I can't hear anything but other can hear me

When I call some1 I can't hear anything but the other person can hear me

Hello Nuzkhan,
The following article provides some useful troubleshooting steps that can help get your iPhone's receiver working again.
iPhone: Receiver and call audio quality issues
http://support.apple.com/kb/TS5196
Cheers,
Allen

Similar Messages

  • Blackerry Curve 8330---I cant hear anything, but they can hear me??!!

    I recently bought a Blackberry Curve 8330, Verizon. In the first couple of days, I started having problems where I would go to make a call and wouldnt hear anything....however, the other person on the other line tells me later they heard me. In order to fix this, I have to take out my battery and put it back in. Apparently, I know two other people that this has happened to on several occasions---as for myself, Ive had my blackbery for a month and had this happen at least 4x and its starting to get annoying.
    Any advice on what to do?! Return product?
    Thanks

    This type of issues arises due hardware melfunction. Contact your carrier for support or else you can take help from RIM support if available.
    tanzim                                                                                  
    If your query is resolved then please click on “Accept as Solution”
    Click on the LIKE on the bottom right if the post deserves credit

  • I have placed adsense ads on my blog, I can't see them but others can

    I run a small blog for my local writers group, I use wordpress and all my work is carried out via Firefox. The site is supported by adding Adsense. ads.
    Today all the ads disappeared from my computer. I've check with a friend and they are showing up on his computer. I'm guessing that somewhere along the line I adding a blocking script but I can't figure out where. Any body got ideas?
    The website in question is http://www.abcwritersnetwork.co.uk

    Read https://discussions.apple.com/thread/5327557?tstart=0

  • No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help? Thanks

    No sound for incoming calls but it works using speaker and earpiece. I can't hear anything but the other party can hear me clearly. I was told it's hardware problem. Would anyone please help me? Thanks

    This is an annoying problem for many people. Most likely your dock connector (on the bottom where you plug in your phone) is dirty or screwed up and is probably just coincidence that it happened after you updated. Some people have had success cleaning the port with a dry clean tooth brush. There is a long discussion going on at the thread I linked below. Good luck...
    https://discussions.apple.com/thread/2475631

  • IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black

    IPhone black screen does not show anything, but I can hear that the device works. I hear the lock open the screen and hear the iPod but the screen remains black!!

    It's happened to me before as well. Try holding both lock(top right) and home buttons simultaneously until u see a slight flash of wight then just reboot it normally. If that doesn't work try restoring your device from itunes

  • When I make a call, I can't hear anything but my correspondants can hear me. Can anyone help?

    When I make a call, I reach my corresponddents (who can hear me) but I can't hear anything. Can anyone help?

    I would first try contacting your carrier, see if its something with their network. If thats all good then you can try restarting, resetting, and even restoring your phone to see if that helps.
    If all else fails then I would recommend going in to an Apple Store to see if this could be a potential hardware issue with your phone.

  • Having upgraded iOS7 on both my iPad and iPhone yesterday, I am now not able to use my FaceTime on either device. I seem to get through and the other party can hear me but I can see nor hear nothing.

    Having upgraded iOS7 on both my iPad and iPhone yesterday, I am now not able to use my FaceTime on either device. I seem to get through and the other party can hear me but I can see nor hear nothing.

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime: Set-up, Use, and Troubleshooting Problems
    http://tinyurl.com/32drz3d
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
     Cheers, Tom

  • When I connect via face time with my friend's ipad or iphone we can see each other and I can hear them but they can't hear me.  HELP!

    When I connect from my mac via facetime with my friend's iphone or ipad we can see each other and I can hear them but they can't hear me.  The mute is not applied, and the microphone seems to work with other applications.  Help!

    I have same issue in my MB Air with Snow Leopard.   It used to work fine but one day I found that the mic mute was locked on.   I went to System and ensured mic was working by seeing the bars move.   I went to Facetime > Video drop down and it is all greyed out so not active and the mic symbol in Facetime pane has a line through it (muted) and is dead.    I have tried everythinng to UNmute the mic.   Two way video is fine and I can hear the other party perfectly.    Seems like this happened about the time of a Snow Leopard update but may be wrong.    Issue is several months old and, well, getting old!    I love Facetime with my grandkids etc. who all use Apple stuff.    There HAS to be a way to reactivate the mic in my MB Air.    Could someone please help??

  • WHEN USING FACETIME, THE OTHER PERSON CAN SEE AND HEAR ME BUT I CANT HEAR THEM AND THEIR VIDEO IS A STILL PICTURES.. DOES ANYONE HAVE ANY ANSWERS???

    When using Facetime.. the other person can see and hear me, but I can't hear or see them.. Does anyone have any solutions?? The only thing I can see is a still picture of them

    Hi mduggan,
    Thanks for visiting Apple Support Communities.
    If the other person can't see you during a FaceTime call, first use the Camera app on the iPhone to make sure the camera is working properly. If you don't see an image when using the Camera app, try these troubleshooting steps first:
    If the screen shows a closed lens or black image, force quit the Camera app.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    You can find these steps and more information here:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    If the camera is working normally, next troubleshoot FaceTime using the steps in this article:
    iOS: Troubleshooting FaceTime
    http://support.apple.com/kb/ts3367
    All the best,
    Jeremy

  • When I'm on facetime the other person cant hear me but I can hear them. Why is this?

    when I'm on facetime the other person cant hear me but I can hear them. Why is this?

    Make sure youe volume is turned up and your microphone isn't muted.
     Jackson

  • My microphone works but other can't hear me on calls ?

    my microphone works but other can't hear me on calls?

    Hey sssaaarrraaa,
    Welcome to the Apple Support Communities. If you are having issues with your microphone on your iPhone, then the following article will assist with troubleshooting and isolating the issue for you.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Regards,
    -Norm G.

  • HT1688 Voice is not working.  I can hear, but others cannot hear me

    My voice has slowly deteriorated.  Now, I can hear callers, but they can't hear me.  Any suggestions? 

    Cover the secondary microphones wherever they are in that phone (next to the earpiece?) if that phone has noise reduction feature.
    Check my other posts about iphone 5 considering your voice as noise when the phone is not STUCK to your ear, because your voice is received through BOTH microphones (yes, Apple dictated that if you want to move the phone away your ear just 2 inches (lots of times), you should push the "speaker" button to prevent the noise reduction muting your own voice, rather than just manually activating it the few times you actually want to speak from a noisy place)

  • Can't get sound from phone recipient can hear me but I can't hear them. Works on speakerphone ok.

    Can you tell me what is wrong with my phone. I answer but can't hear anything. Recipient can hear me. If I use speakerphone I am ok? All games etc have sound????

    Do you hear the Audio tracks and only Software Instruments are not working od don't you get any output at all? I was just assuming that through the update your Apogee has been removed as your Audio device in Preferences->Audio->devices.

  • Very strange problem I cant hear anyone but I can ...

    This afternoon I started to get phone calls where no one was on the line.
    After this happened several times I tried to ring out. I did get dial tone and the first couple of times I did get busy tone and I think ring tone once. I couldn't hear anything after that and I assume they answered but I couldn't hear them.
    Since then I don't get any busy or ring tone at all but still get Dial tone !
     suspecting my Gigaset digital phone I tried another one (we have four on the system) but all of them were the same.
         So I tried a normal plug in type phone but that was the same. I only have 1 socket so I had unplugged the Gigaset.
    I tested it by ringing my mobile. This rang and my wife answered it but I couldn't hear her but she could hear me.
         I then tried using the socket inside the master socket for a final test even though I have no other internal wiring but the problem persisted.
         I have tried to report the problem but I can only book a visit from the engineer 6 days from now!
    I can't see how it can be a problem in my house. I did the line test on the web and that said the line is OK and I think it must be as I can still get broadband as well.
    I can only think it is an exchange fault but it seems I must wait till next week to explain the actual problem.
    Has anyone got any idea what I can do or what might be the problem please.
    I am a pensioner and can't afford to use my mobile all week at 35p a minute ;(
    thanks
    Mike

    It sounds like an external problem and is as far as your are concerned since you can't do more than connect to the test socket. Could be an insulation problem somewhere between your socket and the exchange, lots of joints in the wires between these locations. With the low insulation it's in effect making another circuit on your line other than with your phone so when you hang up this other circuit stays connected for a while. It can also make your phone ring when no one is calling. If you have an engineer appointment you'll just have to wait, they'll be busier after the heavy rain and lightening, if you've just been told you'll be fix by that date hold a little hope it may be sooner, they do work weekends!

  • HT2188 I can hear caller but they can not hear me except when using speaker phone

    I can hear caller but they can not hear me except when using speaker phone

    First of all,  make sure that your iPhone as the most recent iOS available. Check in "Settings>General>Software Update".
    One other problem could be your microphone. Does it work for anything else other than a call?
    Good-Luck!
    kpower28
    Please mark this as "solved my problem" or "helped me"!

Maybe you are looking for

  • Disk is locked and cannot be written to???

    Just bought a brand new, second gen 8gb ipod nano. Newest iTunes and newest software on ipod. When i connect the ipod it comes up fine in iTunes, but if i try and alter settings in ipod summary and click apply, or copy music across i get the followin

  • Need help exporting in cs4

           I am looking into a film major, or a television and brodcast major. i biught a sony XR150 to film some stuff for portfolio (short films. I work at a TV station near me, so i can use the stuff i produced also.) for some reason, i am having a MA

  • FCH6-allow user to chng.check info for manual check-n not for auto chekf110

    Hi Gurus.... T'Code FCH6 will allow user to change check info if the check is created manually. But it will not allow check info to be changed if the check is generated from F110. Is there  any mean to protect check info from being changed no matter

  • Write results to report file once per minute

    Hello All, If I understand correctly, the standard setup for report creation is to save all results to the report at the end of the test. I am running a Teststand script over several days, there is a chance power could be lost or the machine could fa

  • Edit live rules in Oracle 11g SOA Suite

    Is it possible to edit live rules in the 11g SOA suite stack? I am looking for the same functionality that was delivered via the ruleauthor web site in the 10g stack. Additionally is it possible to publish rule sets into an environment without buildi