I can't load modules after upgrade
I can't load modules after upgrade xfree 4.4.0-2, gcc 3.4.0-1, perl 5.8.4-1 and kernel 2.6.5-3.I don't have even access to the internet from Arch.System says that modules have invalid version.
What can I do now?
You were right robot5x. After command lilo I have got modules loaded properly.Thanks.
Similar Messages
-
I've upgraded glibsc, filesystem and migrated to systemd. I can't load KDE after it. I didn't find any info about KDE and systemd, but seems systed is the problem. KDM and initializations works without troubles, but kde plasma and desktop doesn't show up. Black screen or wallpaper and cursor is visible. Some of my daemon.log:
Dec 27 11:40:17 localhost dbus[195]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Dec 27 11:40:17 localhost systemd[1]: Starting Authorization Manager...
Dec 27 11:40:17 localhost systemd[1]: upower.service: main process exited, code=dumped, status=5/TRAP
Dec 27 11:40:17 localhost systemd[1]: Unit upower.service entered failed state
Dec 27 11:40:17 localhost systemd[1]: polkit.service: main process exited, code=exited, status=1/FAILURE
Dec 27 11:40:17 localhost systemd[1]: Failed to start Authorization Manager.
Dec 27 11:40:17 localhost systemd[1]: Unit polkit.service entered failed state
Dec 27 11:40:42 localhost dbus-daemon[195]: dbus[195]: [system] Failed to activate service 'org.freedesktop.PolicyKit1': timed out
Dec 27 11:40:42 localhost dbus[195]: [system] Failed to activate service 'org.freedesktop.PolicyKit1': timed out
Dec 27 11:40:42 localhost udisks-daemon[664]: (udisks-daemon:664): udisks-daemon-CRITICAL **: error getting authority reference: Error initializing authority: Error calling StartServiceByName for org.freedesktop.PolicyKit1: GDBus.Error:org.freedesktop.DBus.Error.TimedOut: Activation of org.freedesktop.PolicyKit1 timed out
Dec 27 11:40:42 localhost systemd[1]: udisks.service: main process exited, code=exited, status=1/FAILURE
Dec 27 11:40:42 localhost systemd[1]: Unit udisks.service entered failed state
Probably I need to show some other log? I'm not sure which exactly.I've dived into systemd and had some progress. One of problems was with conflict between udisk2 and udisk (both were loaded). As far as I understand KDE doesn't support udisk2, so I did systemctl disable udisk2.service. Now there are no failed units:
UNIT LOAD ACTIVE SUB DESCRIPTION
proc-sys...t_misc.automount loaded active running Arbitrary Executable File Fo
sys-devi...-net-eth0.device loaded active plugged /sys/devices/pci0000:00/0000
sys-devi...-sda-sda1.device loaded active plugged ST3120026A
sys-devi...-sda-sda2.device loaded active plugged ST3120026A
sys-devi...-sda-sda3.device loaded active plugged ST3120026A
sys-devi...block-sda.device loaded active plugged ST3120026A
sys-devi...block-sr0.device loaded active plugged HL-DT-ST_DVDRAM_GSA-4163B
sys-devi...und-card0.device loaded active plugged /sys/devices/pci0000:00/0000
sys-devi...block-fd0.device loaded active plugged /sys/devices/platform/floppy
sys-devi...tty-ttyS2.device loaded active plugged /sys/devices/platform/serial
sys-devi...tty-ttyS3.device loaded active plugged /sys/devices/platform/serial
sys-devi...tty-ttyS0.device loaded active plugged /sys/devices/pnp0/00:09/tty/
sys-devi...tty-ttyS1.device loaded active plugged /sys/devices/pnp0/00:0a/tty/
sys-module-fuse.device loaded active plugged /sys/module/fuse
sys-subs...ices-eth0.device loaded active plugged /sys/subsystem/net/devices/e
-.mount loaded active mounted /
dev-hugepages.mount loaded active mounted Huge Pages File System
dev-mqueue.mount loaded active mounted POSIX Message Queue File Sys
home.mount loaded active mounted /home
proc-sys...infmt_misc.mount loaded active mounted Arbitrary Executable File Fo
sys-kernel-debug.mount loaded active mounted Debug File System
tmp.mount loaded active mounted Temporary Directory
systemd-...ord-console.path loaded active waiting Dispatch Password Requests t
systemd-...ssword-wall.path loaded active waiting Forward Password Requests to
colord.service loaded active running Manage, Install and Generate
console-kit-daemon.service loaded active running Console Manager
console-...em-start.service loaded active exited Console System Startup Loggi
crond.service loaded active running LEGACY unit for "crond" rc s
cups.service loaded active running CUPS Printing Service
dbus.service loaded active running D-Bus System Message Bus
[email protected] loaded active running Getty on tty1
kdm.service loaded active running K Display Manager
network.service loaded active running LEGACY unit for "network" rc
openntpd.service loaded active running OpenNTP Daemon
polkit.service loaded active running Authorization Manager
rc-local.service loaded active exited /etc/rc.local Compatibility
samba.service loaded active running LEGACY unit for "samba" rc s
syslog-ng.service loaded active running System Logger Daemon
systemd-binfmt.service loaded active exited Set Up Additional Binary For
systemd-journald.service loaded active running Journal Service
systemd-logind.service loaded active running Login Service
systemd-remount-fs.service loaded active exited Remount Root and Kernel File
systemd-sysctl.service loaded active exited Apply Kernel Variables
systemd-...es-setup.service loaded active exited Recreate Volatile Files and
systemd-...-trigger.service loaded active exited udev Coldplug all Devices
systemd-udevd.service loaded active running udev Kernel Device Manager
systemd-...sessions.service loaded active exited Permit User Sessions
systemd-...le-setup.service loaded active exited Setup Virtual Console
udisks.service loaded active running UDisks
udisks2.service loaded active running Disk Manager
upower.service loaded active running Daemon for power management
dbus.socket loaded active running D-Bus System Message Bus Soc
dmeventd.socket loaded active listening Device-mapper event daemon F
lvmetad.socket loaded active listening LVM2 metadata daemon socket
syslog.socket loaded active running Syslog Socket
systemd-initctl.socket loaded active listening /dev/initctl Compatibility N
systemd-journald.socket loaded active running Journal Socket
systemd-shutdownd.socket loaded active listening Delayed Shutdown Socket
systemd-...d-control.socket loaded active listening udev Control Socket
systemd-udevd-kernel.socket loaded active running udev Kernel Socket
dev-sda2.swap loaded active active /dev/sda2
arch-daemons.target loaded active active Arch Daemons
basic.target loaded active active Basic System
cryptsetup.target loaded active active Encrypted Volumes
getty.target loaded active active Login Prompts
graphical.target loaded active active Graphical Interface
local-fs-pre.target loaded active active Local File Systems (Pre)
local-fs.target loaded active active Local File Systems
multi-user.target loaded active active Multi-User
remote-fs.target loaded active active Remote File Systems
sockets.target loaded active active Sockets
sound.target loaded active active Sound Card
swap.target loaded active active Swap
sysinit.target loaded active active System Initialization
syslog.target loaded active active Syslog
systemd-...iles-clean.timer loaded active waiting Daily Cleanup of Temporary D
But it's still not working. Seems now it's dbus problem or so. What do I need to run KDE? How can I figure it out? Any wiki? suggestions? -
I can't open firefox after upgrading to 4.0
I get the message over and over again that i have to restart my computer for upgrading to firefox.
I tried new installation. But i got problems on all my accountsStart your '''Computer''' in safe mode. Then start Firefox. Try '''Safe''' web sites.
Starting The Computer In Safe Mode;
If running, turn your computer off.
Remove any disks and thumb drives that are in your hard drives or ports.
Now start your computer but also;
'''Windows; '''Press the <F8> key repeatedly.
'''Mac: '''Hold down the Shift key.
'''Linux; '''Using the command line, Linux/Unix computers can be booted
into various run levels that determine which resources are loaded.
For example, "runlevel 1" is typically the equivalent to Windows and
Mac safe modes.
* Source; '''[http://encyclopedia2.thefreedictionary.com/Linux+Safe+Mode Safe Mode; Free Online Encyclopedia]'''
When the '''Boot''' menu is displayed, release the key you were pressing.
You must now choose what mode to use. The most used are;
* Safe Mode; The computer runs with only a minimum set of programs.
* Safe Mode '''With '''Networking; Same as above, but with internet access. -
WiSM can't function normally after upgrading from vesion 6.0.182 to 7.0.220.
I have a WiSM installed in WS-6504E, vesion 6.0.182. It can't function normally after upgrading to version7.0.220.
When it was unstable, I found three strange condition
1. A lot of log looks like this
*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-FILE_OPEN_FAILED: osapi_file.c:370 Failed to open the file : /proc/1059/stat.(erno 24)
*osapiReaper: Mar 10 14:53:39.282: %OSAPI-3-TASK_GETTIME_FAILED: osapi_task.c:3431 Failed to retrieve statistics (/proc/<pid>/stats) for task 'fmcHsTask'
2. Internal Temperature was showed "sensor failed"
3. CPU User load is Zero
Anybody can tell me what wrong with the wireless controller ?Could be a hardware failure.
-
Can't load module: Out of memory or no room in system tables
Hi,
I had to install openSSH on Solaris 8. By default Solaris 8 doesn't have random devices. Moreover, that machine cannot be rebooted. Hence, I chose a patch which doesn't need a reboot if the random devices are created and the /kernel/drv/random module is force loaded.
While force loading the module (modload /kernel/drv/random) I got the below error.
" can't load module: Out of memory or no room in system tables "
I have checked for the memory and there are no memory constraints. I need to force load the module.
Could anyone help me out ?
Thanx,
JaffI can see only 5 topics and all of them are very specific.
Flash Install
Live Upgrade
Jumpstart
Solaris Install from cd
Solaris on x86
Could you please suggest me the forum in which I need to post general help ?
Thnx,
Jaff -
I am a newbie trying to configure an on board NIC (Rhine-II) on Solaris 10.
I have downloaded the driver from http://homepage2.nifty.com/mrym3/taiyodo/eng/vfe-2.3.1.tar.gz
and followed the steps in the readme. However, when I try to load the
module, modlod reports it cannot find the file.
bash-3.00# /usr/ccs/bin/make install
/usr/sbin/install -f /kernel/drv -m 755 -u root -g sys i386/vfe
new owner is root
i386/vfe installed as /kernel/drv/vfe
bash-3.00# ./adddrv.sh
exit status = 0
System configuration files modified but vfe driver not loaded or attached.
Driver (vfe) installed.
bash-3.00# /usr/ccs/bin/make uninstall
rm -f /kernel/drv/vfe
bash-3.00# modload obj/vfe
can't load module: No such file or directory
bash-3.00# ls -l
total 578
-r--r--r-- 1 111 111 1592 Aug 28 07:58 COPYING
lrwxrwxrwx 1 111 111 17 Oct 3 11:58 Makefile -> Makefile.i386_gcc
-r--r--r-- 1 111 111 559 Aug 28 07:58 Makefile.amd64_gcc
-r--r--r-- 1 111 111 567 Aug 28 07:58 Makefile.amd64_suncc
-r--r--r-- 1 111 111 2835 Aug 28 07:58 Makefile.common
lrwxrwxrwx 1 111 111 20 Oct 3 11:58 Makefile.config -> Makefile.config_gld2
-r--r--r-- 1 111 111 336 Aug 28 07:58 Makefile.config_gld2
-r--r--r-- 1 111 111 376 Aug 28 07:58 Makefile.config_gld3
-r--r--r-- 1 111 111 360 Aug 28 07:58 Makefile.i386_gcc
-r--r--r-- 1 111 111 365 Aug 28 07:58 Makefile.i386_suncc
-r--r--r-- 1 111 111 630 Aug 28 07:58 Makefile.macros
-r--r--r-- 1 111 111 362 Aug 28 07:58 Makefile.sparc_gcc
-r--r--r-- 1 111 111 367 Aug 28 07:58 Makefile.sparc_suncc
-r--r--r-- 1 111 111 566 Aug 28 07:58 Makefile.sparcv9_gcc
-r--r--r-- 1 111 111 575 Aug 28 07:58 Makefile.sparcv9_suncc
-r--r--r-- 1 111 111 7506 Aug 28 07:58 README.japanese-euc
-r--r--r-- 1 111 111 6163 Aug 28 07:58 README.txt
-rwxr-xr-x 1 111 111 471 Aug 28 07:58 adddrv.sh
drwxr-xr-x 2 111 111 512 Aug 28 07:59 amd64
-r--r--r-- 1 111 111 142619 Aug 28 07:58 gem.c
-r--r--r-- 1 111 111 16399 Aug 28 07:58 gem.h
drwxr-xr-x 2 111 111 512 Aug 28 07:59 i386
-r--r--r-- 1 111 111 4359 Aug 28 07:58 mii.h
lrwxrwxrwx 1 111 111 4 Oct 3 11:58 obj -> i386
-r--r--r-- 1 111 111 19722 Aug 28 07:58 rhinereg.h
drwxr-xr-x 2 111 111 512 Aug 28 07:58 sparc
drwxr-xr-x 2 111 111 512 Aug 28 07:58 sparcv9
-r--r--r-- 1 111 111 65 Aug 28 07:58 version
-r--r--r-- 1 111 111 55963 Aug 28 07:58 vfe_gem.c
bash-3.00# ls -l i386/
total 280
-rw-r--r-- 1 111 111 50600 Aug 28 07:59 gem.o
-rw-r--r-- 1 111 111 69808 Aug 28 07:59 vfe
-rw-r--r-- 1 111 111 20952 Aug 28 07:59 vfe_gem.o
bash-3.00# I have tried deleting the module, and compiling, but I am getting an error that within gem.h the sys/mac.h file cannot be found.
I have thoroughly reveiwed the thread http://forum.sun.com/jive/thread.jspa?forumID=298&threadID=105923 but the problems are not exactly the same.
Any help would be appreciated. Thanks.how would you expect modload to work after you run "make uninstall"? when you run that final make command the module is removed.
.7/M. -
Can't launch color after upgrading to OS 10.5
I can't launch color after upgrading to OS 10.5. The message shows " Unable to initialize OpenGL. Make sure Video Desktop is disable." Can anyone help please?
Click here and follow the instructions.
(46092) -
Can´t open LR after upgrade to 5.3 without entering a licens key
Can´t open LR after upgrade to 5.3 without entering a licens key
I have seen comments from someone who indicated that every time they started Lightroom they were prompted for the serial number, even though they had already entered it. Is this your situation? I can't remember what the solution is, but I have seen that problem mentioned in the past.
-
Can't open Pages after upgrading to snow leopard on 10.6.8
Can't open Pages after upgrading to snow leopard on 10.6.8
Has Spotlight finished its indexing? Check in the upper right. If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.
-
I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?
Check the Epson web site for updates to drivers and Epson scan software.
-
I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?
Check the Epson web site for updates to drivers and Epson scan software.
-
[S]Systemd can't start Load Kernel Modules after upgrade to Linux 4.0
After upgrading from linux 3.19.3-3 to 4.0.1-1 I've been having a bit of an issue. At that same time I upgraded readline (6.3.006-1 → 6.3.008-1), linux-firmware (20150206.17657c3-1 → 20150410.ec89525-1), nvidia (349.16-1 → 349.16-2) , wpa_suplican (2.4-1 → 1:2.3-1), and arpack (3.1.5-1 → 3.2.0-1). There may be some typos there since I'm copying by hand. Normally this wouldn't be much of a problem because I have been, priory to a few weeks ago, really good about back ups and would just roll my OS back 15 minutes. But things like that tend to fly out the window when the semester gets heavy. My last snapshot was on May 22nd, which I could still use, but would rather not. Also, it seems like a good idea to try to actual fix things for a change.
[edit] I should mention that this upgrade was run April 30th.[/edit]
When I finished booting the system after the upgrade, I got an error message during boot “systemd[1]: Failed to start Load Kernel Modules.” When it finished booting I run “dmesg -l err” to confirm that I'm not having a bad day dream or something. I'm also still seeing the errors that I described in this thread. Don't know if the two are related. I also noticed, when I was logging in, that it said that my stystem was still using the old kernel. Indeed, according to “uname -r” I'm still using 3.19.3-3-ARCH.
The closest thing to experience I have with this is when I forget to mount /boot before upgrading linux, so I made sure /boot was mounted and rand “sudo pacman -S linux” to reinstall, but this didn't help. Just to check I ran “ls /lib/modules” and see the directorys “4.0.1-1-ARCH” and “extramodules-4.0-ARCH” as I would expect after a succesful upgrade of the kernel.
Running “systemctl –failed, shows that in addition to systemd-modules-load.service, lm_sensors.service has also failed. I somehow expect lm_sensors depends on systemd-modules-load. I tried “systemctl restart systemd-modules-load”, but was rewarded with a message telling me that it failed. The “journalctl -xe” log has the lines
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
Looking at the Wiki for Systemd under troubleshooting it actually has an example of trying to work through this exact issue. Following that I tried
journalctl _PID=1799
systemd[1]: system-modules-load[1799]: Failed to look up alias 'sg': Function not implemented
systemd[1]: system-modules-load[1799]: Failed to look up alias 'nfs': Function not implemented
which I already mentioned. At this point that bit of the Wiki stopped being useful.
Looking up on Google Failed to look up alias 'nfs': Function not implemented returned this thread from two years ago. Running “lsmod |grep sg” or $lsmod |grep nfs” returns nothing, but it also returns nothing on this laptop I'm using as well, so I don't imagine that is useful. Also, “# grep nfs /lib/modules/4.0.1-1-ARCH/modules.alias” returns a “Nosuch file or directory” error.
Searching for something on 'sg' turned up https://bbs.archlinux.org/viewtopic.php?id=165361, which was also not useful.
As a sort of last resort I tried https://wiki.archlinux.org/index.php/Do … the_kernel
I reboot and boot into my fallback installation, running 3.19.3-3, mount the partition with my main Arch on it, and arch-chroot into it.
I downgraded linux, and nvidia, exited chroot, and rebooted hoping to the Great Bacon that I didn't do anything too damaging. After all, my back ups are more than a week out of date.
This worked. I'm still getting those annyoing (they are only annoying right?) error messages I mentioned earlier. My system seems fine, if somewhat out of date.
Still, the question remains, “why did that happen, and how do I actually fix it?”
[edit2=solution]
There were two problems. First, my grub.cfg entry was pointing to the wrong UUID. I fixed this by regenerating it. Then I noticed the UUID in the grub menu itself (during the boot prosses) did not match what was in grub.cfg. To fix this I reinstalled grub.
Last edited by nstgc (2015-05-05 12:07:30)Well, I took snapshots, not back ups but they work well enough for this, and rsynced /boot/ to where it use to be, moved/renamed the subvolume boot, and commented out the appropriate line in fstab. I also deleted that other /boot from before. I unmount /boot, and regenerate my grub.cfg. If my machine still boots, I'll try for an upgrade.
grub.cfg now looks like
# DO NOT EDIT THIS FILE
# It is automatically generated by grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
### BEGIN /etc/grub.d/00_header ###
insmod part_gpt
insmod part_msdos
if [ -s $prefix/grubenv ]; then
load_env
fi
if [ "${next_entry}" ] ; then
set default="${next_entry}"
set next_entry=
save_env next_entry
set boot_once=true
else
set default="0"
fi
if [ x"${feature_menuentry_id}" = xy ]; then
menuentry_id_option="--id"
else
menuentry_id_option=""
fi
export menuentry_id_option
if [ "${prev_saved_entry}" ]; then
set saved_entry="${prev_saved_entry}"
save_env saved_entry
set prev_saved_entry=
save_env prev_saved_entry
set boot_once=true
fi
function savedefault {
if [ -z "${boot_once}" ]; then
saved_entry="${chosen}"
save_env saved_entry
fi
function load_video {
if [ x$feature_all_video_module = xy ]; then
insmod all_video
else
insmod efi_gop
insmod efi_uga
insmod ieee1275_fb
insmod vbe
insmod vga
insmod video_bochs
insmod video_cirrus
fi
if [ x$feature_default_font_path = xy ] ; then
font=unicode
else
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
font="/arch/usr/share/grub/unicode.pf2"
fi
if loadfont $font ; then
set gfxmode=auto
load_video
insmod gfxterm
set locale_dir=$prefix/locale
set lang=en_US
insmod gettext
fi
terminal_input console
terminal_output gfxterm
if [ x$feature_timeout_style = xy ] ; then
set timeout_style=menu
set timeout=5
# Fallback normal timeout code in case the timeout_style feature is
# unavailable.
else
set timeout=5
fi
### END /etc/grub.d/00_header ###
### BEGIN /etc/grub.d/10_linux ###
menuentry 'Arch Linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-simple-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
submenu 'Advanced options for Arch Linux' $menuentry_id_option 'gnulinux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
menuentry 'Arch Linux, with Linux linux' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-advanced-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux.img
menuentry 'Arch Linux, with Linux linux (fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-linux-fallback-3873d8ba-9472-4d92-ab0d-e94574bd0eae' {
load_video
set gfxpayload=keep
insmod gzio
insmod part_msdos
insmod part_msdos
insmod part_msdos
insmod btrfs
set root='hd4,msdos1'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
else
search --no-floppy --fs-uuid --set=root 3873d8ba-9472-4d92-ab0d-e94574bd0eae
fi
echo 'Loading Linux linux ...'
linux /arch/boot/vmlinuz-linux root=UUID=3873d8ba-9472-4d92-ab0d-e94574bd0eae rw rootflags=subvol=arch quiet
echo 'Loading initial ramdisk ...'
initrd /arch/boot/intel-ucode.img /arch/boot/initramfs-linux-fallback.img
### END /etc/grub.d/10_linux ###
### BEGIN /etc/grub.d/20_linux_xen ###
### END /etc/grub.d/20_linux_xen ###
### BEGIN /etc/grub.d/30_os-prober ###
menuentry 'Windows Vista (loader) (on /dev/sdd2)' --class windows --class os $menuentry_id_option 'osprober-chain-30F403F0F403B75E' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt2'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt2 --hint-efi=hd3,gpt2 --hint-baremetal=ahci3,gpt2 30F403F0F403B75E
else
search --no-floppy --fs-uuid --set=root 30F403F0F403B75E
fi
chainloader +1
menuentry 'Windows Vista (loader) (on /dev/sdd4)' --class windows --class os $menuentry_id_option 'osprober-chain-FE2648382647EFE7' {
insmod part_gpt
insmod ntfs
set root='hd3,gpt4'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt4 --hint-efi=hd3,gpt4 --hint-baremetal=ahci3,gpt4 FE2648382647EFE7
else
search --no-floppy --fs-uuid --set=root FE2648382647EFE7
fi
chainloader +1
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-simple-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
submenu 'Advanced options for Arch (on /dev/sdd5)' $menuentry_id_option 'osprober-gnulinux-advanced-832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
menuentry 'Arch (on /dev/sdd5)' --class gnu-linux --class gnu --class os $menuentry_id_option 'osprober-gnulinux-/boot/vmlinuz-linux--832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd' {
insmod part_gpt
insmod ext2
set root='hd3,gpt5'
if [ x$feature_platform_search_hint = xy ]; then
search --no-floppy --fs-uuid --set=root --hint-bios=hd3,gpt5 --hint-efi=hd3,gpt5 --hint-baremetal=ahci3,gpt5 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
else
search --no-floppy --fs-uuid --set=root 832bcc8d-836e-4b4e-8d9c-0a19f5bcf7dd
fi
linux /boot/vmlinuz-linux root=/dev/sdd5
initrd /boot/initramfs-linux.img
### END /etc/grub.d/30_os-prober ###
### BEGIN /etc/grub.d/40_custom ###
# This file provides an easy way to add custom menu entries. Simply type the
# menu entries you want to add after this comment. Be careful not to change
# the 'exec tail' line above.
### END /etc/grub.d/40_custom ###
### BEGIN /etc/grub.d/41_custom ###
if [ -f ${config_directory}/custom.cfg ]; then
source ${config_directory}/custom.cfg
elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
source $prefix/custom.cfg;
fi
### END /etc/grub.d/41_custom ###
### BEGIN /etc/grub.d/60_memtest86+ ###
if [ "${grub_platform}" == "pc" ]; then
menuentry "Memory Tester (memtest86+)" --class memtest86 --class gnu --class tool {
search --fs-uuid --no-floppy --set=root --hint-bios=hd4,msdos1 --hint-efi=hd4,msdos1 --hint-baremetal=ahci4,msdos1 --hint-bios=hd1,msdos2 --hint-efi=hd1,msdos2 --hint-baremetal=ahci1,msdos2 --hint-bios=hd5,msdos4 --hint-efi=hd5,msdos4 --hint-baremetal=ahci5,msdos4 3873d8ba-9472-4d92-ab0d-e94574bd0eae
linux16 /arch/boot/memtest86+/memtest.bin
fi
### END /etc/grub.d/60_memtest86+ ###
It seems as if the lines you mentioned, Scimmia, have changed. I'll take that as a good sign.
[edit] System still boots. Trying for the upgrade.
[edit2] Still can't use Linux 4.0. I'm getting the same errors as before.
[edit3] Successfully downgraded.
[edit4] I looked through /etc/mkinitcpio.conf and there isn't anything in there that isn't in my laptop's. I don't know if this will help, but here is the output of "pacman -Q"
a52dec 0.7.4-8
aalib 1.4rc5-10
abs 2.4.4-2
accountsservice 0.6.40-1
acl 2.2.52-2
adobe-source-han-sans-jp-fonts 1.002-1
adwaita-icon-theme 3.16.0-1
alsa-lib 1.0.29-1
alsa-plugins 1.0.29-2
alsa-utils 1.0.29-1
alsi 0.4.7-1
arch-install-scripts 15-1
arch-wiki-docs 20150219-1
arch-wiki-lite 20150219-2
archlinux-keyring 20150212-1
arpack 3.2.0-1
aspell 0.60.6.1-2
asunder 2.7-1
at-spi2-atk 2.16.0-1
at-spi2-core 2.16.0-1
atk 2.16.0-1
atkmm 2.22.7-1
attr 2.4.47-1
autoconf 2.69-2
automake 1.15-1
avahi 0.6.31-15
awesome 3.5.6-1
bash 4.3.033-1
bash-completion 2.1-5
bc 1.06.95-1
bcache-tools 1.0.8-1
bigpkg 0.4.0-2
binutils 2.25-2
bison 3.0.4-1
blas 3.5.0-1
bluez 5.30-1
bluez-libs 5.30-1
bonnie++ 1.97-1
boost 1.58.0-1
boost-libs 1.58.0-1
btrfs-progs 3.19.1-1
bullet 2.82-1
bzip2 1.0.6-5
ca-certificates 20150402-1
ca-certificates-cacert 20140824-2
ca-certificates-mozilla 3.18-3
ca-certificates-utils 20150402-1
cabextract 1.4-3
cairo 1.14.2-1
cairo-clock 0.3.4-4
cairo-dock 3.4.1-1
cairo-dock-plug-ins 3.4.1-1
cairomm 1.10.0-3
calibre 2.27.0-1
cantarell-fonts 0.0.16-2
caribou 0.4.18.1-1
cddb-py 1.4-7
cdparanoia 10.2-5
cdrdao 1.2.3-7
cdrtools 3.01a28-1
celt 0.11.3-2
cfv 1.18.3-6
cheese 3.16.1-1
chmlib 0.40-4
chromaprint 1.1-2
chromium 42.0.2311.135-1
chromium-pepper-flash 1:17.0.0.169-3
cifs-utils 6.4-1
cinnamon-desktop 2.4.2-1
cinnamon-translations 2.4.4-1
clementine 1.2.3-5
clucene 2.3.3.4-8
clutter 1.22.0-2
clutter-gst2 2.0.14-1
clutter-gtk 1.6.0-2
cmus 2.6.0-4
cogl 1.20.0-1
colord 1.2.9-2
colord-gtk 0.1.26-2
compositeproto 0.4.2-3
confuse 2.7-3
coreutils 8.23-1
cracklib 2.9.4-1
cryptsetup 1.6.6-1
cups 2.0.2-4
cups-filters 1.0.68-1
cups-pk-helper 0.2.5-1
curl 7.42.0-1
damageproto 1.2.1-3
db 5.3.28-2
dbus 1.8.16-2
dbus-glib 0.102-2
dconf 0.24.0-1
desktop-file-utils 0.22-1
device-mapper 2.02.116-1
dhclient 4.3.2-1
dhcpcd 6.8.1-1
dia 0.97.3-1
dialog 1:1.2_20150225-1
dictd 1.12.1-4
diffutils 3.3-2
ding-libs 0.4.0-3
djvulibre 3.5.27-1
dnssec-anchors 20150403-1
dotconf 1.3-4
dri2proto 2.8-2
dri3proto 1.0-1
dvd+rw-tools 7.1-5
dvdisaster 0.72.6-1
e2fsprogs 1.42.12-2
ecryptfs-utils 106-1
ed 1.11-1
efl 1.13.2-1
elementary 1.13.2-1
elfutils 0.161-3
enca 1.16-1
enchant 1.6.0-5
enlightenment 0.19.4-1
evas_generic_loaders 1.13.2-1
evince 3.16.0-1
exempi 2.2.2-1
exfat-utils 1.1.1-1
exif-py 1.2.0-1
exiv2 0.24-1
expac 4-3
expat 2.1.0-4
extcalc 0.9.3_1-3
faac 1.28-5
faad2 2.7-4
fakeroot 1.20.2-1
fbreader 0.99.4-4
ffmpeg 1:2.6.2-1
fftw 3.3.4-1
file 5.22-1
file-roller 3.16.1-1
filesystem 2015.02-1
findutils 4.4.2-6
firefox 37.0.2-1
fixesproto 5.0-3
flac 1.3.1-1
flashplugin 11.2.202.457-1
flex 2.5.39-1
fltk 1.3.3-4
fluidsynth 1.1.6-4
fontconfig 2.11.1-1
fontsproto 2.1.3-1
foomatic-db 3:20150308-1
foomatic-db-engine 3:20150308-1
freetype2 2.5.5-1
fribidi 0.19.6-2
fsarchiver 0.6.19-1
fuse 2.9.3-2
fuse-exfat 1.1.0-1
gawk 4.1.2-1
gc 7.4.2-2
gcc-fortran 4.9.2-4
gcc-libs-multilib 4.9.2-4
gcc-multilib 4.9.2-4
gconf 3.2.6-3
gcr 3.15.92-1
gd 2.1.1-2
gdb 7.9-1
gdbm 1.11-1
gdk-pixbuf2 2.31.3-1
geany 1.24.1-1
gemrb 0.8.2-1
geoclue 0.12.99-2
geoclue2 2.2.0-2
geocode-glib 3.16.0-1
gettext 0.19.4-1
ghostscript 9.16-1
giflib 5.1.1-1
git 2.3.7-1
gjs 1.43.3-1
glew 1.12.0-1
glib-networking 2.44.0-2
glib2 2.44.0-1
glibc 2.21-3
glibmm 2.44.0-1
glproto 1.4.17-1
glu 9.0.0-3
gmime 2.6.20-2
gmp 6.0.0-2
gnome-bluetooth 3.16.1-1
gnome-color-manager 3.16.0-1
gnome-control-center 3.16.1-2
gnome-desktop 1:3.16.1-1
gnome-dictionary 3.16.1-1
gnome-disk-utility 3.16.0-1
gnome-menus 3.13.3-1
gnome-online-accounts 3.16.0-2
gnome-session 3.16.0-1
gnome-settings-daemon 3.16.1-1
gnome-shell 3.16.1-2
gnome-shell-extensions 3.16.1-1
gnome-system-monitor 3.16.0-1
gnome-themes-standard 3.16.0-1
gnome-tweak-tool 3.16.1-1
gnome-video-effects 0.4.1-1
gnupg 2.1.3-3
gnuplot 5.0.0-2
gnutls 3.4.0-1
gobject-introspection 1.44.0-1
gobject-introspection-runtime 1.44.0-1
google-chrome 42.0.2311.135-1
gparted 0.22.0-1
gpgme 1.5.4-1
gpm 1.20.7-4
graphite 1:1.2.4-1
grep 2.21-2
grilo 0.2.12-1
groff 1.22.3-3
grsync 1.2.5-1
grub 1:2.02.beta2-5
gsettings-desktop-schemas 3.16.1-1
gsfonts 20150122-1
gsm 1.0.13-8
gssproxy 0.4.1-1
gst-libav 1.4.5-1
gst-plugins-bad 1.4.5-2
gst-plugins-base 1.4.5-1
gst-plugins-base-libs 1.4.5-1
gst-plugins-good 1.4.5-2
gst-plugins-ugly 1.4.5-2
gstreamer 1.4.5-1
gstreamer0.10 0.10.36-4
gstreamer0.10-base 0.10.36-3
gstreamer0.10-base-plugins 0.10.36-3
gstreamer0.10-good 0.10.31-6
gstreamer0.10-good-plugins 0.10.31-6
gstreamer0.10-python 0.10.22-2
gstreamer0.10-ugly 0.10.19-14
gstreamer0.10-ugly-plugins 0.10.19-14
gthumb 3.4.0-1
gtk-update-icon-cache 2.24.27-1
gtk2 2.24.27-1
gtk3 3.16.2-1
gtkmm 2.24.4-1
gtkmm3 3.16.0-1
guile 2.0.11-2
gvfs 1.24.1-1
gvfs-mtp 1.24.1-1
gzip 1.6-1
hal-info 0.20091130-2
harfbuzz 0.9.40-2
harfbuzz-icu 0.9.40-2
haveged 1.9.1-2
hdparm 9.45-1
hdsentinel 0.8-2
help2man 1.46.4-1
hicolor-icon-theme 0.13-1
hplip 3.15.4-1
hspell 1.2-2
htmlcxx 0.85-4
htop 1.0.3-2
hunspell 1.3.3-1
hwids 20150129-1
hwinfo 21.10.1.1-1
hwloc 1.10.1-1
hyphen 2.8.8-1
i3-wm 4.10.2-1
i3lock 2.6-1
i3status 2.9-1
i7z 0.27.2.git1-1
iana-etc 2.30-4
icedtea-web 1.5.2-1
icu 55.1-1
imagemagick 6.9.1.0-1
imagewriter 1.10.1420800585.134a9b3-1
imlib2 1.4.7-1
inetutils 1.9.2-2
innoextract 1.4-0
inputproto 2.3.1-1
intel-tbb 4.3_20150209-1
intel-ucode 20150121-1
inxi 2.2.19-1
iproute2 3.19.0-1
iptables 1.4.21-3
iputils 20121221-3
ipython 3.1.0-1
iso-codes 3.57-1
jack 0.124.1-3
jansson 2.7-1
jasper 1.900.1-13
java-environment-common 2-2
java-runtime-common 2-2
jdk7-openjdk 7.u79_2.5.5-1
jfsutils 1.1.15-4
jmtpfs 0.5-1
jre7-openjdk 7.u79_2.5.5-1
jre7-openjdk-headless 7.u79_2.5.5-1
js 24.2.0-1
js17 17.0.0-1
json-c 0.12-2
json-glib 1.0.2-1
jsoncpp 1.4.4-1
julia 2:0.3.7-1
julia-docs 2:0.3.7-1
kbd 2.0.2-1
kbproto 1.0.7-1
keyutils 1.5.9-1
kmod 20-1
krb5 1.13.1-1
kvirc 4.2.0-4
lame 3.99.5-2
lapack 3.5.0-1
lcms 1.19-5
lcms2 2.6-1
ldb 1.1.20-1
ldns 1.6.17-2
less 471-1
lgogdownloader-git 20150310-1
lib32-acl 2.2.52-2
lib32-alsa-lib 1.0.29-1
lib32-alsa-plugins 1.0.29-2
lib32-atk 2.16.0-1
lib32-attr 2.4.47-1
lib32-bzip2 1.0.6-2
lib32-cairo 1.14.2-1
lib32-curl 7.41.0-1
lib32-db 5.3.28-2
lib32-e2fsprogs 1.42.12-1
lib32-elfutils 0.161-2
lib32-expat 2.1.0-2
lib32-fakeroot 1.20.2-1
lib32-flac 1.3.1-1
lib32-flashplugin 11.2.202.457-1
lib32-fontconfig 2.11.1-1
lib32-freetype2 2.5.5-1
lib32-gcc-libs 4.9.2-4
lib32-gdk-pixbuf2 2.31.3-2
lib32-gettext 0.19.4-1
lib32-giflib 5.1.1-1
lib32-glew 1.12.0-1
lib32-glib2 2.44.0-1
lib32-glibc 2.21-2
lib32-glu 9.0.0-2
lib32-gmp 6.0.0-1
lib32-gnutls 3.4.0-2
lib32-gsm 1.0.13-9
lib32-gtk2 2.24.27-1
lib32-harfbuzz 0.9.40-2
lib32-icu 55.1-1
lib32-jack 0.124.1-1
lib32-json-c 0.12-1
lib32-keyutils 1.5.9-1
lib32-krb5 1.13.1-1
lib32-lcms2 2.6-1
lib32-libaio 0.3.110-1
lib32-libasyncns 0.8-7
lib32-libcanberra 0.30-4
lib32-libcap 2.24-1
lib32-libcl 1.1-1
lib32-libcups 2.0.2-2
lib32-libdbus 1.8.16-1
lib32-libdrm 2.4.60-1
lib32-libffi 3.2.1-1
lib32-libgcrypt 1.6.3-1
lib32-libgpg-error 1.18-1
lib32-libice 1.0.9-1
lib32-libidn 1.30-1
lib32-libjpeg-turbo 1.4.0-1
lib32-libldap 2.4.40-1
lib32-libltdl 2.4.5-1
lib32-libnl 3.2.25-1
lib32-libogg 1.3.2-1
lib32-libpcap 1.6.2-1
lib32-libpciaccess 0.13.4-1
lib32-libpng 1.6.16-1
lib32-libpulse 6.0-1
lib32-libsamplerate 0.1.8-2
lib32-libsm 1.2.2-1
lib32-libsndfile 1.0.25-3
lib32-libssh2 1.5.0-1
lib32-libtasn1 4.4-1
lib32-libtiff 4.0.3-3
lib32-libtxc_dxtn 1.0.1-5
lib32-libusb 1.0.19-1
lib32-libvorbis 1.3.5-1
lib32-libx11 1.6.3-1
lib32-libxau 1.0.8-1
lib32-libxcb 1.11-1
lib32-libxcomposite 0.4.4-2
lib32-libxcursor 1.1.14-1
lib32-libxdamage 1.1.4-2
lib32-libxdmcp 1.1.2-1
lib32-libxext 1.3.3-1
lib32-libxfixes 5.0.1-1
lib32-libxft 2.3.2-1
lib32-libxi 1.7.4-1
lib32-libxinerama 1.1.3-1
lib32-libxml2 2.9.2-1
lib32-libxmu 1.1.2-1
lib32-libxrandr 1.4.2-1
lib32-libxrender 0.9.8-1
lib32-libxshmfence 1.2-1
lib32-libxslt 1.1.28-2
lib32-libxt 1.1.4-1
lib32-libxtst 1.2.2-1
lib32-libxxf86vm 1.1.4-1
lib32-llvm-libs 3.6.0-1
lib32-mesa 10.5.4-1
lib32-mpg123 1.22.1-1
lib32-ncurses 5.9-3
lib32-nettle 3.1.1-1
lib32-nspr 4.10.8-1
lib32-nss 3.18-1
lib32-nvidia-libgl 349.16-1
lib32-nvidia-utils 349.16-1
lib32-openal 1.16.0-1
lib32-openssl 1.0.2.a-1
lib32-p11-kit 0.23.1-2
lib32-pango 1.36.8-1
lib32-pcre 8.36-1
lib32-pixman 0.32.6-1
lib32-portaudio 19_20140130-1
lib32-readline 6.3.008-1
lib32-sdl 1.2.15-6
lib32-soundtouch 1.8.0-1
lib32-sqlite 3.8.9-1
lib32-systemd 219-1
lib32-tdb 1.3.4-1
lib32-util-linux 2.26.1-1
lib32-v4l-utils 1.6.0-1
lib32-wayland 1.7.0-1
lib32-wxgtk 3.0.2-4
lib32-xz 5.2.1-1
lib32-zlib 1.2.8-1
libabw 0.1.1-1
libaio 0.3.110-1
libao 1.2.0-1
libarchive 3.1.2-8
libart-lgpl 2.3.21-3
libass 0.12.1-1
libassuan 2.2.0-1
libasyncns 0.8-5
libatasmart 0.19-3
libatomic_ops 7.4.2-1
libavc1394 0.5.4-2
libbluray 0.8.0-1
libbsd 0.7.0-1
libcaca 0.99.beta18-2
libcanberra 0.30-5
libcanberra-pulse 0.30-5
libcap 2.24-2
libcap-ng 0.7.4-1
libcddb 1.3.2-4
libcdio 0.93-1
libcdio-paranoia 10.2+0.93+1-1
libcdr 0.1.1-2
libcl 1.1-4
libcroco 0.6.8-2
libcue 1.4.0-4
libcups 2.0.2-4
libdaemon 0.14-3
libdatrie 0.2.8-1
libdbus 1.8.16-2
libdca 0.0.5-4
libdrm 2.4.60-2
libdv 1.0.0-6
libdvbpsi 1:1.1.2-1
libdvdcss 1.3.0-1
libdvdnav 5.0.2-1
libdvdread 5.0.1-1
libe-book 0.1.2-2
libebml 1.3.1-1
libedit 20150325_3.1-1
libepoxy 1.2-2
libetonyek 0.1.1-1
libev 4.19-1
libevdev 1.4.2-1
libevent 2.0.22-1
libexif 0.6.21-2
libffi 3.2.1-1
libfontenc 1.1.3-1
libftdi-compat 0.20-1
libgcrypt 1.6.3-2
libgcrypt15 1.5.4-4
libgdm 3.16.1.1-1
libgee 0.18.0-1
libglade 2.6.4-5
libgme 0.6.0-3
libgnome-keyring 3.12.0-2
libgnomekbd 3.6.0-2
libgpg-error 1.19-1
libgpod 0.8.3-4
libgssglue 0.4-2
libgsystem 2015.1-1
libgtop 2.30.0-1
libgusb 0.2.4-1
libgweather 3.16.1-1
libgxps 0.2.2-3
libibus 1.5.10-1
libical 1.0.1-2
libice 1.0.9-1
libid3tag 0.15.1b-8
libidn 1.30-1
libiec61883 1.2.0-4
libimobiledevice 1.2.0-1
libinput 0.14.1-1
libirman 0.4.5-4
libjpeg-turbo 1.4.0-1
libkate 0.4.1-5
libksba 1.3.3-1
liblastfm 1.0.9-1
libldap 2.4.40-2
liblqr 0.4.2-1
libmaa 1.3.2-2
libmad 0.15.1b-7
libmatroska 1.4.2-1
libmediainfo 0.7.73-1
libmikmod 3.3.7-1
libmm-glib 1.4.6-1
libmms 0.6.4-1
libmng 2.0.2-3
libmodplug 0.8.8.5-1
libmp4v2 2.0.0-3
libmpc 1.0.3-1
libmpcdec 1.2.6-4
libmpeg2 0.5.1-5
libmspub 0.1.2-2
libmtp 1.1.8-1
libmwaw 0.3.4-1
libmygpo-qt 1.0.8-1
libndp 1.4-1
libnewt 0.52.18-2
libnl 3.2.25-1
libnm-glib 1.0.0-2
libnotify 0.7.6-1
liboauth 1.0.3-1
libodfgen 0.1.3-1
libofa 0.9.3-5
libogg 1.3.2-1
libomxil-bellagio 0.9.3-1
libpagemaker 0.0.2-1
libpaper 1.1.24-7
libpcap 1.6.2-1
libpciaccess 0.13.4-1
libpipeline 1.4.0-1
libplist 1.12-1
libpng 1.6.16-1
libproxy 0.4.11-5
libpulse 6.0-1
libpwquality 1.2.3-1
libquvi 0.9.4-3
libquvi-scripts 0.9.20131130-2
libqzeitgeist 0.8.0-4
libraw 0.16.0-3
libraw1394 2.1.0-2
libreoffice-fresh 4.4.2-1
librevenge 0.0.2-1
librpcsecgss 0.19-8
librsvg 1:2.40.9-1
libsamplerate 0.1.8-3
libsasl 2.1.26-7
libseccomp 2.2.0-1
libsecret 0.18-1
libshout 1:2.3.1-2
libsidplay 1.36.59-6
libsigc++ 2.4.1-1
libsigsegv 2.10-2
libsm 1.2.2-2
libsndfile 1.0.25-3
libsodium 1.0.2-1
libsoup 2.50.0-1
libspectre 0.2.7-2
libsrtp 15.1c9bd90-3
libssh 0.6.5-1
libssh2 1.5.0-1
libsystemd 219-6
libtar 1.2.20-2
libtasn1 4.4-1
libteam 1.14-2
libthai 0.1.21-1
libtheora 1.1.1-3
libtiff 4.0.3-5
libtiger 0.3.4-4
libtirpc 0.2.5-1
libtool 2.4.6-1
libtxc_dxtn 1.0.1-6
libunibreak 1.1-1
libunistring 0.9.5-1
libunwind 1.1-2
libupnp 1.6.19-1
libusb 1.0.19-1
libusb-compat 0.1.5-1
libusbmuxd 1.0.10-1
libutempter 1.1.6-2
libutil-linux 2.26.1-3
libva 1.5.1-1
libvdpau 1.1-1
libvisio 0.1.1-2
libvisual 0.4.0-5
libvorbis 1.3.5-1
libvpx 1.4.0-2
libwacom 0.11-1
libwbclient 4.2.1-1
libwebp 0.4.3-1
libwmf 0.2.8.4-12
libwpd 0.10.0-1
libwpg 0.3.0-1
libwps 0.3.1-1
libx11 1.6.3-1
libx264 2:144.20150223-1
libx86 1.1-4
libx86emu 1.1.23.1-1
libxau 1.0.8-2
libxaw 1.0.13-1
libxcb 1.11-1
libxcomposite 0.4.4-2
libxcursor 1.1.14-2
libxdamage 1.1.4-2
libxdg-basedir 1.2.0-3
libxdmcp 1.1.2-1
libxext 1.3.3-1
libxfixes 5.0.1-1
libxfont 1.5.1-1
libxft 2.3.2-1
libxi 1.7.4-1
libxinerama 1.1.3-2
libxkbcommon 0.5.0-1
libxkbcommon-x11 0.5.0-1
libxkbfile 1.0.9-1
libxklavier 5.4-1
libxml2 2.9.2-2
libxmu 1.1.2-1
libxp 1.0.3-1
libxpm 3.5.11-1
libxrandr 1.4.2-2
libxrender 0.9.9-1
libxshmfence 1.2-1
libxslt 1.1.28-3
libxss 1.2.2-2
libxt 1.1.5-1
libxtst 1.2.2-1
libxv 1.0.10-1
libxvmc 1.0.9-1
libxxf86dga 1.1.4-1
libxxf86vm 1.1.4-1
libyaml 0.1.6-1
libzen 0.4.31-1
libzip 0.11.2-1
licenses 20140629-1
links 2.9-1
linux 3.19.3-3
linux-api-headers 3.18.5-1
linux-firmware 20150410.ec89525-1
lirc 1:0.9.2.a-1
llvm-libs 3.6.0-5
lm_sensors 3.3.5-1
logrotate 3.8.9-1
lpsolve 5.5.2.0-3
lrzip 0.621-1
lua 5.2.4-1
lua-bitop 1.0.2-5
lua-expat 1.3.0-1
lua-lgi 0.8.0-2
lua-socket 3.0rc1-4
lua51 5.1.5-4
luajit 2.0.3-3
lvm2 2.02.116-1
lxdream 0.9.1-3
lz4 128-1
lzo 2.09-1
m4 1.4.17-1
make 4.1-1
man-db 2.7.1-1
man-pages 3.83-1
mcomix 1.01-1
mcpp 2.7.2-5
mdadm 3.3.2-1
memtest86+ 5.01-1
mencoder 37379-3
mesa 10.5.4-1
metamorphose2 0.8.3-2
mime-types 9-1
minitube 2.4-1
mjpegtools 2.1.0-1
mkinitcpio 18-2
mkinitcpio-busybox 1.21.1-2
mkvtoolnix-cli 7.8.0-3
mobile-broadband-provider-info 20120614-2
morituri-git 0.2.3.r3.gb1d685f-1
mozilla-common 1.4-4
mpfr 3.1.2.p11-1
mpg123 1.22.1-1
mplayer 37379-3
mtdev 1.1.5-1
mutagen 1.28-1
mutter 3.16.1.1-1
ncurses 5.9-7
nemo 2.4.5-1
neon 0.30.1-1
net-snmp 5.7.3-1
netctl 1.10-2
nettle 3.1.1-1
network-manager-applet 1.0.0-2
networkmanager 1.0.0-2
nfs-utils 1.3.2-6
nfsidmap 0.26-1
nm-connection-editor 1.0.0-2
npth 1.2-1
nspr 4.10.8-1
nss 3.18-3
ntfs-3g 2015.3.14-1
nvidia 349.16-1
nvidia-libgl 349.16-1
nvidia-utils 349.16-1
ogmtools 1.5-5
openal 1.16.0-1
opencore-amr 0.1.3-2
openjpeg 1.5.2-1
openmpi 1.8.4-1
openresolv 3.6.1-1
openssh 6.8p1-2
openssl 1.0.2.a-1
opus 1.1-1
orc 0.4.23-1
os-prober 1.64-1
p11-kit 0.23.1-2
p7zip 9.38.1-3
package-query 1.5-2
pacman 4.2.1-1
pacman-mirrorlist 20150315-1
pacmatic 20150126-1
pam 1.1.8-5
pambase 20130928-1
pango 1.36.8-1
pangomm 2.36.0-1
par2cmdline-tbb 20141125-1
parallel 20150322-1
parted 3.2-2
patch 2.7.5-1
pciutils 3.3.1-1
pcmciautils 018-7
pcre 8.36-2
pcsx2-git 1.3.1.r978.1aebca3-1
perl 5.20.2-1
perl-clone 0.37-2
perl-data-dump 1.22-1
perl-dbi 1.633-1
perl-encode-locale 1.04-1
perl-error 0.17023-1
perl-file-basedir 0.07-1
perl-file-listing 6.04-2
perl-file-which 1.09-4
perl-html-parser 3.71-3
perl-html-tagset 3.20-4
perl-http-cookies 6.01-2
perl-http-daemon 6.01-2
perl-http-date 6.02-2
perl-http-message 6.06-2
perl-http-negotiate 6.01-2
perl-ipc-system-simple 1.25-1
perl-libwww 6.08-1
perl-locale-gettext 1.05-11
perl-lwp-mediatypes 6.02-2
perl-net-http 6.07-1
perl-uri 1.67-1
perl-www-robotrules 6.02-2
perl-xml-libxml 2.0121-1
perl-xml-namespacesupport 1.11-3
perl-xml-sax 0.99-4
perl-xml-sax-base 1.08-3
phonon-qt4 4.8.3-1
phonon-qt4-gstreamer 4.8.2-1
phoronix-test-suite 5.6.0-1
php 5.6.8-2
pinentry 0.9.1-1
pixman 0.32.6-1
pkg-config 0.28-2
pkgfile 15-1
pms 1.90.1-1
podofo 0.9.3-1
polkit 0.112-2
poppler 0.32.0-1
poppler-glib 0.32.0-1
poppler-qt5 0.32.0-1
popt 1.16-7
portaudio 19_20140130-1
presentproto 1.0-1
printproto 1.0.5-3
procps-ng 3.3.10-2
protobuf 2.6.1-1
psmisc 22.21-2
pth 2.0.7-5
pulseaudio 6.0-1
pulseaudio-alsa 2-3
pv 1.6.0-1
pygobject-devel 3.16.1-1
pygobject2-devel 2.28.6-11
pygtk 2.24.0-5
pyqt4-common 4.11.3-4
pyqt5-common 5.4.1-2
python 3.4.3-2
python-dateutil 2.4.1-1
python-dbus 1.2.0-4
python-dbus-common 1.2.0-4
python-gmpy2 2.0.5-2
python-gobject 3.16.1-1
python-html2text 2015.4.14-1
python-matplotlib 1.4.3-2
python-mpmath 0.19-1
python-nose 1.3.6-1
python-numexpr 2.4.3-1
python-numpy 1.9.2-2
python-pandas 0.16.0-2
python-pygments 2.0.2-2
python-pyparsing 2.0.3-1
python-pyqt4 4.11.3-4
python-pyqt5 5.4.1-2
python-pytz 2015.2-1
python-pyzmq 14.5.0-2
python-scipy 0.15.1-2
python-setuptools 1:15.2-1
python-sip 4.16.7-1
python-six 1.9.0-1
python-sympy 0.7.6-2
python-tornado 4.1.0-2
python-xdg 0.25-2
python2 2.7.9-1
python2-apsw 3.8.9-1
python2-atspi 2.16.0-1
python2-beaker 1.7.0-1
python2-cairo 1.10.0-2
python2-chardet 2.3.0-1
python2-cherrypy 3.6.0-1
python2-cssselect 0.9.1-2
python2-cssutils 1.0-2
python2-dateutil 2.4.1-1
python2-dbus 1.2.0-4
python2-dnspython 1.12.0-1
python2-gobject 3.16.1-1
python2-gobject2 2.28.6-11
python2-html5lib 0.999-5
python2-lxml 3.4.4-1
python2-mako 1.0.1-1
python2-markupsafe 0.23-2
python2-mechanize 0.2.5-4
python2-netifaces 0.10.4-1
python2-pillow 2.8.1-1
python2-psutil 2.2.1-2
python2-pycdio 0.20-3
python2-pygments 2.0.2-2
python2-pyqt5 5.4.1-2
python2-setuptools 1:15.2-1
python2-sip 4.16.7-1
python2-six 1.9.0-1
python2-xdg 0.25-2
qca 2.0.3-5
qca-ossl 2.0.0-7
qjson 0.8.1-3
qpdf 5.1.2-1
qt4 4.8.6-5
qt5-base 5.4.1-4
qt5-declarative 5.4.1-4
qt5-location 5.4.1-4
qt5-script 5.4.1-4
qt5-sensors 5.4.1-4
qt5-svg 5.4.1-4
qt5-tools 5.4.1-4
qt5-translations 5.4.1-4
qt5-webchannel 5.4.1-4
qt5-webkit 5.4.1-4
qt5-xmlpatterns 5.4.1-4
qtchooser 48-1
qtwebkit 2.3.4-1
randrproto 1.4.1-1
raptor 2.0.15-2
rasqal 1:0.9.32-1
readline 6.3.008-1
recode 3.6-8
recordproto 1.14.2-2
redland 1:1.0.17-2
reflector 2014.11-1
reiserfsprogs 3.6.24-1
renderproto 0.11.1-3
resourceproto 1.2.0-3
rest 0.7.93-1
rhash 1.3.3-1
rng-tools 5-3
rpcbind 0.2.3-1
rsync 3.1.1-2
rtkit 0.11-5
rtmpdump 20140918-2
ruby 2.2.2-1
s-nail 14.8.0-1
sbc 1.3-1
schroedinger 1.0.11-2
scrnsaverproto 1.2.2-2
sdcv 0.4.2-8
sdl 1.2.15-7
sdl_image 1.2.12-3
sdl_mixer 1.2.12-4
sdl_net 1.2.8-2
sdl_ttf 2.0.11-3
sed 4.2.2-3
sg3_utils 1.40-1
shadow 4.2.1-3
shared-color-targets 0.1.5-1
shared-mime-info 1.4-1
sip 4.16.7-1
slang 2.3.0-1
smartmontools 6.3-2
smbclient 4.2.1-1
smpeg 0.4.5-1
snappy 1.1.1-1
sound-theme-freedesktop 0.8-2
soundtouch 1.8.0-1
spandsp 0.0.6-1
speech-dispatcher 0.8.1-1
speedtest-cli 0.3.1-1
speex 1.2rc2-1
speexdsp 1.2rc3-1
spotify 0.9.17.1-1
spotify-gnome-git 20141010-1
sqlite 3.8.9-1
startup-notification 0.12-4
steam 1.0.0.49-3
sudo 1.8.13-1
suitesparse 4.4.4-1
sysfsutils 2.1.0-9
systemd 219-6
systemd-sysvcompat 219-6
t1lib 5.1.2-5
taglib 1.9.1-1
talloc 2.1.2-1
tar 1.28-1
tdb 1.3.4-1
telepathy-glib 0.24.1-1
telepathy-logger 0.8.1-1
telepathy-mission-control 5.16.3-1
terminology 0.8.0-1
tevent 0.9.24-1
texinfo 5.2-3
texlive-bin 2014.34260-7
texlive-core 2014.36709-1
texlive-langchinese 2014.35921-1
texlive-langcjk 2014.0-1
texlive-langjapanese 2014.36466-1
texlive-langkorean 2014.36573-1
texlive-latexextra 2014.36706-1
texlive-pictures 2014.36605-1
texlive-science 2014.36659-1
texmaker 4.4.1-1
thin-provisioning-tools 0.4.1-1
thunderbird 31.6.0-2
tinyxml 2.6.2-3
tmux 1.9_a-2
totem-plparser 3.10.4-1
transmission-gtk 2.84-1
tsmuxer 1.10.6-14
ttf-dejavu 2.34-2
ttf-ms-fonts 2.0-10
tzdata 2015d-1
udisks2 2.1.5-1
unrar 1:5.2.7-1
unzip 6.0-10
upower 0.99.2-2
usbutils 008-1
util-linux 2.26.1-3
v4l-utils 1.6.2-1
vi 1:050325-4
videoproto 2.3.2-1
vim 7.4.712-1
vim-latexsuite 20130126-2
vim-runtime 7.4.712-1
vlc 2.2.1-2
vte-common 0.40.0-2
vte3 0.40.0-2
wavpack 4.70.0-2
wayland 1.7.0-1
webkit2gtk 2.8.1-1
webkitgtk 2.4.8-2
webrtc-audio-processing 0.1-2
wesnoth 1.12.2-2
wesnoth-data 1.12.2-1
wget 1.16.3-1
which 2.21-1
wildmidi 0.3.8-1
wine 1.7.42-2
winetricks 20141130-1
wireless_tools 30.pre9-1
wpa_supplicant 1:2.3-1
wxgtk 3.0.2-4
wxgtk2.8 2.8.12.1-3
wxpython 3.0.2.0-1
wxpython2.8 2.8.12.1-1
x265 1.6-1
xboxdrv 0.8.5-3
xcb-proto 1.11-1
xcb-util 0.4.0-1
xcb-util-cursor 0.1.2-1
xcb-util-image 0.4.0-1
xcb-util-keysyms 0.4.0-1
xcb-util-renderutil 0.3.9-1
xcb-util-wm 0.4.1-1
xdg-su 1.2.3-1
xdg-utils 1.1.0.git20150323-1
xdiskusage 1.51-1
xextproto 7.3.0-1
xf86-input-evdev 2.9.2-1
xf86dgaproto 2.1-3
xf86driproto 2.1.1-3
xf86vidmodeproto 2.3.1-3
xfsprogs 3.2.2-1
xineramaproto 1.2.1-3
xkeyboard-config 2.14-1
xorg-appres 1.0.4-1
xorg-bdftopcf 1.0.5-1
xorg-font-util 1.3.1-1
xorg-font-utils 7.6-4
xorg-fonts-alias 1.0.3-1
xorg-fonts-encodings 1.0.4-4
xorg-fonts-misc 1.0.3-3
xorg-iceauth 1.0.7-1
xorg-mkfontdir 1.0.7-2
xorg-mkfontscale 1.1.2-1
xorg-server 1.17.1-5
xorg-server-common 1.17.1-5
xorg-server-devel 1.17.1-5
xorg-server-utils 7.6-4
xorg-sessreg 1.1.0-1
xorg-setxkbmap 1.3.1-1
xorg-util-macros 1.19.0-1
xorg-xauth 1.0.9-1
xorg-xbacklight 1.2.1-1
xorg-xcmsdb 1.0.5-1
xorg-xgamma 1.0.6-1
xorg-xhost 1.0.7-1
xorg-xinit 1.3.4-2
xorg-xinput 1.6.1-1
xorg-xkbcomp 1.3.0-1
xorg-xmessage 1.0.4-2
xorg-xmodmap 1.0.9-1
xorg-xrandr 1.4.3-1
xorg-xrdb 1.1.0-1
xorg-xrefresh 1.0.5-1
xorg-xset 1.2.3-1
xorg-xsetroot 1.1.1-2
xproto 7.0.27-1
xscreensaver 5.32-1
xvidcore 1.3.3-1
xz 5.2.1-1
yajl 2.1.0-1
yaourt 1.5-1
zenity 3.14.0-1
zeromq 4.0.5-1
zita-alsa-pcmi 0.2.0-2
zita-resampler 1.3.0-3
zlib 1.2.8-3
zvbi 0.2.35-1
zziplib 0.13.62-2
[edit5] My /etc/modules-load.d directory is empty by the way, and "sudo /usr/lib/systemd/systemd-modules-load" returns nothing. Note, this is all while running Linux 3.19, but I believe it should demonstrate that I don't have any special modules running. Or so I believe.
Last edited by nstgc (2015-05-04 13:16:09) -
Web Access Not Loading Completely After Upgrade
We recently upgraded from TFS 2012 Update 2 to TFS 2013 Update 4.
After the upgrade, users are having intermittent issues trying to load Web Access - for some users, only the header loads, but none of the information below (like work items, for example) loads - the entire screen basically stays blank.
This is happening on different browsers for different people. Clearing caches has worked for some users and not others, and for some people the problem has come back after being able to load Web Access normally a couple days ago.
I do see this error popping up when debugging:
No define call received from module Presentation/Scripts/TFS/TFS.DataServices. This might be a problem.
What can I do to correct this?Hi Brian,
I'd like to know if you see any error message in the pages of team web access. Also check event logs to see if there any useful information.
For this situation, you can have a check whether your upgrade without issue. Run TFS best practice analyzer to check if there any configuration issues. Make sure you have configured TFS 2013 features after upgrading. Refer to this
page for more information. If the issue still exist after taking the methods, please elaborate more details about your scenario with screenshots.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Can't import photos after upgrade to Tiger 10.4.8
After upgrading from Panther to Tiger I can no longer import photos to iPhoto 4 from my camera. I get error messages that say "Unreadable files: 240. The following files could not be imported (they may be unrecognized file type or the file may not contain valid data). When I go to the directory they are located in, I see a bunch of JPG files, but when I try to open them I get a message from Preview saying it may be corrup or a file format Preview doesn't recognize.
I can view the photos that were in iPhoto prior to the OS upgrade without any problem.Hi, hope I've caught this discussion before it's ended.
Been getting "Unreadable files. The following files could not be imported (they may be unrecognized file type or the file may not contain valid data" ... but then ...
Was having problems with my hard drive and was about to back up my iPhoto Library when I checked the folder size with 'Apple i' and the 'lock' option was ticked. I definitely didn't option it. I've added images to iPhoto with this option unchecked and they've all gone in fine. Fantastic.
I too think my problems started after Tiger upgrade back last Autumn, loaded some pics in iPhoto at that time, deleted from camera and went back to iPhoto - none there!
Try this option, hope it works for someone else.
G4 733mhz Mac OS X (10.4.8) iMac Special Edition, Mac Plus
G4 733mhz Mac OS X (10.4.8) iMac Special Edition, Mac Plus -
Loads Issue after Upgrade in Production system
Hi Guys,
Yesterday we did 4.6c to Ecc6.0 upgrade,
After As a BW Team member i activate my BW Source system and Replicate the whole D/S, i Activate all the Transfer rules using RS_TRANSTRU_ACTIVATE_ALL. Then i started Loads through Process Chains but Previously loads are taken 20-40 min max right now it's takeing 3-5hours,
when i verify the detail steps in monitor step still Extractor level only, When i go to the RSA3 in Ecc 6.0 I can see the Data. but here i hav't see the data after 3 hours.
please suggest me wht r the steps i have to do after upgrade...
Thank you,
DSTHi,
You might want to check your SMQS settings... also monitor closely transaction SM58 in the source system.... I encountered the same thing during upgrade and had to schedule a job every 10mins or so to trigger the push of the IDocs.
Hope this helps.
Cheers,
Gimmo
Maybe you are looking for
-
Can you advice to a configurations of a new desktop to work?
Hi friends I´m not an expert in computer specifications (at true I have just an overall knowledgment about this) and I do not want to compare computer manufactured by specific companies (this is not the intention of this post). We work with Dell comp
-
Hard drive not showing up at all?
I have an external hard drive that is not being recognized by the computer. It doesnt show up on the desktop nor on Disk Utility? How can i fix this?
-
Hi 2 all Anybody know that how to fetch open invoices in 11i and these invoices balances should be match with Supplier Statement of Account Report. Thanks, Zulqarnain
-
Problem with connecting to Small Business server 2011 on Z10
I cannot connect my Z10 on Vodafone to my small business server 2011 to receive or send email. No problem with my IOS device. I understand this may be an active sync issue. Can anybody point me in the direction of some sensible advice /guidance to r
-
How do I send Plain Text email and view HTML email as Plain text
On the Z10, how can I send a plaintext email message?And how can I view an email message as plain text?