I can't hear one of the channels on my ipod--what should I do?

One of the channels on my iPod isn't working. I can hear it when I wiggle the headphone jack in the input, but it doesn't last. I have AppleCare. Should I take it into my local Apple store? Devin
dell   Windows XP  

Well, it may be your actual set of headphones/ear buds that are the issue here. Have you tried another pair of good headphones to see if the issue is resolved when you try them?
If you know that it's the iPod itself, then yes, I would suggest taking your iPod into your local Apple store if the iPod is still under warranty.
-Kylene

Similar Messages

  • HT203167 I was downloading an album off of iTunes and it did not download one of the songs for some reason what should I do?

    I was downloading an album off of iTunes and it did not download one of the songs for some reason what should I do?

    Does the Store > Check For Available Downloads menu option find it ? If not, then depending upon what country that you are in (music can't be re-downloaded in all countries), does it show under the Purchased link under Quicklinks on the right-hand side of the iTunes store home page on your computer's iTunes for downloading (if there is an complete download of the track listed in the Music part of your library then you will need to delete it from there before it will get the cloud symbol in Purchased for redownloading) ?
    If you can't download it via either of the above then try the 'report a problem' page to contact iTunes Support : http://reportaproblem.apple.com
    If the 'report a problem' link doesn't work then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • Ask your question.updated to IOS 6.1.  I cannot configure my iMessage properly with this version.  Everytime it verifies the email addresses associated with my apple Id the page reverts back to the previous one with the sign in portion.  What should I do?

    Please assist with the iMessage configuration.  My iMessage used to work with the previous version.  With 6.1 I cannot configure iMessage properly.    After I sign in using my apple id.  It directs me to the next page with all the email add associated with the I. d. After confirming the email addresses it verifies then reverts back to the previous page with the sign in portion.  What should I do?

    Using FaceTime http://support.apple.com/kb/ht4319
    Troubleshooting FaceTime http://support.apple.com/kb/TS3367
    The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
    http://tinyurl.com/a7odey8
    Troubleshooting FaceTime and iMessage activation
    http://support.apple.com/kb/TS4268
    Using FaceTime and iMessage behind a firewall
    http://support.apple.com/kb/HT4245
    iOS: About Messages
    http://support.apple.com/kb/HT3529
    Set up iMessage
    http://www.apple.com/ca/ios/messages/
    Troubleshooting Messages
    http://support.apple.com/kb/TS2755
    Setting Up Multiple iOS Devices for iMessage and Facetime
    http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
    FaceTime and iMessage not accepting Apple ID password
    http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
    Unable to use FaceTime and iMessage with my apple ID
    https://discussions.apple.com/thread/4649373?tstart=90
    For non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
     Cheers, Tom

  • I have rented movies on my Ipod that I have watched but canot delete from the list on my Ipod, what should I do to delete these movies.

    I had rented a movie on Itunes after watching the movie it did not delete from the Ipod and still appears on the rentals but can not be watched, I would like to delete it from the list, what should I do?

    Try resetting your iPod by pressing and hold both the Select (Center) and Menu buttons together long enough for the Apple logo to appear.
    Otherwise, try unsyncing and resyncing your iPod with iTunes.
    B-rock

  • I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    I have video clips with 4 channels of audio, I can only hear audio recorded on channel one, how do I hear the other channels......?

    What version of Premiere Elements and on what computer operating system?     Elements 13 on Windows 7
    What is the brand/model/settings of the camera that recorded these videos?        ony  PMW 320
    When you import them into your Premiere Elements project, what does Premiere Elements Properties for that import give for
    the audio description in the way of number of channels? If you open the Audio Meter (Window Menu/Audio Meters) and you play back
    the video in the Premiere Elements Editor, how many channels does the Audio Meter display?   
      I just drag and drop video and when playing back only channel 1 will appear
    What is your intended export for this video in terms of audio as well as video compression and formats?    MP4
    I think you can only use audio if it's recorded on channel 1 or it does not recognize it.
    Thanks for the help if possible,Kevin416 873 8374

  • I have a iPad 1 (first one)  I downloaded some movies from iTunes and with full volume I can barely hear them, but the apps I have downloaded are much louder.  Any suggestions

    I have a iPad 1 (first one)  I downloaded some movies from iTunes and with full volume I can barely hear them, but the apps I have downloaded are much louder.  Any suggestions

    She must have signed into her own Apple ID on your iPad in order to sync her content from iTunes so try this and see if it works.
    Settings>Store>Apple ID. See if your ID is showing in there and if it isn't - tap on her ID, sign out and then sign in with yours.
    You should not be syncing to to different iTunes libraries. The iPad can only sync with one iTunes library without erasing the the content on it if you decide to sync to another iTunes library.

  • How can one change the channel of a screen control within Mainstage?

    The issue that I'm having is that some 3rd party apps (Dimension Pro in particular) seem to receive Sustain (64) messages on only Midi Channel 1
    I'm using a multi zone controller, with sounds set in MainStage to respond to different channels. I've got it all working well except . . Dimension Pro won't "see" a controller message if it's sent from any channel other than channel 1.
    I was even having the same problem with certain sounds in Kontakt.
    So the question is . . how can one shift the channel of these messages over to channel 1?
    Better question, how can I get Dimension Pro to respond to a controller on a channel other than 1, but I suspect this is not the forum for such questions!
    Thanks in advance,
    Mark
    MacOS 10.7.3
    MainStage 2.1.3
    Axiom 61 (2nd gen) keyboard controller

    You may be able to achieve the desired results by a different method. I have an Axiom, but I don't assign zones in it. I just send one zone to Mainstage and handle it all there. You can layer and or split a practically unlimited number of instruments and assign screen controls easily. You probably want to set up all screen controls at the concert level in layout mode. You can later override concert mapping in individaul patches if you want. For instance, you could use an expression pedal for volume(7) on one patch and for modulation(1) on another patch. You can send that control to one instument channel strip or you can choose to send to all. To do this, select a screen control in edit mode. In the screen control inspector, check the overide concert mapping box. You will then see two additional tabs-mappings and unmapped. Select the mappings tab. In the mapping list, double-click "Unmapped". You can the map the screen control to any single  instrument channel strip in this list or send to all. Select one and then choose a mapping destination. If you want to map expression to one instrument and not others there's another way. Select an instrument channel strip, then selct MIDI input in the software channel strip inspector. Check the filter expression box. This instument will now not respond to expression, but the other intruments in this patch will. You can filter some other events on this page. The layer editor tab allows you full control ol splits and layering options of all your instruments in this patch. Hope this helps.

  • I have an iPhone 6.  For the first two weeks my bluetooth worked fine but then started having issues.  Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls.  The radio continues to play.  Please help!

    I have an iPhone 6.  For the first two weeks my bluetooth worked fine but then started having issues.  Now, although it shows that it is connected to Bluetooth, I can't hear any of the calls.  The radio continues to play.  Please help!

    Hello there, Srushevics.
    It sounds like you may be having issues with the connectivity of your iPhone with the Bluetooth in your vehicle. The following Knowledge Base article offers up some great steps for troubleshooting that Bluetooth connectivity with your iOS device:
    If you can’t use a Bluetooth accessory or car kit
    To resolve the issue, you'll need to first sign in to iCloud and review your devices:
    Sign in to iCloud on your iOS devices and Macs with OS X Yosemite (available this fall).
    On one of your devices, tap Settings > Bluetooth and look under My Devices. You'll see all devices that are connected to Bluetooth, but make sure that you see your Apple devices that are signed in to iCloud and are using iOS 8 or OS X Yosemite.
    Sign out of your iCloud account from any devices that you don't want to use. To sign out of iCloud on an iOS device, tap Settings > iCloud > Sign Out.
    Then, remove any inactive devices from iCloud:
    Sign in to iCloud.com.
    Select Find My iPhone.
    Select any devices that aren't active anymore.
    Wait for Find My iPhone to stop trying to find the inactive device.
    You should see the option to remove this device from your account. Select it to remove the device.
    After following the steps above, restart the device with the issue. Then try to use it with your Bluetooth accessory.
    Thanks for reaching out to Apple Support Communities.
    Cheers,
    Pedro.

  • When watching a slideshow I could always access music from my iTunes folder.  Suddenly today I can only hear music under the 'theme' tab.  I can see my music in iTunes but when I double click on it nothing happens!

    when watching a slideshow I could always access music from my iTunes folder.  Suddenly today I can only hear music under the 'theme' tab.  I can see my music in iTunes but when I double click on it nothing happens!

    In iTunes go File -> Library -> Organise Library -> Reorganise Library.
    Then quit and restart iPhoto.
    Credit to user keysandfood who figured that one out.

  • HT1657 I couldn't play movie rental and accidentally rented it twice. How can I remove one of the charges?

    I just bought and used my apple tv. I tried renting a movie but was asked to go to my itunes to verify my info. In the  process, I ended up renting the movie 2x and had to accept to be able to get the PLAY button to pop up on the screen. I watched to movie but do not want to be charged 2x for rental.
    How can I remove one of the charges?

    You can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/ - click on Contact iTunes Store Support on the right-hand side of the page, then Purchases, Billing & Redemption

  • I can't change the email on my iCloud account on my iPhone because I can't remember the password, and I can't remember one of the security questions. What do I do?

    I can't change the email on my iCloud account on my iPhone because I can't remember the password, and I can't remember one of the security questions. What do I do?

    Hi karen615,
    Welcome to the Apple Support Communities!
    If you cannot reset your Apple ID password via security questions, you can reset via email authentication. If you are not receiving the email, it may be necessary to contact Apple Support using the link in the Get help section toward the bottom of the article. 
    If you forgot your Apple ID password - Apple Support
    Best regards,
    Joe

  • How do i find my newest itunes tv downloads, in my video app.  In the OS7 all my purchases are there so i can find which one is the new ones that i have not watch M

    How do i find my newest itunes tv downloads, in my video app.  In the OS7 all my purchases are there so i can find which one is the new ones that i have not watch

    Hi Bill...
    Read here >  Creating an iCloud account: Frequently Asked Questions

  • I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod "Rick's IPOD" is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

    I bought a MAC for the first time and plugged my Itouch into it to download my music on it, but is says The iPod “Rick's IPOD” is synced with another iTunes library. An iPod can be synced with only one iTunes library at a time. What should I do?

    Same as you would if you bought a pc; copy everything from your old computer to your new one.  Then you can just sync everything from the new computer, as you did with the old one.

  • I use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

    i use an iphone 3gs can i set one of the song as ring tone or i will only be able to use the inbuilt ringtones?

    yes you can
    A. how to make a ringtone using iTunes
    First, open up iTunes in order to make a ringtone using iTunes. Find the song you want to turn into a ringtone by browsing through your music library.
    Next, find exactly what part of the song you want to make a ringtone using iTunes. For example, if you want to use a specific section of the song from 21 seconds to 40 seconds, make a note of where you want the ringtone to begin and end.
    Now, right click on the song you want to turn into a ringtone. Click "Get Info". Now, in order to make a ringtone using iTunes, click the "Options" tab.
    Check the "Start Time" check box. Type in the point in the song where you want the ringtone to start in the format "minute:seconds" (e.g. the second mark would be 0:20). You can also be more precise by adding a period and putting milliseconds in after that (e.g. 0:20.150, would be 20.150 seconds). Also, click the "Stop Time" check box and enter where you would like the ring tone to end. Keep in mind ringtones can only be around 39 seconds maximum. Press "Ok". We are almost done making a ringtone in iTunes
    Now, right click on the same song. Select "Convert AAC Version". If it is in another file format, you can go to "Edit" then "Preferences" and under the "General" tab click "Import Settings"; change the file format to AAC. After you select "Convert AAC Version" a new file will be created, but it will only be the segment of the song that you specified earlier.
    Now, you have to find the file you just created. Right click on the new, shorter song and select "Open in Windows Explorer". The file extension should be .m4a. Rename the extension to .m4r by right clicking the file and selecting "Rename".
    Now you can delete the shortened version of the song in your iTunes library. Then, double click the .m4r file and it will loaded into your iTunes Ringtone list. Now you can make a ringtone using iTunes!

  • At home I have two wifi networks , I try to use one of them depending on their strength of signal, can I not save  both their passwords on Apple TV , so that I can switch to one of the two wifi networks as required

    At home I have two wifi networks , I try to use one of them depending on their strength of signal, can I not save  both their passwords on Apple TV , so that I can switch to one of the two wifi networks as required
    Also the passwords are long and cumbersome to type every time on the apple  TV remote, what is the alternative if I cannot store them on the memory of the Apple TV

    Is it possible that you are using the same password for the old O2 Study and newer O2 Apple Base Station networks?
    If so, Keychain Access is storing the old information about the old network and may be associating it with your AirPort Extreme settings based on the BSSID that William has mentioned.
    If that's the case, open Macintosh HD > Applications > Utilities > KeyChain Access and look for a listing with the old network name. Delete this entry. You may need to power down both the computer and the AirPort Extreme and restart them.

Maybe you are looking for