I can't open any folders or programmes

I'm posting this question through bootcamp.
Everytime when I delete the files, my mac asked me to type password. So I searched to fix the problem and it told me to go to terminal and type:
sudo chown -R username:staff /Users/dominica
sudo chmod -R 600 /Users/dominica
After when I typed this, my mac got froze. So I had to restart my mac, and it completely went basic. All my programmes and documents were gone, also I couldn't open finders, and did not show the bar on top.
Then I restarted mac with cmmd+R, and I verifyed and recovered the disk to fix the problem.
When I restarted my mac, all my programmes were back. But it did not allow me to open of any progammes or folders saying I don't have any permisson to open these files.
So how can I fix this? I didn't back up any of my work, and I really don't want to reinstall the OS. Please help me.

#5 and #6 here
..Step by Step to fix your Mac
if that don't work then
.Create a data recovery/undelete external boot drive
then
Erase, formatting, OS X installs on Mac's

Similar Messages

Segmentation Fault - Can't open any folders

I have a new MB Air (late 2010) running OSX 10.6.6. Everything has been great until yesterday.
As of yesterday I can not open any folders/Finder. I can run applications though. When I try to open folders on my desktop (Mac HD), Trash, Finder, etc. all I get is the screen flashes and then nothing happens.
I can't think of anything that I've downloaded/installed lately that would be an issue. Last thing I downloaded was Dropbox and Echofon Lite from Mac Store but I've used them both for the last 2 weeks and didn't have any problems.
I've investigated a little and found the following logs:
Mar 19 13:49:52 jason-newmans-computer-2 com.apple.launchd.peruser.501[117] (com.apple.Finder[853]): Job appears to have crashed: Segmentation fault
Mar 19 13:49:52 jason-newmans-computer-2 ReportCrash[868]: Saved crash report for Finder[853] version 10.6.7 (10.6.7) to /Users/Jason/Library/Logs/DiagnosticReports/Finder2011-03-19-134952jason-newmans-computer-2.crash
Any suggestions? Thx.

+I had to log in via "Root" user in order to find that file and trash it because I couldn't open Finder via those accounts.+
I missed that. You could have done it without logging in as root, but that's OK.
+What made this happen? Anything I did?+
No way of knowing. Application preference files get corrupted sometimes, and then the application will crash or behave unexpectedly. That goes for any application, not just the Finder.

Have used cloud with CS5.5. Not longer have cloud can not open any of my creative CS5.5 folders. Why? and how do I fix it?

As a student enrolled and used the Cloud. already had CS5.5 Creative suite installed on computer. Now that I'm no longer a student and No Longer have Cloud I can not open any of my folders with work in them. It wants me to up dated my subscription. I cant afford it right now.
I want to use the programs I have already paid for. . Creative Suite CS 5.5.
Why can't I open those folders/work and how do I fix it.

if you don't have cs5.5 installed, you can download and install it.
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

Cannot open any folders within thunderbird or send unsent messages after computer (ubuntu) closed suddenly whilst using programme

I use ubuntu. The computer ran out of battery power and closed whilst I was using thunderbird. On restarting thunderbird later, I found that I could not open any folders or send any unsent messages. When I close the programme, I cannot restart it because it says thunderbird is already open, but if I use killall -9 thunderbird I am told there are no thunderbird processes running. I've checked my profile and there is no lock file or parentlock file. Someone suggest deleting the global messages database, but this hasn't helped at all.
If I am slow responding to any questions, please be patient, tonight is my last night with a decentinternet connection - before returning to my rural African home, where we get download speeds of 15kb/s on a good day.
Thanks,
Karen

Do you run some sort of anti-virus software on the Ubuntu computer?
Do you have a backup of your profile folder? If not, now is a good time to create one.
https://support.mozilla.org/en-US/kb/profiles-tb#w_backing-up-a-profile
There might be some sort of corruption in connection with your Inbox folder.
Try to rebuild the index file within Thunderbird:
Right click on Inbox in Thunderbird, select Properties, and then press the Rebuild Index button.

Getting Error message couldn't open XPCOM and can't open ANY pages

After load of updates were completed, I keep getting this Error 'COULDN'T OPEN XCOM' I can't open any programs or emails, Firefox won't open or IE. Have tried System Restore a number of times without any luck, even that doesn't complete successfully, starting to tear my hair out now.

This is usually a problem with a failed update that caused a corrupted installation that still has older files.
Do a clean reinstall and delete the Firefox program before (re)installing a fresh copy of the current Firefox release.
*Download the full Firefox installer and save the file to the desktop<br>http://www.mozilla.org/en-US/firefox/all.html
If possible uninstall your current Firefox version to cleanup the Windows registry and settings in security software.
*Do NOT remove "personal data" when you uninstall your current Firefox version, because this will remove all profile folders and you lose personal data like bookmarks and passwords including data in profiles created by other Firefox versions.
Remove the Firefox program before installing that newly downloaded copy of the Firefox installer.
*(32 bit Windows) "C:\Program Files\Mozilla Firefox\"
*(64 bit Windows) "C:\Program Files (x86)\Mozilla Firefox\"
*It is important to delete the Firefox program to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
*http://kb.mozillazine.org/Uninstalling_Firefox
Your bookmarks and other personal data are stored in the Firefox profile folder and won't be affected by an uninstall and (re)install, but make sure that "remove personal data" is NOT selected when you uninstall Firefox.
*http://kb.mozillazine.org/Profile_folder_-_Firefox
*http://kb.mozillazine.org/Profile_backup
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

I can't open the folders within my bookmarks.

''locking this thread as duplicate, please continue at [https://support.mozilla.org/en-US/questions/1043044 /questions/1043044]''
I am unable to open any folders within my bookmarks. When I click on the Bookmarks and I scroll over a folder to open it, nothing happens. The number of URLs within any given folder range from 3-30.

Hi s77f,
Please take not of how to recover your profile after making any changes while troubleshooting this issue.
*[[Back up and restore information in Firefox profiles]]
If you import the bookmarks to a new profile, does this happen as well?
[[Export Firefox bookmarks to an HTML file to back up or transfer bookmarks]] and [[Use the Profile Manager to create and remove Firefox profiles]]
Or, to make sure it is not hardware acceleration, some preferences or addons:
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

CAN'T open any applications after mac os update 10.4.11

CAN'T open any applications after mac os update 10.4.11 help

General advice on updating:
It is worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first to an external hard disk. Ideally you should always have a bootable clone of your system that enables you to revert to the previous pre-update state.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/kb/DL170
And for Intel Macs here: http://support.apple.com/kb/DL172
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications and turn off energy saving and screensaver.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
[b]If you are updating Safari (or just have):[/b]
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very [i]first[/i] thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was [i]not[/i] a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
[b][i]Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on.[/b][/i] Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
/Library/InputManagers
~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

I can't open some folders anymore

Hi everyone
Since some couple of months, i can't open some folders on my macbook air and pro anymore. when I try to open some folders, than every icon disappears, and I am at the some place I was before. The folders exist, because when I try to open some files from the search bar, it works, but I can search the files into the folder!
Did anyone have a similar problem?
tx

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
For this step, the title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
In the top right corner of the Console window, there's a search box labeled Filter. Initially the words "String Matching" are shown in that box. Enter the name of the crashed application or process (Finder). For example, if iTunes crashed, you would enter "iTunes" (without the quotes.)
Each message in the log begins with the date and time when it was entered. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
☞ The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
☞ Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, select
          DIAGNOSTIC AND USAGE INFORMATION ▹ User Diagnostic Reports
(not Diagnostic and Usage Messages) from the log list on the left. There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points down. You'll see a list of crash reports. The name of each report starts with the name of the process, and ends with ".crash". Select the most recent report related to the process in question. The contents of the report will appear on the right. Use copy and paste to post the entire contents—the text, not a screenshot.
I know the report is long, maybe several hundred lines. Please post all of it anyway.
If you don't see any reports listed, but you know there was a crash, you may have chosen Diagnostic and Usage Messages from the log list. Choose DIAGNOSTIC AND USAGE INFORMATION instead.
In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.)
Please don’t post other kinds of diagnostic report—they're very long and rarely helpful.

Security Update 2007-004: can't open any MS Office programs & files.

I installed update this morning. Since then, I can't open any MS Office files and even programs. When I clicks the prograqms, it is jumping with icon but the program is not started (still Finder window).
Do you have any similar experience and know how to fix this?
Is this MS Office problem or OX security Update problem, or two jsut crashed?
I realy want to fix this because I usuaally work with Word/Exel/Power Point fimes. I appreciate your effort to read and thanks in advance.

Have just found this discussion group and now feel less incompetent. Have been unable to open any Office 2004 for Mac programmes for just over a week, and now cannot open the only other non Mac programme I have installed, which was working fine before (the Inland Revenue payroll software programme). Cannot get at half my archived e-mails which were in Entourage, although I also use .mac for my work e-mails which is fine. Have downloaded a demo spreadsheet programme to tide me over, and moved to using ilife which is good. But all the same - what is happening, and how can this be fixed? And if its happening to lots of us, surely either apple or Microsoft should give us a fix??
by the way, I am a new mac user, since May, and an enthusiastic convert until now!
any ideas??
imac Mac OS X (10.4.10)

Can access my Conceptronic NAS ( CH3HNAS ) but can't open any folder.

I have installed OS X 10.7 (Lion) and I noticed a LOT of people started having problems with their NAS. Basically most people can't mount/access the NAS. My problem is different since I CAN access it but I am not able to open any folders on my Conceptronic model CH3HNAS. I am trying to login using 2 different accounts (the default 'admin' and a personal one) both with admin privileges but I can only see the first level of folders, I can't open any of them. Lion says I don't have permission to see the contents.
I have emailed Conceptronic, I'll post any replies here.
In the meanwhile anyone knows how can I restore access to the folders? Any command line tricks?
Cheers

OK I found a free and easy solution.
Since a lot of people report they are able to access their NAS using apps other than the Finder itself, I decided to look for a free Lion-compatible File Manager to use instead of Finder.
I have found muCommander ( http://www.mucommander.com/ ) and indeed it works fine. All I did was click on the button highlighted bellow, go to "bonjour services" and select my NAS. It prompted me for my username and password and voilá, it works fine.
I keep Finder for everyday use and just load muCommander when I want to access the NAS. At least now I don't have to start my WinXP VM anymore just to access it.
Hope it helps you all.

Running 10.8.3 on an Intel iMac 27'. The Finder keeps grabbing over 100% of the CPU which seems to stop me from opening any folders. Only quitting the Finder from Activity monitor resets it to normal. Any ideas?

My Finder keeps grabbing over 100% of the CPU which seems to stop me from opening any folders.
Only quitting the Finder from Activity monitor resets it to normal.
Any ideas?

Nope, I don't have a "/Users/charon/Library/Mobile Documents" directory, let alone anything underneath it. Is that like an iCloud thing or something? I tend to avoid the Apple-supplied services when I can (I don't use iTunes either unless I can help it).
As an update, as of about two days later this problem seems to have solved itself. Possibly sleeping and waking did something to it (though that seems unlikely given how many times I rebooted), or else there was just some long-*** kernel process that finally worked itself out. But my system CPU is back down to normal and the cursor freezes are gone.
??? it is a mystery! ???

Can't Open any files in photoshop CS3

I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now

reset the preferences per the faq?
http://www.adobeforums.com/webx/.ef4a07f/1

Can not open any open any web pages. Receive the following error message (Error code: sec_error_library_failure)

I can not open any websites using Mozilla browser. I have attached a screen shot of the error message that I receive. You will also find it below: .
Secure Connection Failed
An error occurred during a connection to www.google.com. security library failure. (Error code: sec_error_library_failure)
The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
Please contact the website owners to inform them of this problem.
This error appears on all pages that I try to browse to. All other browsers work fine on my computer.

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that temporarily turns off hardware acceleration, resets some settings, and disables add-ons (extensions and themes).
'''If Firefox is open,''' you can restart in Firefox Safe Mode from the Help menu:
* Click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
'''If Firefox is not running,''' you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".
;[[Image:SafeMode-Fx35]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, theme, or hardware acceleration. Please follow the steps in the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Can not open any web page in Safari

can not open any web page in Safari on the IPad. All other wireless features work fine.

If this does not work then try a reset ,
Reset your iPad by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPad will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back.

How do I get rid of the Microsoft Setup Assistant loop? I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word, and stuck in a loop?

I migrated my software/documents from another laptop so don't have the disk to reinstall. Please help! Can't open any Microsoft Office software, like Word (for 2008), and stuck in a loop?
Whenever I select Word Microsoft Setup Assistant appears, asks for feedback, then after selecting okay (both on saying yes or no to feedback) goes on to a registration page. When I click on this it says I've already registered so I just click okay, and then move on to a update page. After this, if I click on Word, the process repeats itself.
As I said, I don't have the disk to reinstall, and can't find the Office Settings to delete as many pages have suggested I should try. Safe Boot restarting also hasn't worked... Really stuck and need Word very soon for work.
If you can help, that would be great, and feel free to ask any questions about the situation as I'm not an expert here.
Cheers,
Jack

First, export your contact from iCloud.com and save them on your computer in a safe spot some where (like you desktop). Use this to help you do this: http://support.apple.com/kb/PH3606
Next, on both of your devices, go to Settings > iCloud and turn on contacts and select Merge. Then turn off contacts and select 'Delete form my [device]' when prompted.
Now go back to iCloud.com and select a contact (yes they will all be messed up again) and select Command+A on a Mac or Control+A on a PC to select all of the contacts. Tap the delete key on your keyboard (or right click /control click a contact and select delete).
You iPhone, iPad and iCloud.com should not be empty for contacts.
Go back to Settings > iCloud on both devices and turn on contacts again (you should not see merge this time).
Next, go back to iCloud.com and import your contacts (those exported .vcards). You can either drag and drop them into the empty contacts list in your web browser, or you can use the gear icon to import.
You cleaned up contacts should import correctly into iCloud.com and sync to both of your devices.
Good luck.

I can't open any folders or programmes

Similar Messages

Maybe you are looking for