I can't install the update on Macbook

I recently searched for updates and my mac has to update 2.11 GB files.
It downloads them and then it asks for restart.
When i restart , it starts installing and at the end it says it failed installing. Various errors appear like "Uknown error occured"
Note, i don't have the lion cd anylonger so i cant make a fresh install.
I appreciate any support i receive.

Which updates are these? If you're running 10.8.2, there have really been only two updates since then: the 10.8.2 supplemental update (which you can download from http://support.apple.com/kb/DL1581) and the Java update.
Which updates are you trying to install?
Clinton

Similar Messages

I have a new pc and have installed (again) CS5, however I can not install the updates Adobe Bridge, Adobe Extension Manager, Adobe Photoshop (64 bit) and Potoshop Camera Raw.

I have a new pc and have again installed CS5 however and unfortunately I can not install the updates Adobe Bridge, Adobe extension Manager, Adobe Photoshop (64 bit) and Photoshop Camera Raw ?

Hi DerrylS,
I would request you to try the below mentioned link for Error U44M1P7:
http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
If problem still persist and as in log file it says "Exit code 7", kindly try below mentioned links.
Link 1: http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html
Link 2: http://helpx.adobe.com/creative-suite/kb/error-exit-6-exit-7.html
Thanks!
Atul Saini

Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.

Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.
Thank you for your help.
Walter

Thank you very much for your help. Now, I was able to install the update (Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5, Mac). But I couldn’t mark the answer as correct. I didn’t find the „correct“ button.
Kind regards
Walter
Am 25.12.2014 um 16:06 schrieb station_two:
Photoshop CS5 broke down twice. I deinstalled and than reinstalled. Now CS5 works but I can't install the updates. "An error occurred, try it again later." But it's not said what error occurred.
created by station_two in Photoshop General Discussion - View the full discussion
OK, here's the Windows version of the update:
Adobe - Photoshop : For Windows : Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5
and for Mac:
Adobe - Photoshop : For Macintosh : Adobe Photoshop 12.0.4 update for Adobe Photoshop CS5
Of course, ignore the idiotic recommendation that appears there to try to use Help > Updates. We already know that doesn't work.
If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7043416#7043416 and clicking ‘Correct’ below the answer
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7043416#7043416
To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
Start a new discussion in Photoshop General Discussion by email or at Adobe Community
For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

You can not install the update "iTunes" [10.6.3]

Hi everyone, on my MacBookPro a few days ago the itunes suggest me an update to 10.6.3. After the verify procedure/download,as every time ,comes the windows within the installation info, but when i start the installation (from the button) comes a popup titled "You can not install the update "iTunes" ---- Unable to verify the update: This could be corrupted during download. The update will be downloaded and checked the next time you run Software Update. ----
...BUT NOTHING EVERY TIME SHOW ME THE SAME ERROR
Anyone kwon the solution ??
Thanks in advance..

I'd try updating using a .dmg installer downloaded from the Apple Website:
http://www.apple.com/itunes/download/

I can not install the update from adobe media encoder

I can not install the update from adobe media encoder for MPeg 2 DVD, it will not install error code U44M2P28

Would you have any screenshots, filename and the exact URL that you used to download Flash Player. Can you also, please provide your system configuration to help us identify the issue.
Thanks,
Anamika
Adobe Team

I upgraded to Lion and now Safari doesn't work and the updater hangs so I can't install the updates. Can anyone help me with this?

I upgraded to Lion and now Safari hangs up and the updater hangs up so I can't install the update. Can anyone help?

Reinstalling Lion
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.

HT201364 I have all the requirements and I still can't install the update

I have a 3 year old mac, enough memory and hard drive space, snow leopard 10.6.8 installed yet it still says I can't install the update.

Okay,
It would help us to help you if we could have some more technical info about your iMac.
If you so choose, Please download, install and run Etrecheck.
Etrecheck was developed as a simple Mac diagnostic reporting tool by a regular Apple Support forum user and technical support contributor named Etresoft.
Etrecheck is a small, unobstrusive app that compiles a static snapshot of your entire Mac hardware system and installed software.
This is a free app that has been honestly created to provided help in diagnosing issues with Macs running the new OS X 10.9 Mavericks.
It is not malware and can be safely downloaded and installed onto your Mac.
http://www.etresoft.com/etrecheck
Copy/paste and post its report here in another reply thread so that we have a complete profile of your Mac's hardware and installed software so we can all help with your Mac performance issues.
Thank You.

Can i install software updates to macbook brought from usa which im using in india ???, can i install software updates to macbook brought from usa which im using in india ???

CAN I INSTALL SOFTWARE UPDATES TO MY MACBOOK PRO WHICH I BROUGHT FROM U.S.A & I'M USING IT IN INDIA??? PLS SAY YES OR NO
URGENT !!

It shouldnt matter where you purchased the computer. Just log into the Mac App Store and you will be able to update the software.

I can't install the update 9.5.2 for Acrobat Pro for Mac.

I am using Mac OS 10.7.4. I currently have Acrobat Pro 9.5.1 on my system. I've been able to download the 9.5.2 upgrade successfully via the "'check for updates" link in the application and from also from the Adobe website.
The installer cannot install the update. The process begins but then I get a message that components have been disabled. The message refers me to Acrobat website for help to reingage components. Unfortunately, I was not able to find any such help through their not so user friendly website.
The alternative suggestion from the message was to uninstall the application, then reinstall it. I tried using the uninstaller that was in my Acrobat Pro folder, but when I opened the uninstaller, I got a message saying the installer was not for this application.
I have an installation disk to reinstall the program and I have no problem manually uninstalling the Acrobat Pro from the system, but I don't know what needs to be removed from where.
Anyone have any suggestions on what to try next?
I'm beginning to feel like this upgrade is just a gimmick to encourage people to upgrade to Acrobat Pro X.

I was getting the same error: "Insufficient data for image" and the document wouldn't open. But Foxit and Chrome read the files directly, with no problems.
On a Mac, the 9.5.2 upgrade works fine under Acrobat Pro 9!!
Do any of you run Kaspersky antivirus? When I ran the root kit scanner - is doesn't like some of the Adobe System files and will quarantine them – this only happened in July: This is when it quarantined some files that were authored by Adobe. This is when the updates to Adobe seemed to have stopped working properly?
I submitted the “quarantined” files to Kaspersky and they came back and said that the Adobe files allowed “trojan” like backdoor access to my PC - To get adobe working again I allowed them back into my system and took them out of Quarantine. The 9.5.2 update worked fine after this.
I thought it was a fault with Kaspersky 2011 until I updated to 2013 (last week) and the Root Kit scanner completely removed the registration for Adobe Acro 9....No opportunity to deactivate...program wouldn’t run with error messages about the registration of Acrobat Pro 9. I reinstalled the programme; it will run but cannot be upgraded from the DVD rom version
Now I’m struggling to get my Adobe product serial number reactivated. The Indian call centre tell me the retail serial number is invalid and not an Adobe serial at all, then I get told about 30 mins later in the same call the serial number is actually registered to someone else - they're just oxygen thieves...
The botom line was, that unless you bought from Adobe online, and they can track your purchase, you're on your own for support...
Ironically, when I first installed Acrobat 9 Pro back in 2010, the software installed fine, activated and I got a nice Welcome email message from Adobe, free downloads too - not much use though - perhaps this is one of those keep the product sales up schemes...you've had your two years time to buy an upgrade!.
I think these issues are linked up with the extreme piracy control that Adobe have implemented in their products - it's gone too far...

I can't install the update ios 5.1.1 after i download it at my ipad 2.

attention to everyone...
pliz help me
i cant install the update of the new ios 5.1.1
what should i do?
im so sick of this.

IT come out
AN error occur installing...
WHat should i do.?
IM new in using ipad2
WHen i get new update of new ios 5.1.1 i click it and download it...
HOwever i cannot install it untill now...
HOw to remove the ios that i have install?

Can't install the update to 10.5.3

hi guys
i cant seem to install the update from 10.5 to 10.5.3. it restarts and stops at "configuring installation" for like 10 years or something and never progresses.. how do i make it continue.

Are you using this update? (The combo one?)
If you are using the delta update, it will only work if you are coming from 10.5.2.
-D

Can not install any updates on macbook

This is what I have...
Hardware Overview:
Model Name: MacBook
Model Identifier: MacBook3,1
Processor Name: Intel Core 2 Duo
Processor Speed: 2.2 GHz
Number Of Processors: 1
Total Number Of Cores: 2
L2 Cache: 4 MB
Memory: 2 GB
Bus Speed: 800 MHz
Boot ROM Version: MB31.008E.B02
SMC Version: 1.24f2
Sudden Motion Sensor:
State: Enabled
capacity: 111.47 GB
available: 17.8 GB
Used: 93.67 GB on disk
(100,580,335,616 bytes)
I also have a copy of iLife 09 that has been installed on my iMac. I would like it to go on the MacBook as well so everything is compatible. It says I need to update the software for OS X but I haven't been able to do that for awhile. This is the message it gives me.
+The update "Mac OS X Update Combined: can't be installed.+
+The following install step failed: run preinstall script for MacOSXUpdCombo 10.5.8. Contact the software manufacturer for assistance.+
It gives me a simular message no matter what software I try to update, printer, itunes...
I have tried making sure I have 15% available memory and I tried making a new user account.
Any help would be appreciated!

First, to the following:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
If this doesn't help then download the updater at support.apple.com/downloads/ and try again.

Itunes error while updating to 8,02, now i can't install the update

so i ran the update through itunes for the 8.02 update. it downloaded the update and while it tried to install it, it says
"The feature you are trying to use is on a network resource that is unavailable"
So i point it to the correct folder, and i get this error message
the file itunes.msi is not a valid installation package for the product itunes. try to find the installation pacakge "itunes.msi" in a folder form which you can install Itunes
So i ran it the update THREE TIMES and each time i get that same error. For some reason it thinks the itunes.msi is not complete, but according to the updater program, it finished downloading. (FYI its 37,101,056 bytes)
Soooo i downlaoded a new version of itunes from the apple website and again i'm getting the same error messages.
So i tried uninstalling it from the control panel, and again,

It sounds as though you need the Microsoft Installer clean up utility..
Here is a method:
== uninstall with cleanup ==
Download a fresh copy of iTunes and the stand alone version of Quicktime (the one without iTunes)
http://www.apple.com/quicktime/download/win.html
http://www.apple.com/itunes/download/
Download and install Microsoft Installer cleanup utility, there are instructions on the page as well as the download. Note that what you download is the installer not the program – you have to run it to install the program. The installer doesn't give any message to confirm the installation.
http://support.microsoft.com/kb/290301/
(To run the program – All Programs>>Windows Install)
Now use the following method to remove iTunes and its components:
XP
http://support.apple.com/kb/HT1925
Vista
http://support.apple.com/kb/HT1923
*If you hit a problem with one of the uninstalls don't worry*, carry on with the deleting of files and folders as directed in the method.
When you get to deleting Quicktime files in the system32 folder as advised in the method, you can delete any file or folder with Quicktime in the name.
Restart your PC.
Run the Microsoft Installer Cleanup Utility. (Start > All Programs > Windows Install Clean Up)
Remove any references you find to the programs you removed - strictly speaking you only need to worry about those programs where the uninstall failed.
If you don’t see an entry for one of the programs that did not uninstall, look out for blank entries or numeric entries that look like version numbers e.g. 7.x for Quicktime or 1.x for Bonjour.
restart your PC
Install the stand alone Quicktime and check that it works.
If it does, install iTunes.
===

How can i install the updated software when my pho...

I am using nokia 206 dual sim. Today i find software update info and i download the updates but after download when i want to install in it need 5mb free memory .while my phone sun with 10mb and i have not keep any data in my phone. How can i install it. I aslo reboot my phone twice today.

For this problem, i suggest you to visit nearest Nokia care center and upgrad your firmware. Firmware upgrad is free of cost from Nokia in warranty period.
Hope it help for you.

Can you install the update for Linksys EasyLink Advisor over the current version?

I was notified of a new update for Lela, Lela-3-11.9139.94. I saved the download to a file.
My question is as follows: Before installing the new version, do I need to uninstall the current version 3.0?
I just got the router running properly and do not want to mess anything up.
Solved!
Go to Solution.

I had v 2.0 working fine... I downloade the v3.0 "lela-3.11.9139.94.exe" and when the install is at the "installing JRE it hangs.. and never ends. I am using XP professional with latest fixes.. I tried to clear the reistry, Tried install 5 times, Allway tops at JRE.. Also installed latest SUN JRE.. I have no idea what i wrong.. Must be a bug in the install..
Any suggestion?
Reginaldo
Message Edited by rbarosa on 06-29-2009 06:28 PM
Message Edited by rbarosa on 06-29-2009 06:28 PM

I can't install the update on Macbook

Similar Messages

Maybe you are looking for