I can't make transport controls on Axiom 49 work in LE7

Newby here . . .
I have RTFM and lurked on several boards, but I can't find an answer.
I can get the sliders, knobs, buttons, etc. to do the right thing on LE7's mixer with an M-Audio Axiom 49, but I can't figure out what LE7 wants to "hear" to get the transport controls (play, pause, record, and stop are all I really need) to work.
Help?

http://www.m-audio.com/index.php?do=support.faq&ID=df2850a8668de948db07d1acd7b10 cbe
Be sure to read the addendum at the bottom

Similar Messages

I can't make my Apple TV to work both with wireless or hard wire at the same time

I can't make my Apple TV to work both via wireless and hard wires Ethernet at the same time.

Setup Apple TV with iPad
1. Setup Apple TV
(a) Connect cables and power cord
(b) Turn on TV and select Input
(c) Configure Apple TV e.g. Language, network
2. Setup Home Sharing on iPad
Settings>Music/Video>Home Sharing
3. Setup Home Sharing on Apple TV
Settings>Computer>Turn on Home Sharing. Enter Apple ID and Password
4. Pair Apple TV with Remote Control
General>Remotes>Pair Apple Remote

How can I make Adobe Photoshop 5.0LE work on my new PC running Windows 8?

How can I make Adobe Photoshop 5.0LE work on my new PC running Windows 8?

Adobe Photoshop LE is too old. I do not think it will work in compatability mode. It was made circa 1998 before XP. It is time to pony up for new software. Adobe Photoshop Elements is inexpensive and provides a world of capabilities undreamt in 1998.

Transport Controls (Playback) Not Working Premiere Pro CC 2014

I've tried everything for the past couple of days and I can not seem to get my playback controls to work for Premiere Pro CC 2014. Help! Please!

Please see this thread. I covers at least a couple of solutions that have worked for some users: Re: Playback (transport) controls not working

Can I make the Help Center application work like other apps

Hi, I've searched all over the place to find the commands I need to enter into Terminal to make the Help Center application work like an ordinary application, ie so that a help center window can remain open whilst using the appliction it refers to, I did it a long time ago on my Imac using Snow Leopard, but I just can't remember what I did or where I found the Terminal commands to do it (Old age is creeping up on me ). I would like to do the same for my mid 2012 MacBook Air running Mountain Lion any help would be greatly appreciated thanks Peter

OK I finally found it :- open Terminal and type the following:-
defaults write com.apple.helpviewer DevMode -bool true

I can't make my new printer copier work because it's always saying about the pop up blocker.

i can't make my printer work because the pop up blocker won't let it to do the job. How can I make it work without the pop up blocker.

See this: <br />
http://kb.mozillazine.org/Problems_printing_web_pages

How can I make my PowerPC/Windows programs work in Mac OS X Lion?

In a few months I will be buying a MacBook Pro and I have a lot of old games that I would like to be able to play on it. But those games are Windows/PowerPC only and Mac OS X Lion does not support PowerPC. How can I make my old programs work in Mac OS X Lion?

For porting Windows programs to Mac OS X, you can check out Wineskin. It can be very simple to very hard to do though... its all a case by case basis. The older the game is the more likely you are to get it to work easily though.

HT4689 Can we make mission control not stack the windows of the same app?

I often have multiple Word windows open and it's very hard to find the one I need when they are stacked in Mission Control. I like the fact that with a four-finger swipe you can see all the open programs, but it's not quite useful if apps are stacked (so I can't find which is which), and minimized apps apps are not shown.
In comparison, MS Windows makes it easier to locate an open program although less fancy-looking.

Hi keclear,
If you would prefer that Mission Control not stack the open windows for each application, you may want to turn off the "Group windows by application" setting. You may find the following article helpful:
OS X Mountain Lion: Mission Control preferences
http://support.apple.com/kb/PH10850
Cheers,
- Brenden

How can I make a control inside a loop in a subVI change value when the calling VI's control changes?

Hi.
I think this is a pretty basic LV question, but I have not been able to find a good solution.
I am attaching VIs that show the problem I am having, but obviously, the real application is a lot complicated, which forces me to try to do it this way.
The issue is: I have a subVI with a Boolean control inside a loop. When the control is true I want some action to take place. When the subVI is run on its own, it works fine, acting properly when I set the boolean control to true via the LV FPGA interface from the host. However, when I use it as a subVI, in which the top-level VI calls several instances of the subVI, I have the Boolean controls in the top level VI. What is happening is that the false Boolean value with which the top-level VI starts is passed into the subVIs, and not updated, even though the control is inside the loop.
Can any one suggest a good solution?
Thanks,
AlejandroZ
Attachments:
CallingVI.vi ‏7 KB
subVI.vi ‏8 KB

Hi.
I know the example I posted might seem silly, but it was just to illustrate the problem I am having. In reality this is the application:
I have some LV FPGA code which uses a few FPGA IO to implement a serial link to communicate with a device. Most of the time we are getting data from the device, so the serial link is used to send a read command, read in the data and put it into a FIFO. However, I also wanted the VI to support sending data to the device, so I added an array control to put the data you want to send, and a boolean control to tell it you want to send it.
Since sending and receiving data are done using the same FPGA IO, they cannot be independent operations, because they would garble each other. Therefore, in the subVI I have a loop in which I first read data if there is any to read, then check the boolean write control to see if there is data to write.
As I mentioned, this works perfectly for talking to a single device. However, we run into the issue of this topic when trying to replicate this for several devices.
One easy solution is to not have the loop in the subVI, and have it in the calling VI (I am favoring this simple solution right now). The only reason why I have not done this yet, is that the subVI has more than one loop, so I am going to have to create several subVIs. I just posted to see if there was an even simpler solution...
There have been some other possibly good solutions proposed here, though I am not sure if they work in LV FPGA.
Thanks for all your responses.
AlejandroZ

Avid MC Transport Control Surface now working in CS 5.5

Not sure if anyone is interested, but because Adobe doesn't have a EUCON integrated support, it greatly limits the control surfaces that can be used with it.
I googled a bunch of different things but in the end it seems like the general conclusion was that the MC Transport doesn't work with Premiere Pro, not a big deal if you don't have one, but really sucks if you do have one and use Premiere for a lot of your work.
However, following the age-old adage of "never say die" I finally figured out a work-around that has my Avid MC Transport working pretty darn good with Adobe Premiere CS 5.5 on my Mac.
I posted it here: on creative cow where you can see the whole thread: http://forums.creativecow.net/readpost/3/911511
Hi Andree,
I had the same problem but figured it out, you can see it here http://wp.me/p1hbRg-e
or I'll paste it here for you as well:
I recently made the switch from PC to MAC for the long-form documentary I'm making. A decision that so far, I definitely regret. But more on that later.
For the moment I thought I'd start posting notes about problems I've run into and solutions to them that I've found in case any one else runs into these same problems.
I purchased the Avid/Euphonix MC Transport for use in my editing as having a jog/shuttle definitely speeds things up remarkably once you are accustomed to them.
However I didn't notice that Adobe Premiere was not supported and this is my editing program of choice although I do have FCP and Media Composer 5.52.
I googled around and even contacted Euphonix/Avid support and no one seemed to have a solution.
In frustration I then ordered a Contour Shuttle Pro v2 (which is sort of like downsizing from a Porche to a Honda. Both great cars, but which one would you kick out of bed first? Exactly.)
So while waiting for international shipping I tried a bit of a wild idea and I installed the drivers for both the Bella Pro Premiere keyboard (which I don't have) and the Contour Shuttle (which I don't have either) and then began customizing the MC Transport commands to match the command keys in Adobe Premiere.
As a note; you might not need to do this on your system. I'm using a Mac 12 core and this workaround only worked once I installed those drivers but logically speaking you shouldn't need to do it.
And hey! It works!!!!
Some things aren't as perfect as they are in Avid or FCP such as the shuttle wheel shifting to different speeds smoothly. But damn! The jog wheel works perfectly.
Customizing the Soft Keys just involves ensuring that Adobe Premiere Pro CS 5.5 is open and then choosing the soft key around the wheel and once it is highlighted in the EUCON controller, then assigning a KEY command.
For example your center three keys above the jog wheel should have J, K, and L assigned accordingly.
And however you wish to customize it after that. I use for cutting at timeline (CTRL + K), next edit (page down), previous edit (page up) and it is working like a charm.
All the other soft keys including shift command respond the same.
To program the jog wheel. Select it and choose Command, select Wheel from the drop down, then select jog right and choose special command and pick "right arrow" and then repeat for select jog left and choose special command and choose "left arrow."
The shuttle you have to choose the shuttle and again add a wheel command and then in choose shuttle and create a new shuttle wheel command. Then from shuttle drop down, choose for Section 0 add key and set it to K (stop), then for Shuttle Section 1 add L key once and for each shuttle section add one more L key. Shuttle section 7 has LLLLLLL assigned to it.
For the shuttle -1 Section choose J and for each minus section following that add one more J.
It's not perfect but it certainly does what I need it to do!
Hope that helps anyone else out there.
Best,
Darius

Thanks Pepe, seems to be a quick workaround! (FWIW in Logic 7.1, the command I see is Logic→Preferences→Control Surfaces→Rebuild Defaults. I assume that's what you're referring to.)
It'd be great if Apple/Tascam fixed this, but it only takes a second to rebuild the devices, so it's no biggie.

Transport controls won't work with mouse....

Hi
Having been a long term Mac user with Avid and FCP I have now decided to move to Premiere on a PC.
I've just installed the Creative Cloud version and it all looks good. However, the mouse will not activate any of the device controls. (play, mark in, mark out etc.) I can make video play with the space bar, mark in and out with keyboard etc. any ideas?
Thanks.

Well, feel privileged! I've not heard of this problem before.
Now, occasional glitches with Wacom tablets, that comes up from time to time. Hope one of the techie types can give you some assistance. This would be rather an annoying limitation ...
Neil

How can i make my communities and email work on my...

everytime i try to get online at communities, it always says that communication error?.. what can i do to make it work??.. and also the email..

This topic has been discussed in-depth on this forum in multiple threads. The account iDs for the iTunes Store and for MobileMe/iCloud are not the same thing. The text strings used to login can be the same, but they do not have to be.
To enable iTunes Match on the iPhone you must be signed into the mobile iTunes store with the same account ID that was used in iTunes to activate iTunes Match. Go to Settings > Store to sign in.

How can I make the fittext.js plugin work?

Hello!
I'm a newbie on Edge, so please bear with me.
I've been trying to make the fittext.js plugin (http://fittextjs.com/) work on my project but is not doing anything in preview.
This is what I have on my Stage on creation complete:
yepnope( { load: "edge_includes/jquery.fittext.js" } );
$("h1").fitText();
I have my text elements as h1. I tried doing it with ids ( $("#title").fitText(); ) instead and I still get no result.
Am I missing something?
Thanks!

Solved by adding Sarah's scale-to-fit code. Can somebody check the page here and give me some feedback? Thanks! http://wrongtarget.com/patria/
My creationComplete looks like this now:
yepnope(
          nope:[
          'edge_includes/jquery.fittext.js',
          complete: init
sym.$("#Stage").css({ // Set the transform origin so we always scale to the top left corner of the stage
"transform-origin":"0 0",
"-ms-transform-origin":"0 0",
"-webkit-transform-origin":"0 0",
"-moz-transform-origin":"0 0",
"-o-transform-origin":"0 0"
function scaleStage() {
    var stage = sym.$('Stage'); // Set a reusable variable to reference the stage
    var parent = sym.$('Stage').parent(); // Set a reusable variable to reference the parent container of the stage
    var parentWidth = stage.parent().width(); // Get the parent of the stage width
    var parentHeight = $(window).height(); // Get the browser window height
    var stageWidth = stage.width(); // Get the stage width
    var stageHeight = stage.height(); // Get the stage height
    var desiredWidth = Math.round(parentWidth * 1); // Set the new width of the stage as it scales
    var desiredHeight = Math.round(parentHeight * 1); // Set the new height of the stage as it scales
    var rescaleWidth = (desiredWidth / stageWidth); // Set a variable to calculate the new width of the stage as it scales
    var rescaleHeight = (desiredHeight / stageHeight); // Set a variable to calculate the new height of the stage as it scales
    var rescale = rescaleWidth;
    if (stageHeight * rescale > desiredHeight) // Do not scale larger than the height of the browser window
                    rescale = rescaleHeight;
// Rescale the stage!
           stage.css('transform', 'scale(' + rescale + ')');
     stage.css( '-o-transform', 'scale(' + rescale + ')');
           stage.css('-ms-transform', 'scale(' + rescale + ')');
     stage.css('-webkit-transform', 'scale(' + rescale + ')');
           stage.css('-moz-transform', 'scale(' + rescale + ')');
     stage.css('-o-transform', 'scale(' + rescale + ')');
           parent.height(stageHeight * rescale); // Reset the height of the parent container so the objects below it will reflow as the height adjusts
// Make it happen when the browser resizes
$(window).on('resize', function(){
           scaleStage();
// Make it happen when the page first loads
$(document).ready(function(){
    scaleStage();
function init() {
fitText();

Can't make font bold, shortcut stopped working

In the last week or so a few of our users have no longer been able to use the keyboard shortcut to make some fonts bold even though you can go select the bold from the type menu so obviously the bold version is installed and active. After talking with others in our group, some of them have had this happen in the past and then things resolved on their own. I researched this and found the thread here
http://forums.adobe.com/message/2653026#2653026
which mentioned that some fonts don't contain the data to indicate that they contain a bold version, but that theory doesn't seem to apply in our situation. We use a set of corporate fonts that have not changed and the same version of the fonts are installed on all our computers, which are all cloned off a single image so set up is identical. Some users can make the fonts bold using shortcuts and others cannot, so I don't think it has anything to do with the font itself not containing the proper data or it wouldn't work on any of the computers. Also, if I switch to a different user on the same computer I am able to use the shortcut keys so again. Could there be any other reason why the shortcut keys would simply stop working? I've tried replacing InDesign's preference files and that does not work either. We are running CS4 on OS X 10.5.8.

[email protected] wrote:
Just wanted to follow-up. I have been in contact with Extensis regarding this issue and they were able to replicate it with several of our fonts. The very nice representative I've been working with said that the issue would be passed on to their product managers to review for a possible fix in a future release. Until then if you add your fonts in place rather than into the fontvault, your shortcuts keys in InDesign should work fine.
I'm having this issue on the latest version of InDesign. At first I thought it was related to Suitcase, but after updating Suitcase to the latest version, trashing all my prefs and FontVault, re-adding all my fonts, and clearing all my system's font caches, the problem still happens.
Then I realized it's not related to Suitcase at all, but to certain font families. I'm not sure what causes it, maybe it's because these families have a Roman, Regular, Bold, Extra Bold, Black, Condensed, Bold Condensed, etc. and it just doesn't know which one to pick, so it does nothing? It should at least toggle between Roman and Bold, though!
This is a very frustrating problem. Anyone know how to fix it? I even tried making a character style called "Bold" and setting a shortcut for it, but any keys I press to set the shortcut, it just beeps at me and nothing happens! Argh!

How can I make my iPhone 5 camera work? freezes

camera no longer works as it freeze. Any advise?

Hello gustavofromia
I have highlighted the Camera troubleshooting section in the iPhone Hardware troubleshooting article. If you are still having issues, look at the article for further troubleshooting options.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Camera isn't functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Thanks for using Apple Support Communities.
Regards,
-Norm G.

I can't make transport controls on Axiom 49 work in LE7

Similar Messages

Maybe you are looking for