I can't multi select in finder

I initially noticed that I was unable to multi select photos in Aperture. I turned off the One Primary feature but the problem remained.  Next I went to the Finder and tried it there. I put the Finder window into List view, selected a document, and held down the Shift key while selecting a second document down the list. The Finder acted as if I was not holding down the Shift key and only selected the second document.  Any ideas?  I have a 15" Retina MacBook Pro with the latest version of Mountain Lion.

I too have experienced that problem. You might try updating to 10.8.3, which was released today.
If the problem persists:
Change the view. If you were in icon view, change to list. Now see if it works.
Relaunch Finder or restart the computer.
If issues still persist, let me know more details and I'll try to reproduce the issue on my machine.

Similar Messages

  • Can't multi select image on Iphone

    Hello everybody!
    I write one program upload image from iPhone to server use HTTP request.
    Current, I use UIImagePickerController to select image and UIImageView to receive and diplay image. Then use UIImageJPEGRepresentation function to get NSData from UIImageView.
    I uploaded success image to server use NSURLConnection. But I have some question:
    1. Use UIImagePickerController to select image from iPhone, I only select one image. I can't multi select image from iphone. Each upload, I only uploaded 1 image.
    Which the way to select multi image to upload them to server in once time.
    2. I can't get file name and type (jpg, png,... ) of image, UIImagePickerController only return byte value of image. I can access width and height of image with byte value but can't get name and type of image.
    Wich the way to get name and type of image.
    3. I found 2 function are UIImageJPEGRepresentation and UIImagePNGRepresentation to covert UIImage to NSData. Current, I use UIImageJPEGRepresentation to convert to NSData:
    NSData *imageData = UIImageJPEGRepresentation(img, 1.0);
    I think if image is PNG will use UIImageJPEGRepresentation to convert to NSData. But in case image is GIF, BMP,.. which the function used?
    Size of imageData more than size of image. So, image upload in server has size more than data of image on Iphone. I don't understannd?
    Thank you very much!

    1) The image picker does not support multi-select. I think the best you could do is show the user the picker multiple times keeping track of all the images they pick.
    2) You can't get the image filename. It would be of no use anyway. When the user takes a picture with the camera, for example, internally the phone stores the image with some internal filename that wouldn't make sense to anyone outside of the phone. Most likely all images are internally stored as JPG but they could be PNG.
    3) Images on the phone will never be (I think) GIF or BMP or anything other than PNG and JPG.
    There are a lot of conversions going on. The images on the phone are stored as PNG or JPG. When you load them into a UIImage they are converted into an internal bitmap format. If you then use UIImageJPEGRepresentation (or the PNG version) then the internal data is converted to that format. The PNG and JPG formats should be smaller than the internal format due to compression.

  • How can I multi-select texts?

    Just as I can do in MS Word.
    I want to select separate words in a text object. It's giving me a headache...
    Thank you in advance.

    You can thouhg use the eyedropper to stylize text noncontiguosly.
    zoom in on text (so you can be more precise, as in step 4 you do not see hightling of text)
    eyedropper click to samepl text you want to apply
    hold down option
    drag over text to apply

  • 9.4.5 BUG.  Can't Multi-select Pages anymore!!!!

    Confirmed on all 4 Adobe Acrobat 9.4.5 users at my org since the update yesterday.
    Before, if you held the CTRL Key, you could select multiple pages in the Pages Pane to Delete/Extract/Ect.
    THIS NO LONGER WORKS! And we use that functionality A LOT.
    What is the best way to get this info to the powers that be?
    -Sam

    I am not going to spend one more red cent on Acrobat and reward Adobe for their lack of effective testing. As a long time Acrobat user and a former tester of software, it seems they do not do a good enough job regression testing their fixes to see if what they fix does not affect other parts of their product. I wonder how many other bugs are waiting for me if I upgrade to Acrobat X.
    I really wonder if Adobe knows that there are a few good alternatives to Acrobat out there. And I do not want to discuss which ones are best.
    Ken Friedman

  • ADF Table Multi Select Issue

    Hi,
    I have a read only table with multi select and a panel form based on the same VO. The from has editable component through which the user modifies the data.
    When the user selects a single row in the table -> the form shows the corresponding data.
    When the user selects multiple rows using cntrl key say ROW_1, ROW_2, ROW_3 the form displays data of ROW_3.
    However after this if i click on ROW_1(single row selection) , the form still shows the data of ROW_3. How to show the correct data in from
    My Jdev 11.1.1.4
    Thanks
    Ajay

    Well, your use case is somewhat problematic. It doesn't make sense to have an edit form together with a multi select table, as the user can't be sure which row data he sees in the edit form.
    This said, you need to know, that the af:table has two properties which should not used together: SelectionListener, selectecRowKey should not used with rowSelection="multiple".
    For multiple select table you should not populate these properties. (http://download.oracle.com/docs/cd/E15523_01/web.1111/b31974/web_tables_forms.htm#sthref2010)
    You can e.g. add a column to your table containing a link to allow edit of the row. Then you can use multi selection the normal way.
    Timo

  • The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

    The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

    The Control A key is not working. I cannot multi-select my songs. I'm not sure if it is the problem with iTunes 10.6.1.7 or my PC settings encounter issues. Also, i cannot find Album Artwork online using iTunes and i cannot select any view form but List.

  • I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library.  I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can.

    I just noticed that I can no longer select photos out of my finder that are located in my Aperture/Iphoto Library.  I used to be able to attach photos to my gmail out of the aperture library in the finder and for some reason, no longer can.
    I can't access these images except to go into the applications. 
    Also, I'd like to import my iphoto library into aperture, and move aperture library to an external drive.  I tried the import first, but there wasn't enough space.  Then I tried copying over the aperture library onto the external drive but it failed bc it said file was in use. 
    As it is, I only have 50gb left on my imac, and the aperture library is 150gb.  Also, I have over 10k images in both libraries combined and there are tons of duplicates that need to be sorted, and hopefully not messed up because I've organized most of them.
    So in short, I need to know how to do the following:
    -select photos in finder in aperture/iphoto libraries
    -move aperture library to live on external drive
    -import iphoto library into aperture library
    -eliminate dups but maintain organization
    -moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
    -live happily ever after
    Thanks in advance for any support you can offer!!

    If you're using apps like iPhoto or Aperture then they replace the Finder for managing your photos. The point is that you use the (many) options available via these apps for the things you want and need to do with the Photos.
    So, simply, you don't select the photos in the Finder. I'll append the supported ways to do this - which are faster and will yield the current version of your Photos - to the end of this post.
    -move aperture library to live on external drive
    Managed or Referenced Library? Managed -
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit Aperture
    2. Copy the Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching Aperture. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Referenced -  relocate your Masters first.
    These issues are covered in the Manual and on this forum hundreds of times.
    -import iphoto library into aperture library
    FIle -> Import -> iPhoto Library? Have you done this already? If so are you trying to move the Masters to Aperture from an  iPhoto Library? Or Consolidate them?
    -moving forward i need a better workflow so that I import images from camera, and can organize right away into albums rather than creating projects by default and then creating albums so essentially the photos are in 2 different places, even tho they are referenced
    You can't. Every photo is in a Project.  They’re the basic building blocks of the Library.
    You might want to spend a little time with the manual or the video tutorials. I'm not sure you've grasped the app  you've purchased.
    The following is written for iPhoto, but about 97% works for Aperture too.
    There are many, many ways to access your files in iPhoto/ APerture:   You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics. This is what you use to attach your shot to your GMail
    (Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
    You can access the Library from the New Message Window in Mail:
    There's a similar option in Outlook and many, many other apps.  If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto/ Aperture.
    If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
    If you want to access the files with iPhoto/ Aperture not running:
    For users of 10.6 and later:  You can download a free Services component from MacOSXAutomation  which will give you access to the Library from your Services Menu.
    Using the Services Preference Pane you can even create a keyboard shortcut for it.
    or use this free utility Karelia iMedia Browser

  • Can multi-select picklist be used in Expression Builder?

    Does CRMOD allow the use of multi-slect picklist in Expression Builder within workflow?

    Thanks Suddu your process worked. This can be done it is just a little more manual than being able to select the field from the drop down list.
    To do this go to Admin, Application Customization, choose your record type, then Field Setup. Click on Rename Fields, then Advanced and copy the multi-select picklist field. Paste it into expression builder and at the end of the name add _ITAG. You will also need to add the brackets as well. Doing this will allow you to use a mspl in expression builder.                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • Can I create  a multi-selection list using a dynamic list of values?

    I'm reading section 19.7.3 from the dev guide - it explains how to create a selectOneListbox using a dynamic list of values. Is it possible to create a multi-select listbox from a dynamic list of values?
    What I would like to do - I have a read-only view object with a hard-coded query - I would like to display the results of the query in a dropdown list box, or dropdown list box with boolean checkboxes, to allow the user to select multiple items from the list. How can I accomplish this?
    thanks

    Hi JavaX,
    I don't know of any JSF components (at least not any ADF Faces components) that lets you do multiple selection in a drop-down. There is an af:selectManyListbox, but it does not render as a drop-down.
    John

  • How can I validate a multi-select box to have at least 1 option

    How can I validate a multi-select box to have at least 1 option
    selected in struts?

    thanks i will try that other then that if I want to create single drop down list and pass multiple values associated to that drop list value how would i do that....

  • How to use multi select in a query report

    I defined a lov. This lov retuns name and a id. I want to use the result of this multi select in my query.
    I always get invalid number when I choose two items of the select. When I debug I see that the return value of the multi select is 1:2. How can I change the seperator : in , I tried the following but this does't work.
    if :P26_PRODUCTTYPE IS NOT NULL then
    l_sql := l_sql ||' and producttype in
    (REPLACE(:p26_producttype,'':'','','' ))';
    end if;

    as you're finding, multiple values selected from html db multi-select list items (and checkboxes) are stored as a single, colon-delimited string. i explained an easy way to handle this via pl/sql in...
    Multiple select list
    ...that post shows you how to throw the selected values into a pl/sql table and step through them as needed. it also showed how to use an instr to parse through the string if you want to go that route. you could use that same instr logic right in your sql query. so let's say your lov for your multi-select item (P1_MY_MULTISELECT, we'll call it) was defined as...
    select ename, empno from emp order by 1
    ...and your user selected KING, FORD, and JONES. :P1_MY_MULTISELECT would store those values as...
    7839:7902:7566
    ...you could then write a query to return the selected enames with something like...
    select ename, job
    from emp
    where insrt (':'||:P1_MY_MULTISELECT||':',':'||empno||':') != 0
    ...hope this helps,
    raj

  • Items are not visible in multi-select listbox in a static form

    Hi,
    I'm using adobe livecycle designer 8.0. I have a multi-select listbox, the items are hardcoded into the form. In runtime, some of the items are selected from the server side when the PDF is generated. If only one item is selected then there is no issue. When multiple items are selected, the list box is behaving as below.
    If the PDF is static,
    If the listbox is readonly, then all the selected items are visible (highlighted in red)
    If the listbix is editable, then it appears blank. If you select it using right click, then you can see all the items and the selected items. But if you click again somewhere outside the listbox, then the listbox goes blank. If you select it using left click, then the previous selections are gone and the items are visible with the item you just selected.
    If the PDF is dynamic, then the multi-select  is working fine.
    Aren't the multi-select listboxes supported in static PDFs?
    For your reference, I created 2 templates (static and dynamic) and populating the values using javascript in the docReady event. I'm using \n character as delimter to select the multiple items. Please find them at the below links.Notice the "List Box 1" in both forms. In static form, the values appear only after you right click the listbox.
    http://share1t.com/sd4huu
    http://share1t.com/hjbfr6
    Thanks
    Ram

    Hi All,
    In such cases, please try to check as below :
    1) Create Leave request work item from Employee and check the same under the UWL Tracking tab of employee.
    2) Log-in to swi5 transaction of the respective back end system and give "US" -> manager's UserID -> Choose Tasks to be completed from the drop down -> Remove any date if mentioned -> Execute.
    3) Here if you can see the Leave request created, but not on the portal, it reflects some portal issue like sync.
    4) If no leave request work item is seen here, then there is a problem in the employee manager mapping or the workflow setup.
    5) In such cases, you can try to check the Swi1 and check the log of that workflow to understand the current status of the Leave request.
    Revert if further help is needed with more info.
    Reward points if found useful.
    Regards,
    Shri vidya S

  • How Do I Filter a Report Using a Multi Select List Box and Specifying Date Between Begin Date and End Date

    Hope someone can help.  I have tried to find the best way to do this and can't seem to make sense of anything.  I'm using an Access 2013 Database and I have a report that is based on a query.  I've created a Report Criteria Form.  I
    need the user to be able to select multiple items in a list box and also to enter a Begin Date and End Date.  I then need my report to return only the records that meet all selected criteria.  It works fine with a ComboBox and 1 selection but can't
    get it to work with a List Box so they can select multiple items.  Any help is greatly appreciated while I still have hair left. 

    The query should return all records.
    Let's say you have the following controls on your report criteria form:
    txtStart: text box, formatted as a date.
    txtEnd: text box, formatted as a date.
    lbxMulti: multi-select list box.
    cmdOpenReport: command button used to open the report.
    The text boxes are used to filter the date/time field DateField, and the list box to filter the number field SomeField.
    The report to be opened is rptReport.
    The On Click event procedure for the command button could look like this:
    Private Sub cmdOpenReport_Click()
    Dim strWhere As String
    Dim strIn As String
    Dim varItm As Variant
    On Error GoTo ErrHandler
    If Not IsNull(Me.txtStart) Then
    strWhere = strWhere & " AND [DateField]>=#" & Format(Me.txtStart, "yyyy-mm-dd") & "#"
    End If
    If Not IsNull(Me.txtEnd) Then
    strWhere = strWhere & " AND [DateField]<=#" & Format(Me.txtEnd, "yyyy-mm-dd") & "#"
    End If
    For Each varItm In Me.lbxMulti.ItemsSelected
    strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
    Next varItm
    If strIn <> "" Then
    ' Remove initial comma
    strIn = Mid(strIn, 2)
    strWhere = strWhere & " AND [SomeField] In (" & strWhere & ")"
    End If
    If strWhere <> "" Then
    ' Remove initial " AND "
    strWhere = Mid(strWhere, 6)
    End If
    DoCmd.OpenReport ReportName:="rptMyReport", View:=acViewPreview, WhereCondition:=strWhere
    Exit Sub
    ErrHandler:
    If Err = 2501 Then
    ' Report cancelled - ignore
    Else
    MsgBox Err.Description, vbExclamation
    End If
    End Sub
    If SomeField is a text field instead of a number field, change the line
            strIn = strIn & "," & Me.lbxMulti.ItemData(varItm)
    to
            strIn = strIn & "," & Chr(34) & Me.lbxMulti.ItemData(varItm) & Chr(34)
    Regards, Hans Vogelaar (http://www.eileenslounge.com)

  • Multi Selection from a List Box to a Text Box

    So I want to be able to make Multi Selections within List box and export it to the Text box. Right now I have a Script running on the cal of the Text Box
    event.value = getField("LISTBOX").valueAsString;
    Which is able to do one selection but I cant find anybody that can grab two selecitons and put into a text box with commas for something. Is there a way to do this?
    -Zach

    Wow over my head a little. I understand what an array is with script but not how to write the script to handle it. I made this:
    event.value = getField("LISTBOX").value;
    But still no change in the behavior with multi selections. Example below if you want to check it out.
    https://dl.dropboxusercontent.com/u/2944617/formtext2.pdf

  • Resetting Selection from a Multi-Select Dashboard Prompt in OBIEE 11g

    Hi all,
    I have a dashboard prompt, containing 3 columns which all are set to allow multi selection and default value is all values.
    In 10g, after choosing some values in one of the prompt and clicking Go button, I can manually remove all my selection to reset it back to the default value (which is all values).
    In 11g, however, I am not able to find how to do it. The reset button doesn't reset back to the default value (which is all values). So what I have to do is to use the "Clear All Customization", which will clear all my selection for all the prompts.
    Any suggestion on how to do this? Thanks in advance!

    Hi Deepak, actually I don't need any script to do that in 10g.
    It's a built in feature in 10g. If you remember, for multiselect prompt in 10, we will click the "..." button to show the box for value selection. Then we can move values from left box to the right to include them, or vice versa to not include them. So by moving the values from right box to the left, I essentially revert to default value which mean all values will be shown.
    In 11g, this box is not shown anymore, instead we are checking the values one by one from a drop down list.
    Any suggestion? Thanks.

Maybe you are looking for