I can't install boot camp on my mac needer on my USB external disc!! WHy? it is very important for me to have windows

I need Urgently to install windows on my mac! but after i installed the new OS Lion 10.8.3, it won't let me install on my mac, only on a USB driver!! WHY?
And The download bar freezes at the middle. i let it 27hours downloading, and it was iin the same place! Help me please?

i tried to download the windows suport SOftware "boot  Camp" and it freezes!
No i can install the boot camp, but does not acept the windos 7
It runs all to the end the installation of windows, Then it begins, creating a new user, and when it will start , it CRACHES!
Jesus with the Lion it wasn't so Hard to install it!!

Similar Messages

  • Can't install boot camp(Am in desperate need of help!!!)

    Ok, the story, I will try to make it short:
    -Got my Imac a month ago. Installed Boot Camp Vista Home Premium 64 Bit. No problem. Ran smooth.
    -Later I got VMWare fusion and decided to check it out. Didn't like to to much, but now I can't install Boot Camp.
    -When using Boot Camp assistent, it creates my partition(which 200 GB) Fat32! The problem is, when it wants to boot to install. It ejects the Vista installation DVD! No matter what I do.
    -*If I hold down the ALT key(option button) during start up*, it will show a grey screen with two options(The Macintosh HD and the Windows Partition). Selecting the Windows partition gives a black screen with an error; *"non-system disk press any key to reboot"* Only problem is that the keyboard was dead or frozen so had to crash the machine.
    -Pressing D on start up to enable the *Apple Hardware Test* showed no problems.
    -Pressing Alt + Cmd(command) + P + R to *delete the NVRam and PRAM*, did not have any effect. I think I did it right though, because there came a second start up sound.
    -Pressing S + Cmd(command) on start up to run *User Single Mode*, with the command; "/sbin/fsck -fy" did not reveal any problems either, except for a weird long messege that kept coming up, and which interupted the line I was writing on several times. The messege was as follows: +":/root# AppleUSBEHCI[0x6e8t000]:: Found a Transaction Past the completion deadline on bus Oxfd, timing out!(Addr: 6EP:4)"+
    *Ran a program called Partition Inspector;*
    * Report for internal hard disk *
    +Current GPT partition table:+
    +# Start LBA End LBA Type+
    +1 40 409639 EFI System (FAT)+
    +2 409640 1531068455 Mac OS X HFS++
    +3 1531330600 1953525127 Basic Data+
    +Current MBR partition table:+
    +# A Start LBA End LBA Type+
    +1 1 409639 ee EFI Protective+
    +2 409640 1531068455 af Mac OS X HFS++
    +3 * 1531330600 1953525127 0c FAT32 (LBA)+
    +MBR contents:+
    +Boot Code: Unknown, but bootable+
    +Partition at LBA 40:+
    +Boot Code: None (Non-system disk message)+
    +File System: FAT32+
    +Listed in GPT as partition 1, type EFI System (FAT)+
    +Partition at LBA 409640:+
    +Boot Code: None+
    +File System: HFS Extended (HFS)
    +Listed in GPT as partition 2, type Mac OS X HFS++
    +Listed in MBR as partition 2, type af Mac OS X HFS++
    +Partition at LBA 1531330600:+
    +Boot Code: None (Non-system disk message)+
    +File System: FAT32+
    +Listed in GPT as partition 3, type Basic Data+
    +Listed in MBR as partition 3, type 0c FAT32 (LBA), active+
    I don't know what any of this means, but I suspect the Boot Camp partition is the last one. I wonder what "Boot Code: None(Non-system disk message" means!?
    *When running diskutil:*
    *diskutil list*
    /dev/disk0
    #: TYPE NAME SIZE IDENTIFIER
    0: GUIDpartitionscheme *931.5 Gi disk0
    1: EFI 200.0 Mi disk0s1
    2: Apple_HFS Macintosh HD 729.9 Gi disk0s2
    3: Microsoft Basic Data BOOTCAMP 201.3 Gi disk0s3
    /dev/disk1
    #: TYPE NAME SIZE IDENTIFIER
    0: FDiskpartitionscheme *931.5 Gi disk1
    1: WindowsFAT32 My Book 931.3 Gi disk1s1
    /dev/disk2
    #: TYPE NAME SIZE IDENTIFIER
    0: FRMCxFREDADVD *3.5 Gi disk2
    *And when I searched on the boot camp disc specificaly:*
    Device Identifier: disk0s3
    Device Node: /dev/disk0s3
    Part Of Whole: disk0
    Device / Media Name: Untitled
    Volume Name: BOOTCAMP
    Mount Point: /Volumes/BOOTCAMP
    File System: MS-DOS FAT32
    Partition Type: Microsoft Basic Data
    Bootable: Is bootable
    Media Type: Generic
    Protocol: SATA
    SMART Status: Verified
    Total Size: 201.3 Gi (216110792704 B) (422091392 512-byte blocks)
    Free Space: 201.3 Gi (216109285376 B) (422088448 512-byte blocks)
    Read Only: No
    Ejectable: No
    Whole: No
    Internal: Yes
    Other things I tried:
    -Tried going into Startup disk, to force Vista to install from boot up, but it ejected upon startup anyway.
    -Tried rebooting while holding down "C" to force a startup from a CD/DVD. Vista installation DVD still ejected.
    -Tried reinstalling Leopard with the Leopard Installation Disc 01, but it also ejecred upon rebooting to install! < This lead me to believe that it's my Superdrive that is messed up, but it plays DVD Movies just fine, and I even just now just burned the Vista installation DVD to my desktop in a .dmg file. So I am not sure if that is it!
    -I tried taking a different Windows Vista DVD(Windows Vista 32 Bit Home Premium) to see if it could install from that. It could not, and ejected upon startup like the Leopard and 64 Bit Home Premium Vista Installation DVD!
    I am new to Mac, but I am desperate after getting boot camp to work again. I have litterly been trying to figure this out for days, and I can't get it to work. I tried to call Apple but they couldn't help me.:( I could really use your help. I just want it to work.
    And speaking of working, I haven't been to work for two days, because I have been home trying to figure this out. It's critical that I get boot camp working. So please, mates, can't you help me.
    I simply don't know what to do:(
    Cry
    -Oil Pedestal

    Does [this firmware update|http://www.apple.com/downloads/macosx/apple/firmware_hardware/imacefifir mwareupdate13.html] apply to your machine? If so, putting it on may fix the boot from DVD problem.

  • Can't Install Boot Camp 3.0 on 64-bit Windows 7 system

    I have 64-bit Windows 7 Ultimate running on HD#2 on a Mac Pro 2,1 system (2006). I've installed the Boot Camp 2.0 drivers after I installed Windows, I forget why I needed them, maybe for an old Apple keyboard.
    Anyway, I can't install Boot Camp 3.0 from the Snow Leopard DVD - the installation runs to completion, but generates various error messages, one of which says that Boot Camp 3.0 64-bit can't be installed on this system.
    I really need 3.1 now because my Magic Mouse won't work, and I can't sync Mobile Me.
    Is there a fix or a workaround to upgrade Boot Camp on this system? Should I use Windows Uninstall to get rid of Boot Camp 2.0 first?
    If it matters, Windows 7 is the upgrade version from Vista Ultimate.

    http://www.apple.com/support/bootcamp/
    Click on "Downloads", (underneath the big hard drive icon), scroll down a bit and there is a link for "Boot Camp:Upgrading to Windows 7" and another link for Version 3.1 which you need for 64 bit to work right after 10.6.4(?). I would just try downloading the Boot Camp 64bit 3.1 file and try that first if you already have Window's 64 bit installed.
    Don't forget you need a WIRED keyboard AND mouse if you need to reinstall Window's.
    Here's another link that is all over the place on which machines and which Windows works and what doesn't...
    http://support.apple.com/kb/HT1846
    Hope that helped.....

  • Can I install Boot Camp on an external disk?

    I have a MacBook Air ( version 3,2) and I am running out of space to install Boot Camp. I use Windows 7 by the way.
    Can I install Boot Camp on an external disk? How do I go about doing this? I have an Apple external super drive and I have two USB ports on my computer.
    Can I install the mac operating system on the external disk including the Applications and then install Boot Camp as per usual? How would I get the Windows 7 program to install on the external disk using the superdrive that I have?

    BootCamp will only install on an internal disk.
    If you are wiling to do some work,  do some Google searches, use third party tools, and make your own custom Windows install disc, then you might be able to get what you want, but there is no guarantee that it will work on your specific hardware.
    I researched this topic a year or two ago and found people claiming that using rEFIt and custom built Windows install discs, that they were able to do what you seek.  After reading through all the instructions, I found it much easier to upgrade the HD in my MacBookPro to a 500GB drive and just installed my BootCamp on the spare 180GB space from the upgrade.  That took me a little over an afternoon, and it was fully supported...

  • Can i use pen drive to install boot camp on my mac?

    Can i use usb pen drive to install boot camp on my mac?

    No. Windows cannot boot from nor be installed on an external drive. That said, in the Windows world there are ways to put a bootable Windows installer on a flash drive. But you will have to find those on your own.

  • Can't install boot camp drivers on my windown vista

    Hello
    First:-
    I would like to say thanks to all of the members how helped me with allot of issues.
    Second:-
    I'm having a problem while installing boot camp drivers on my vista with using the Leopard disc, it always stop installing and gives me a message about sufficient privilege then i have to choose between these choices (Abort-retry-ignore)
    please guys how i can solve this problem??

    Well i did the same thing but i lost so many functions, such as:-
    1_ Volume controller on my keyboard is not working.
    2_ I cant switch to my macintosh unless if i restart and insert the leopard disc to open the startup disc and let me choose the way i want my computer to reboot.
    3_ isight is not working.
    4_ Bluetooth is not working.
    and so many stuff.
    i hope that there is another way like giving it the permission or something like that?
    please guys is there a way to solve this issue?

  • Install boot camp partition on Mac mini

    How to install boot camp on a Mac mini? It ask for a bootable DVD which I have inserted in my Mac book pro, but it does not recognize the DVD. How can I install boot camp on a mini?

    The Mac mini 2011 model does not have a DVD drive. It is possible to install Mac software over the network using another Macs DVD drive but this will not let you install Windows.
    You need to either use an external DVD drive and connect it to the Mac mini, or for Windows 7 it is possible to copy the installer on to a USB memory stick, boot from the memory stick, and run the install from that.

  • Can I install boot camp on new startup drive?

    I find I have to use Windows to administer a Network Solutions
    hosted and built website. They claim to support Mac OS but
    there are issues and they tell me that Internet Explorer is the
    more reliable browser to use. So I'm wondering if I should
    replace my primary drive with a new one and install Boot
    Camp. Is this a workable solution? Should I consider one
    of the virtualization programs?
    Tom

    I would suggest trying a VM first, and I would suggest using VirtualBox (as it is free), it will work but with a slight performance hit. If the hit is more than you can stand go the Boot Camp route.

  • I don't have my Windows XP disc how can I install Boot Camp?  I do have Windows Millennium disc.

    I would like to install Boot Camp on my MacBook.  I can't find any XP discs in my files although I have legal XP on my old PC.  I do have a copy of Windows Millennium.  What to do?

    Windows 7 is more stable.  OEM Windows 7 Home is $100.

  • Can I install Boot Camp 5 from Win 8?

    I have a late 2011 Mac Pro tower running Windows 8 and Boot Camp 4. I have had Windows 8 ever since it came out, that means that I upgraded to Windows 8 with the last version of Boot Camp 4 (with no issues BTW). Now there is Boot Camp 5,  and I want to upgrade my Mac Pro to Boot Camp 5, but the installer of version 5 tells me that I need Windows 7 to install Boot Camp 5. I already have installed Windows 8.
    How can I upgrade to Boot Camp 5 from Windows 8 in my Mac Pro without going back to Win 7 or by formatting my drive?
    Any help would be appreciated.
    Thanks!!!

    Thank youn for the reply...
    This is what I get when I try to install from the USB drive...

  • Can I install boot camp on a machine with a Software Raid-0?

    I have a machine with a software Raid-0 running Snow Leopard. I'd like to install Boot Camp but I only have 2 SATA hard drives. Windows does not need to run in a RAID on this machine and I'm fine partitioning both drives so that I have a 30GB Windows 7 partition. Both drives are 500GB each.
    Can I partition each drive with -30GB run a software raid and still use bootcamp?
    Please let me know.

    No, and 30GB is too small for Windows 7 64-bit Pro for your Mac.
    Get a 3rd drive. Assuming this is a Mac Pro you have 4 internal drive bays.

  • Can I install boot camp on my computer, but install all my PC games for it on an external hardrive?

    I have a new Mac, but I want to install boot camp on it. However, I would only really be using it for gaming.
    On another post, someone said that you could not install boot camp entirely onto an external hardrive. As boot camp would only be for gaming, then could I install all my games (when I'm given the option to chose the file of where to install) onto an external drive which is correctly formatted? (what is the format too?)
    Thank you

    Thunderbolt storage is a great idea. OS X can run off one and yes you can create an NTFS drive or partition.
    One person I thought said Tb was possible but may have taken a system image restore to get there, only one, and not 'documented' to say how to.

  • Can you install Boot Camp on a Pegasus2 Logical Drive?

    Trying to plan my upgrade to the new Mac Pros and I'm wondering whether it's possible to install Boot Camp on a logical drive located on a Promise Pegasus2 Thunderbolt enclosure? Ideally I'd be setting up a series of logical drives on a Pegasus2 (2 to duplicate existing drives in my current Mac Pro, 1 for Time Machine, and 1 for Boot Camp) but I can't seem to find out whether Boot Camp partitions are supported...

    I too would like to install a bootcamp partition on an SD card so that I will not loose a huge chuck of my internal drive to Windows, a system I need very rarely (this is important for all users of SSHDs, where internal storage space is precious).
    If it is not possible to create a bootcamp partition on an external SD card, how about installing Lion first on that SD card, booting from the SD card, and then creating the bootcamp partition on that card. I would think that Lion's disk utility would consider the SD card as the internal disk, and so should make the partition and allow the installation. Large fast SD cards are not cheap, but I would think that this would be an option for those of us with limited internal storage space.
    Has anybody tried this option?

  • Can't Install Boot Camp from Snow Leopard DVD in Windows 7

    I have an iMac "Core 2 Duo" 3.06 24-inc (08) running 10.6.2 and Windows 7.
    I was able to successfully use the Boot Camp Assistant to partition and install Windows 7 on my iMac. After the installation, I was able to download updates from Windows Updates which included video drivers.
    However, when I inserted my Snow Leopard DVD to install Boot Camp 3.0, the Setup.exe only gave me two options: To Install Mac OS X remotely and to install CD/DVD Sharing. I was not presented any options to install Boot Camp.
    I did manually navigate the Snow Leopard DVD and found a Boot Camp directory with its own setup.exe and when I clicked on it, it gave me an Installation Error stating "Boot Camp x64 is unsupported on this computer model". I did some research and I found no mention of my iMac listed as an unsupported model.
    Any help would be appreciated.

    When I inserted Snow Leopard DVD, the autorun didn't show me an option to install Boot Camp Drivers. Just like the author of this topic, it only showed me 2 options: to Install Mac OS X remotely and to install CD/DVD Sharing.
    Then, I've run Windows Explorer, navigated to Snow Leopard DVD, opened Boot Camp folder and runned "setup.exe". The installer opened and Boot Camp 3.0 was installed successfully.
    I don't know if it could help you guys with that error message, but after the installation of Windows 7 64bits, I've rebooted my Macbook Pro. Only after the reboot I did the Boot Camp Drivers installation.
    You can also try to run the "setup.exe" as Administrator (right-click, Run as administrator).
    Also, my Snow Leopard DVD is that grey one with the white "Mac OS X Install DVD" labelled on it.

  • Can't Install Boot Camp Software on WinXp SP2

    Here's what I have done thus far:
    1. Partition HD such that windows has its own 30 gig partition.
    2. Install FAT32 Windows XP SP2 on the new 30 gig partition.
    3. Insert MacOSX disk that came with my brand new Mac Mini as to install Boot Camp and drivers.
    4. Installation begins but soon fails. The error message reads "Installation encountered an error" and goes on to state there may be a "problem with the package"
    5. I have tried deleting this partition, creating a new one, and installing XP once again, but, still, I cannot find any luck. I even tried using my old Mac Mini OSX disk (which isn't that old -- 10.6.2) to install Boot Camp and the drivers, and still no luck.
    One thing that I noticed was that when I am in my Mac OSX partition and I check the version of Boot Camp, it states 3.0.2; however, when in Windows attempting to install Boot Camp it displays version 3.1. Now, when I used my older Mac OSX install disk (10.6.2), the Boot Camp version attempting to install was 3.0.
    So, essentially, I am entirely lost. I simply do not understand what I could have done wrong. Does anyone have any ideas? Thanks in advance!

    Hi and welcome to Discussions,
    first of to clear up the confusion.
    Apples BootCamp consists of two part: an OSX part which is the BootCamp Assistant and a Windows part which are the Drivers.
    These two parts can have different version numbers.
    The latest version of the BootCamp Assistant is indeed 3.0.2 and the lastest version of the Driver package is 3.1 (or later with the Mid 2010 released Macs).
    The problem and the error messages you receive make me believe that somwhow the optical disc drive in your Mac has problems reading the Windows part (where the Drivers are) of your OSX DVD.
    If you have access to a WIndows PC you might wanna insert the OSX DVD there and copy the full content of it onto an USB-Memory-Stcik.
    Back at your Mac insert that Stick while in Windows and copy the full content back onto your WIndows partition (C:) preferably into a new folder in the root directory (c:\Download for example).
    Regards
    Stefan

Maybe you are looking for

  • How can I create a Cell Format in Numbers that doesn't display zeroes?

    I can't figure this out. I need to view numbers in a column decimal aligned. If the number has trailing digits then all trailing zeros need to be removed up to the number of decimals to display. All remaining trailing zeros need to be hidden (not rep

  • "Washed out" screen after waking from sleep?

    Over the past couple of months, when either waking from sleep or coming off the screen saver, the display has a washed out look to it. The colors can be restored by either reinitializing the screen saver or putting the computer to sleep and waking it

  • Load balancing across multiple machines

    I am looking for assistance in configuring Tuxedo to perform load balancing across multiple machines. I have successfully performed load balancing for a service across different servers hosted on one machine but not to another server that's hosted on

  • VSTO.dll The system cannot find the file specified. (Exception from HRESULT: 0x80070002)

    Hello, I'm trying to install a VSTO on a clients machine and get the following error message. Could this be something wrong with the .Net Version? Application Domain:    AWAddinInstaller.exe Assembly Codebase:     update files/AWAddinInstaller.exe As

  • Attachments to BW

    Hello, As we are trying to load data from CRM boxes there are some attachments in the R/3 which we need to download and upload to BW. but the problem is those attachments are saving in HEXADECIMAL format in the tables. and in the frontend it is displ