I can't install any softwares and any update to my Macbook Pro?

I can't install any softwares and any update to my Macbook Pro?
<Edited by Host>

ttlmdy,
which model MacBook Pro do you have?
What exactly happens when you try to run a software installation or a software update?

Similar Messages

I can't install any audio device on MacBook Pro 2012

I got a new MacBook Pro 2012 but I can't install any audio device, specially Native Instruments (Traktor)
is there an issue with Mount Lion?
Thank you

Troubleshoot with install logs
Mylenium

I can't install any updates on my macbook!

Hi !!! i am still running Lion 10.7 and never been updated but when i try to update to 10.7.4 the update fails can anyone help me ?

Safest bet would be replacing speed for certainty. Download the 10.7.4 combo installer directly from Apple and apply it manually: http://support.apple.com/kb/DL1524 Note that it will take A WHILE to download.
I recommend you Repair Disk and Repair Disk Permissions on the startup drive first by restarting in Recovery Mode. Hold down the Command R keys prior to the startup chime.

Can't burn any DVD on my macbook pro

I can't burn any DVD on my macbook pro, also some of previusly burned DVD are not recognized now & cant be mounted. I tryed choosing different software Burn, KKitchen, Titanium Toast 11, LiquidCD, NTIDragonBurn_v4_OSX, ExpressBurn_i (also burn from Finder) and different brands of DVD -- same diagnostics -- Medium error. One brand (TDK DVD+R) is unstable burn one or two disc tnan begin spoil DVD discs. Have you any solutions?
Model Name:          MacBook Pro
Model Identifier:          MacBookPro8,2
Processor Name:          Intel Core i7
Processor Speed:          2,2 GHz
Number of Processors:          1
Total Number of Cores:          4
L2 Cache (per Core):          256 KB
L3 Cache:          6 MB
Memory:          4 GB
Boot ROM Version:          MBP81.0047.B27
SMC Version (system):          1.69f3
OPTIARC DVD RW AD-5970H:
Firmware Revision:          3APE
Interconnect:          ATAPI
Burn Support:          Yes (Apple Shipping Drive)
Cache:          2048 KB
Reads DVD:          Yes
CD-Write:          -R, -RW
DVD-Write:          -R, -R DL, -RW, +R, +R DL, +RW
Write Strategies:          CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media:          To show the available burn speeds, insert a disc and choose View > Refresh

Have you read this post? may help you
https://discussions.apple.com/message/18149044#18149044

Can I install Windows 7 System Builder Addition on a MacBook Pro?

Can I install Windows 7 System Builder Addition on a MacBook Pro?

rmsmac,
do you mean Addition, or Edition? Is it a 32-bit version of Windows 7, or a 64-bit version of Windows 7?
Why don’t you give it a try, and report back on whether you’re able to or not?

I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

I can't install my old logic 8 on my new macbook pro. It says it does not support powerpc applications anymore. what do i need to do?? this is ridiculous!!!

Logic 8 will probably run on your new machine but the installation program contains some older PPC code for pre Intel Macs. This was not a problem as all OSX versions contained the "Rosetta" PPC emulation, that is, up until Lion when all PPC emulation was dropped.
There are ways to do this however, try searching Google for: Installing Logic 8 under Lion or Mountain Lion.

How can I install Final Cut Studio 2 on my new MacBook Pro with Lion?

I just purchased and received a new 15" MacBook Pro (non-retina) last week. I need to install Final Cut Studio 2 on this computer. I have researched this and found that I need to install Rosetta from the Snow Leopard DVD in order to do this. This is the first Mac I've bought ( although I've been working with them for years), so I don't have a Snow Leopard DVD. I am a high school teacher and we use FCS 2 for my classes so buying FCP X is not a viable option for me since I teach FCP 6. The iMacs we use in school run Leopard and were never upgraded to Snow Leopard (budget cuts and all), so I can't even borrow one from my district.
Does anyone know how I can obtain Rosetta? Or another way to install this without it?
Thank you ! :)

There is no way to add Rosetta support because it is not supported by OS X Lion at system level. This has been documented before the release of OS X Lion by itself.
If you really need Final Cut Studio 2, I would return your computer if possible, and purchase a Mac that is capable of running Snow Leopard (all 2010 models, early 2011 MBP and some other 2011 models)

OSX 10.8.5 Can't install any updates for any of my 3rd party software

Hi Guys
Don't know if any of you out there can help me but for some reason I am unable to install any unpdates for ANY of my third party software on my System Drive or any other drive for that matter. I continually get the little yellow triangle on the drive icon at the "destination select" stage of any update installation. Ive never had this problem before and it's only been happending over the last week and i haven't changed any OSX settings. Also im logged in as the Administrator and have the permissions set to read & write to all my drives.
Has anyone experienced this too?????

If you don't already have a current backup, back up all data, then reinstall the OS. You don't need to erase the startup volume, and you won't need your backup unless something goes wrong. If your Mac was upgraded from an older version of OS X, you’ll need the Apple ID and password you used to upgrade.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
If you installed the Java runtime distributed by Apple and still need it, you'll have to reinstall it.

CAN'T INSTALL ANY DRIVERS ON windows 10 pro x86 based system MODEL NO. HP G245 G3 NOTEBOOK

I have Installed windows 10 pro x86 based system on my G245 G3 notepad I can't find any drivers from HP website .
I have tryed win 8.1 pro 64 bit drivers but they are not working with win 10 pro 32 bit operating system.
please help me in this regard.
Thanks & Regards
I appreciate hp and its supports
Md Rayees Ahmad
consumer
This question was solved.
View Solution.

Hi,
Nearly all hardware vendors won't release drivers for Windows 10 until Windows 10 is officially released (not preview). Windows 10 should install drivers for your machine after few updates. Windows 10 can find all drivers (except one: finger print) for my 5 years old machine. It should be able to find drivers for newer machines).
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Took my 9350 to the desktop and installed the software and it updated my curve.

now it wants me to sign in with a blackberry id username and blackberry id password. does this automatically happen when i got my blackberry? i have never used blackberry as email. i have an email account that the blackberry sees when i get a new email in this account. or should i ignore the screen? do i lose my apps that came with the phone? i kinda laugh though at losing over two hundred contacts and think, so what? no big deal. at least i'm retired and the golf course knows where i am at if they need help... nice place to work... free beer occasionaly... charlie

Hi there,
Well, first off "it" did not update your device...you allowed it to do that update...I know of no conditions where the Desktop Software forces any updates at all..the end user always remains in complete control.
BB ID is the latest evolution in the RIM account unification process. There are many services that RIM and the carriers host for those that subscribe to an adequate data plan. Previously, each service required independent credentials...with BB ID, they are attempting to unify all of those separate credentials into one unified system, and embed that credential into a base level of the BB so that you only must log into BB ID once, and your BB remembers those credentials from then on, even if you reboot.
KB23716 What is a BlackBerry ID
But, in some circumstances, reloading an OS or performing an OS update, the BB ID credentials, saved to the BB, may get lost...and, after the update, you need to re-save those credentials (again, just the one time) to your BB upon it's first reboot after the update.
So, if you previously created a BB ID, then you need to use those exact credentials now. If you never created a BB ID, then proceed now with creating one -- for it is now required by the BB OS level that you allowed to be installed to your BB.
Now, to your specific questions:
chaskuchar wrote:
now it wants me to sign in with a blackberry id username and blackberry id password. does this automatically happen when i got my blackberry?
Explained above.
chaskuchar wrote:
i have never used blackberry as email. i have an email account that the blackberry sees when i get a new email in this account.
Hmmm...that's confusing. You have an email account that you integrated to your BB previously? And it's not now showing to you? If so, then after any update, I always recommend the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Batt Pull Reboot
Anytime random strange behavior or sluggishness creeps in, the first thing to do is a battery pop reboot. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes. See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
chaskuchar wrote:
or should i ignore the screen?
No...BB ID is mandatory with newer OS levels.
chaskuchar wrote:
do i lose my apps that came with the phone?
I'm not sure what specific apps you are concerned about...there are a set of built-in added apps that do sometimes change out with changes to OS levels. But, specifics would help more.
chaskuchar wrote:
i kinda laugh though at losing over two hundred contacts and think, so what? no big deal.
That should not happen...during most update processes, the process takes a backup and then restores your data afterwards. But, sometimes the user can defeat that...if you did, well, then...
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

Hello,
I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
I tried to install the software via the HP website. It's not working.
Can someone help me with this one ?
Thanks,

HP Print Drivers

I can't purchase any apps on my macbook pro

I recently purchased a Macbook pro and have been unable to purchase apps from the store. I can DL free ones but cant even purchase a 99 cent app. I keep getting an error code (100) and then a security update message. Has anyone else had this problem? Apple/Itunes support has thus far has not been able to get me up and running.

Try deleting the App Store cache and cookies...
Quit the App Store first if it's open.
Open the Finder. From the Finder menu bar click Go > Go to Folder
Type or copy/pasted: ~/Library/Caches/com.apple.appstore
Click Go then move the Cache.db file from the com.apple.appstore folder to the Trash.
Now type or copy/paste: ~/Library/Cookies
Click Go then move the com.apple.appstore.plist file from the Cookies folder to the Trash.

For some reason I am unable to successfully complete any updates on my Macbook Pro. Any help?

Hi there,
I have a 13" Macbook Pro (Mac OS X, Version 10.5.8). For a long time now, I haven't been able to run any software updates on my computer.
When I open Software Update, there are 6 items available for updating (including AirPort Utility 5.6.1, Java Update 10 version 1.0 and Safari version 5.0.6) but whenever I try to run an update, even if I do so individually, as my computer restarts and begins updating, at the very end it cancels. There are also updates for iTunes as well as other applications that I would like, but I believe the main issue is that I can't update the main software.
Does anyone know why this is occuring or what I can do to fix the problem?
Thanks for the help!

How large is your hard drive and how much space do you have left?
Boot up from your Leopard Install DVD while holding down the "c" key.
Select the language you wish to use, and then choose "Disk Utility" from the menu bar.
Your HD should appear in a panel on the left hand side of the window which opens. Select it and then click on the "repair disk" button in the right hand section of the window.
If Disk First aid is unable to complete the repair you will need to use a stronger 3rd party utility like DiskWarrior or TechTool Pro.
Once this process has been completed restart your computer, repair permissions and try Software Update again.

How can i install mac os x snow leopard on a macbook pro new hard drive

I replaced the hard drive on my macbook pro and I'm having difficulty installing Mac Snow leopard on the new hard drive. I press "C" when rebooting with the disk inside and all I get is "you need to restart your computer. Hold down the power button until it turns off, then press the Power button again" any suggestion?

Booting From An OS X Installer Disc
1. Insert OS X Installer Disc into the optical drive.
2. Restart the computer.
3. Immediately after the chime press and hold down the "C" key.
4. Release the key when the spinning gear below the dark gray Apple
      logo appears.
5. Wait for installer to finish loading.
Clean Install of Snow Leopard
     1. Boot the computer using the Snow Leopard Installer Disc. Insert the disc into the
         optical drive and restart the computer. After the chime press and hold down the
         "C" key. Release the key when you see a small spinning gear appear below the
         dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, set the format type to Mac
         OS Extended (Journaled, if supported), then click on the Partition button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. Be sure you configure your initial admin account with the exact same
         username and password that you used on your old drive. After you finish Setup
         Assistant will complete the installation after which you will be running a fresh
         install of OS X. You can now begin the update process by opening Software
         Update and installing all recommended updates to bring your installation current.

HT3986 i can not install windows 7 with boot camp on my macbook pro 17-inch eairly 2011

I have been trying to install windows 7 on my MacBook pro 17inch 2011, once i get to the step "burn a copy to a cd or DVD" the system runs and burns the information to the DVD but when the next step appears after I create the partition the program dose not recognize the DVD I created. when i save the copy to an external hard drive that is MS-DOS (FAT) formatted the same thing happens, the system just does not recognize the saved file. I have updated my computer and tired to check if I have any updates for the boot camp were available my current version is 4.0.1 (429). if there is anyone out there who can help, please do.

1st, you read the full guide, and you understand that you need to supply your own copy of Windows 7 (Home Premium preferably 64-bit).

I can't install any softwares and any update to my Macbook Pro?

Similar Messages

Maybe you are looking for