I can't install Magic Bulle Looks 1.2

Guys, please help me! I can't install Magic Bullet Looks trial version on my Mac Pro... there is an error:
"...cannot execute binary file
logout"

Call/contact Magic Bullet. It's their software/their problem.
x

Similar Messages

How can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

how can i make magic bullet looks recognize my second graphic card in my mac book pro 2009

That model MBP gives you a choice of cards to use – one at a time. it is not designed for them to run in tandem - splitting up the workload.
Russ

I am having problem when I am installing magic bullet look 1.4 please help

Hi, I am having an issue with my Red giant magic bullet look 1.4
When I am installing this plug ins I receive a message saying: your graphic card did not meet the minimum requirement but actually my graphic card did meet the requirement and I was looking at the requirement for this in website and my Gcard met the requirement. Why is it not installing?
please help me
I use premiere pro CS3
Win 7 OS 64bit
My graphic card is: NVIDIA GeForce 9800 GT (Microsoft corporation-WDDM v1.1)
The minimum requirements for the plug ins are: Magic Bullet Looks supports a wide range of cards from both ATI or NVIDIA. For ATI cards, we require a 9600 XT or greater, or an X series card starting with the X700 series. Cards with greater model numbers and at least 128 MB of RAM can run the Looks engine.
For NVIDIA cards, we support the 6600 model and higher or QuadroFX 1300 and up. Cards with higher model numbers and a minimum of 128 MB of RAM can run Looks. For users working with HD images, we require that the video card have at least 256 MB of RAM. In all cases, we suggest using the latest video drivers for your graphics card.
Please Note Since all media is processed at 32 bit, you will absolutely need a 256 MB graphics card or larger. For newer cards from ATI and NVIDIA, we recommend a minimum of 320 MB of RAM. For 2K projects, we recommend 512 MB or a larger amount of RAM on the graphics card.

Run this.
http://www.maxon.net/downloads/cinebench/cinebench-115.html
Report back the results.

How Can I install Magic Mouse on my IPad 3?

Hi there,
I have just received new iPad with retina display. I want to install Magic Mouse on it, but I can't find anywhere instruction for it. Any suggestions ? Thanks

Other than a stylus, this is the only "mouse" that will work with the iPad.
FYI
Complete guide to using iOS 6
http://howto.cnet.com/ios-6-complete-guide/
Guide to Built-In Apps on iOS
https://sites.google.com/site/appleclubfhs/support/advice-and-articles/guide-to- built-in-apps-ios
You can download a complete iOS 5 iPad User Guide and iOS 6 iPad User Guide here: http://support.apple.com/manuals/ipad/
Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
Apple - iPad - Guided Tours
http://www.apple.com/ipad/videos/
Apple iPad Guided Tours - Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
http://www.youtube.com/watch?v=YT2bD0-OqBM
http://www.youtube.com/watch?v=ROY4tLyNlsg&feature=relmfu
http://www.youtube.com/watch?v=QSPXXhmwYf4&feature=relmfu
How to - Articles & User Guides & Tutorials
http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
iPad How-Tos http://ipod.about.com/lr/ipad_how-tos/903396/1/
You can download this guide to your iPad.
iPad User Guide for iOS 5
http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
 Cheers, Tom

Magic Bullet Look Suite 2 Messing Up FCP

I just installed Magic Bullet Look Suite 2, and now whenever I try to open FCP it tells me it has quit unexpectedly. You know when you first open the program, and as it's loading there's that box in the middle of the screen with the name and logo of the application? Well, in there you can see all the parts of FCP that it's loading, and when it gets to Magic Bullet Look Suite 2, that's when it closes. I've tried restarting my computer, uninstalling and reinstalling the files, but every time it causes FCP to close. Does anyone have a solution so that I can use Look Suite 2 without FCP closing every time?

http://www.redgiantsoftware.com/magic.html
I had an older version of the Magic Bullet plug ins and I just downloaded the newer version and my serial number worked fine.
I did actually have one of the filters crash a render yesterday... so not all is good on my system either.

FCP Crashes while using Magic Bullet Looks

Hi All,
We have recently installed Magic Bullet Looks onto our main edit machine. However, using it causes FCP to crash with really annoying regularity. It seems to be related to either auto save or thumbnails (opening a sequence with Looks applied and it will crash while loading the thumbnails onto the timeline for example - that could be a coincidence as it crashes in many other situations as well but always when working with MBL))
I've tried the usual preference trashing things but can't stop it happening. Anyone had any similar issues that they've been able to resolve? We aren't yet running Snow Leopard but I may try that as a potential solution.
If it matters - the machine is dual 3.2 quad core with 6GB of RAM running FCP 7. It also has a Blackmagic Extreme card (tried turning external video off - no difference)
All thoughts greatly appreciated,
Regards and a happy new year to all,
Richard

Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
R

Red line with Magic Bullet Looks

Magic Bullet Looks in the Video Effects panel shows as a 32 GPU accelerated effect.
However, when I add it to a clip in timeline one, two or three, I go from no lines (including yellow) to a red line above that clip.
If it's a GPU accelerated effect why am I seeing a red line above the clip when I add that effect?
My card is a 285 that works fine with everthing else.

Magic Bullit Looks is not a accelerated effect, so that is why you are seeing the red line.
Effects with the icon on the left are accelerated.

Since installing Lion, no Finder window will open on the desktop. I can see them through "Quick Look" and "View all Windows" in the contextual menu for Finder in the

Since installing Lion, no Finder window will open on the desktop. I can see them through "Quick Look" and "View all Windows" in the contextual menu for Finder in the dock.

Help please!

I have 2 macs, 2 iPhones and am looking to buy an iPad. If I buy an app like pages or angry birds from the app store, can I install it on all of them?

I have 2 macs, 2 iPhones and am looking to buy an iPad. If I buy an app like pages or angry birds from the app store, can I install it on all of them? Is that legal to authorize all of those devices, I think I get up to 5, so that it would work?
Thanks

You can buy and install on all your IOS devices, and separately buy and install on all OSX devices, so 2 purchases.

Satellite A30 - Can I install a bigger HDD?

I thought I had been careful with bits of kit and boards. but after rebuilding my A30 (having had the DC socket replaced), it comes up with the following messages:
*SMART Failure predicted on Hard Disk 0: TOSHIBA MK4018GAS (PM)*
*WARNING: Immediately back-up your data and replace your hard disk drive. A failure may be imminent.*
*Press F1 to continue*
I have tried refitting board connector to HDD socket, which seems OK.
So am beginning to think I have killed this disk somehow. If so, can I install a bigger disk, say 80 or even 160 GB, and should I look for magic word MK4018GAS, or is it SATA or IDE, I am looking for.
Thanks. Robin

Hi!
If you remove the old HDD you can see ifs a IDE or SATA HDD but the Satellite A30 is equipped with a IDE HDD.
You can use a bigger HDD. This should not be a problem but as far as I know this notebook has a 28bit LBA limitation. That means the disk size limit is 128GB and so you can only use an HDD up to 120GB.
If you want to know more about this read the article on Wikipedia or here: http://www.48bitlba.com
So you can buy a 120GB HDD or a 80GB HDD as you suggested. I have good experience with Hitachi and Seagate HDDs.
Anyway, I think its a good idea to exchange the HDD. SMART error message appears only if there is something wrong with the HDD so backup your data as fast as possible. ;)
Bye

After Effects CC 2014 Crashing with Magic Bullet Looks on Mac

Hi,
I recently installed the upgrade to the latest After Effects CC 2014 v13.0 and found the Magic Bullet Looks now causes After Effects to crash. I'm using MBL v2.5.2
I opened the Activity Monitor and noticed that whenever the crash occurs the Adobe QT32 Server is in a state of (Not Responding)
On a clip I can apply the MBL plugin with no problems and even if I am copying a previously set up version from a previous clip, it applies and renders without trouble. I can click "Edit" on the plugin controls, open up the MBL control window and make all the adjustments I need without any trouble. The issue is when I then click either "Finished" or "Cancel" to go back to After Effects. The program freezes and I get the spinning wheel of death for about ten seconds and the the whole thing, MBL and AE shut down.
I am running:
MacBook Pro
OS 10.9.4
Processor 2.3 GHz Intel Core i72.3 GHz Intel Core i7
Memory 8 GB 1333 MHz DDR3
Graphics AMD Radeon HD 6750M 1024 MB
Cuda 6.0.54
The footage is Apple Quicktime ProRes HQ
I have Quicktime v10.3 installed and Quicktime Pro v7.6.6
I am at a loss as of how to fix or even work around this. Any help would be appreciated.
Thanks

There was a bug in MBL on Premiere CC 2014 that was causing crashing and lockups. Red Giant released an update quite quickly that so far seems to have fixed it for me. I know you're talking about AE but maybe there's some common code that was also fixed? As Rick says, have you checked the latest ver of MBL?

Adobe premiere pro cc 2014 freezing with magic bullet looks

Hi-
I'm running windows 8 with this software and I'm getting intermittent crashing when trying to work on any project when I'm also using magic bullet Looks on it. The frustrating thing is that it used to work fine in premiere Pro CC, but using the 2014 version is very unstable. Also, I cannot go back to using the non-2014 version because the file format is incompatible with the older version and I don't have another version saved. I've already done hours and hours of editing in 2014 only to keep having crashes.
Is anyone looking into this or has any recommendations so I can get work done.
Thanks!
-Lok

I don't use magic bullet Looks but is that a 3rd party plugin?
If yes, have you checked with the vendor to see if it needs to be updated for the new structure of CC 2014?
http://blogs.adobe.com/jkost/2014/06/installing-the-2014-release-of-creative-cloud.html

XML Crashing FCP while importing. Magic Bullet Looks could be the problem

Hi All,
Need a little help here.
I am using FCP 6.0.5 on a power mac G-5.
I am trying to open an XML which was exported out of FCP 7 as a version 4 XML.
Magic Bullet Looks is being used on the project, and I think this is were the problem is.
when importing the XML it crashes FCP when I select the Include Video/Audio Effects.
When I import the XML without this option selected it opens fine.
I have MB Looks Installed on machine, so the Plugins are there.
Just wanted to see if anyone has dealt with this issue or might have any insight to the problem.
I can post the Crash info on the specific thread if that can help.
Thanks!

Couldn't agree more Jim - hence why I'm not using Snow Leopard yet as I had a nightmare in the early adoption of an older operating system. As for MBL, there seem to be many using it without problems so I don't think it's an issue with the product per say and it really is a very good plug-in. (That view will change to excellent once the problems go away) I just need to get to the bottom of which square peg is destined for which round hole and I'm hopeful that all will be well. I've also submitted a support question to Magic Bullet so will update if I get a solution. I like the CleanApp idea. I'll try that as well. (and I may even give Snow Leopard a go!)
R

Has Anyone Been Able To Make A Custom Look In Magic Bullet Looks?

I believe a lot of FCP users also have Magic Bullet Looks installed. I also wonder whether you have been able to make a customised Look as described in the Help section?
I can alter a Look and go to File>Save and save it to a place of my choice.
However, I can't do it as described in the instructions, nor do I have a "Custom" folder.
This is how you are told to create your own Look:
+The name of the current preset Look is shown at the upper left of the Tool Chain. When a New Look is applied or No Look is chosen, the label will display Untitled Look. Double-click the name to enter edit mode. Clicking Enter again will create a new preset look with your custom name in a new category called Custom Looks.+
The Help instructions say double click the Look's name at the top left of the Toolbar and the edit mode will open.
All that happens is that I can alter the name but the moment I click it again it reverts to the original name (Untitled) and nothing is saved.
I am wondering if this works on PCs but not on Macs.
Any help would be appreciated.

Got it at last!
For the benefit of anyone else who is puzzled, this is how it is done. The original instructions were actually accurate though confusing.
1. Double click "Untitled" and add your new name.
2. Simply click the Enter key and the highlighted name should return to normal.
3. Your Look will now be available with all the others in a newly created folder called "Custom".
The original instructions were actually accurate though confusing

Adjustment layer and Magic Bullet Looks corruption

I often find using the adjustment layers to apply colour correction an easy trick and therefore love the concept.
However, I've recently noticed that PP CS6.0.2 does not like MB Looks to be applied to adjustment layers all that well.
On two recent projects, the primary sequence has become corrupt (PP loads and quits immediately) and I have to recover the edit by copying the none adjustment layer tracks to a new sequence and then relinking the media.
Today, I spent 4 hours recovering another complex sequence and wanted to know if any other person has had a similar experience applying MB Looks to an adjustment layer?
A word of warning to others who might be thinking of the same 'trick'.
Perhaps I am expecting too much of the adjustment layer concept.
Thanks for any responses.
J.

I found myself here because... I was trying to open last saved project and it just crashes.
I did use Magic Bullet "Looks" and "Cosmo" on both footage and adjustment layers.
"Panic... Drink Coffee" !!!!! idea !!!!
Uninstall Magic Bullet
Launch CS6APP
Open same project file warning you don't have plugins installed.
Delete the "Adjustment Layers" (you won't be able to get the adjustment layer settings back but, you will get the edit back
Save project "new name"
Re-install plugins
Re-open CS6APP
"new name" project file opens fine without the adjustment layers.
But wait!!! Why should you uninstall Magic Bullet?????
Open a new project
Import entire project file into new project
Go to media bin and delete the "adjustment layers"
Find last Sequence that had the adjustment layers and you can go back to working
We put finishing effects on entire or even sections of full edit
1. Select edit < New Sequence from clip... apply effects on new sequence
2. Not "adjustment layers" BUT!!
2. Right now I found this just be an issue with RedGiant plugins I'm going to pass this post along to them..
This is a link to our project we had this happen too. (Sound tweaking)
Superfine Bakery : Who we are on Vimeo
CS6APP 6.0.5
MacBookPro Retina 16 gigs of ram
Thunderbolt 2 drive with source
USB 3 drive writing scratch
(2) external monitors attached

I can't install Magic Bulle Looks 1.2

Similar Messages

Maybe you are looking for