I can't install Solaris 10 on my Acer Aspire 2920

When I try to install Solaris 10 8/07 on my Acer Aspire 2920 after selecting the type of the console (Solaris) on my computer starts an endless cycle reboot.
the specifications of my lap are:
Processor: Intel Core 2 Duo processor T5450
Ram : 3 GB DDR2
250 GB HDD
I wonder if someone could help me. Thanks in advanced

At the [Solaris Site|http://www.sun.com/software/solaris/get.jsp] , there are some links to tools to test your system for compatibility with Solaris10. Look for the tools at the System Requirements link.

Similar Messages

  • Install Windows 10 on Acer Aspire v5 573g

    Can i install Windows 10 on Acer Aspire v5 573g Laptop ?

    Why not? remember to update and not clean install or you will loose authentication of windows 10.

  • We can't install Solaris 8 - IBM PC SERVER 315

    Hello:
    We are trying to install Solaris 8 (Intel) (02/02) in an IBM PC Server 315.
    Some words about it:
    - 128 Mb RAM
    - Pentium Pro 200 Mhz
    - Adaptec AHA-2940U/2940UW Ultra SCSI in PCI bus1,Slot 4 (Info from Solaris install) (Target 7)
    - Hard Disk IBM SCSI (Target 0)
    - CD-Rom SCSI IBM CDRM00203 (Target 6 of SCSI) (info from Solaris install)
    We have a big problem.
    We can't install Solaris from CD.
    After Loading kernel , when it begins Searching /dev and /devices...we see this text in the screen repeated a lot of times:
    WARNING: /pci@0,0/pci1011,24@2/pci9004,8178@1(adp0):
    timeout: abort device, target=6 lun=0
    And before this something like it has some problem and begins a resinc ??
    Please Could you help us?
    Solaris has been purchased from Sun on 12 March 2002
    A lot of Thank's!
    P.D: Please, excuse my poor English.
    A lot of thank's.

    two other severs wouldn't run the cd either? Break it down a little it will be more solvable. We will create two separate problems with this. First we will check the cd disk itself. Put in another system and install solaris. If that works, move to the cdrom drive....move it to the same computer you just installed solaris on...if it works then it is another problem.

  • Can't install itunes on an acer laptop, windows 7, any uselful ideas???

    Can't install itunes on an acer laptop, windows 7, any uselful ideas???

    http://support.apple.com/kb/HT1926

  • How can i install solaris 8

    i,m new in this,how can i install solaris on a machinne ronning winxp,win2k adv server,
    what is the appropiate file system,where can i get a free installation guide for this.
    thank you for your great help.

    docs.sun.com is good place to find any type of documentation related to sun/solaris .Also you can find a article on solaris installation on my website .
    Hemant
    http://www.adminschoice.com

  • Can I install Solaris 8 without Swap space?

    Can I install Solaris 8 without swap space? or Can I install the swap space on a different hard drive?

    Refer Solaris 8 installation guide manuals from this URL:
    http://docs.sun.com:80/ab2/coll.214.7/@Ab2CollView?Ab2Lang=C&Ab2Enc=iso-8859-1
    Thanks,
    Senthilkumar
    Developer Technical Support
    http://www.sun.com/developers/support

  • Help! Can'i install Solaris 9 on Dell Laptitude LS

    Can'i install Solaris 9 on Dell Laptitude LS. Setting of video card and monitor fail.
    My configuration is:
    P3 450
    128MB
    MagicMedia 256 AV video and sound card.
    Monitor unknown with 800*600 resolution.
    Anyone has idea about that. Thanks!

    Yes, OS 9 is PPC architecture only. The only way I can think of that you could possibly run it would be to download PearPC (A PPC architecture emulator-http://pearpc.sourceforge.net/) off of Windows (which is officially unsupported on Apple machines to begin with), and then attempt to run OS 9 off of PearPC.
    The program is rather slow, and as you can see, the process is really quite time consuming, illogical (three different systems, one running in emulation), and definitely not worth the end result.
    Good Luck,
    DV Guru

  • SPARC v240 can i install Solaris 10 and free Radius proxy software?

    On a SPARC v240 can i install Solaris 10 and free Radius proxy software?

    No, the patch was created on top of Solaris 10 packages. The patchadd utility requires that the VERSION strings match between the installed package's pkginfo file and the pkginfo files inside the patch. Unless the base package did not change between Solaris 9 and Solaris 10, the patch will not get applied because of the VERSION mismatch. But it is very unlikely that the packages did not change between the two releases.
    Even if you were to be able to install it, there could be dependencies that the patch's binaries have on other Solaris 10 binaries.
    -- Alan

  • Installing Solaris 8 on Acer Travelmate 330T

    I can't configure my Acer Travelmate 330T, which had Windows 98SE installed, to run Solaris 8. There are a few problems:-
    1. The installation procedure will come to a point where it asked whether I want the program to fdisk cd0f0. If I answered YES, my Windows 98 is gone for good. If I answered NO, the installation stops. Does anyone have the solutions for this? Please advise (as I desperately need to dual boot with Windows and Solaris 8).
    2. I tried installing Solaris 8 into a brand new harddisk using the same laptop. I selected YES to the above fdisk question. Everything went on well (I supposed so). However, when it reach the stage of configuring the video display drivers, I was stucked there. My laptop has a Trident display card with 2.5MB of RAM and a 12.1" LCD monitor. I can't find the name of my laptop's display adaptor in the list. I tried a few combinations but all failed. Can anyone please help?
    Thanks.

    Hi,
    Check your motherboard and other hardware devices are
    supported by intel Solaris x86 or not.
    Check your hardware compatibility list try this URL:
    http://soldc.sun.com/support/drivers/hcl
    Revert back.
    Thanks & Regards,
    Senthilkumar
    SUN - DTSHello Senthil
    I have contacted Dell for the motherboard model number, but they were not able to provide the number (strange)
    The URL you gave, does not have my DELL OPTIPLEX GX400 listed as this is a relavitvely new model, however the older system in the same series are shown to be comaptible.
    Chip set
    Intel 850 Peripheral Component Interconnect (PCI)/accelerated graphics port (AGP)
    Data bus width64 bits
    Address bus width
    32 bits
    Direct memory access (DMA)
    channels
    eight
    Interrupt levels
    15
    BIOS chip
    4 megabits (Mb)
    System bus speed
    100 megahertz (MHz) clock, 400 MHz data rate

  • Can I install solaris on a second hard drive?

    I am completely new to Solaris. My computer runs Windows XP as its primary OS and I have a second (slave) hard drive that I would like to install Solaris 10 on. Does the installation DVD for x64 architecture automatically handle this kind of installation? Is this process possible? If it is, will I have to manually configure the BIOS to boot each OS every time I change my current OS, or will some sort of GUI dialogue come up? I would like information on this subject and if possible, step-by-step instructions.

    Tottaly agree with the last post. Check if your hardware is in HCL, there is a free program you can download from Sun Download page, you burn it to CD and reboot, then it will provide you with all needed information. And if something is not in the list, you will get a hard time seting it up (there are a lot of unofficial drivers). So as an example: networkcard will be hard to install and set up. So check first.
    As from my experiense conserning instalation, I would suggest to do so:
    (in a way as the last post)
    prepare a clean partition, or backup files on a HD. run the instalation, once you will reach the point when it will ask you how to install (Normal or Custom) choose custom, then it will go to several questions concerning where on a HD to install, thats where you can choose partitions and so on.
    Just as a reminder: you dont need alot of space for Solaris to work properly, plus there not so much software which requires big amount of HD. So for OS and nice package for development you will probably need tops 10Gb.

  • I can't install Solaris 11

    Hi.
    I want to using Solaris 11 too, but i can't install it. My computer is form MEDION company, model: B818/3. After 99% of GUI installation my computer told me that he can't finish.
    What can I do? I get that log(sorry if it' s too long):
    2012-03-31 16:54:13,720 InstallationLogger INFO **** START ****
    2012-03-31 16:54:14,056 InstallationLogger INFO Loading GLADE files...
    2012-03-31 16:54:14,286 InstallationLogger INFO Done loading GLADE files.
    PROGRESS REPORT: progress percent:0 Preparing for Installation
    2012-03-31 16:54:14,554 InstallationLogger INFO Initial screen is screen [0] [Welcome Screen]
    2012-03-31 16:54:19,191 InstallationLogger INFO Next screen is screen [1] [Disk Screen]
    PROGRESS REPORT: progress percent:100 TargetDiscovery completed.
    2012-03-31 16:54:53,952 InstallationLogger INFO TD XML:
    <target name="discovered">
    <disk whole_disk="false">
    <disk_name name="c4t0d0" name_type="ctd"/>
    <disk_prop dev_type="usb" dev_vendor="Lexar" dev_size="15663104secs"/>
    <partition action="preserve" name="1" part_type="7">
    <size val="15661056secs" start_sector="2048"/>
    </partition>
    </disk>
    <disk whole_disk="false">
    <disk_name name="c5t0d0" name_type="ctd"/>
    <disk_prop dev_type="sata" dev_vendor="ST31000528AS" dev_size="1953504000secs"/>
    <disk_keyword key="boot_disk"/>
    <partition action="preserve" name="1" part_type="130">
    <size val="4206592secs" start_sector="2048"/>
    </partition>
    <partition action="preserve" name="2" part_type="131">
    <size val="41945088secs" start_sector="4208640"/>
    </partition>
    <partition action="preserve" name="3" part_type="131">
    <size val="1907369984secs" start_sector="46153728"/>
    </partition>
    </disk>
    <logical noswap="true" nodump="true"/>
    </target>
    2012-03-31 16:54:53,952 InstallationLogger INFO TD found 2 disks
    2012-03-31 16:54:53,959 InstallationLogger INFO TD FINISHED SUCCESSFULLY!
    2012-03-31 16:54:53,960 InstallationLogger INFO Disk [c5t0d0] selected
    2012-03-31 16:54:54,327 InstallationLogger INFO Disk [c5t0d0] selected
    2012-03-31 16:54:54,346 InstallationLogger INFO Disk [c5t0d0] selected
    2012-03-31 16:55:03,192 InstallationLogger INFO Disk [c4t0d0] selected
    2012-03-31 16:55:05,422 InstallationLogger INFO Disk [c4t0d0] selected
    2012-03-31 16:55:09,293 InstallationLogger INFO Starting validation.
    2012-03-31 16:55:09,293 InstallationLogger INFO Disk layout after tidy up:
                        -> [disk] (Disk: ctd=c4t0d0; volid=None; devpath=/pci@0,0/pci1462,7707@1d/hub@1/storage@7/disk@0,0; devid=None; prop:dev_type=usb; prop:dev_vendor=Lexar; prop:dev_size=7.47gb; is_cdrom=False; label=VTOC; in_zpool=rpool; in_vdev=vdev; whole_disk=False; write_cache=False)
                             -> [1] (Partition: name=1; action=preserve; part_type=7; size=7.47gb; start_sector=2048; bootid=0; is_linux_swap=False)
    2012-03-31 16:55:09,293 InstallationLogger INFO Creating slice 0 on Solaris2 partition.
    2012-03-31 16:55:09,300 InstallationLogger INFO New Slice 0:                          -> [0] (Slice: name=0; action=create, force=False, is_swap=False, tag=2, flag=0; in_zpool=rpool; in_vdev=vdev; size=7.46gb; start_sector=4096)
    2012-03-31 16:55:09,305 InstallationLogger INFO Performing Target.final_validation().
    2012-03-31 16:55:09,309 InstallationLogger INFO final_validation passed.
    2012-03-31 16:55:09,310 InstallationLogger INFO Validation succeeded. Desired Targets in DOC:
    <target name="desired">
    <disk whole_disk="false">
    <disk_name name="c4t0d0" name_type="ctd"/>
    <disk_prop dev_type="usb" dev_vendor="Lexar" dev_size="15663104secs"/>
    <partition action="create" name="1" part_type="191">
    <size val="15659008secs" start_sector="4096"/>
    <slice name="0" action="create" force="false" is_swap="false" in_zpool="rpool" in_vdev="vdev">
    <size val="15646720secs" start_sector="4096"/>
    </slice>
    </partition>
    </disk>
    <logical noswap="false" nodump="false">
    <zpool name="rpool" action="create" is_root="true">
    <vdev name="vdev" redundancy="none"/>
    <be name="solaris"/>
    <zvol name="swap" action="create" use="swap">
    <size val="793m"/>
    </zvol>
    <zvol name="dump" action="create" use="dump">
    <size val="198m"/>
    </zvol>
    <filesystem name="export" action="create" mountpoint="/export" in_be="false"/>
    <filesystem name="export/home" action="create" in_be="false"/>
    </zpool>
    </logical>
    </target>
    2012-03-31 16:55:09,310 InstallationLogger INFO Next screen is screen [2] [TimeZone Screen]
    2012-03-31 18:55:24,782 InstallationLogger INFO Running command: ['/usr/bin/date', '033118552012.24']
    2012-03-31 18:55:24,016 InstallationLogger INFO Next screen is screen [3] [User Screen]
    2012-03-31 18:55:36,058 InstallationLogger INFO Next screen is screen [4] [Confirmation Screen]
    2012-03-31 18:55:36,061 InstallationLogger INFO **** Install Details ****
    2012-03-31 18:55:36,061 InstallationLogger INFO -- Disk --
    2012-03-31 18:55:36,064 InstallationLogger INFO      7.5 GB partition on 7.5 GB disk (c4t0d0) This partition will be erased
    2012-03-31 18:55:36,065 InstallationLogger INFO      The whole installation will take up 5.0 GB hard disk space.
    2012-03-31 18:55:36,065 InstallationLogger INFO -- Software --
    2012-03-31 18:55:36,065 InstallationLogger INFO      Oracle Solaris
    2012-03-31 18:55:36,066 InstallationLogger INFO -- Timezone --
    2012-03-31 18:55:36,066 InstallationLogger INFO      Poland
    2012-03-31 18:55:36,066 InstallationLogger INFO -- Locale --
    2012-03-31 18:55:36,066 InstallationLogger INFO      Default Language: en_US.UTF-8
    2012-03-31 18:55:36,067 InstallationLogger INFO      Language Support: United States
    2012-03-31 18:55:36,067 InstallationLogger INFO -- Users --
    2012-03-31 18:55:36,067 InstallationLogger INFO      User Account: wyciu
    2012-03-31 18:55:36,067 InstallationLogger INFO      Root Password: Same as user account.
    2012-03-31 18:55:36,068 InstallationLogger INFO      Host name: solaris
    2012-03-31 18:55:37,734 InstallationLogger INFO Next screen is screen [5] [Progress Screen]
    PROGRESS REPORT: progress percent:0 Preparing for Installation
    PROGRESS REPORT: progress percent:100 PrepareTransfer completed.
    2012-03-31 18:55:38,699 InstallationLogger INFO Setting up software to install/uninstall
    2012-03-31 18:55:38,700 InstallationLogger.sysconfig INFO Opening keyboard device: /dev/kbd
    2012-03-31 18:55:38,701 InstallationLogger.sysconfig INFO Detected following current keyboard layout: Polish
    2012-03-31 18:55:38,702 InstallationLogger.sysconfig INFO console type: Physical Console
    PROGRESS REPORT: progress percent:0 Preparing for Installation
    2012-03-31 18:55:38,717 InstallationLogger INFO Install Started
    PROGRESS REPORT: progress percent:0 Preparing for Installation
    PROGRESS REPORT: progress percent:0 Preparing for Installation
    PROGRESS REPORT: progress percent:1 Preparing for Installation
    PROGRESS REPORT: progress percent:1 Preparing for Installation
    PROGRESS REPORT: progress percent:1 Preparing for Installation
    PROGRESS REPORT: progress percent:2 Preparing for Installation
    PROGRESS REPORT: progress percent:2 Preparing for Installation
    PROGRESS REPORT: progress percent:2 Preparing for Installation
    PROGRESS REPORT: progress percent:3 Preparing for Installation
    PROGRESS REPORT: progress percent:3 Preparing for Installation
    PROGRESS REPORT: progress percent:3 Preparing for Installation
    PROGRESS REPORT: progress percent:4 Preparing for Installation
    PROGRESS REPORT: progress percent:4 Preparing for Installation
    PROGRESS REPORT: progress percent:5 VarSharedDataset completed.
    PROGRESS REPORT: progress percent:5 TargetInitialization completed.
    2012-03-31 18:56:05,064 InstallationLogger.transfer-root INFO === Executing transfer-root Checkpoint ===
    PROGRESS REPORT: progress percent:5 Beginning CPIO transfer
    2012-03-31 18:57:04,663 InstallationLogger.transfer-root INFO Transferring files to /a
    PROGRESS REPORT: progress percent:5 Transferring contents
    PROGRESS REPORT: progress percent:5 Transferring contents
    PROGRESS REPORT: progress percent:6 Transferring contents
    PROGRESS REPORT: progress percent:7 Transferring contents
    PROGRESS REPORT: progress percent:8 Transferring contents
    PROGRESS REPORT: progress percent:9 Transferring contents
    PROGRESS REPORT: progress percent:10 Transferring contents
    2012-03-31 18:57:36,656 InstallationLogger.transfer-root INFO Transferring files to /a
    PROGRESS REPORT: progress percent:10 Transferring contents
    PROGRESS REPORT: progress percent:11 Transferring contents
    PROGRESS REPORT: progress percent:12 Transferring contents
    PROGRESS REPORT: progress percent:13 Transferring contents
    PROGRESS REPORT: progress percent:14 Transferring contents
    PROGRESS REPORT: progress percent:15 Transferring contents
    PROGRESS REPORT: progress percent:15 Transferring contents
    PROGRESS REPORT: progress percent:16 Transferring contents
    PROGRESS REPORT: progress percent:17 Transferring contents
    PROGRESS REPORT: progress percent:18 Transferring contents
    PROGRESS REPORT: progress percent:19 Transferring contents
    PROGRESS REPORT: progress percent:20 Transferring contents
    PROGRESS REPORT: progress percent:20 Transferring contents
    PROGRESS REPORT: progress percent:21 Transferring contents
    PROGRESS REPORT: progress percent:22 Transferring contents
    PROGRESS REPORT: progress percent:23 Transferring contents
    PROGRESS REPORT: progress percent:24 Transferring contents
    PROGRESS REPORT: progress percent:25 Transferring contents
    PROGRESS REPORT: progress percent:25 Transferring contents
    PROGRESS REPORT: progress percent:26 Transferring contents
    PROGRESS REPORT: progress percent:27 Transferring contents
    PROGRESS REPORT: progress percent:28 Transferring contents
    PROGRESS REPORT: progress percent:29 Transferring contents
    PROGRESS REPORT: progress percent:30 Transferring contents
    PROGRESS REPORT: progress percent:30 Transferring contents
    PROGRESS REPORT: progress percent:31 Transferring contents
    PROGRESS REPORT: progress percent:32 Transferring contents
    PROGRESS REPORT: progress percent:33 Transferring contents
    PROGRESS REPORT: progress percent:34 Transferring contents
    PROGRESS REPORT: progress percent:35 Transferring contents
    PROGRESS REPORT: progress percent:35 Transferring contents
    PROGRESS REPORT: progress percent:36 Transferring contents
    PROGRESS REPORT: progress percent:37 Transferring contents
    PROGRESS REPORT: progress percent:38 Transferring contents
    PROGRESS REPORT: progress percent:39 Transferring contents
    PROGRESS REPORT: progress percent:40 Transferring contents
    PROGRESS REPORT: progress percent:40 Transferring contents
    PROGRESS REPORT: progress percent:41 Transferring contents
    PROGRESS REPORT: progress percent:42 Transferring contents
    PROGRESS REPORT: progress percent:43 Transferring contents
    PROGRESS REPORT: progress percent:44 Transferring contents
    PROGRESS REPORT: progress percent:45 Transferring contents
    PROGRESS REPORT: progress percent:45 Transferring contents
    PROGRESS REPORT: progress percent:46 Transferring contents
    PROGRESS REPORT: progress percent:47 Transferring contents
    PROGRESS REPORT: progress percent:48 Transferring contents
    PROGRESS REPORT: progress percent:49 Transferring contents
    PROGRESS REPORT: progress percent:50 Transferring contents
    PROGRESS REPORT: progress percent:50 Transferring contents
    PROGRESS REPORT: progress percent:51 Transferring contents
    PROGRESS REPORT: progress percent:52 Transferring contents
    PROGRESS REPORT: progress percent:53 Transferring contents
    PROGRESS REPORT: progress percent:54 Transferring contents
    PROGRESS REPORT: progress percent:55 Transferring contents
    PROGRESS REPORT: progress percent:55 Transferring contents
    PROGRESS REPORT: progress percent:56 Transferring contents
    PROGRESS REPORT: progress percent:57 Transferring contents
    PROGRESS REPORT: progress percent:58 Transferring contents
    PROGRESS REPORT: progress percent:59 Transferring contents
    PROGRESS REPORT: progress percent:60 Transferring contents
    PROGRESS REPORT: progress percent:60 Transferring contents
    PROGRESS REPORT: progress percent:61 Transferring contents
    PROGRESS REPORT: progress percent:62 Transferring contents
    PROGRESS REPORT: progress percent:63 Transferring contents
    PROGRESS REPORT: progress percent:64 Transferring contents
    PROGRESS REPORT: progress percent:65 Transferring contents
    PROGRESS REPORT: progress percent:66 Transferring contents
    PROGRESS REPORT: progress percent:66 Transferring contents
    PROGRESS REPORT: progress percent:67 Transferring contents
    PROGRESS REPORT: progress percent:68 Transferring contents
    PROGRESS REPORT: progress percent:69 Transferring contents
    PROGRESS REPORT: progress percent:70 Transferring contents
    PROGRESS REPORT: progress percent:71 Transferring contents
    PROGRESS REPORT: progress percent:71 Transferring contents
    PROGRESS REPORT: progress percent:72 Transferring contents
    PROGRESS REPORT: progress percent:73 Transferring contents
    PROGRESS REPORT: progress percent:74 Transferring contents
    PROGRESS REPORT: progress percent:75 Transferring contents
    PROGRESS REPORT: progress percent:76 Transferring contents
    PROGRESS REPORT: progress percent:76 Transferring contents
    PROGRESS REPORT: progress percent:77 Transferring contents
    PROGRESS REPORT: progress percent:78 Transferring contents
    PROGRESS REPORT: progress percent:79 Transferring contents
    PROGRESS REPORT: progress percent:80 Transferring contents
    PROGRESS REPORT: progress percent:81 Transferring contents
    PROGRESS REPORT: progress percent:81 Transferring contents
    PROGRESS REPORT: progress percent:82 Transferring contents
    PROGRESS REPORT: progress percent:83 Transferring contents
    PROGRESS REPORT: progress percent:84 Transferring contents
    PROGRESS REPORT: progress percent:85 Transferring contents
    PROGRESS REPORT: progress percent:86 Transferring contents
    PROGRESS REPORT: progress percent:86 Transferring contents
    PROGRESS REPORT: progress percent:87 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    2012-03-31 19:11:57,136 InstallationLogger.transfer-root INFO Transferring files to /a
    2012-03-31 19:12:18,346 InstallationLogger.transfer-misc INFO === Executing transfer-misc Checkpoint ===
    PROGRESS REPORT: progress percent:88 Beginning CPIO transfer
    2012-03-31 19:12:19,838 InstallationLogger.transfer-misc INFO Transferring files to /a
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:88 Transferring contents
    PROGRESS REPORT: progress percent:89 Transferring contents
    PROGRESS REPORT: progress percent:89 Transferring contents
    PROGRESS REPORT: progress percent:89 Transferring contents
    PROGRESS REPORT: progress percent:89 Transferring contents
    PROGRESS REPORT: progress percent:89 Transferring contents
    PROGRESS REPORT: progress percent:89 Transferring contents
    PROGRESS REPORT: progress percent:89 Transferring contents
    PROGRESS REPORT: progress percent:98 transfer-misc completed.
    2012-03-31 19:14:26,988 InstallationLogger.transfer-media INFO === Executing transfer-media Checkpoint ===
    PROGRESS REPORT: progress percent:99 Beginning CPIO transfer
    2012-03-31 19:14:28,071 InstallationLogger.transfer-media INFO Transferring files to /a
    PROGRESS REPORT: progress percent:99 Transferring contents
    PROGRESS REPORT: progress percent:99 Transferring contents
    PROGRESS REPORT: progress percent:99 Transferring contents
    PROGRESS REPORT: progress percent:99 Transferring contents
    2012-03-31 19:14:49,174 InstallationLogger ERROR Error occurred during execution of 'generate-sc-profile' checkpoint.
    Traceback (most recent call last):
    File "/usr/lib/python2.6/vendor-packages/solaris_install/engine/__init__.py", line 811, in executecheckpoints
    checkpoint.execute(dry_run)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/manifest/writer.py", line 276, in execute
    self.write(doc)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/manifest/writer.py", line 173, in write
    xml = doc.generate_xml_manifest()
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/cache.py", line 380, in generate_xml_manifest
    return self.get_xml_tree()
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/__init__.py", line 572, in get_xml_tree
    return self.__create_xml_tree(None)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/__init__.py", line 553, in __create_xml_tree
    sub = child.__create_xml_tree(attach_to)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/__init__.py", line 553, in __create_xml_tree
    sub = child.__create_xml_tree(attach_to)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/__init__.py", line 532, in __create_xml_tree
    element = self.to_xml()
    File "/usr/lib/python2.6/vendor-packages/solaris_install/sysconfig/profile/__init__.py", line 148, in to_xml
    element.extend(self.users.to_xml())
    File "/usr/lib/python2.6/vendor-packages/solaris_install/sysconfig/profile/user_info.py", line 58, in to_xml
    return [smf_svc_config.get_xml_tree()]
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/__init__.py", line 572, in get_xml_tree
    return self.__create_xml_tree(None)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/__init__.py", line 553, in __create_xml_tree
    sub = child.__create_xml_tree(attach_to)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/__init__.py", line 553, in __create_xml_tree
    sub = child.__create_xml_tree(attach_to)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/__init__.py", line 553, in __create_xml_tree
    sub = child.__create_xml_tree(attach_to)
    File "/usr/lib/python2.6/vendor-packages/solaris_install/data_object/__init__.py", line 532, in __create_xml_tree
    element = self.to_xml()
    File "/usr/lib/python2.6/vendor-packages/solaris_install/sysconfig/profile/__init__.py", line 359, in to_xml
    element = etree.Element(self.tagname, **elem_kwargs)
    File "lxml.etree.pyx", line 2253, in lxml.etree.Element (src/lxml/lxml.etree.c:22649)
    File "apihelpers.pxi", line 143, in lxml.etree._makeElement (src/lxml/lxml.etree.c:29384)
    File "apihelpers.pxi", line 131, in lxml.etree._makeElement (src/lxml/lxml.etree.c:29278)
    File "apihelpers.pxi", line 247, in lxml.etree._initNodeAttributes (src/lxml/lxml.etree.c:30384)
    File "apihelpers.pxi", line 1136, in lxml.etree._utf8 (src/lxml/lxml.etree.c:37215)
    ValueError: All strings must be XML compatible: Unicode or ASCII, no NULL bytes
    2012-03-31 19:14:50,300 InstallationLogger ERROR ERROR: Execution FAILED
    2012-03-31 19:14:50,300 InstallationLogger ERROR Checkpoint [generate-sc-profile] logged error: [All strings must be XML compatible: Unicode or ASCII, no NULL bytes]
    2012-03-31 19:14:50,584 InstallationLogger INFO Next screen is screen [6] [Failure Screen]

    Hi Jarosław,
    This is a bug - thanks for pointing it out to us.
    It should accept the Real Name value "Jarosław" or at least
    stop you from proceeding if it cannot be used.
    I will investigate further and hopefully get this fixed.
    - Dermot

  • CAN I INSTALL SOLARIS 10 INTEL PLATFORM ON MY PC

    Can anybody guide me whether i can install solaris 10 intel platform on my pc having following configuration
    1. Processor = AMD SEMPRON 2500+ 64-BIT.
    2. MainBoard = ASUS K8V-MX.
    3. RAM-= 512 MB DDR PC3200
    4. Display = Onboard VIA/S3G Unichrome Pro IGP.
    5. LAN = Onboard VIA RHINE II Fast Ethernet Adapter.
    6. Monitor = 17" LG CRT, Model = Studioworks 700S
    7. Sony DVD- ROM.
    8. Samsung DVD-RW.
    9. HDD = 40 GB Samsung 7200 RPM.
    If anybody knows let me know at my e-mail [email protected]

    I don't think you will have many problems in this platform, but I'm not 100% sure.
    What I recommend you is to get the VMWare and try there. VMWare is a software where you can create a virtual machine running under windows. In this virtual machine you could install solaris 10 (and any other OS you want to test in your computer). I have my Solaris 10 running under VMWare with excellent results (Laptop with Intel Celeron processor)... where I have VMWare installed in Windows!

  • Can not install solaris 10 on dell Desktop

    Hi All,
    This is my first post. I am new to sun solaris. I am trying to install Solaris 10 (using DVD). while installation it came up with folllwing error.
    NO Disk found.
    check to make sure disks are cabled and powered up.on the same disk, windows VISTA installed and there 3 windows partition exists. I am just wondering if sun will required blank drive. or disk is not supprted.
    below is the link to see dell desktop tech spec.
    http://www.dell.com/content/products/productdetails.aspx/dimen_e520?c=us&cs=22&l=en&s=dfh
    Please advise...
    Regards,
    Hitesh

    Thanks Alan,
    I run this tool and here is the result. i am going try to setup in legacy mode to see if that works. Please advise is there any other way.
    OR,
    can you suggest any desktop machine which is fully supported. I checked the HCL list but coudnlt decide anythings. here is onf the site from where i can buy the PC. www.tigerdirect.ca.
    please advise.....
    Thank you!
    The table below displays the devices detected in your system along with the corresponding driver status in Solaris 10 10/08 on x86/x64 platforms.
    Number of devices without Solaris drivers: 1
         Solaris Driver 32-bit
         Solaris Driver 64-bit
         Device Type
         Vendor Name
         Device Name
    1
         No Solaris Driver
         No Solaris Driver
         Storage
         Intel Corporation
         82801 SATA RAID Controller
    2
         [W] Solaris Bundled Driver: audiohd
         [W] Solaris Bundled Driver: audiohd
         Multimedia
         Intel Corporation
         82801H (ICH8 Family) HD Audio Controller
    3
         Solaris Bundled Driver: e1000g
         Solaris Bundled Driver: e1000g
         Network
         Intel Corporation
         82562V 10/100 Network Connection
    4
         Solaris Bundled Driver: uhci
         Solaris Bundled Driver: uhci
         USB
         Intel Corporation
         82801H (ICH8 Family) USB UHCI Controller #1
    5
         Solaris Bundled Driver: uhci
         Solaris Bundled Driver: uhci
         USB
         Intel Corporation
         82801H (ICH8 Family) USB UHCI Controller #2
    6
         Solaris Bundled Driver: uhci
         Solaris Bundled Driver: uhci
         USB
         Intel Corporation
         82801H (ICH8 Family) USB UHCI Controller #3
    7
         Solaris Bundled Driver: uhci
         Solaris Bundled Driver: uhci
         USB
         Intel Corporation
         82801H (ICH8 Family) USB UHCI Controller #4
    8
         Solaris Bundled Driver: uhci
         Solaris Bundled Driver: uhci
         USB
         Intel Corporation
         82801H (ICH8 Family) USB UHCI Controller #5
    9
         Solaris Bundled Driver: ehci
         Solaris Bundled Driver: ehci
         USB
         Intel Corporation
         82801H (ICH8 Family) USB2 EHCI Controller #1
    10
         Solaris Bundled Driver: ehci
         Solaris Bundled Driver: ehci
         USB
         Intel Corporation
         82801H (ICH8 Family) USB2 EHCI Controller #2
    11
         Solaris Bundled Driver: * vgatext/ ** i810
         Solaris Bundled Driver: * vgatext/ ** i810
         Video
         Intel Corporation
         82G965 Integrated Graphics Controller
    [W]: Driver support for indicated device not guaranteed
    * Kernel video driver name; ** Xorg video driver name.
    Device Data of PCI Controllers
         Vendor ID
         Device ID
         Class Code
         Sub VID
         Sub DID
         Revision ID
    1
         8086      2822      00010400      1028      01dd      02
    2
         8086      284b      00040300      1028      01dd      02
    3
         8086      104c      00020000      1028      01dd      02
    4
         8086      2830      000c0300      1028      01dd      02
    5
         8086      2831      000c0300      1028      01dd      02
    6
         8086      2832      000c0300      1028      01dd      02
    7
         8086      2834      000c0300      1028      01dd      02
    8
         8086      2835      000c0300      1028      01dd      02
    9
         8086      2836      000c0320      1028      01dd      02
    10
         8086      283a      000c0320      1028      01dd      02
    11
         8086      29a2      00030000      1028      01dd      02

  • Can't install Solaris 10 on Parallels

    I want to use Solaris 10 to develop applications, but I want to keep Windows. I thought about using Parallels. I bought and installed it, and I downloaded all of the 5 Solaris 10 for x64 iso's. I am trying to install it on Parallels, with the guest OS selected as Solaris 10 (of course), and I am setting it to boot from the first disc ISO. I get these following screens- the Parallels start screen (screenshot at http://www.freewebs.com/fourt/0.jpg ), followed by the Solaris boot screen (screenshot at http://www.freewebs.com/fourt/1.jpg ). Then I select Solaris, and get the following screens- (screenshot at http://www.freewebs.com/fourt/2.jpg ). Then, the underscore at the end is replaced by the text "Detecting Devices", and then a whole bunch of text pops up on the screen which goes down to the bottom, and this is the ending screen (screenshot at http://www.freewebs.com/fourt/3.jpg ). After that, from the Solaris 10 installation instructions, it says I should get another option screen, but it just returns to the Parallels start screen that we got in the beginning. The whole set of screens then starts again. I have selected the other Solaris boot options, but with the same result. I am using the x64/x86 CD's, and I have tried the SPARC CD's without it even recognizing it as a boot CD.
    As an ending note, I know in the screenshots it looks like I have Windows Vista, but I am running Windows XP SP2 with some design changes to make it look like Vista.
    Thank you in advance for your assistance, and if there is any other information I can give you, I would be happy to oblige.

    Hi, I had a similar problem when I tried to Install Solaris X86 on an HP Proliant DL586g2. You'll probably find the problem Is that you need to Install some drivers first to enable the Installation. If you need more specific details I can probably find a guide on how to do this. But I'm certain It Is possible to run Solaris on the Dell It just might take a bit of perseverance.
    Good luck

  • Can't install Solaris 10 on DELL VOSOTRO 200 ?

    Hi All,
    I am new to SOLARIS, and wanted to play with it.
    I tried to install Solaris 10 ON dell VOSOTRO 200 and it does not install at all. It gets stuck at the very first place. I tried open solaris and Solaris in all different ways, CD/DVD/USB.
    I used the same CD/DVD in Emachine and they get install just fine. Is solaris not compatible to DELL VOSOTRO? Or am I doing something wrong ?
    Any answer would be appreciated.
    Thanks,
    Envrionment
    SOLARIS 10, 32 Bit.
    DELL VOSOTRO 200
    Thanks,
    jfk

    Hi, I had a similar problem when I tried to Install Solaris X86 on an HP Proliant DL586g2. You'll probably find the problem Is that you need to Install some drivers first to enable the Installation. If you need more specific details I can probably find a guide on how to do this. But I'm certain It Is possible to run Solaris on the Dell It just might take a bit of perseverance.
    Good luck

Maybe you are looking for

  • BI Publisher in OBIEE 11G

    Hi I have few doubts in regard to BI Publisher in OBIEE 11G. Here they goes 1) Is it required to install BI Publisher separately or is it already provided integrated in fusion middleware in OBIEE 11G. 2) What is the process to integrate BI Publisher

  • Can't install plugins from exchange panel in PS CC!

    I tried to install some plugins from the exchange panel inside PS cc, it downloads the addin, but when it starts the extension manager, there is an error -1 after some time it tries to install them...!

  • Allow copy and paste from word to my school program

    When I create a word document and attempt to copy and paste it into my college discussion board, it states that Mozilla does not allow me to do so and to contact firefox to release the restrictions.

  • TDMS - System Analysis Phase completed with errors

    Hi All, We are running TDMS copy, currently running at System Analysis phase, however we encountered status message "completed with error" within sub-step "Generation of Run-Time Objects for Data Transfer". When we checked the tasks, we found below e

  • Why does my Premiere Pro CC always crash?

    I am having the same issues - constant crashing of Premiere Pro CC. Crashes during edits - crashes in exports. Mostly is just hangs and is in the dreaded "not responding" mode. I run a small independent production business and never experienced this