I can't make a wireless connection.

Just installed snow leopard and had no real issues with file transfer from tiger, but unable to make a wireless connection with airport.

the Netgear needs to have WPA2 security, as the iPhone does not do WEP.
Also be sure IPv6 is enabled, as thjs is what the iPhone defaults too.

Similar Messages

How can I make my wireless connection secure?

My wireless icon states it is unsecure, how can I change it to secure?

Hi liarolink, you can read about how to secure your network here as well as FAQs about your device..
Regards.
The Search Function is your friend.... and Google too.
How to Secure your Network
How to Upgrade Routers Firmware
Setting-Up a Router with DSL Internet Service
Setting-Up a Router with Cable Internet Service
How to Hard Reset or 30/30/30 your Router

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? No firewall involved.

I have two facetime users, both connecting to our enterprise wireless network (Cisco WCS) and they can't make a facetime connection from IPAD to IPAD. Are there any apple protocols or other settings that need to be enabled on WCS? There is no firewall inbetween the two connections, as this is all on our internal network.
Both devices can connect to the network, but when they try to talk to each other they can't make the connection.
Thanks.

If anyone ever comes across this and has the same issue, here's what I did to fix it:
My Linksys router has a Network Mode setting, and I had to change it from "Mixed" to "Wireless-G only". (I would've used N but one of the NICs in my house is too old to support it.) Anyway, after making this change, Facetime works fine on the phone. Hope this helps someone else!

I can not make a wireless bridge in the band 2.4 Linksys wrt1900ac

I can not make a wireless bridge in the band 2.4 I make the same settings on band 5 and runs perfect

I'd check to see if the 1900AC can bridge two WiFi connections at the same time. It may only beable to bridge one or the other radio at a time. I know that with the 5Ghz radio is bridged on the 1900AC, the 2.4Ghz radio is running and working as a wireless AP.

How can I make my wireless keyboard "discoverable" after replacing the batteries?

How can I make my wireless keyboard "discoverable" after replacing the batteries? Bluetooth keyboard setup said my "keyboard is not connected" when I turned it on today.....assuming the problem was batteries, I replaced them.

I've got it working now.....

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview.

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End Class

How can I make my adodc connect faster to my SQL Server? It's taking a minute (so long) before I can view thousand of record in my listview. Please anyone help me.
I'm using this code:
Public Class McheckpaymentNew
Private cn As New ADODB.Connection
Private rs As New ADODB.Recordset
Private Sub McheckpaymentNew_Load(sender As Object, e As EventArgs) Handles MyBase.Load
Try
cn.ConnectionString = "DSN=database; UID=user; PWD=password"
cn.Open()
rs.CursorLocation = ADODB.CursorLocationEnum.adUseClient
rs.CursorType = ADODB.CursorTypeEnum.adOpenStatic
rs.LockType = ADODB.LockTypeEnum.adLockBatchOptimistic
Catch ex As Exception
MsgBox("Failed to Connect!, Please check your Network Connections, or Contact MIS Dept. for assistance.", vbCritical, "Error while Connecting to Database.."
End
End Try
End Sub
End Class

Can we make a data connection using a WADL file?

Can we make a data connection using a WADL file for REST web services?

Can we make a data connection using a WADL file for REST web services?

Hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad

hi you know i can't make the MIDI connection network from my iMac to my iPad 3 appears 192.168.1.69:5004 refused the connection request. ill appreciate so much your help I'm trying to do it with the animoog for iPad

Hi James and welcome.....
Try the help here for Windows 7.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
Carolyn

Can You make a wireless network.....?

Can You make a wireless network with just a router and the Airport extreme?

You can make a wireless network with just the AirPort Extreme or any other wireless router.

New Netgear Router and now I can't get a wireless connection for my K5400 printer.

I got a new Netgear Router and now I can't get a wireless connection on my Officejet Pro K5400 printer. Anyone know what I can do to fix this. Using Windows XP

On the printer: Setup > Network > Restore Defaults. From the same Network menu, run the Wireless Setup Wizard.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Can i make a wireless web without a router ?

Can i make a wireless web without a router ?

Yes. A Mac or PC can be configured to provide a wireless network if either are equipped with a wireless adapter.

Can't use a wireless connection.

I have just installed windows 10 technical preview build 10041 and I am unable to use a wireless connection to use the internet or for downloading updates. Every time I open Internet explorer or try to download updates my BThub 4 disconnects and wont reconnect.
I have had this problem with build 9926 and have had to use a wired connection, which also will sometimes disconnect as well. I also had this problem with earlier builds. Although with earlier builds the problem was fixed after downloading the updates for
those builds. Am I the only one with this problem, as I haven't been able to find any mention of this anywhere.
cookiecat310.

10061 is the current build for the fast ring, it has corrected several problems with mobile networking
for example my netbook has a qualcomm gobi 2000 and it was not recognized until 10061 when windows immediately wanted to go online via cellular after the wifi was down
expect to see issues, after all this is a preview
use the feedback tool to report issues
Place your rig specifics into your signature like I have, makes it 100x easier!
Hardcore Games Legendary is the Only Way to Play!
Vegan Advocate How can you be an environmentalist and still eat meat?

Can't get a wireless connection on a T43 when using Access Connections

This week I had to set up a laptop for one of the partners of our firm. Since I can no longer use System Update to get all the lenovo apps I had to download everything from the website. Everything seemed to be going fine until I noticed that the wireless card wasn't connecting through Access connections. It only works through Windows connection utility I have the latest version of Access Connections and the correct driver for the wireless card but it just won't work. I remember that when system update was up and running I could download a seperate driver from lenovo that would make the wireless card work with Access Connections. Unfortunately, I can't find it on the website. Can anyone help me?

Hello eaglesfan20, welcome to Lenovo forums!
Please tell us your system type, OS and used AC version.
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

Can you extend a wireless connection from one time capsule to another wirelessly?

We have two time capsules, one is connected to our modem and is transmitting a wireless network. It is in a really out of the way location, and we would like to set up a network printer in a different location on that network, so we got another time capsule (to hook up to the printer at a different location). Could we possibly extend the wireless network to the second time capsule with the printer attached so we could use the printer as a network printer? (If yes, HOW?)

Could we possibly extend the wireless network to the second time capsule
Yes, if the second Time Capsule is located where it can receive a good wireless signal from the other Time Capsule.
To test, move a laptop to the proposed location of the second Time Capsule. Log on using wireless on the laptop and spend some time to make sure that you have a good, solid reliable Internet connection. If you do, then the Time Capsule should work well at that location.
You would use AirPort Utility to configure the second Time Capsule to "Extend a wireless network". If you open AirPort Utility now as a test, can you "see" both Time Capsules there?
The reason that we ask is that you might need to check some settings on the "main" Time Capsule to be able to configure the second Time Capsule correctly.
with the printer attached so we could use the printer as a network printer?
If the same printer works on your Time Capsule now, then it should work on the second Time Capsule. If it is working now, you may not even need to re-install it again when it is connected to the second Time Capsule.
This is one of those times when you will not know if something will work until you actually try.

How can I make my wifi connection automatic?

Hi All,
we have a Timemachine and have a network setup on it. How can I make my connection to that network automatic when I turn on my macbook and eliminate all other close by net works? please email me at: [email protected]
thnks
Ken

i would like to know how to make my wifi connection invisible to others
This is not really possible, since there are any number of free utilities on the Internet that will reveal a "hidden" network in seconds. Anyone who wants to see your network will be able to do so very quickly and easily.
iOS devices like the iPhone and iPad often have difficulty connecting to a "hidden" network as well.
If you still want to do this......
Open Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Wireless tab at the top of the next page
Click the Wireless Options button near the bottom of the page
Enter a check mark in the box next to Create hidden network
Click Save
Click Update at the lower right of the window and allow a minute for the Time Capsule to restart

I can't make a wireless connection.

Similar Messages

Maybe you are looking for