I can't ncrease the sound on my laptop, the button seems to be ether stuck or not connecting

have tried to ncrease the sound on my laptop, when I bought the laptop was able to inccrease and decrase the volume. however, this last week I have been unable to do so, the button seems either to be stuck or it is not connecctong to the component inside to increase volume, as watch tv and films on the laptop this nadequacy has become an issue, is there something I can do myself?

If both the Mac Pro and the G4 Power Mac are unable to access this particular website, the issue is most likely with the Actiontec, which is a combination modem & router, and not either Macs.
Sometimes just a simple power recycle of your networking hardware will resolve the problem.
I would recommend that you do the following as a minimum:
Power-down the Actiontec and computers.
Power-up the Actiontec; wait at least 10-15 minutes.
Power-up your computer(s).
Both Macs should now be able to access web sites on the Internet. I just tested it myself and had no issues connecting so it's definately not a configuration issue with your Macs.

Similar Messages

If you rent a movie through iTunes can you watch the movie on your iPad if you are not connected to internet or 3g

If you rent a movie through iTunes, can you watch the movie on your iPad if you not in an area that does not have wifi or 3G access? Such as on an airplane, etc...

Yes - as long as the movie has totally and fully downloaded onto the iPad.

How can I undo the "erase iphone" request while my iphone is not online yet?

My iphone 4 has been stolen days ago.
I posted "erase iphone" request through iclouds webpage by mistake.
Before "erase iphone", I'd like to try "play sound" and "lost mode" first.
How can I undo the "erase iphone" request while my iphone is not online yet? Because if the phone was online again, it will be erased immediately.

Hello RationalPuppet
If you go to Settings > Music and then toggle off Show All Music that will prevent from seeing your downloaded music. I have also provided other articles for hiding purchases and even deleting purchases from iTunes in the Cloud.
Download purchased music to your iPhone
http://support.apple.com/kb/index?page=tidetail&product=iphone&locale=en_US&tag= Music
iTunes Store: Hiding and unhiding purchases
http://support.apple.com/kb/HT4919
iTunes Store: How to delete songs from iCloud
http://support.apple.com/kb/HT4915
Thanks for using Apple Support Communities.
Regards,
-Norm G.

YOU CAN'T OPEN THE APPLICATION VIRTUAL DJ LE BECAUSE IT IS NOT SUPPORTED ON THIS ARCHITECTURE .. What can I do to Fix this??

I have a Mac PowerPC G5 and i just installed the Version 10.5.4 to be able to install Virtual DjLE , and after I installed it, i try to open it and there was an error msg saying : " you can't open the application virtual dj le because it is not supported on this architecture"
What can I do to resolve this? ... Can someone help me with this?? ..
Thank you for your help!

Hi, we're out of luck...
MAC SYSTEM REQUIREMENTS
MINIMUM system requirements:
Intel® processor
Mac OS X v10.5.x
1024x768 resolution
CoreAudio compatible soundcard
1024MB RAM
50MB free on the hard drive
RECOMENDED system requirements:
Intel® processor
Mac OS X v10.6.x
1440x900 resolution
Multi-channel CoreAudio compatible soundcard
2048MB (2Gb) RAM
200MB free on the hard drive
Additional requirements for Video mixing:
ATI™ or NVIDIA® video chipset w/256MB of Dedicated DDR3 RAM
Video must support dual-screen output
Supported Operating System and Processor Platforms:
MINIMUM: Mac OS X v10.5 Leapord on Intel processor platform
RECOMMENDED: Mac OS X v10.6.x Snow Leapord on Intel processor platform
Apple® Mac OS X 10.4.x Tiger or older are not supported
Motorola® (PowerBook® G4) processor platform or older are not supported
http://www.virtualdj.com/products/virtualdj/index.html
Might see if the still have version 6.x here...
http://www.virtualdj.com/download/updates.html

You can't open the application "Adobe InDesign CS4" because it is not supported on this architecture"

A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8. After what appears to be a successful installati
on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
architecture" comes up". Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
ation" when launching afterwards. The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
Following this I am told to run the CS4 Cleanup Utility. I restart the computer each and every time after running each of the utili
ties. Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
r. When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
n CS4" because it is not supported on this architecture" comes up". Followed KB404711 article and no success. What else can be don
e to fix this issue?
This morning contacted Adobe Support regarding this response:
After having a detailed reserach on your issue i acme to the conclusion
that the problem you are having is not related to Adobe software but its
in fact related to your MAC version ( OSX-5.8). While reseraching your
issue i came across
to many forums where a lot of postings were about the similar error but
with different products the only comon thing was all the Errors were
with Mac machine , also when you check the system requirements for
Adobe Indesign Cs4
by going to the following link
http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE you
will find the Mac OS version supported are from Mac OS X
v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
to advise to you to either contact your system manufacturer or upgrade
to Snow Leopard ( mac os x 10.6)
I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response. In the meantime I decided to see what the Support Forums can do for me. Until then I am down. Thanks for the help.

In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
I've un-installed and installed again - still the same.
Even downloaded the dmg again and done thwe whole thing over again.

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

2 different iphones have the same Apple ID, how can I change the apple ID on one of them but not delete the other iphone's data and media?

You don't have to do anything with the first iPod that you don't use anymore. If you are planning on keeping it, put in a drawer in your house and forget about it.
You don't need a second account to use with the new iPod. I use one Appl e ID and iTunes library for two iPods, and two iPad. I have different content on all four devices. You can select exactly what you want to sync to each device and it can be different content on all devices.

How can I use the button in one panel to control the other panel's appearing and disappearing?

How can I use the button in one panel to control the other panel's
appearing and disappearing? What I want is when I push the button on
one button . another panel appears to display something and when I
push it again, that the second panel disappears.

> How can I use the button in one panel to control the other panel's
> appearing and disappearing? What I want is when I push the button on
> one button . another panel appears to display something and when I
> push it again, that the second panel disappears.
>
You want to use a combination of three features, a button on the panel,
code to notice value changes using either polling in a state machine of
some sort or an event structure, and a VI Server property node to set
the Visible property of the VI being opened and closed.
The button exists on the controlling panel. The code to notice value
changes is probably on the controlling panel's diagram, and this diagram
sets the Visible property node of a VI class property node to FALSE or
TRUE to show or
hide the panel. To get the VI reference to wire to the
property node, you probably want to use the Open VI Reference node with
the VI name.
Greg McKaskle

You can't open the application "..." because it is not supported on this type of Mac.

I migrated all files from OS 10.7 to OS 10.8 through time machine. However, I always see error packages like the following if I want to run some .pkg files.
You can't open the application "..." because it is not supported on this type of Mac.
But when I switch to a different account, then the .pkg files can be run. Therefore, I think that there might be something wrong with my account configuration files. But I don't know which one. Does anybody which one might cause the problem and how to fix it? Thanks!

softwater wrote:
And both are on the same startup disk, right? Because, to be honest, it's hard to figure out how you could have this problem with both accounts on the same startup disk, so I just want to check that before we get too involved.
Assuming that's the case, the first thing I'd do is remove all those except Dropbox from the list, then restart the mac and test for the problem. If that doesn't solve it, run this free analytical tool and post the results back here so we can see if anything stands out:
http://www.etresoft.com/etrecheck
I have removed these login items. But I can not restart my mac now and I will have to restart it later.
Here is the output of etrecheck. Would you please take a look if there is anything wrong?
Hardware Information:
    MacBook Pro - model: MacBookPro9,1
    1 2.6 GHz Intel Core i7 CPU: 4 cores
    16 GB RAM
Startup Items:
    CUDA - Path: /System/Library/StartupItems/CUDA
System Software:
    OS X 10.8.2 (12C3006) - Uptime: 3 days 2:52
Disk Information:
    APPLE HDD HTS727575A9E362 disk0 : (750.16 GB)
        disk0s1 (disk0s1) <not mounted>: 209.7 MB
        Macintosh HD (disk0s2) /: 749.3 GB (311.8 GB free)
        Recovery HD (disk0s3) <not mounted>: 650 MB
    MATSHITADVD-R   UJ-8A8
USB Information:
    Apple Inc. FaceTime HD Camera (Built-in)
    Apple, Inc. Keyboard Hub
        Logitech USB-PS/2 Optical Mouse
        Apple, Inc Apple Keyboard
    Apple Inc. BRCM20702 Hub
        Apple Inc. Bluetooth USB Host Controller
    Apple Inc. Apple Internal Keyboard / Trackpad
    Apple Computer, Inc. IR Receiver
FireWire Information:
Kernel Extensions:
    com.eltima.ElmediaPlayer.kext    Version: 1.0
    com.bresink.driver.BRESINKx86Monitoring    Version: 8.0
    com.nvidia.CUDA    Version: 1.1.0
Problem System Launch Daemons:
           [failed]    com.apple.emond.aslmanager.plist
           [failed]    com.apple.xprotectupdater.plist
Problem System Launch Agents:
           [failed]    com.apple.afpstat.plist
Launch Daemons:
           [loaded]    com.adobe.fpsaud.plist
           [loaded]    com.cisco.anyconnect.vpnagentd.plist
           [loaded]    com.eltima.ElmediaPlayer.daemon.plist
           [loaded]    com.google.keystone.daemon.plist
           [loaded]    com.timesoftware.timemachineeditor.backupd-auto.plist
           [loaded]    io.redis.server.plist
           [loaded]    org.macosforge.xquartz.privileged_startx.plist
Launch Agents:
           [loaded]    com.adobe.CS4ServiceManager.plist
           [loaded]    com.cisco.anyconnect.gui.plist
           [loaded]    com.google.keystone.agent.plist
           [loaded]    com.Logitech.Control Center.Daemon.plist
           [loaded]    com.nvidia.CUDASoftwareUpdate.plist
           [loaded]    org.macosforge.xquartz.startx.plist
User Launch Agents:
           [loaded]    com.adobe.ARM.930da3ce175de4e82bd3cdf1dd8571f74bd3b6a7236bc94bfc00f6e9.plist
           [loaded]    com.akamai.single-user-client.plist
           [failed]    [email protected]
           [loaded]    org.apache.couchdb.plist
User Login Items:
    Citations
    Dropbox
    Xmarks for Safari
    VNC Viewer
3rd Party Preference Panes:
    Akamai NetSession Preferences
    CUDA Preferences
    DivX
    Flash Player
    FunctionFlip
    Logitech Control Center
    NuFile
    SwitchResX
    TeXDistPrefPane
    Xmarks for Safari
Internet Plug-ins:
    AdobePDFViewer.plugin
    DivXBrowserPlugin.plugin
    Flash Player.plugin
    FlashPlayer-10.6.plugin
    Google Earth Web Plug-in.plugin
    googletalkbrowserplugin.plugin
    iPhotoPhotocast.plugin
    JavaAppletPlugin.plugin
    NPDjVu.plugin
    PrintDialogExt.plugin
    npgtpo3dautoplugin.plugin
    OfficeLiveBrowserPlugin.plugin
    QuickTime Plugin.plugin
    RealPlayer Plugin.plugin
    Silverlight.plugin
User Internet Plug-ins:
Bad Fonts:
    None
Top Processes:
    11.1 %    WindowServer
    1.4   %    EtreCheck
    0.3   %    vncviewer
    0.1   %    beam.smp
    0.1   %    ps
    0.1   %    JavaApplicationStub
    0.0   %    Cisco
    0.0   %    CoreServicesUIAgent
    0.0   %    Dictionary
    0.0   %    AdobeAcrobat

You can't open the application "System Preferences.app" because it is not supported on this type of Mac

All of the sudden my System Preferences in Mavericks has stopped working and I get the error message:
You can't open the application "System Preferences.app" because it is not supported on this type of Mac.
It was working fine before this, and I have run Permissions Repair, restarted to another partition and run Diskwarrior and TechTool Pro, but none of those has helped. Anyone have any ideas why this happened, and what I can do to fix it?

See this entire thread
https://discussions.apple.com/message/4241006#4241006

I can't access the internet on our Mac desktop . I am connected to wifi and other computers in our house can access the internet.

The Mac desktop computer in our house is connected to wifi but you can't browse the internet. Other computers in our house are connected to wifi and are browsing without any issues.

Go step by step and test.
1.Power Cycle
   Power off the router. Unplug it from the wall. Wait a while.
   Plug it back to the wall. Power the router on. Wait until all the lights are lit properly.
   It will take a while.
Restart the computer.
Start up in Safe Mode.
   http://support.apple.com/kb/PH11212?viewlocale=en_US
2. Turn off Extensions, if any.
     Safari > Preferences > Extensions
3. Turn off proxies, if selected.
     System Preference > Network > Advanced > Proxies Tab
     Under "Select Protocol", uncheck any box if selected.
     Click "OK" then "Apply"
4. Uninstall anti-virus software, if any.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

I can only print the current page of downloaded pdf's. Not able to print "all". I'm using a Macbook air.

it says "the document could not be printed". "There were no ages selected to print".
I selected "all". I always tried selecting pages "1-3".
The only choice that works is current page. Very strange.

How can I become the Administrator of my deceased Mother's computer, not knowing her passwords?

How can I become the Administrator of my deceased Mother's computer, not knowing her passwords?

Reset the password
Forgot Mac Password? How to Reset Your Mac Password (with or without CD)
Change the Admin Password with Mac OS X Single User Mode
Reset mac mini admin password: Apple Support Communities

How can I find the buttons that there are in Searchaccount view IUICMD ??

Hello experts,
Could you tell my where can I find the buttons ("Search", "Reset", "Create Account") that appear in the view "SearchAccount", please could help me??
Thanks in advance.

Hi,
Go to the Search Account View IMPL class-CL_IUICMD_SEARCHACCOUNT_IMPL.There you will find the method DO_INIT_CONTEXT.Inside that method, coding is there to place buttons on the view.
The buttons can be placed anywhere-DO_Prepare_output,Do_init_context or IF_BSP_WD_TOOLBAR_CALLBACK~GET_BUTTONS method in the IMPL class.So you can either try looking into these methods or you can look into the html coding.There you will find a variable called gt_buttons(not always, but mostly it will be there).You can use the where-used-list of gt_buttons to find where it is getting filled.
Hope this helps!
Regards,
Rohit

TS1363 how can i change from disk modae to normal mode as none of the buttons seems to be working ?

how can i change from disk modae to normal mode as none of the buttons seems to be working ?

Have you tried a hard reset of the iPod yet?
How to reset iPod
This should take you out of disk mode and allow the iPod to boot up as it normally does.
B-rock

Where can i find the chassis file for import in MAX for drawing connection diagram before purchasing

where can i find the chassis file for import in MAX for drawing connection diagram before purchasing
chassis: NI PXIe-1078
thx

This board is for an obsolete product called Measure - an add-on for Excel. Please repost with details on exactly what you mean by 'chassis file'.

I can't ncrease the sound on my laptop, the button seems to be ether stuck or not connecting

Similar Messages

Maybe you are looking for