I can't hook into the Internet

Why can't I hook into the Internet with my iPad mini? I selected it, put in the password, but it says "connection not available." my other devices are hooked into that Internet.

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Similar Messages

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper)

Does anyone know how to use pages so you can export pdfs from the internet and automatically drag words from the document into the file name of the pdf (i.e., author, title of a scientific paper). For example, if I am downloading a paper by smith called "Surgery" that was published in 2002, it will automatically set the file name in the download to smith- surgery 2002. I have heard pages is smart enough to do this.
thank you

Pages can export only its own documents. They may be exported as PDF, MS Word, RTF or Text files.
Pages can import (ie. Open a file as, or Insert a file into, a Pages document) documents in several formats, but won't rename the document as you describe. Documents that can be Opened (eg. Text, AppleWorks 6 WP, MS Word files) are converted to Pages documents, and retain their original names, with .pages replacing the original file extension. Files that can be Inserted (generally .jpg, .pdf and other image files) become part of the existing Pages file and lose their names.
It may be possible, using AppleScript, to extract the text you want and to Save a Pages file using that text as the filename, but that would depend in part on being able to identify which text is wanted and which is not.
How will the script determine where the author's name begins and where it ends?
How will the script recognize the beginning and of the title, an decide how much of the title to use in the filename?
How will the script recognize the year of publication?
For papers published in a specific journal, with a strict format for placing each of these pieces on information, or containing the needed information as searchable meta data in the file, this might be possible. But it would require knowledge of the structure of these files, and would probably handle only papers published in a specific journal or set of journals.
Outside my field of knowledge, but there are some talented scripters around here who might want to take a closer look.
Best of luck.
Regards,
Barry

I have a 4th gen iPod touch and I can not connect to the Internet even though my iPad works and my computer let's me get into the Internet. It gives me a message cannot to server. Please help I have tried to reset it but that does not work

I have a iPod touch 4th gen. And I cannot get into the Internet I get a message that say cannot connect to server. The other computer and my iPad still work with the Internet . I have reeked to reset it but that does not work. Please help me.

I do not know wat "reeked to reset" means.
Try the following:
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears
- Power off and then on your router.
- Reset network settings: Settings>General>Reset>Reset Network Settings
- iOS: Troubleshooting Wi-Fi networks and connections

Ipad keeps asking me to sign into iCloud. The problem is, I can't connect to the internet to do this because it keeps popping up. It's a 'catch 22'.

A pop up on my iPad keeps asking for my iCloud password, however, when I give it, it doesn't matter because I am not connected to the internet. I CAN'T connect to the internet because of the popup. How can I get rid of the pop up so I can connect?

You have bought the book but have you previously downloaded it to your iPad? If you go to your books collection and there is a little cloud icon on the cover of the book with a down arrow that means it's not stored on your device and you would need an internet connection to read/download it. If that's not the problem and Demo's suggestions don't work how about trying this desperate move: Settings > Airplane Mode (turn on) And try again. Do you have other downloaded books in your collection? If so do they act the same way or do they open ok? If they open then there is something corrupt about that particular book in which case I would delete it and re download it when you have access to the internet.

Can't connect to the internet with my wired desktop computer or my wireless laptop!

I'm stumped? Tonight I was surfing the internet when all of a sudden I lost my internet connection from my desktop computer? I tried various solutions to fix this but nothing worked? I'm currently hooked up to a wireless router model WRT160N. Here's the clincher, I unhooked the ethernet cable from the port on the router labeled "internet" and hooked it back into my ethernet port on my desktop computer and persto everything worked fine!! I can't connect to the internet either using my laptop!? I hooked everything back up to my router and tried accessing the internet but nothing worked? When hooked up like this I lose my internet connection on my desktop computer as well??? I'm confused??? What could be causing this??? I've just recently configured my router last Satuday with the help of a Linksys technician?? I bought my router last tuesday!?! Need help here!!!! Both my laptop and desktop computer have Windows Vista Home Premium as OS.

You need to re-configure your router...
If your Internet Service Providor is Cable follow this
If your Internet Service Providor is DSL follow this

After update I can't connect to the internet in no way, shape or form

I rarely update because: 1) something always breaks when you update (like now) and 2) I don't like to deal with new crap like GNOME 3. Anyway:
I bought a new router (TL-WR1043N) and configured it with an old Ubuntu because connecting to 192.168.1.1 didn't work on any of my Arch Linux installations. Now... here's where it all starts... I can't use the 'n' wireless on my laptop since I have to install something to use WPA, and to install that I need to update, but I don't want to deal with GNOME 3 and Firefox >3. But I gave up eventually gave up and connected my laptop to the router by Ethernet cable. Setting that up was very easy: 'ifconfig eth0 up; dhcpcd'. Voila! I updated my whole system and restarted. To see how badly I damaged my system I opened Nautilus (I use Openbox with some GNOME programs): shock and dismay, the fonts are visible from the moon. I guess I'll have to quit using GNOME programs completely now but I expected that. I used to use KDE back in the day and when KDE4 came forth from that unholy pit, I immediately abandoned it for GNOME. This time we had more time to prepare, everybody knew what GNOME 3 was going to be. I started using Openbox quite a long time ago.
Anyway: Now to fix my wireless right? WRONG! I can't connect to the internet on cable to get the packages for wireless. I installed Windows 7 64 on the same laptop and it connects to the cable. Ubuntu 9.10 Live also connects, but due to the changes of rc.conf and network stuff I can't connect at all with Arch Linux.
So I decided to abandon it completely and reinstall from scratch. But the Live CD also doesn't work. With all the ways I've tried it all comes down to this:
dhcpcd always times out waiting for a carrier and 'ip addr' shows 'eth0: <NO-CARRIER, ....' if the interface is up. I'm not sure what information I should give you, but I can't paste any here since I can't connect to the damn internet on that laptop.
About the router: the cable is plugged on port 1 and the LED for it flashes if I reboot the computer. In Windows it stops flashing while it connects and flashes again when connected. I removed 'network' from DAEMONS and it flashes till I start it with '/etc/rc.d/network start'. This hangs for a while and returns '[DONE]' even though it doesn't work and the LED never flashes again on the router.
In rc.conf I have exactly what the example says for DHCP. In any case, it doesn't work with the Live CD either.
EDIT 1: From lscpi: painstakingly typed:
06:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
07:00.0 Ethernet controller: Realtek Semiconducctor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
EDIT 2: Just to be clear: I can use the wireless on the laptop on the Live CD, but I want to use the cable because of the greater speed (94Mbit/s on cable 60 something on wireless n, 20 something on g) and because I rarely move the laptop.
EDIT 3: lspci -v shows "Kernel driver in use: r8169 / Kernel modules: r8169", so the driver is loaded.
EDIT 4: So if I boot from the CD. ip addr shows:
eth: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN qlen 1000
link/ether 00:1d:92:...etc... brd ff:ff:ff:ff:ff:ff
And the LED flashes. When I type: "ifconfig eth0 up" it stops, never to light up again and ip addr shows: "eth: <nO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
Last edited by imtired (2011-09-08 12:36:51)

When you're in Arch, use output redirection
lspci >lspci.out
then boot into Ubuntu or something where you can access the files and the BBS, Of course, don't forget to use a new file for each command output.
The new network config in rc.conf is not that complicated (wired anyway; never used wireless). OTOH I've had issues on two machines where I have to restart the network daemon (rc.d restart network) or rerun netcfg (netcfg eth0) after boot to get connectivity. And I still haven't come to grips with the ip command.

Macbook air can't go to the internet when connected with hard disk

Hi, so my macbook air can't go to the internet everytime when it is connected with my hard disk. The wifi icon on the top right corner says my macbook is connected to my wifi but my macbook just can't go to the internet. I unplugged my hard disk and I have no problem connecting to the internet right away? I would like to know if there is any solution for this problem.
Thank you

Try resetting your SMC.
Resetting the SMC of an Intel-based portable Mac with a battery you should not remove on your own
Note: This will not delete any data.
The SMC is responsible for controlling various system functions. None of your data will be deleted by resetting the SMC.
Shut down the computer by going to Apple () > Shut Down…
Select Shut Down or allow the computer to shut down automatically.
Plug in the MagSafe power adapter into a power source and then connect it to your Mac if you have not already done so.
On the built-in keyboard, press the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
Release the (left side) Shift (⇧), Control (⌃), and Option (⌥) keys and the Power Button at the same time.
I hope I helped.
Austin

Is there any way to hook into the SQL report pagination process?

I have a SQL report (based on EMP) with a radiogroup row selector.
The scenario 1 and 2 are in place
1) When the employee row radio group is clicked the P900007_JOB the text item is populated with the JOB for the employee.
2) When the page is initially displayed or submitted via the button the first row’s radio group is programmatically clicked and therefore populates the additional job information in P900007_JOB
Info (radio Group) Employee No Name
(+) 7369 SMITH
() 7499 ALLEN
() 7521 WARD
P900007_JOB CLERK
1-3 Next>
Once the report has been displayed and the next or previous pagination is used then none of the radio groups will be selected and the data in the P900007_JOB text item will still display the job of the last selected employee row.
What I require is on pagination some sort of mechanism to either
a) Call the page_init() that should then set the first row as selected and populate the text item via the programmatic click. (preferred option)
b) OR blank out the additional text item P900007_JOB.
Is there any way to hook into the pagination process?
I have a work around – Set the ‘Enable Partial Page Refresh’ to ‘No’ but this means a full refresh every time the pagination is used.
Details of my page
Report Region (Based on EMP table) – radio group as a row selector
select     APEX_ITEM.RADIOGROUP(1,EMPNO,'X21',null) CHECKRG, EMPNO,
     ENAME,
     JOB
from     EMP
Report Attributes -
Report template :- P900007_ROWTEMPLATE (custom template see later)
Report Attributes Substitution :- id="emp_report" (used in page_init see later)
Enable Partial Page Refresh :- Yes
Columns – All columns are selected as show but job is left out of the template below.
P900007_JOB - Text item in report region (disabled does not save state). Populated with the employees job when the radio group is clicked.
Control region :- HTML region that just holds a button <GO> just to submit the page and redirect back to the same page.
P900007_ROWTEMPLATE (named column row template)
Row template 1
<tr style="cursor: hand; cursor: pointer;" onmouseover="row_mouse_over(this, 1)" onmouseout="row_mouse_out(this, 1)" #HIGHLIGHT_ROW# ">
<td class="t15data" onclick="selectRow('#JOB#');">#CHECKRG# </td>
<td class="t15data">#EMPNO# </td>
<td class="t15data">#ENAME# </td>
</tr>
Before rows
<table class="t15standard" summary="" #REPORT_ATTRIBUTES# id="report_#REGION_STATIC_ID#" >
<th class="t15header" #ALIGNMENT# >Info</th>
<th class="t15header" #ALIGNMENT# >Employee Number</th>
<th class="t15header" #ALIGNMENT# >Name</th>
After Rows
<tr>
<td colspan="99" class="t15afterrows">
<span class="left">#EXTERNAL_LINK##CSV_LINK#</span>
<table style="float:right;text-align:right;" summary="pagination">
#PAGINATION#</table>
</td>
</tr>
</table>
*Javascript in page Header*
<script src="#WORKSPACE_IMAGES#apex_show_hide_region.js" type="text/javascript"></script>
<script language="JavaScript" type="text/javascript">

</script>
*Application shared component.* – This fires a DB packaged procedure when the page is loaded.
P330_PART_NO_HIST
Process Point On load after Body region
Process Text show_hide_memory.part_no_history_details();
*Packaged Procedure* – This kicks off the page_init javascript in the header (earlier) to click on the radio group in the first row.
PROCEDURE part_no_history_details AS
BEGIN
htp.prn('<script type="text/javascript">' || CHR(10));
htp.prn('' || CHR(10));
htp.prn('</script>' || CHR(10));
END part_no_history_details;
Thanks Pete
Edited by: Pete @ LSC on 26-Jan-2010 06:56

Anybody any ideas? Should I be looking down the route of using my own pagination buttons and adding my code to this?
There seems to be a routine $a_report that I can use for the pagination but I am finding it difficult to get the current first and last record values that I would need to pass. I've seen references to below in the form but when I'm using partial refresh they do not seem to change.
wwv_flow.g_flow_current_min_row
wwv_flow.g_flow_current_max_rows
wwv_flow.g_flow_current_rows_fetched
wwv_flow.g_request
Thanks Pete

Can't connect to the internet

Ok. so i did a search and didn't come across any other problems like the one I'm having.
Let me start off by stating that my laptop is an ibook g4 bought feb, '06 (yes the apple care just ran out).
I'm having a problem connecting to the internet on my ibook, running through a d-link wireless router. I'm using my imac to connect to the internet currently (which works fine by the way). It also is connected through the wireless router.
My ibook has a strange ailment. I open up Safari and all I get is a blank screen, the page is trying to load but the status bar is going no where and does the same in Firefox. So first, I opened Network diagnostics, but the computer freezes and I have to do a hard shutdown. (holding the power button). Next, I tried Disk utility. Verified Permissions, Repaired Permissions, everything is fine. I tried to Verify Disk, and again the computer freezes, will not let me force quit and I am forced to do another hard shutdown. I do the thing where you hold down some key while you're starting up to get into the disk utility so I can repair the disk. This returns clean as well. I downloaded techtool off of my Applecare disk. Did the tests, everything passes. So what's the deal?? I've tried to reset the pram. I even did the Apple Hardware test, everything passed.
I thought it could be my Airport card? It recognizes that there is an internet connection in the top right corner, I even have great signal strength (mostly because I've tried this sitting right next to the router). But still, I can't connect to the internet. Any one have any ideas? I don't know what else to try! Please help!

so i can't believe i didn't try to connect it directly to the router with the ethernet cord. This actually worked. But it still didn't solve my wireless problem. I'm not willing to let my laptop become a desktop. I'm already wired to a plug b/c the battery is slowly dying and has a life of about 5 minutes. I'm not willing to give up my wireless internet too.
I guess now it's got to be the airport card? how do I confirm this? and if it is how much would a new one cost and can I install it myself??

How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!

How do I set up my time capsule to operate as a wireless hub when it is not plugged into the internet? I want to be able to share wirelessly the information on the time capsule. thanks!

I would prefer to answer in your post. as I have tried on two occasions to help.. so far this is the first time I can see you stated you are using Lion.
1. Did you download and install the 5.6 utility..?
I said to do it.. you never said yes.. I did that.
Please do it. .. you will get no place before you do.
2. Did you bridge the TC.. ?
If so it will work perfectly.. please post a screen shot of the summary page from the 5.6 utility. If something is wrong I can work it out from there.
3. Or ring apple support and get them to walk you through the setup.. there should be phone support for the first week or two.

Can't connect to the internet with Airport OR ethernet cable

I know many other people are having problems with airport not being able to connect to the internet. I've never had any problems with my mac before, but 2 days ago, it started to act really funny. When i turned it on, my time and date were changed to Jan. 1, 2000, and I kept on getting notifications about configd and mdnsresponder wanting to connect to the internet. I did a little research and fixed that problem. Then, a few days ago, my internet was dropped from my computer completely, and I've never been able to connect via airport since.
The main problem is that even when I plug the ethernet cable into my mac, I can't connect to the internet either. It worked a few days ago, but now my computer can't even connect. It registers that the cable is in the computer, but thats' about it. The Network Diagnostics assistant tells me to restart themodem, and that hasn't been helping at all. Any helpwould be appreciated.

First Reset your Pram to see if resets you clock (the different Date caused the problems. Plus open System Preferences->Date & Time pane. In there make sure you set the current date/time and se if you can have the Mac automatically update the time from a Time Server.

I put the BT WiFi app on my iPad Mini and now I can't connect to the internet. Please help

I put the Bt WiFi app on my iPad Mini and now I can't connect to the internet. Please Help

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

I can't log into the Itunes store,says I need to update my security but the link won't open in Explorer, bad http!

I can't log into the Itunes store with my Apple ID.Says I need to update my security but the link doesn't work,bad http.Get internet explorer canot connect message.

Good day Goose253501,
It sounds as though your iPhone is having some difficulty accessing the App Store servers when attempting to sign in. I would suggest that you troubleshoot using the steps in this article -
Can't connect to the iTunes Store - Apple Support
Thanks for using Apple Support Communities.
Safe computing,
Brett L

Is there any way to hook into the TextModel from ICompositionStyle?

When creating a new custom attribute in IAttrReport there is the ability to hook into the ICompositionStyle interface. But I don't see any way from there to see which TextIndex it is composing. Does anyone know if it's possible?

Anybody any ideas? Should I be looking down the route of using my own pagination buttons and adding my code to this?
There seems to be a routine $a_report that I can use for the pagination but I am finding it difficult to get the current first and last record values that I would need to pass. I've seen references to below in the form but when I'm using partial refresh they do not seem to change.
wwv_flow.g_flow_current_min_row
wwv_flow.g_flow_current_max_rows
wwv_flow.g_flow_current_rows_fetched
wwv_flow.g_request
Thanks Pete

I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

I have CS 6 installed on a Win 7 OS machine. I can not connect to the internet to get updates from within the program. How do I fix this?

IP routing doesn't work the way many folks might initially think it does; functional IP routing requires manual configuration and the establishment of static routes and default routes specific to the local network configurations, and it's very easy to get it wrong, or to get the default route swapped. Multiple NIC boxes don't magically work, either. (Been there, done that, wondered what happened to my network when the paths got reordered or my route settings were messed up, etc.)
Routing configuration errors can be quite subtle, too. (Again, voice of experience. Ever had a thousand-seat office LAN accidentally routing through your desktop? As the, um, unnamed guilty party discovered, getting into that configuration was subtle. Seeing the performance crater on the fellow's box and on the LAN was obvious.)
Knowing how IP routing works is a prerequisite to getting this configuration to work; there's manual configuration required. Clearly something has gone weird here.
What to do? Read up on IP routing. I'll again suggest the threads and the manual mentioned earlier.
And in general, I prefer to avoid using my comparatively expensive Mac boxes as sub-optimal IP routers or as firewall boxes. General-purpose operating systems and generic x86 boxes are going to be inherently poor IP routers. Dedicated routers (or embedded or surplus x86 boxes with routing software loaded) offload the Mac boxes here, and are also typically easier to configure manage. And "real" IP routers can have hardware specific to efficiently routing packets. Use of an outboard firewall or firewall-router box also greatly simplifies gateway routing, too; it's a configuration that many folks and many businesses tend to use.

I can't hook into the Internet

Similar Messages

Maybe you are looking for