I can't install QuickTime

A whille ago I uninstalled QuickTime because I didn't think i needed it, but then I learned that I need QuickTime to run Itunes. When I try to install QuickTime again, it goes through the installation but towards the end it has an error. It says there is a resource unavailable, and i need to designate a new path with the installation package 'Quicktime.msi'. I'm not sure what that means, and I don't know what the problem is. I uninstalled the last version straight from the control panel and im installing this one straight from this site. Can anyone help?

It says there is a resource unavailable, and i need to designate a new path with the installation package 'Quicktime.msi'
with that one, let's try the following procedure.
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
now try another QuickTime reinstall. does it go through properly this time?

Similar Messages

  • Can i install quicktime pro on 2 devices

    can i install quicktime pro on 2 devices
    Have upgraded to pro for laptop and now want to install on office PC, do i need to purchase again or can i use on multiple devices on one licence?

    can i install quicktime pro on 2 devices
    See paragraph 2 of the Software License Agreement for Quicktime.
    2. Permitted License Uses and Restrictions. This License allows you to install and use one copy of the Apple Software on a single computer at a time. This License does not allow the Apple Software to exist on more than one computer at a time, and you may not make the Apple Software available over a network where it could be used by multiple computers at the same time. You may make one copy of the Apple Software in machine-readable form for backup purposes only; provided that the backup copy must include all copyright or other proprietary notices contained on the original. Except as and only to the extent expressly permitted in this License or by applicable law, you may not copy, decompile, reverse engineer, disassemble, modify, or create derivative works of the Apple Software or any part thereof. THE APPLE SOFTWARE IS NOT INTENDED FOR USE IN THE OPERATION OF NUCLEAR FACILITIES, AIRCRAFT NAVIGATION OR COMMUNICATION SYSTEMS, AIR TRAFFIC CONTROL SYSTEMS, LIFE SUPPORT MACHINES OR OTHER EQUIPMENT IN WHICH THE FAILURE OF THE APPLE SOFTWARE COULD LEAD TO DEATH, PERSONAL INJURY, OR SEVERE PHYSICAL OR ENVIRONMENTAL DAMAGE.

  • Can't install Quicktime 7.03

    Other folks have posted similar problems, but I wanted to provide a little more detail.
    I got a nano for xmas and promptly installed itunes. A couple of days ago I got prompted to install itunes 6.02 (?)
    I downloaded and tried to install and got the message error -3 quicktime can't install.
    Now when I try to run itunes, I'm told that it can't run without quicktime.
    So here's what I've tried...
    turned off my anti-virus software
    installed the latest version of directx
    dl'ed the stand alone installer of quicktime 7.03
    removed quicktime from the registry
    purchased registry mechanic, and let it go at the registry
    searched for all files, hidden, system or otherwise, that had the words quicktime or qt in the filename. Deleted any that looked related to quicktime.
    searched for all files that were created on the day I first installed itunes, deleted any that looked related to quicktime. (including all plugins)
    rebooted the computer into safe mode
    installed the stand alone quicktime
    it almost finishes and then says...
    1607 unable to install installshield scripting runtime
    then it tells me that quicktime is installed and to click finish
    when I run itunes it tells me that it requires quicktime and to try installing it
    I'm pretty much out of ideas. I guess next I'll try deleting everything apple related from the registry and files, and try reinstalling from the disk in safe mode. (I've tried this once already...and got the error message that it couldn't uninstall quicktime).
    thanks for any help...
    Dell Windows XP

    This worked for me...(someone else posted this answer)
    Download the microsoft uninstaller at this link:
    http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1b d/msicuu2.exe
    Install the program and select quicktime on this list, uninstall it, reinstall 7.03.

  • Can't install quicktime or itunes I recieve error code 2738.  I'm running windows Vista 32 with Service Pack 2.  I have tried old and new version of both programs.  Also, have gone through Apple's online help with no good outcome

    Can't install quicktimeor uninstall it for that matter and itunes I receive error code 2738 with both downloads.  I'm running Window Vista with Service Pack 2.  I have check for all window update.  I have gone through Apple itune help list.  Even going into cmd to do regsvr32 vbscript.dll which was successfull. Can you help...my son had to register his ipod at the neighbors house..What going on.
    Son even call apple with no help and was give Microsoft number no help there either they wanted me to call HP.....run around

    Excellent news!
    Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
    Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
    https://discussions.apple.com/community/ipod

  • Can't Install Quicktime

    Whenever I try to install Quicktime (needed for itunes) I get the following error message:
    QuickTime Installation Failed:
    Error Code: -3
    Can anyone help?
    Thanks!

    I had the same problem, but I resolved it yesterday. Here's what I did.
    1) Uninstall QuickTime from the Add/Remove Programs control panel.
    2) Clean registry issues with http://www.ccleaner.com/ (freeware). Once installed just click on Applications and put a check mark next to Quick time. (don't skip this step, it is important)
    3) Restart windows.
    4) Turn off any anti-virus programs that are running.
    5) Delete the Quick Time folder, In C:|Program Files
    6) Reinstall QT from the standalone installer
    http://www.apple.com/quicktime/download/standalone.html
    I've used all these steps myself but now i get another problem when i install the standalone version of quicktime. I get Error 1402.

  • Can't install Quicktime - Error "A newer version of quicktime already..."

    Hi, I have a Dell XPS running Windows Xp Media edition. Quicktime files would not play so I downloaded the newest version of Quicktime and an error comes up saying, "A newer version of quicktime is already installed. This installation of Quicktime can not proceed while the newer version is installed." I can't find a newer version on the computer and the application seems absent. Only suplimentary Quicktime files are found. Please help.
    Thanks,
    Eric
    Dell XPS   Windows XP  

    I'm having this exact same problem. I have a Gateway running Windows XP Media Edition.
    I can't run quicktime, it says it's not there. I've tried uninstalling using add/remove and it says the uninstall.log file is missing. I tried uninstalling using the QT uninstaller option in its folder, it says the uninstall.log is not there. I tried 'repair' option on the iTunes+QT installer that I downloaded. Still the same issue.
    I tried the stand alone QuickTime installer and it tells me "A newer version of quicktime already exists".
    I tried deleting the residual quicktime folders from my c:\program files. I tried deleting the residual QT references from my regedit. I downloaded the MS Windows Install Clean Up and looked in there--found 2 more things that could possibly be quicktime related and removed those. I tried again -- same error message.
    I'm not sure what else to do. I'd really like to get Quicktime and iTunes working by Christmas so I can sync my shiney new iPod.

  • Can't install Quicktime 7 as won't uninstall Quicktime 6.5

    Hi
    Trying to install i-tunes with the new version of quicktime but when it tries to uninstall my current version of quicktime (6.5) the following message appears:
    Could not open key:
    HKEYLOCALMACHINE\SOFTWARE\Microsoft\windows\current version\uninstall\quicktime. Verify that you have sufficient access to that key, or contact your support personnel.
    How can i uninstall quicktime 6.5 & install the new version? What is a HKEY?
    i have contacted both itunes support and pcworld support to no avail. Can anyone HELP, PLEASE!!!
    Thanks

    I spoke too soon on that one. Tried everything listed in the certificate to no avail.
    6.5 version never did work on that PC. XP SP2, nothing special.
    It cannot go on line either. Lightning made sure of that.
    I deleted any version trace of it on the PC, Then several attempts of getting the right version for XP.
    Download it to a memory card on This Apple Laptop.
    Then over to the PC to install.
    After the 3rd try with finally the correct version of 7.1.6, we have success.
    A bit tough to find a version that worked. You don't know until the version is tried.
    There was no direct path searching for 6.5 of what it had and to what came next.
    No Guru God here.
    Just trying different sockets from the mixed up tray of choices to set the record straight.

  • I can't install Quicktime MPEG-2 Component in OS X Lion

    Hi friends,
    Today, I tryed install Quicktime MPEG-2 Component for use with software 'MPEG Streamclip'. I have a Macbook reformated and with OS X Lion.
    But the system alert me: This component can't install in this system, it's for older operative system.
    What's I can do?
    I have a iMac, with OS X Lion too, but it's not fomated. Before it was installed MPEG-2 Component, and I can use software perfectly.
    For example, Can I transfer codec MPEG-2 from iMac to Macbook? Where's installed codec in my iMac?
    Thanks very much... and I'm sorry for my english...

    You can do in the System Preferences pane, but there is another way: position the mouse pointer on the dividing line between files and applications and drag up or down.

  • Can't Install Quicktime While Installing iTunes

    Whenever I try to install QuickTime in the iTunes installation, QuickTime fails to install and I get the following error message:
    QuickTime Installation Failed:
    Error Code: -3
    As we all know, no QuickTime, no iTunes. Can anyone help?
    Thanks!

    Try this
    I deleted the iTunes folder in MyDocuments/MyMusic (renaming iTunes.old instead of deleting will preserve files)and re-installed and everything appears to work.
    http://discussions.apple.com/thread.jspa?messageID=1817571&#1817571
    Then you can put your music back in the iTunes folder once it gets installed OK.

  • HT1926 can't install quicktime or itunes on windows 7 get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run

    please help. Can't install quictime player or itunes on windows 7. Get the error message There is a problem with the windows installer package. A program required for this install to complete could not be run. Have followed all the steps suggested and still no luck.

    thank you for trying to help. I do not have apple software update on my computer. I have tried to install several programs so i could install it but every installation will not finish and rolls back and says no changes were made to my computer so i can't install the update. I even tried to force install as administrator but nothing works. Any help would be greatly appreciated. I have windows 7 64 bit.

  • Can't install Quicktime on Windows 7

    Whenever I try to install Quicktime, I get the following error message:
    "Quicktime Installer Completed
    The installer encountered errors before the requested operations for Quicktime could be completed.
    To retry these operations at a later time, please run the installer again."
    I tried running the installer in Safe Mode, and I deleted the C:\Users\MyName\AppData\Local\Temp directory.  The error persists.
    Any idea what's causing this behavior?
    Sam.

    I agree.  I have wasted two days trying to get this problem figured out, and have been told when I call support that it does not work with Quicktime anymore.
    My problem is that on my computer, the 'Apple Application Support' isn't being recognized and is creating an error half way through the install. I have tried everything to fix or work around the problem - spent time reading I don't know how may forums.  Even cleaned out my registry, among other things.  Ended up doing a system restore this morning to start again at square one.
    Now, I am on my daughter's computer, which has Quick Time installed but isn't registered. After having deleted all of Quicktime from my computer, using Revo and a restore, I have tried to put the registration number I paid for yesterday into this Quicktime. It won't work - I am unable to use Quicktime Pro on either computer, and Apple Support doesn't give a rip.  They have taken my money and will not ensure the use of the product.

  • Can't Install Quicktime for Firefox under W2K

    I am unable to install Quicktime with Firefox. I am running W2K.
    The current version doesn't support Quicktime. I'm not able to find a version that does.
    Any suggestions?
    Fred

    http://www.apple.com/support/quicktime/
    Click the "Older versions" link and search for 7.1.6. I believe it is the last version to run on your OS.

  • Can't install quicktime 7 please help!

    I installed the newest itune (7) yesterday and tried to install quicktime 7 on my g4 cube. I am running tiger and quicktime 7 will not install. It keeps saying try again later. I have repaired all permissions, restarted the computer, but still will not insatll. PLEASE HELP!

    rather than running the Installation "online", try downloading and saving a copy of the installer to your hard drive (the desktop is a fine location) and then running the install from there by doubleclicking the QuickTimeInstaller.exe file.
    Does that install go through any better?

  • Can't install quicktime pro

    i have quicktime 7.6.8 and am trying to install quicktime pro. i'm on a vista computer, cannot figure out how to do this. help! thanks.

    Open QuickTime Player and then click "Register" (Edit menu).
    Enter your name and number from the email confirmation.
    Use copy/paste to avoid errors.

  • Can't install Quicktime or Itunes

    I'm having a complete difficult time with this.
    I've tried to install "iTunes + Quicktime" about 20 times now.
    It says Quicktime installation messed up and iTunes can't work without Quicktime and quit.
    So I get the stand alone version of Quicktime and try to install that.
    I get "The installer encountered errors before the requested operations for QuiicktTime could be completed" Then it tells me to retry.
    I've done everything I've read. I've tried Windows Install Clean Up, but iTunes nor Quicktime is in there, the only thing that is "Apple Application Support"
    I've deleted all the apple and quicktime registry entries I found, I've deleted anything reffering to either apple or quicktime.
    I've reinstalled vbscript.
    I'm out of ideas.
    I've spent hours googling this now and nothings worked.
    The Operating System I'm installing it on is Windows XP.
    Someone please help.

    Excellent news!
    Strange how sometimes the fixit works better than the manual methods, and sometimes the manual methods work better than the fixit. It differs from Microsoft fixit to Microsoft fixit too. (Unfortunately, because these "anomalous 2738s" are pretty rare as install errors go, I don't have a good feel yet for whether or not it's the fixit or the manual method that's more likely to work in iTunes/QuickTime installation contexts.)
    Afraid I'm not very good on earbud troubleshooting, but fingers crossed the folks over at the iPod communities might be able to help:
    https://discussions.apple.com/community/ipod

Maybe you are looking for

  • Error when trying to open iTunes

    I just got a new harddrive and the first time that I went to access my iTunes library it worked. Now when I go to open it I get the message : The iTunes Library.itl file is locked, on a locked disk, or you do not have write permission for this file.

  • Spliting a clip

    How can I split a clip that I transfer from vhs through digi cam to my computer. I have a 52 minute clip and want to split the clip to three parts or more.

  • Sapinst /usr/lib/hpux64/dld.so: Unable to find library 'libclntsh.so.10.1'

    Hi Using Oracle 10.2 , HP-UX 11.23, ECC 6.0 SR3. I am running sapinst with homogeneous system copy option. Database already restored and opened properly. Getting error during backup/restore step -creating the password file. Looking at the sapinst log

  • Transaction code for searching workflow id's

    Hi Experts, I am new to the work flow.  I am have one issue in workflow. i know the employee USERID. I want to find out workflow ID's of this employee. Please tell me how can i search all workflow id's . Is there any Transaction code. Thank you Sri

  • How to make tcp have establish option's function or reflexive in ASA like icmp have echo reply

    how to make tcp have establish option's function or reflexive in ASA like icmp have echo reply rather than permit tcp in both side