I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up
I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up, I can't hear any sound from my macbook. It's not on mute and the volume is turned all the way up. Any ideas?
Go step by step and test.
1. System Preference > Sound > Output > Internal Speakers
Highlight Internal Speakers.
Make sure that Mute is not enabled.
2.Plug in and remove the headphone.
If you see red light in the headphone port, plug the headphone
in and out of the port 5 or 6 times to flip the microswitch inside.
Sound output may be stuck in the digital mode.
3. Reset PRAM. http://support.apple.com/kb/PH4405
4. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
5. Applications > Utilities > Audio MIDI Setup
Audio Devices window
Side Bar
Click the Built-in Output.
Under Mute any of the boxes checked? If so, uncheck it.
Similar Messages
-
When I phone people can hear me without any problem, but I hear very very bad. The sounds is metallic and it is very difficult to understand. Have anyone idea of what is it about. I guess is not a software problem but I am not an expert. Thanks in advance
Make sure that you allow pages to choose their colors and that you haven't enabled High Contrast in the Accessibility settings.
*Firefox > Preferences > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
*https://support.mozilla.org/kb/Images+or+animations+do+not+show -
My IPhone's volume is not working. I have checked and tried everything. When I use my headset I can hear when phone rings or receive text msg when I pull the jack out I have no sound on anything
I had this problem with my 4s a couple of times when I'd taken the headphones out and it hasn't registered it. My solution was easy, all I had to do was turn the phone off and then on again.
Although I'm sure you've already tried this its a sometimes forgotten and very easy solution to a lot of problems. I hope you find out what's wrong. -
When I press the + and - buttons, the volume icon appears, but the slider is empty. When I receive a call, I hear it ring, and I can hear the ringtones in the sound menu. However, the message/mail notifications don't make any noise, and I can't hear the sound menu.
- During a phone call, if I put the conversation on speakers ==> it works and the volume bar reappears. I can control the volume with + and - buttons. But when the conversation is over, the bar disappears again.
- With the headphones, everything is ok!
- I also noticed (only a few times) that when I do a silent to ringer mode, the volume slider reappears and works correctly during 2 or 3 seconds, before disappearing again.
I don't know what is problem,because the speakers work.Hello jam5064,
We've an article which provides tips that can help get your iPhone working correctly.
iPhone: No sound or distorted sound from speaker
http://support.apple.com/kb/TS5180
Cheers,
Allen -
Hi I followed instructions to copy/move iTunes music to a new PC. I can see albums listed in the library but SYNCH will not put any music on my new iPod.
It took three weeks to import my CDs on the old PC and I don't want to do it again!
Can anyone help ?Take a look here; it should help:
iTunes for Mac: How to copy purchases between authorized computers
Though it refers to items purchased from the iTunes Store, it applies to all your iTunes content. And if you happen to also own an iPod:
How to use your iPod to move your music to a new computer
Once you have the tracks on some removable medium, you can mount that on your new computer and then just drag the content to the iTunes window. Make sure that the option to "copy files to iTunes Music folder when adding to library" is set in the iTunes -> Advanced -> General preferences before you do. Alternatively, you can use the Add To Library command and select each track (or folder of tracks).
If you won't be using that Windows system once you move the content, don't forget to deauthorize the system from your iTunes Store account before you dispose of the computer.
Regards.
Message was edited by: Dave Sawyer -
I was forced to switch from my original computer to a new one and majority of my iTunes were switched over but my audiobooks did not. Is there any way that I can retrieve them again. If I go to attempt to rebuy it, then it says thhat I technically already bought it but it won't download.
Audiobooks are not available for redownloading, so you need to transfer them from your old computer, or get them from your backup. How did you copy your iTunes contact from your old computer to our new one?
Regards. -
I have an Intel iMac running OSX 10.6.8. I would like to use Final Cut Pro 10.1. I know I need OSX 10.9 for this. Can I run both 10.6.8 and 10.9 on the iMac ? I do not want to convert completely to 10.9 because of my existing software. Thanks for any help
It would depend on how old your IMac is, how mush memory you have, it it can be upgraded by OWC, etc. I have a 2006 Macbook Pro and would NOT put Mavericks on it or espeacially FCP 10.1.1 on it because the most memory it can have is 4 GB. You need at least 8 GB to work with Final Cut Pro 10.1.1. IMHO.
I would try to find a copy of Final Cut Express perhaps.
Does this answer your question? -
all data and messaging works on my note 4, but last night the cellular phone service just went dead. I can call people but the line is just silent, and people can call me, it rings, but I can't hear them. ????? What is wrong with it???? How do I fix it????
You aren't attached to a bluetooth headset or other device for some strange reason? Or even an automobile bluetooth, I have a friend that has this issue with his Prius because even when it is not running the bluetooth is still active and connects to his phone.
-
My HD TV has two HDMI inputs which are being used by a home theater system and my RCN cable box. i want to be able to use my appleTV as well as those but do not have another HDMI input. How can i connect it so that i can use any 1 of the 3 at any time?
Get an HDMI switcher. Plug in the ATV directly to the TV and then use the switcher on the other input.
Example
http://www.amazon.com/Ultra-High-Performance-Switcher-Switch/dp/B0015YWKYY/ref=s r_1_1?ie=UTF8&qid=1316918064&sr=8-1 -
hello guys ..when i try to update any applecation..it puts the first user a ccount and it ask the password which i dont know it cause im not the first user of this i pad ,,,,so how can i changebit to update apps dute to my account name and password???
please answer meDelete all apps that were purchased with the former ID and renown load or purchase them with your ID.
-
Why my iPhone 5 is not ringing even I already set the tones in the settings.. Even receiving text message I can't hear any text tone.. Please help
Are you sure that the button on the side of the iPhone is not on mute
-
I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.
I am having sound issues with the website Pottermore while using Safari 6.1. I once muted the sound and now can't unmute it even though the icon tells me it's unmuted. I can hear samples of audio books in the store section. Any ideas? I have reset Safari. Website works fine on Firefox.
-
I imported photos from an old iPhoto (2001) to photo library and can now see them only as thumbnails but not when I click on them. The screen is black cannot see or print either. Is there any way to salvage those old photos? I now use iLife09. OS 10.6
Did you import the old iPhoto library into the new one? That's not what you want to do because you will import all of the original, modified and thumbnail files as if they were original files. Lots of duplicates and useless small photos.
Do you have a backup copy of the library that you imported into to? If you do then bring it in and then use iPhoto Library Manager to merge the two libraries into a new, 3rd library.
If you don't then you'll have to try to fix the current one and then cull out the duplicates and small useless photos as follows: make a temporary, duplicate copy of your library and apply the three fixes in order as necessary.
Fix #1
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your HD/User/Home()/ Library/Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your HD/User/Home()/Library /Caches/com.apple.iPhoto folder.
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
Fix #2
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #3
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If this doesn't fix the problem you'll have to start over from scratch and create a new library from the files inside the Originals folder of your current library. But first you should cull out the small photos that would be the thumbnails from the 2001 library.
Move the Originals folder to the Desktop, open and do a search for Kind=photo, File size is less than 10 KB. That should find all of the thumbnail files which you can then drag to the Trash. You might have to make that less than 50 KB. Then Import the remaining photos into a new iPhoto library.
OT -
i made music purchases in indian store from 6months and now i see all my music purchases are removed from my purchases and i am not able to find them any more except few recent purchases.. i invested lot of money now i see all are lost.. what can i do?
Have you failed to maintain a backup copy of your content?
-
My elderly mother has EXTREMELY limited vision and is a technophobe. I am considering an iPhone with Siri. Can I turn off everything else so she can use only the phone app and voice dialing or Siri and not accidentally open any other app and screw something up.
I'm asking, in all seriousness, why do you think your mother needs an iPhone? Honestly, if your mother is, as you described her, a technophobe, I would recommend against getting an iPhone or any other smartphone. I've spent a fair bit of time teaching older folks to use smartphones. If they are interested in learning, it's fine. If they have the phone because their kids or grandkids thought it was a good idea but they are afraid of the phone or not interested in its features, it doesn't go well at all.
Many basic phones have voice dialing. Obviously, it doesn't do all the things Siri does but it may be much less intimidating for your mom. Also, basic phones have hardware keys. Even someone with limited vision can learn the keyboard on such a phone. From the sound of your first post, all she will be doing is making phone calls.
Best of luck.
Maybe you are looking for
-
I want to make a file to be downloadable on my webpage. I have developed a simple lindk to the file. But internet explorer opens that file and don't show option to save it on hard disk. If any can mail me some Servlet solution or applet ( preferably
-
Exclude the value 0 records in the pivot view obiee 10g
HI, I have a requirement.,i have report circuit and outage time by month in a pivot view.If one circuit have a '0' outage time in all months then i want to exclude the record from the display.Is there anyway to display the data like this.... thanks,
-
Weblogic Domain not getting created in SOA Suite 11g R2
I have installed the components of SOA Suite 11g R2 (11.1.1.3) on a single Windows XP SP3 machine (32 bit) following recommended procedures. I tried to configure Weblogic server using Domain Configuration utility. After navigating hrough the wizard,
-
I'm trying to do the AMFPHP tutorial in the Labs wiki and am running into errors. Any ideas what is happening? Here's the tutorial Link to Wiki I'm getting an error on this line: public var gateway : RemotingConnection; And the error is: Type was not
-
Error 0xBFF6001F using JAI CV-M50 camera
Hi , I am getting an error 0xBFF6001F and cannot frame grab from my camera JAI CV M-50. I have seen some forums where configuring the camera is mentioned but when I get into MAX and NI-IMAQ devices img0 IMAQ PCI 1409 and then channels, I cannot