I can't open any of my photoshop files, but Photoshop itself opens?
I recently dowloaded photoshop CC and a week or two later now I can't open any of my files? I can't create new ones either?
Without knowing anything about your system or your files nobody can say anything.
Mylenium
Similar Messages
-
Having corrected my corrupt catalog (PSE 11) I now have thousands of duplicate images. Is there any way of of removing the extra copies? I've had suggestions that apply to Windows, and iPhoto but can't find any advice for Photoshop Elements on Mac Maverick
You used the data. Verizon can not see what it was sued for. However your phone can see whats apps used the data. go to settings-data usage- there will be a place that says data usage cycle. line the dates up with your cycle. then there will be a bar graph below that extend bother white bars one all the way to the left and one all the way to the right. after those are extended below that will be a list of apps, there should be one that used over 2 gb and that will show you what app used that data in her purse
-
Hi,
I have recently updated my iMac from OS x mountain lion to OS X Mavericks.
After that I can't upload any video and some files to my personal email account.
I have tried to send a small video clip to the sender as attachment. i have done this before
with the same video same and same email account. This problem found just after installed the
OS X Movericks. Can anyone please help me to sort this problem.
Thanks.
RomanPlease follow these directions to delete the Mail "sandbox" folders. In OS X 10.9 there are two sandboxes, while in earlier versions there is only one.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Containers/com.apple.mail
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder named "com.apple.mail" selected. If it does, move the selected folder — not just its contents — to the Desktop. Leave the Finder window open for now.
Log out and log back in. Launch Mail and test. If the problem is resolved, you may have to recreate some of your Mail settings. You can then delete the folder you moved and close the Finder window. If you still have the problem, quit Mail again and put the folder back where it was, overwriting the one that may have been created in its place. Repeat with this line:
~/Library/Containers/com.apple.MailServiceAgent
Caution: If you change any of the contents of the sandbox, but leave the folder itself in place, Mail may crash or not launch at all. Deleting the whole sandbox will cause it to be rebuilt automatically.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return. -
ITunes 10.5 can't find any of my original files, even though they show in my library
I was hoping you could help me with iTunes 10.5. This update has been a pain. When I first installed it, my entire library was gone. Luckily, I saved the "iTunes Library" file before updating and copied it in place and my library appeared. But now the problem I'm having is that the iTunes can't find any of the "original" files, even though my iTunes Media file location has not changed (it's on an external network drive". When I click on the "Do you want to find the original file" I can find it in the appropriate folder. I checked the "Preferences" and under "Advanced" I re-mapped it to the appropriate location and already had the 2 boxes for iTunes organizing files checked. Then went to "File" and "Organize Library" and clicked the first check box and then got the "Copying Files" bar. When this was completed, I thought it would be able to find the original files. But I'm still getting the same error message about not being able to find the "original" files. Do you have any suggestions?
I was hoping you could help me with iTunes 10.5. This update has been a pain. When I first installed it, my entire library was gone. Luckily, I saved the "iTunes Library" file before updating and copied it in place and my library appeared. But now the problem I'm having is that the iTunes can't find any of the "original" files, even though my iTunes Media file location has not changed (it's on an external network drive". When I click on the "Do you want to find the original file" I can find it in the appropriate folder. I checked the "Preferences" and under "Advanced" I re-mapped it to the appropriate location and already had the 2 boxes for iTunes organizing files checked. Then went to "File" and "Organize Library" and clicked the first check box and then got the "Copying Files" bar. When this was completed, I thought it would be able to find the original files. But I'm still getting the same error message about not being able to find the "original" files. Do you have any suggestions?
-
we have a mac laptop and dont have any problems with pdf files but our imac will not open them. any suggestions?
Back up all data.
In the Finder, select Go ▹ Go to Folder from the menu bar, or press the key combination shift-command-G. Copy the line of text below into the box that opens, and press return:
/Library/Internet Plug-ins
From the folder that opens, remove any items that have the letters “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari, and test.
If you still have the issue, repeat with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari again. -
Just got my Mac air and i would like to make a file to store some web addresses for my new business with rodan and fields and I can't do it. Made the file but i cant copy and paste the web addresses in the file to save them. Please help and thank you.
Yes - well you have to make the file in a word processing Application.
You could use TextEdit (it's free) Pages (words only), or Numbers (data base) (they are part of iWorks - and may or may not be free (included) on your machine. You could use MS Office (it is not free) You could use any Open source word processor that plays well with Office (NeoOffice, StarOffice) they are free.
That's how you create content and copy/paste URLS. Then you save the file to the desktop. If you are going to make more than one file... you make a folder on the desktop and save, or drag the file(s) into it.
You attach it to your e-mail client which will compress it and e-mail it. An excellent reference is to use Help, from the menu bar, also from inside any application. From your library or book store the OS X for Dummies has a lot of useful information (you don't read it cover to cover but look up chapters about what you'd like to do)
You can also make appointments at your local Apple store for individualized help (if a store is nearby) -
I just purchased two songs to put on my child's Leappad 2 MP3 player and I can see the songs under my music files but cannot save them because they were not downloaded as a MP3 file What can I do?
iTunes: How to convert a song to a different file format
-
I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.
Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra -
I cannot get my time machine to work properly.
When I open the program I see the back-up dates on the right and click the date I would like to access. Nothing happens.
Next, I try to flip through the dated files but can't get past the first one.
The arrows do not highlight and therefore I cannot scroll to the date I need to restore an item.
What am I doing wrong?
Do I need to reinstall the software?
Any suggestions are welcomed
Thank you
Lonnie SchwartzIt sounds like you're starting from a Finder window showing something that wasn't backed-up on any of those backups.
Try either selecting your Computer or internal HD in the sidebar before going into Time Machine, or pressing Shift+Cmd+C after getting there.
You might want to take a look at Time Machine - Frequently Asked Question #15A, especially the pink box there.
If that doesn't help, post back with a bit of detail; are you still on Lion (10.7.x), what sort of Mac do you have, where are your backups (external HD, Time Capsule, Network Drive, etc.)? It might help to post a screenshot, too. -
I can't access any of my InDesign files
Hi there,
This morning I turned on my work computer only to discover I couldn't access any of my Indesign, photoshop or illustrator files, despite the fact that some of the files were saved on both the computer and an external hard drive. There's now 100's of files I now can't access and I'm starting to freak out as my IT dept said they didn't know why.
The files would appear as white thumbnails and when I clicked on them the following message would appear:
Adobe Indesign may not support the file format, a plug-in that supports the file format may be missing, or the file may be open in another application.
I'd been using the same version of Indesign all along (CS4) so it's not as if I've recently updated and now can't open the files. I also tried opening the files up on another computer but no luck. This just seemed to happen overnight and no one has any answers. If anyone has experienced anything similar with so many files, I'd really appreciate your advice and I'd also like to understand the cause of the problem so something like this doesn't happen again.
Thank you in advance.
ClareFirst, I suspect there's a pretty good chance the files are OK and that the damage, whatever it is, is at the program level, and was done to your whole network. Do you have another system not connected to your network, at home perhaps, where you could try opening some of these files?
I hesitate to ask the obvious (as I say, I'm hardly in a position to second guess these guys) but if these are Windows systems, have they tried a system restore to a few days ago, or a restore from a backup image for either a Windows or a Mac system?
What about uninstalling your Adobe programs, running the cleaner tool, and reinstalling? See CS Cleaner Tool for installation problems | CCM, CS6, CS5.5, CS5, CS4, CS3 -
Pls I have encountering a problem with my phone I can not access any information on my file in
Please I can not open my file and also I could not download and update my whatsapp too it was just writting 907 invalid LOD
TheArtificialNerd wrote:
I can say 100% that the AppleCare phone number only redirects to other AppleCare groups.
ALL of them Apple corporate or Apple Authorized partners. -
HELP!
I couldn't download any app into my iPAD. Puzzled by this strange condition, I tried downloading the same chosen app into my iPhone. It worked!
I use the same Apple ID for both my iPAD and iPhone. So why is it not working for my iPad? Previously, both devices were working fine!
I hope that somebody can help me solve this problem.Do the apps show as installed on the Purchased tab in the App Store app ? If they show as installed, then have you got any restrictions set on Settings > General > Restrictions (e.g. Allowed Content > Apps) that might be hiding them ?
You could try closing the App Store app completely and then seeing if it downloads after you re-open it : from the home screen (i.e.not with the App Store app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the App Store app to close it, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
You could also try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
And try logging out, and then back in, with your iTunes account : Settings > Store -
Can't install any .PKG or .MPKG files with Mountain Lion.
Some weeks ago I found out, that I can't install anymore any programmes that are packed in .PKG or .MPKG files.
Whenever I double click one of theese files, or when I try the "open with" option, I get a system response from TextEdit.App . . .
I tried already some of the advices mentioned in the community forum, but nothing worked so far.
Latest thing I tried was to re-associate these two file types with the Installer - but I couldn't find it anywhere.
I've got an iMac27, late 2009, 16GB RAM, equipped with the latest version of Mountain Lion.
Hope, you can help me - there are some updates (MS Office, MyTomTom, Logitech drivers, ...) that need to be installed.
Thanks in advance,
Dirk.I would go thus;
1. Back up, preferably using bootable and verified clone(s).
2. Boot into recovery and repair permissions/disc.
3. Apply combo updater if step 2 was unsuccessful. (The link I have posted assumes you are running 10.7.3 as per your signature). -
Can't get any IP address from DHCP, but unattributed IP adress "already in use"
Hello,
I have a mac mini with a manual IP address (192.168.1.121) which connects fine to the internet through ethernet.
When switching to DHCP instead of manual, no IP address is ever given to me (blank space after IP adress: in the network prefpane)
however, I immediately have an alert popup that says the address 192.168.1.150 is already in use.
I wonder where I could change this 192.168.1.150 address since I do not have this setting at all on this machine on any Network Port, not in Airport and not in ethernet. (I have no other network ports)
How can I change a setting that I didn't make in the first place?
The console reports the problem once every second also, and there is quite a general slowdown and beachball because of this.
I tried to renew DHCP lease but it stays blank too.
I also try to delete ethernet interface, and trash the Network configuration in the general Library, reboot, recreate it but the problem remains.
I also have reinstalled Snow Leopard and applied updates with no better luck.
Thank you very much everyone if you have a clue.When you changed the setting to DHCP, did you click the Apply button? Also, you need to restart after changing from a manual IP address so the router can assign an unused address to the Mac when it detects it during startup.
-
Weird! Can't access any page on my iPod but Google??
The only page I can access is Google on Safari. This is weird.
The error message I keep getting is that the server stopped responding.
This is the case with all websites accept the home page on Google's search engine site.
My Computer has not problems at all with any pages.
Please help?Hi Gallon,
Thank you for your reply.
I have checked the WiFi Settings, and there are bars showing a WiFi Connection.
I have also checked all of the numbers under the DHCP in the connection settings and they are identical to my computer, accept the IP address is 10.0.1.5, whereas on the computer it is 10.0.1.4. Otherwise, everything looks the same.
Is there anything else I need to do to check these settings?
Thank you for your assistance. -
I can't find any error in my vi but it just doesn't work please help
I'm trying to control a robot named cs-113 and I find someone has already achieved this. He wrote a vi called robot cs-113.vi and I just tried to write a same one but it just doesn't work. Can anyone tell me why it doesn't work? Thanks for your help!
由 normanshi 在 08-01-2006 04:11 AM 上編輯的訊息
Attachments:
robot-cs113.vi 79 KB
cs-113 test.vi 62 KBIt would really help if you were a little more specific about what isn't working. Also try debugging your application in highlighted execution with probes to find out exactly what data you're sending out the port.
Jarrod S.
National Instruments
Maybe you are looking for
-
Bookmarks are still being updated and saved. Recently closed tabs, Recently closed windows are being recorded as they should. I have a single .json file on my profile directory, search.json. I don't know if there should be another one for the browsin
-
Hello, Do you know what I can do when my Iphone is blocked with the apple appearing ? I cannot enter into the phone and I don't know what to do ? Thank you for your help AMGSO
-
Remove "zeros" form a txt file created by Labview
Hi everyone, I got a problem with my txt data and I hope somebody will help here. I'm doing measuremnts and I'm saving the data in a txt. The saved data look like that: 0.000000 1.743435
-
Report cannot be rendered (com/sun/java/util/collections/Iterator)
Hello all I'm new both to Weblogic Server and BI Publisher. A few days ago I thought that I managed to install BI Publisher on top of Weblogic. It turns out to be untrue because I am not able to view any report, being it a sample or a newly created o
-
Is there a shelf stereo system that has a dock that works with the 4th Generation Touch?
Is there a Shelf Stereo system that has a dock that works with the 4th Generation I Pod Touch?