I can't make a call with my I-phone 4

My phone does not receive or can be used to make a call - it receives sms.
When calling a nuber it does not ring - but freezes an has to be turned off to delete the number is seems to be calling all the time

First try resetting your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

Similar Messages

Good day, I can not make video calling with my MAC PRO 15 with FB Mountan Lion operating system how can I do?    you can you help me? thank you very much

good day,
I can not make
video calling
with my MAC PRO 15
with FB
Mountan Lion operating system
how can I do?
   you can you help me? thank you very much

francesco marraffa wrote:
good day,
I can not make
video calling
with my MAC PRO 15
with FB
Mountan Lion operating system
how can I do?
   you can you help me? thank you very much
Are you running your MacBook Pro off WiFi or Ethernet?
Pete

Can't make a call with Siri

Can't make a call with Siri, it says "calling x..." then "sorry, i cant call the mobile number of x..."

According to this forum: http://forum.lowyat.net/topic/2175165/all, it seems that Siri is expecting a 7-8 digit phone numbers excluding the country code and area code, so adding an extra "0" digit or two at the back of the phone number may be able to fix your problem. The phone number should still connect correctly. Try that, it works for me in Indonesia where some phone numbers are still 6 digits.
Hindra

Can't make Offnet Calls with Video Advantage on

I am no expert so I could be missing something basic. However, I have a Cisco phone that is logged in and is enabled for video. I installed the Video Advantage and all works well. I can make onNet calls with Video advantage on. However, I cannot make offnet calls. If I exit video advantage I can once again make offNet calls.
Any Ideas?
Ryan

Have you tried this:
http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a0080569b65.shtml
Best regards.

TS4079 I can only make international calls with siri, not local calls

I live in Burundi, with the country code +257. I can make calls to the US, Canada and Europe but I can't make local calls. I have tried all the troubleshooting tips and tricks, checked my settings etc. Any ideas?

You also posted this on an iPhone forum. Not sure why you posted it here on an iPad forum.

Can't make a call from my I phone Always say call failed

Hello
i have a problem with my I phone that it new phone and i didn't use it until now but i have a problem with it that i can't make a call always say call failed , i changed the sim card but i still have the same problem .
so can you please help me

First try resetting your phone:
Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

How can I make a call with my iPad in Nigeria

How can I make calls with my iPad in Nigeria? Also, why is Nigeria not listed among the Region on iPad?

You can try downloading them as explained here:http://support.apple.com/kb/ht2519. (This is not available in all countries, and must be permitted by the movie studio.)
Otherwise, sync them to your iPad by selecting them on the Movies tab of your iTunes sync settings and syncing.

Can't make a call with my 8130

I just noticed today that I can't make calls. Everytime I try to make a call it says "only emergency calls are allowed"
I can send an SMS and when I try to call my cell from another phone it goes to the msg after one ring but my BB wont ring though

Only emergency calls allowed usually indicates a telecom carrier issue. Make sure the indicator near your signal strength is in capitals letters, it should be something like GPRS, EDGE, or 1XEV. If the indicator is in lower case, it means the BB has detected the carrier, but is not being allowed into their network. The telecoms are required by law to allow 911 calls to go through, which accounts for the message you are seeing. If you are roaming, it may be that your home telecom does not have a roaming agreement with the telecom you are currently latched onto.
A couple of things to try:
-Pop the battery out for a few seconds, then put it back in. This will reset the device and all connections, forcing it to reconnect again. This will often fix errors caused by a bad tower connection.
-If you are in your home service area, try resending the registration signal using Options/Advanced Options/Host Routing Table, click for the menu and select Register Now
-If you are roaming, see if there are other carriers in the area you are in using Options/Mobile Network
If none of these work, you are probably going to have to contact your carrier.
posted by DigitalFrog
WARNING: May contain traces of nuts.

Can't make this call with Unlimited World trial?

Trying to make a call to Mexico with +52 and am seeing the insufficient credit message but I just got on the Unlimited World trial.

According to this forum: http://forum.lowyat.net/topic/2175165/all, it seems that Siri is expecting a 7-8 digit phone numbers excluding the country code and area code, so adding an extra "0" digit or two at the back of the phone number may be able to fix your problem. The phone number should still connect correctly. Try that, it works for me in Indonesia where some phone numbers are still 6 digits.
Hindra

Can't make international calls with Siri?

I use Siri (in English) and when I try to make it call someone in a specific foreign country I'm having some issues. It works for all national calls and when I phone SOME foreign numbers too (from Australia etc).
All my numbers (national or not) have the +country code before it and it works perfectly when calling from my contact list, but a few of them don't work when I tell siri to call them: "Sorry, I can't call (name of the contact)". It doesn't give me a reason.
The number is correct and I phone it several times and it works, but still Siri won't call it, it recognizes the contact and their number, tries to call it and then it says it can't.
The number has the +country code of 2 digits, and then the normal 10 digits number (just like the national numbers I usually call and THEY WORK).
Is Siri not allowed to make calls to specific countries? If so, what are these?
Note that it can call national numbers and also some international numbers I have but only to SOME countries!)
Thanks!! Please help!

You also posted this on an iPhone forum. Not sure why you posted it here on an iPad forum.

Can I make a call with Ipad 4 WiFi + Celluar

I brought Ipad4 Retina display WiFi Cellular, Having mindset that I can use in emergency as phone. But I don't see any options to make a call other than FaceTime.

There are 3rd party Telephone VOIp apps available similar to facetime audio that will allow you to place a call over the internet but an ipad is not a cellular phone, its cellular function is for data only not voice which is why you see no options for it.

Can you make VOIP Calls with an iPod Touch ?

I know you can surf the web.
Can you use skype or other browser based phone companies?
Are you Sure? Why or Why not?

no you cant, yes im sure because there have been many posts asking the same thing in fact the most recent was a few das ago. And the reply is the same No , and why well ask skype that question. but generally there is no way for 3rd parties to create native apps to run on the ipod touch which will change in February. So wait till then contact skype commenting that you want this support. then leave feedback for apple at the link below cause they dont read these forums
Also another way of being sure is to google for something like this.. I am sure you have tried that right? Why or why not?
http://www.apple.com/feedback/ipodtouch.html

Can't make outgoing call with Skype Connect

I have my Asterisk PBX configured with Skype Connect using SIP with TLS and SRTP. Most of my outgoing calls go through, but sometimes I can't get call out. I was able to leave asterisk console up and collect verbose and sip debug data. Can somebody help me diagnose why my calls aren't going through?
I've changed my external IP (I'm behind a NAT'd firewall) to 1.2.3.4 and my SIP profile's user ID to 11111111111111. and my domain name to test.com. If someone working for Skype needs that information they can email me and I'll send it privately.
My config:
[general]
context=default_context
allowguest=no
alwaysauthreject=yes
allowoverlap=no
udpbindaddr=0.0.0.0
tlsenable=yes
tlsbinddir=0.0.0.0
tlscertfile=/usr/local/asterisk/etc/asterisk/keys/asterisk.pem
tlscafile=/usr/local/asterisk/etc/asterisk/keys/ca.crt
tlscipher=ALL
tlsclientmethod=tlsv1
tcpenable=yes
tcpbindaddr=0.0.0.0
transport=udp,tcp,tls
srvlookup=yes
dynamic_exclude_static = yes
buggymwi=yes
contactpermit=192.168.1.0/24
register => tls://111111111111111:[email protected]
[skype]
type=friend
context=from-skype
dtmfmode=rfc2833
host=sip.skype.com
username=11111111111111
fromuser=11111111111111
secret=abcd12345
disallow=all
allow=ulaw
allow=alaw
nat=yes
fromdomain=sip.skype.com
insecure=port,invite
transport=tls
srtpcapable=yes
encryption=yes
SIP Debugging enabled
[2012-08-23 19:22:33] NOTICE[16552]: chan_sip.c:13465 sip_reregister: -- Re-registration for [email protected]
> doing dnsmgr_lookup for 'sip.skype.com'
> ast_get_srv: SRV lookup for '_sips._tcp.sip.skype.com' mapped to host 1.sip.skype.com, port 5061
REGISTER 11 headers, 0 lines
Reliably Transmitting (NAT) to 63.209.144.201:5061:
REGISTER sip:sip.skype.com:5061 SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK2726fcb8;rport
Max-Forwards: 70
From: <sip:[email protected]>;tag=as6edf93cf
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 32495 REGISTER
User-Agent: Asterisk PBX 10.5.2
Authorization: Digest username="11111111111111", realm="sip.skype.com", algorithm=MD5, uri="sip:sip.skype.com:5061", nonce="5036b5770000182c78c1d1909cfd5c74e33f033c952d240d", response="81001ceacd91b16ebb956d3c55991471"
Expires: 120
Contact: <sip:[email protected]:5061;transport=TLS>
Content-Length: 0
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 200 OK
From: <sip:[email protected]>;tag=as6edf93cf
To: <sip:[email protected]>;tag=c990d13f-90f7a10d-0-55cb59a8-0
Call-ID: [email protected]
CSeq: 32495 REGISTER
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK2726fcb8;rport=50541;received=1.2.3.4
Expires: 45
Contact: <sip:[email protected]:5061;transport=tls>;expires=45
Content-Length: 0
<------------->
--- (9 headers 0 lines) ---
Scheduling destruction of SIP dialog '[email protected]' in 32000 ms (Method: REGISTER)
[2012-08-23 19:22:33] NOTICE[17932]: chan_sip.c:21399 handle_response_register: Outbound Registration: Expiry for sip.skype.com is 45 sec (Scheduling reregistration in 30 s)
<--- SIP read from UDP:192.168.1.16:5060 --->
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 101 INVITE
Max-Forwards: 70
Contact: "Scott's Office" <sip:[email protected]:5060>
Expires: 240
User-Agent: Cisco/SPA504G-7.5.2b
Content-Length: 234
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, UPDATE
Supported: replaces
Content-Type: application/sdp
v=0
o=- 88651316 88651316 IN IP4 192.168.1.16
s=-
c=IN IP4 192.168.1.16
t=0 0
m=audio 16484 RTP/AVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-15
a=ptime:30
a=sendrecv
<------------->
--- (14 headers 12 lines) ---
Sending to 192.168.1.16:5060 (NAT)
Using INVITE request as basis request - [email protected]
Found peer 'scott_office' for 'scott_office' from 192.168.1.16:5060
== Using SIP RTP CoS mark 5
Found RTP audio format 0
Found RTP audio format 8
Found RTP audio format 101
Found audio description format PCMU for ID 0
Found audio description format PCMA for ID 8
Found audio description format telephone-event for ID 101
Capabilities: us - (ulaw), peer - audio=(ulaw|alaw)/video=(nothing)/text=(nothing), combined - (ulaw)
Non-codec capabilities (dtmf): us - 0x1 (telephone-event|), peer - 0x1 (telephone-event|), combined - 0x1 (telephone-event|)
Peer audio RTP is at port 192.168.1.16:16484
Looking for 19739928881 in home (domain asterisk.test.com)
list_route: hop: <sip:[email protected]:5060>
<--- Transmitting (NAT) to 192.168.1.16:5060 --->
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62;received=192.168.1.16;rport=5060
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 101 INVITE
Server: Asterisk PBX 10.5.2
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Contact: <sip:[email protected]:5060>
Content-Length: 0
<------------>
-- Executing [19739928881@home:1] Dial("SIP/scott_office-000000b0", "SIP/skype/+19739928881") in new stack
== Using SIP RTP CoS mark 5
Audio is at 9302
Adding codec 100003 (ulaw) to SDP
Adding codec 100004 (alaw) to SDP
Adding non-codec 0x1 (telephone-event) to SDP
Reliably Transmitting (NAT) to 63.209.144.201:5061:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport
Max-Forwards: 70
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>
Contact: <sip:[email protected]:5061;transport=TLS>
Call-ID: [email protected]
CSeq: 102 INVITE
User-Agent: Asterisk PBX 10.5.2
Date: Thu, 23 Aug 2012 23:22:34 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Type: application/sdp
Content-Length: 370
v=0
o=root 1671301052 1671301052 IN IP4 192.168.1.15
s=Asterisk PBX 10.5.2
c=IN IP4 192.168.1.15
t=0 0
m=audio 9302 RTP/SAVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:TRh/HeKozlBO/mmYHNTiS5KMnefVI0aRicLoDNjb
-- Called SIP/skype/+19739928881
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 100 Trying
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>
Call-ID: [email protected]
CSeq: 102 INVITE
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport=50541;received=1.2.3.4
Contact: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
Content-Length: 0
<------------->
--- (8 headers 0 lines) ---
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 407 Proxy Authentication Required
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Call-ID: [email protected]
CSeq: 102 INVITE
Proxy-Authenticate: Digest realm="sip.skype.com", nonce="5036bb5800012cdd3d20e5090cc200805f7d0bbd58318e9e", algorithm=MD5
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport=50541;received=1.2.3.4
Content-Length: 0
<------------->
--- (8 headers 0 lines) ---
set_destination: Parsing <sip:[email protected]> for address/port to send to
set_destination: set destination to 63.209.144.201:5060
Transmitting (NAT) to 63.209.144.201:5061:
ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1c3f16ee;rport
Max-Forwards: 70
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Contact: <sip:[email protected]:5061;transport=TLS>
Call-ID: [email protected]
CSeq: 102 ACK
User-Agent: Asterisk PBX 10.5.2
Content-Length: 0
Audio is at 9302
Adding codec 100003 (ulaw) to SDP
Adding codec 100004 (alaw) to SDP
Adding non-codec 0x1 (telephone-event) to SDP
Reliably Transmitting (NAT) to 63.209.144.201:5061:
INVITE sip:[email protected] SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport
Max-Forwards: 70
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>
Contact: <sip:[email protected]:5061;transport=TLS>
Call-ID: [email protected]
CSeq: 103 INVITE
User-Agent: Asterisk PBX 10.5.2
Proxy-Authorization: Digest username="11111111111111", realm="sip.skype.com", algorithm=MD5, uri="sip:[email protected]", nonce="5036bb5800012cdd3d20e5090cc200805f7d0bbd58318e9e", response="6efb0e37178bae868f0a1e0ddf110e3c"
Date: Thu, 23 Aug 2012 23:22:34 GMT
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Type: application/sdp
Content-Length: 370
v=0
o=root 1671301052 1671301053 IN IP4 192.168.1.15
s=Asterisk PBX 10.5.2
c=IN IP4 192.168.1.15
t=0 0
m=audio 9302 RTP/SAVP 0 8 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=silenceSupp:off - - - -
a=ptime:20
a=sendrecv
a=crypto:1 AES_CM_128_HMAC_SHA1_80 inline:TRh/HeKozlBO/mmYHNTiS5KMnefVI0aRicLoDNjb
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 100 Trying
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Call-ID: [email protected]
CSeq: 103 INVITE
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport=50541;received=1.2.3.4
Contact: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
Content-Length: 0
<------------->
--- (8 headers 0 lines) ---
Really destroying SIP dialog '[email protected]' Method: REGISTER
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 180 Ringing
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Call-ID: [email protected]
CSeq: 103 INVITE
User-Agent: SipGW 8
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport=50541;received=1.2.3.4
Contact: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
Content-Length: 0
<------------->
--- (9 headers 0 lines) ---
list_route: hop: <sip:[email protected]:5061;maddr=63.209.144.201;transport=tls>
-- SIP/skype-000000b1 is ringing
<--- Transmitting (NAT) to 192.168.1.16:5060 --->
SIP/2.0 180 Ringing
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62;received=192.168.1.16;rport=5060
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>;tag=as3f27fa61
Call-ID: [email protected]
CSeq: 101 INVITE
Server: Asterisk PBX 10.5.2
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Contact: <sip:[email protected]:5060>
Content-Length: 0
<------------>
<--- SIP read from TLS:63.209.144.201:5061 --->
SIP/2.0 408 Request Timeout
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Call-ID: [email protected]
CSeq: 103 INVITE
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport=50541;received=1.2.3.4
Content-Length: 0
<------------->
--- (7 headers 0 lines) ---
[2012-08-23 19:22:45] WARNING[17932]: chan_sip.c:20947 handle_response_invite: Re-invite to non-existing call leg on other UA. SIP dialog '[email protected]'. Giving up.
set_destination: Parsing <sip:[email protected]> for address/port to send to
set_destination: set destination to 63.209.144.201:5060
Transmitting (NAT) to 63.209.144.201:5061:
ACK sip:[email protected]:5061;maddr=63.209.144.201;transport=tls SIP/2.0
Via: SIP/2.0/TLS 192.168.1.15:5061;branch=z9hG4bK1b988ba5;rport
Max-Forwards: 70
From: "Scott's Office" <sip:[email protected]:5060>;tag=as049830bd
To: <sip:[email protected]>;tag=c990d13f-13c4-5036bb3b-714198b9-32d150b4
Contact: <sip:[email protected]:5061;transport=TLS>
Call-ID: [email protected]
CSeq: 103 ACK
User-Agent: Asterisk PBX 10.5.2
Content-Length: 0
Scheduling destruction of SIP dialog '[email protected]' in 32000 ms (Method: INVITE)
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing [19739928881@home:2] Hangup("SIP/scott_office-000000b0", "") in new stack
== Spawn extension (home, 19739928881, 2) exited non-zero on 'SIP/scott_office-000000b0'
Scheduling destruction of SIP dialog '[email protected]' in 32000 ms (Method: INVITE)
<--- Reliably Transmitting (NAT) to 192.168.1.16:5060 --->
SIP/2.0 503 Service Unavailable
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62;received=192.168.1.16;rport=5060
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>;tag=as3f27fa61
Call-ID: [email protected]
CSeq: 101 INVITE
Server: Asterisk PBX 10.5.2
Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH
Supported: replaces, timer
Content-Length: 0
<------------>
<--- SIP read from UDP:192.168.1.16:5060 --->
ACK sip:[email protected] SIP/2.0
Via: SIP/2.0/UDP 192.168.1.16:5060;branch=z9hG4bK-819ce62
From: "Scott's Office" <sip:[email protected]>;tag=9961686dacab532ao0
To: <sip:[email protected]>;tag=as3f27fa61
Call-ID: [email protected]
CSeq: 101 ACK
Max-Forwards: 70
Contact: "Scott's Office" <sip:[email protected]:5060>
User-Agent: Cisco/SPA504G-7.5.2b
Content-Length: 0
<------------->
--- (10 headers 0 lines) ---
Really destroying SIP dialog '[email protected]' Method: INVITE
Really destroying SIP dialog '[email protected]' Method: ACK

I wound up calling skype support. This is the final sip.conf looks like. Hope it helps. Good luck.
Scott
[general]
context=default_context
allowguest=no
alwaysauthreject=yes
allowoverlap=no
udpbindaddr=0.0.0.0
tlsenable=yes
tlsbinddir=0.0.0.0
tlscertfile=/usr/local/asterisk/etc/asterisk/keys/asterisk.pem
tlscafile=/usr/local/asterisk/etc/asterisk/keys/ca.crt
tlscipher=ALL
tlsclientmethod=tlsv1
tcpenable=yes
tcpbindaddr=0.0.0.0
transport=udp,tcp,tls
srvlookup=yes
dynamic_exclude_static = yes
buggymwi=yes
contactpermit=192.168.1.0/24
register => tls://[email protected]
[skype]
type=friend
context=from-skype
dtmfmode=rfc2833
host=sip.skype.com
username=user
fromuser=user
secret=pass
disallow=all
allow=ulaw
allow=alaw
nat=yes
fromdomain=sip.skype.com
insecure=port,invite
transport=tls
srtpcapable=yes
encryption=yes

Can't make command call with gmc truck

Hi, I have an iPhone 4s, it works when synced to the truck and Incan talk when i dial but when I try to use the call and say the name or number, Siri takes over and then in hangs up and says call ended. Anyone have any luck with this.

According to this forum: http://forum.lowyat.net/topic/2175165/all, it seems that Siri is expecting a 7-8 digit phone numbers excluding the country code and area code, so adding an extra "0" digit or two at the back of the phone number may be able to fix your problem. The phone number should still connect correctly. Try that, it works for me in Indonesia where some phone numbers are still 6 digits.
Hindra

HT201269 I can't make any calls from my new phone

I just got my phone on warranty, and my carrier is not showing on the top right screen. Help me

I assume you put a SIM card in your replacement phone. If so, youll need to contact your carrier.

I can't make a call with my I-phone 4

Similar Messages

Maybe you are looking for