I can't install the drivers on Satellite A665

Hi every body,
I have a problem with my new Satellite A665 laptop.
I downloaded TV tuner driver but I can't install it on my computer but every time when Im trying to install it the computer ask me the security question and I agree on that.
After that the extraction for the installation file happened and suddenly something like owl pic appear for a moment and disappear after that without install anything.
The same thing happened when I tried to install the 3D staff that I downloaded from Toshiba site on my computer.
Can anyone help me?
Thank you

> I paied my new laptop and open its cartoon, and switch it on, and just click on next...next, after that the windows 7 start to work.
Exactly. Every new Toshiba notebook is preinstalled with Toshiba recovery image and this recovery image contains all necessary drivers, tools and utilities so it is not necessary to install anything.
>... I did't pay any CD and install the windows from it.
I dont understand this sentence. Fact is that new notebooks are delivered without any installations CD/DVD discs. You must create recovery DVD alone. How to do this is described in users manuals document. Check it out.
Sorry but I must ask you now: what is your problem now?

Similar Messages

I can't install the wireless on Satellite L40-14B

I can't install the wireless on this laptop. Was bought new with no software on it.
i tried all the drivers from this site recommended by Toshiba partner : http://aps2.toshiba-tro.de/wlan/?page=downloads
Intel PRO/Wireless 2100
Intel PRO/Wireless 2200/2915
Intel PRO/Wireless 3945/4965
Atheros Wireless LAN Adapter
this is the image with the device that is not instaled .. the only device .. i hope this is the wireless if not .. where is wireless divices ???
http://www.findjobuk.com/wireless/test.jpg
this is the device information :
USB\VID_0BDA&PID_819&REV_0200
USB\VID_0BDA&PID_819
I don't know what to do else ,
If anyone can help me.
Thanks

i installed the driver but isn't work yet.
I change the net8187b.inf
this :
USB\VID_0BDA&PID_8187&REV_0200
USB\VID_0BDA&PID_8189
to :
USB\VID_0BDA&PID_8197&REV_0200
USB\VID_0BDA&PID_8197
the instalation works ... and say that everything is working ok but when i turn wireless capability on say that the repair but the problem persist.
So i think i need another driver .. have any suggestions ? :)
Thanks Pedro i know about that code .. i found in some specification for L40 , but i didn't find anything on the internet ...
Also this laptop didnt' any system on it .. this why was so cheap. But no cd on it ...
Component List Satellite L40, Satellite Pro L 40, Equium L 40
Contents and Installation order
for Windows VISTA
1 Windows Vista RTM
2 Intel(R) Chipset Software Installation Utility V8.2.0.1014 (logo'd)
3 Intel 945GM/940GML Display Driver V7.14.10.1244 (logo'd)
4 Synaptics Luxpad & TouchPad Driver V9.1.23.11 (logo'd)
5 ADI Audio Driver(ADI 1986A) V6.10.1.6140 (logo'd)
6 TOSHIBA Software Modem SM2177ALD03
7 Realtek 8100CL Lan Driver V6.103.126.2007 (logo'd)
8 Atheros Wirless LAN Driver (Foxconn) v7.2.0.164
9 Atheros WirelessLAN 802.11a/g.g Driver v7.2.0.164
10 Realtek Wireless Lan Driver 6.1082.504.2007(logo'd)
11 RICOH(R5C847) V3.51.01(logo'd)
12 ATK Hotkey driver V1043.2.31.100 (logo'd)
13 ATK Hotkey utility V1012
14 TOSHIBA Accessibility 1.39.0.15
15 TOSHIBA SD Utilities v1.8.1.1
16 TOSHIBA Assist v2.00.03(For Philly10 Eng)
17 TOSHIBA ConfigFree v7.00.28
18 TOSHIBA Speech System v1.00.2512
19 Toshiba Extended Tiles for Windows Mobility Center V1.01
20 CD/DVD Acoustic Silencer v2.01.01
21 TOSHIBA DVD PLAYER V1.00.21A
Message was edited by: marius pascariuc

I installed bootcamp 4.0 4033, installed window 32 bit but can't install the drivers for some reason i keep getting error message. i have a macbook pro mid 2011 version. Please help

I installed bootcamp 4.0 4033 so that I can install windows 7 32 bit on my mac. Everything works fine until I try to install the drivers and I get an error message stating the version of windows does not work with the drivers I am trying to install. I have a feeling somehow I am downloading 64 bit drivers when I need 32 bit. I spoke to Apple and they said I can't use 32 bit windows.. but that is not what the support site says (it says I can as long as I use bootcamp 4, not 5). Also, my bootcamp assistant is version 5.. I have no idea if that matters. Help please.. been searching online for hours.

What model/year is your Macbook Pro? What operating system version?

I can't install the drivers from AppleMultiTouchTrackPadInstaller64 on WIndows 8.1 (Bootcamp dualboot)

When I try to install "AppleMultiTouchTrackPadInstaller64.exe" (Apple Multitouch (09/04/2013 5.0.20) and Apple Multitouch Mouse (09/11/2012 4.0.3.0)) on Windows 8.1 I get an install failed. As a result of this, I can't use right click (does not even work with a two finger click) or scrolling.
Note: I have a macbook pro retina 15 inch from late 2013. I used Bootcamp to install windows 8.1

@BobTheFisherman: "After installing Windows run the support software you downloaded and saved to your usb thumb drive. The support software contains the correct drivers for your computer's hardware including the trackpad etc." Have you even read the question details? I already tried to install to drivers support software from "\BootCamp\Drivers\" I even tried to download the latest drivers from the Apple website: Boot Camp Support Software 5.1.5621
But I get the "Install failed" error.
@Loner T: They don't have seem to have a different driver for Windows 8.1 See the description "Windows Support Software (Windows Drivers) you need to support 64 bit versions of Windows 7, Windows 8, and Windows 8.1 on your Mac."

I can't install the drivers for my Nom

I have Windows XP. We just got a Nomad, and I installed everything from the CD. As it went through the install, it would pop up a message that says "An error occured while setting up the driver." I've uninstalled and reinstalled the program 3 times, and have tried to download the drivers from this site several times, and every single timeI get that message.
Any ideas?

Surely you can't mean the original Nomad 32MB/64MB player? Or maybe a Nomad Jukebox?
Which model are you having trouble with?
PB

Where can I find the drivers for Satellite A135-S4677?

Where can I find drivers for Toshiba Satellite A135-S4677 for Windows XP Professional?

Hi!
Normally you can find the drivers on the Toshiba website:
http://www.csd.toshiba.com
I have checked the Toshiba website but I cant find drivers for WinXP so I think you must search on external websites for drivers like Intel, Realtek, etc.
Bye

Is the Dell 3115CN compatible with a Macbook Pro running Mountain Lion? If so, how can I install the drivers and install the printer on my mac?

I hace a Macbook Pro running Mountain Lion OS.... I need to print from time to time but don't have a new printer to go with my new macbook. Would a 3115CN work with it or no? If so, how can I set it up? Setting up a printer on a mac is a bit different from doing so on a windows machine and I am new to the macworld.
All help would be greatly appreciated.

Yes. I'm running this printer from 10.6 through 10.9 and it's worked fine with all versions. Dell released updated drivers a while ago that make it much easier to administer this printer.

[HELP] I can't install the bootcamp drivers on my mac.

Hello people.
I have a problem and i wish if you could help me with.
I have an iMac Early-2009 ( 2.66ghz C2D / 4GB 1333mhz RAM / GeForce 9400 256mb ) with Mountain Lion 10.8.4
The problem is that, i can't install the drivers from the bootcamp app ( the one from the bootcamp itself app, where you need a USB to download it)
i've already partitioned the HDD, and installed succesfully a Windows 7 Ultimate 64bit.
But there's one little issue, when i try install the drivers i downloaded before on my USB, it says that "Bootcamp x64 is unsupported on this computer model".
BUT, what? i've installed correctly the Windows 7 64bit on the iMac.
I can't install anything, but only graphics driver. ( manually)
I searched in every forum trying to resolve my problem, i've read that you can install it from de DVD with Snow Leopard that came with the computer
but that disk is broken; it's annoying because it seems that is the only solution , with that resulting on a dead end.
I could install my NVIDIA drivers, using the ones from bootcamp drivers, BUT USING THE WIN_32 version because the WIN_64 was unsupported by my machine. ok, i could install the drivers and was the 263.03 i think.
Now i want to upgrade to my lastest drivers ( 320.14 WQHL ) and says that can't detect my gpu. but the old driver that came with recognized it with no problems. I tried also auto detect GPU, and the same drivers but no result.
Anyway, the main problem is that is "Bootcamp x64 is unsupported on this computer model". with a Windows 7 64bit copy installed on the bootcamp partition. this is ******* me off
I sucessfully installed on my Macbook Pro Late 2008 ( C2D 2.06ghz / 8 GB RAM / 9600m GT ) and everything fine, a Windows 7 64bit. installed the drivers and everything fine, even accepted the lastest drivers (320.14 WQHL) from nvidia. but that was on Mountain Lion 10.8
but since 10.8.3 only lets you install only 64bit, i can't search for a copy of win32bit and install it because, it's going to be the same problem anyways.
So if you could help me out with this *** problem.

I have an iMac (24-inch, Early 2008) — iMac8,1 and I have exactly the same issue. Now, I'm running Mavericks, unfortunately.
On the one hand, from http://support.apple.com/kb/HT3986, I see:
"Do all Intel-based Macs support Windows 7?
All Intel-based Macs support Windows 7 using Boot Camp 3.1 or later except these:
iMac (17-inch, Early 2006)
iMac (17-inch, Late 2006)
iMac (20-inch, Early 2006)
iMac (20-inch, Late 2006)
MacBook Pro (15-inch, Early 2006)
MacBook Pro (17-inch, Late 2006)
MacBook Pro (15-inch, Late 2006)
MacBook Pro (17-inch, Early 2006)
Mac Pro (Mid 2006, Intel Xeon Dual-core 2.66GHz or 3GHz)"
So, I should be good.
However, from http://support.apple.com/kb/HT5634, my iMac is not supported in Boot Camp requirements, which would have been nice to know before I purchased a copy of Windows 7. I cannot get the Windows drivers to download from Boot Camp, and when I download them manually, whether version 4 or 5, I get the "Bootcamp x64 is unsupported on this computer model" message, which makes the HT3986 information unhelpful. I even tried a Snow Leopard CD while in Windows, and it gave me the same message. I tried one of the 3.x Bootcamp files, and still no good.
The funny thing is, I ran Bootcamp to create the partition for Windows 7, and it even popped up a message stating that Windows 7 was the latest Windows I could install on that machine, and the installation went fine. However, I am missing who knows what drivers, etc, because Apple won't provide the Windows support software for a machine that evidently can run the software. The graphics drivers appear to be fine, as the aspect ratio corrected itself, something that didn't happen on my MBP without having the Windows Bootcamp software. I also have wi-fi, which is better than some experience.
I even cannot get the little Boot Camp Windows icon/software that should be accessible in the system tray, so I can set preferred system to boot in, tell it to boot into OS X, etc. So, for that, I would have to rely on rebooting while holding down the ALT key, and my non-Apple keyboard for some reason won't do that (but that's another subject).
I guess there is nothing to do other than just do everything manually, piece by piece, unless someone has a solution that is eluding me.

In which boot camp support software I can install the drivers for win 7 32 bit.my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers

in which boot camp support software I can install the drivers for win 7 32 bit.
my os is X10.8.5 and I install windows 7 32 bit but I can not install drivers.
also my macbook pro model is MC723.

Read this. You need to be running Snow Leopard or later.
http://support.apple.com/kb/ht3986

How to install all the drivers for the MacBook with Windows 7 or 8 without the disk from OSX Lion? Where can I find the drivers?

Guys, a have one big problem..My customer brought me a macbook with windows 7 installed to do a format and reinstallation, but she is no longer the OSX Lion, and do not know how to install the sound drivers, "touchpad", among other drivers, how to solve this? Where can I find the drivers? The MacBook is now with Windows 8 installed.

Sorry my bad english..
See is meant. The MacBook has already come for me with Windows 7 installed, checked that it does not have another partition with OSX Lion installed, do not know how the person who did the maintenance before I managed to remove the partition with the Lion, so I can not create a disk or access boot camp because there is no partition Lion and don't own the DVDs of OSX Lion, you understand me?
There is a boot camp Windows executable? Where do I find, since I poked around and found nothing on ...
The sound driver is installed, but not working ... and the rest are missing there also, the trackpad also does not work correctly, the right button does not work ... My experience with mac is low, it may be that you do not know how it works correctly the trackpad

I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

I have just purchased the latest macbook pro 13 retina (late 2013). I want to connect to a Dell U2713H Monitor. As the new macbook doesn't have a cd slot, I am unable to install the monitor drivers etc. Where can I download the drivers?

Thanks for your prompt reply. I'm not sure how to connect to the monitor as the only ports available on this model mac are Thunderbolt. The mini display to display cable supplied doesn't seem to work out of the TB port. Do I need to use a Thunderbolt cable + an adaptor?

I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

I running snow leopard on my MBP- where can I find the drivers for windows XP if I install them via bootcamp? Thanks!

You won't find them until you are in Windows.
Helps to read even print the guide.
If you have auto run enabled, which is a security risk, the Apple setup.exe will run.
Otherwise, just run that.
Either use your OS X DVD, or use the drivers downloaded by Boot Camp Assistant.
Two different ways to get them.

HT3986 What I can do to install the drivers like WFi, speaker ... While I haven't the Mac mini CD?

What I can do to install the drivers like WFi, speaker ... While I haven't the Mac mini CD?

Kmasry wrote:
What I can do to install the drivers like WFi, speaker ... While I haven't the Mac mini CD?
Best thing is to read the instructions before you start actually, but now you need to go back to OSX, start Boot Camp Assistant again and perform the first task on the list, download the Windows Support Software, then go back to Windows and install it. You'll need a thumb drive or a blank DVD to store the drivers on.

Can't install Vista drivers; the installer keeps yelling at me to reboot to finish the insta

...And, of course, when I do, nothing happens. I've tried to rid my registry of everything Creative, but every time I run the beta driver install it yells at me saying that the drivers are already installed, and to reboot and finish the install.
Ideas? I've had problems getting drivers to work before, but never problems INSTALLING the drivers...

Yes do unpack the driver with Winrar, but use the setup.exe in driver folder instead. This will start an small pop up window called "Creative Update Utility". Enable "Overwrite Older version" box (could be named somehting else but you get the picture), and start installing. This should install the drivers, only problem is you wont get Audio Console installed. And there is no way of install audio console without the regular installer. But atleast you should get drivers installed, if you have the right files.

HT3986 Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64, however when i insert my OS CD to install the drivers using the boot camp method, it says unsupported to this computer model

Hi, i have a macbook pro version 10.6.8 with boot camp version 3.0.4. I managed to install windows 7 professional x64 bits but however when i tried to install the drivers using the OSX MAC CD using boot camp, it prompt me boot camp x 64 is unsupported with this computer model. Then i tried the method by right click the bootcamp x64 and managed to install the drivers. However, i still couldnt manage access the internet and it prompts me no networking hardware detected...Any idea how can i solve it?
P.S i tried updating my bootcamp version 3.0.4 in mac os with bootcamp x64 version 3.1 exe but it shows me weird wording..
my bootcamp version in windows 7 is 2.1..

Uninstall 2.x totally
Use CCleaner Registry tool
Do whatever you need to to nuke the existing Apple programs and folders hidden here and there also.
BC 2.2 was XP and Vista only

I can't install the drivers on Satellite A665

Similar Messages

Maybe you are looking for