from Lumetrie?
Hi there,
Updates which were announced in NAB 2015 are "coming soon"
Read more here - http://blogs.adobe.com/creativecloud/coming-next-to-adobe-pro-video-tools/?scid=social4315 6416&adbid=881757421867592&adbpl=fb&adbpr=341657335877606
^Ani -
I can't get the iMessage or FaceTime to work on my iPod touch. I updated to the latest iOS. I have ensured restrictions are off and 'Set Automatically' is selected under date & time settings. I can enter my apple ID, but it bounces back to the first login screen.
I just hit the home key very fast 3 times and it worked. Glad to see that someone suggested this to another person with a mini. My gremlins are all gone. Yea to the forum .......Marci 73361
-
Can I update my iPod touch 2nd generation with iOS 4.2.1 to restore the iOS to a new and improved iOS? Can I go from iOS 4.2.1 too iOS 5.0.
All you can do is get a newer model iPod. The 2G can only go as high as 4.2.1. Its hardare does not support a higher iOS version
-
I can not download the new updates on my iphone 4
i can not download the new updates on my iphone. it hasnt been upgraded since in got it
sync your phone to itunes and update the software that way. Before you update make sure you BACK UP your phone!! http://support.apple.com/kb/HT1766
-
I can not get the new updates because my start disc and hard drive are full, I need 1.98 GB.
Some folks recommend OmniDiskSweaper to allow you to review your stuff to find possible candidates to throw away.
Even if you throw away some stuff and your desired "1.98GB", then what? If that's the number you need for the update, you'll just use most or all of the reclaimed space with the update and you are right back to where you started.
You don't specify what kind of machine you got but presumably it's a mac pro since you posted in the Mac Pro community. In which case just get yourself another drive or two and move stuff around to free up your boot drive.
[Perhaps you should hurry too since I expect hdd prices might be going up due to possible impending hdd shortages.]
Finally, if some of those updates are major system updates you want extra drives for backups because I always recommend you never do major updates to your system without backups to that system. -
Can I have the new ipad be installed in Chinese operation system? It's a gift for my Chinese friend, who's not good at English.
Chinese comes pre-installed. There's nothing special that needs to be done.
-
Hi, I've been given an Ipod Touch 2nd Generation for Christmas and want to download a few games but the ones I want say I need to update software to ios 4.3. Is this possible to do on this ipod?
No, a 2nd Gen iPod can only go up to iOS4.2.1
-
I have an Ipod touch 2nd generation with version 4.2.1 IOs and it is no longer recognized as a device when I plug into my computer. This means I can not change synch settings - any ideas on what I need to do ?
See:
iOS: Device not recognized in iTunes for Windows
I would start with:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
or
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Maybe you are looking for
-
DMS Document Management from SAP LSO and IT1062
Hi Experts I need to use the Knowledge Link Infotype (IT 1062) for linking to documents in the DMS for use from within SAP LSO. I can upload the documents using Tx OAOR, but how do I add the link to the document in IT 1062? Is there another way of up
-
Can not install the latest itunes on Windows 7 x64
I have recently purchased an Ipad and need to download itunes onto my computer. Its a windows 7 64 bit operating system that was already installed upon the purchase of the computer. I have downloaded the most recent itunes program from their site an
-
How to send a XML document using HTTPurlconnection as a post
Dear Guru's , I am trying ot send a xml document to a httpserver using httpurl connection .. It works fine locally ..but over the net it is throwning an exception ..java.io.interupted exception .. any ideas .. please send me the code if possible Than
-
Maximum size of an swf file of an Application
Hi , Ours is a Intra Net Application would be launched as a Product ,and can be used with in an Organisation . The Project would be developed using FLEX 3 as Front End , blazeds in Tomcat , JDBC with Oracle for backend . Please tell me what should
-
Which patch parameters "reset to saved value" on changes and which don't?
Despite having the preferences patch set to "reset to saved" AND all screen control inspector attributes set to "preference", AND updating to 2.0.1, I can't make sense out of why some parameters reset to "as-saved" and some don't when changing patche