I can't launch Mail after i update the OS to X Yosemite

I can't launch Mail after i update the OS to X Yosemite.

can't open mail after installing yosemite

Similar Messages

  • Can't send mail after AirPort update

    After I installed the latest AirPort update, I can no longer send emails through Mac Mail but I can still receive them. I can send emails if I plug my MacBook directly into the cable service router through the ethernet port. According to my ISP (Cox), I have Mail configured to work properly. Is there a setting on the AirPort that I need to change?

    The error message says:
    "The sender address [my email address] was rejected by the server smtp.east.cox.net.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be delivered."
    There is only one server I can use. There is a button for the Connection Doctor, and that shows all green lights.

  • Can't launch Safari after Software Update

    I can't start Safari anymore and I don't know what to do. In short, click on the dock and no bounce. Double-click on the icon within Applications and it doesn't launch either. These problems, I'm guessing are a result of the combination of objects delivered by Software Update yesterday. Based on the log below, I installed the following:
    2006-05-29 22:05:53 -0700: Installed "Pages Update" (1.0.2)
    2006-05-29 22:05:58 -0700: Installed "Apple Intermediate Codec" (1.0.1)
    2006-05-29 22:06:12 -0700: Installed "Keynote Update" (2.0.2)
    2006-05-29 22:06:52 -0700: Installed "GarageBand Update" (2.0.2)
    2006-05-29 22:07:42 -0700: Installed "iPhoto Update" (5.0.4)
    2006-05-29 22:08:04 -0700: Installed "Java 1.3.1 and 1.4.2 Release 2" (2.0)
    2006-05-29 22:09:01 -0700: Installed "QuickTime" (7.1)
    2006-05-29 22:09:43 -0700: Installed "iTunes" (6.0.4)
    2006-05-29 22:10:02 -0700: Installed "iPod Updater 2006-03-23" ( )
    Additional problematic behavior includes:
    (1) other applications saying OS X is not 10.3.8 or higher
    (2) can't launch Software Update from the Apple menu or from the "About This Mac" window
    (3) can't see the system version in "About This Mac" (shows the serial number instead)
    (4) can't run a bunch of other apps (Dashboard, iMovie, iChat, Sims 2 University)
    Any clues? Am I in the right forum?
    iBook G4   Mac OS X (10.4.2)  

    (3) in About This Mac click on the serial number and it should cycle through the Mac OS version, build, and serial number. Run Repair Disk Permissions then run Software update again. There might be other updates available. After each update run Repair Disk Permissions.

  • Can't open mail after installing update with 10.6.8 says my mail is out of date

    Please help - new to Macs and I installed automatic update of 10.6.8 - 4 days ago and now I can't open up mail  - it says "You can't use this version of Mail with this version of Mac OS X. You tried to open Mail version 4.5 (1084/1085) in Applications/ Mail.
    So I went to  Applications, says this message again. So I   used my discs that  came with the computer adn installed again  Applications - no luck.
    I had luckily  backed up 2 days before this update - so went to Time Machine - did restore - now good still - can't  open mail. CLick on Iconand get same messgae .
    Please help. Thank you

    rainbowmum wrote:
    Thank you for the very clear basic instructions—helpful for a newbie.…Also my first screen shot !! I see that it does not have .App next to it
    Most likely because you have Finder's preferences->Advanced->Show all filename extensions unchecked. Check it, log out, and back in and all the apps should display the .app extension.
    Now, back to your problem. If you installed the Security Update 2012-004, it failed to update Mail to 4.6; thus, your problem. Manually DL it from http://support.apple.com/kb/DL1586 and reinstall it.

  • Can't receive mail after security update 9/19/12

    iMac runiing 10.6.8 and Mail version 4.6 has not received any emails since I did software update on 9/19/12. I can receive mail in my accounts on my iPhone.

    You're welcome.
    The thing is, AFAIK Mail wouldn't put the message in the Sent mailbox unless it has received confirmation from the outgoing server that the message has indeed been sent, so it seems to me that the problem is not that messages are not being sent, but rather that they don't arrive at the destination for some reason.
    I bcc myself on every email for filing reasons and have
    not recieved one of my own emails since Friday night.
    Do you receive other mail normally? Have you checked for those messages on the web?
    I can log into my employers web tool and send email that way,
    so something is going on with my machine, whatever it is.
    Well, not necessarily. Maybe there is something wrong with the outgoing server you're using in Mail. Is this your only mail account? Do you have access to any other outgoing server that you could try?

  • Can't send mail after security update

    Hello, I installed a security update friday night, and can no longer send email using either Mail 2.1 or Thunderbird. Both were working prior to the security update.
    I am not getting any error messages except for the ones over the phone that go..."did you get my email? What email?" In fact, both Mail and Thunderbird give every indication that the email was sent.
    I can mail myself a test from a web program, so my smtp server is working.
    I can receive mail fine.
    I am blaming the security update for this, but I have no idea where to look or what to do. Can I uninstall the update?

    You're welcome.
    The thing is, AFAIK Mail wouldn't put the message in the Sent mailbox unless it has received confirmation from the outgoing server that the message has indeed been sent, so it seems to me that the problem is not that messages are not being sent, but rather that they don't arrive at the destination for some reason.
    I bcc myself on every email for filing reasons and have
    not recieved one of my own emails since Friday night.
    Do you receive other mail normally? Have you checked for those messages on the web?
    I can log into my employers web tool and send email that way,
    so something is going on with my machine, whatever it is.
    Well, not necessarily. Maybe there is something wrong with the outgoing server you're using in Mail. Is this your only mail account? Do you have access to any other outgoing server that you could try?

  • Can't Open Mail after security update 10.6.8

    I can not get the mail app to run.  This is the error message I keep getting.
    Did the SecUpd2012-004 update.
    After the update, I had (and still have) 2 copies of mail in my application folder.
    I've repaired my permissions.
    Tried to got back using the time machine (that was a waste of hours).
    Also, deleted the mail app (8.1) and then reinstalled the SecUpd2012-004.
    Only thing I haven't done is to do the Combo 10.6.8 update.
    I've noticed that other people are starting similar threads.  Anybody have a solution?  I've been working on it all day and no joy.
    Thanks in advance.

    Well, I thought that we might have had a solution, but no such luck.
    I did the combined update - and after that I had only one Mail app in the applications folder (encouraging) - and it appeared to be the correct one by it's icon.
    Thought about doing a repair permissions but didn't do it after the combined update.
    After the combined update, I did the secUpd, the second mail app was there with it's generic icon again and
    Needless to say, I'm back to square 1.
    So, I'm thinking I've got some options here.  One of my options would be to get another HD, slug it into one of the open HD slots, take out my 10.6 CD format it and then if possible use time machine to put that drive in the state where everything worked right before the update.  This would seem to be the fastest, time wise way of making the issue go away.
    You guys think I could / should delete the 4.6 mail app and start over with the combined update and then do a permissions repair after the update?

  • Can't send mail after loading update

    Stopped in the ATT store and they told me others are having the same problem and suggested I go to the Apple store. Anyone able to fix this problem without going to Apple store?

    The error message says:
    "The sender address [my email address] was rejected by the server smtp.east.cox.net.
    Select a different outgoing mail server from the list below or click Try Later to leave the message in your Outbox until it can be delivered."
    There is only one server I can use. There is a button for the Connection Doctor, and that shows all green lights.

  • I can't launch: Mail iCal n' Safari

    i can't Launch Mail iCal n' Safari
    the icon keep bunching in the Doc but nothing happens.
    Yet,i have no problem launching Words n' Firefox.
    any suggestions?
    Not being to open mail is horrible, lease help...
    Thanks in advance,
    ~ Grace

    When Apple programs fail to launch but third-party programs work fine, there is a strong chance that you have inadvertently disabled some needed system font with FontBook or other font manager program. I suffered this after trying to shut off fonts I thought were surplus.
    If you have been playing with FontBook, return to it and make sure ALL font are active. Although you'll have to deal with some oddball fonts in your font menus, that should get thing going.
    If FontBook shows no disabled fonts, you may have a corrupted font involved.
    One of the top users in these forums, Kurt Lang, authored an excellent overview of font management that you can read here:
    http://www.jklstudios.com/misc/osxfonts.html

  • TS3899 Unable to access E-mail after new update

    Unable to access ER-mail after new update.  Most recomendations delete the account with contacts---any other solutions??

    Contact the email provider to troubleshooting.
    Delete and re-add the account.
    Without any details about the issue there is little to nothing that we fellow users can suggest.

  • Can't launch color after upgrading to OS 10.5

    I can't launch color after upgrading to OS 10.5. The message shows " Unable to initialize OpenGL. Make sure Video Desktop is disable." Can anyone help please?

    Click here and follow the instructions.
    (46092)

  • Can't steam video after latest update on my I pad mini!

    Can't steam video after last update on I pad mini . Video loads very slow and keeps dropping out it was fine before the update!!!

    If it's showing a different Apple ID, you need to either update them from that Apple ID or delete and redownload them when signed into a different one, which may require repurchasing paid applications.
    (109113)

  • After I updated the iOS version on 11/23/13, I can not access anymore my Pages. It says it's updating. How long would this take to update?

    After I updated the iOS version on 11/23/13, I can not access anymore my Pages documents. It says it's updating. How long would this take to update?

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased.
    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    How to Solve the Problem of An iPad App Download Stuck on “Waiting”
    http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
    How To Get Rid Of Your iPad App Download Frozen Problem
    http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
    iTunes: How to resume interrupted iTunes Store downloads
    http://support.apple.com/kb/ht1725
    Another thing to try - Turn the iPad Off & then back ON.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • 3014 error i can't restore ipad after firmware update attempt

    3014 error i can't restore ipad after firmware update attempt

    See this thread with the same question.
    https://discussions.apple.com/thread/5045573?tstart=0

  • I can not login Flickrs, after I update IOS 8.0.2 ?

    I can not login Flickrs, after I update iOS 8.0.2 ?

    I tried hard reset by press both power and home button.
    I can not hear music played through the speaker. Just music only.
    The speaker workes well with imcomming call or out going call by turn on loud speaker.
    Linh.

Maybe you are looking for

  • Problems Getting A Serial Number For My Student Edition

    I got a copy of Photoshop CS4 Extended - Student Edition from JourneyEd.com. Tried to register the product with myidentit-e.com and it says I have an invalid product code number. I call them and they tell me to call JourneyEd and get a new product co

  • Help needed creating a fillable form and emailing it.

    I'm new to all this and have no clue where to start.  If there is a document that lays out how to do this, a link to it would work.  I need to create 2 fillable forms.  1 will need a submit button and once you click submit, it automatically sends the

  • IPod Can't Mount

    I recently had my iPod crash while listening in the car through my Alpine MP3 unit. It literally quit mid song and froze the Alpine logo on the screen. I disconnected and reset (menu & center wheel button). When I did this it did not turn back on so

  • April 2008 iMac 24" causes my house lights to flicker

    I have an April 2008 version 24" iMac with 2.8 GHz processor. When the computer goes into what I call "display sleep" mode, any lights on the same circuit as the computer start flickering. By "display sleep," I mean that the computer is running but t

  • [svn:fx-trunk] 12886: SpriteVisualElement globalToLocal bug fix

    Revision: 12886 Revision: 12886 Author:   [email protected] Date:     2009-12-12 17:35:34 -0800 (Sat, 12 Dec 2009) Log Message: SpriteVisualElement globalToLocal bug fix SDK-24477 - resized SpriteVisualElement returns the incorrect point when calling