I Can't Open Batch Files
I Can't Open Batch Files
I go to open a batch file and an error message comes up saying "Windows cannot find "C:\Users\User\Desktop\(My Batch File).bat"
I really have no clue how to fix it.
For some reason when I go on run and search "cmd" nothing comes up and it says again "Windows cannot find....."
I only have cmd in my documents now.
I'm not sure if this is connected but hopefully someone will know the answer.
Hi Joshrob,
Have you installed any software or made an modification to this machine?
Please take the following steps to have a troubleshoot :
1.Run the antivirus software to have a full scan of the system.
2.Open the registry editor and check whether there is a registry key called “DisableCMD” and if it is there , please set its value as “0”.
3.Check the existence of “cmd.exe” in this path C:\Windows\System32.If it is there ,run it directly to have a check .If it is not presented ,you may need to copy one from another machine or perform a system restore to recover
the system to a previous normal point.
Best regards
Similar Messages
-
I can't open batch files in windows 8.1
I am trying to run a batch file in windows 8.1, when i run the batch file runs at first but closes so fast that you can't see its contents, you can't even see if its doing what you tell it to. Since the file does run but closes fast, i thought of adding
pause. Adding pause did not fix the problem. I am not sure if i have to change my keys on regedit, or i have some kind of malicious software that needs to be fixed ( I think i have no malicious software, i have run security scan many times
nothing showed up, I had a Trojan horse, Trojan.Gen2, long time ago but the Trojan got quarantined?) I originally had windows 8 but upgraded to windows 8.1.
Help Please! I don't Know what to do!!!Hi Glogikon,
"I am trying to run a batch file in windows 8.1, when i run the batch file runs at first but closes so fast that you can't see its contents, you can't even see if its doing what you tell it to."
According to my experience ,it is a normal symptom .Did the bat file run well before ?
Have you tried to run the command one by one in the bat file from a command line ?Have you tried to run the other bat files which including a output to have a check ?
If it is possible ,please post the command of the bat file here .We will make a test for you .
To check whether the bat run well ,this link may be useful:
check if command was successfull in a batch file
http://stackoverflow.com/questions/14691494/check-if-command-was-successfull-in-a-batch-file
" I think i have no malicious software, i have run security scan many times nothing showed up,"
We can try to work with the following official free tool to have a check .It is recommended to run it in a safe mode to improve the quality of the scanning.
Malicious Software Removal Tool
http://www.microsoft.com/security/pc-security/malware-removal.aspx
NOTE: This response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you. Microsoft does not control these sites and has not tested any software or information found on these sites.
Best regards
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
After the report files were moved to the directory under root in Linux, I can not open the file(.rdf) in my working directory in linux even though it doesn't work in the report builder in window.(it used to work fine)
error message the following;
rep-0110:unable to open file 'c:\documents and settings\myhome\desktop\invoice10.rdf
rep-1070:error while opening or saving a documents
can you tell me what it is the solution for that?
Message was edited by:
JinI think I have to recompile the files again.
I found the following solution but i do not know where do i write this script(Dos) and how to run it.
can you tell me more detail?
For Windows
Forms/Reports 6i
REM WINDOWS COMPILE FORMS
::compile_forms.bat
cls
Echo compiling Forms....
for %%f IN (*.fmb) do ifcmp60 userid=scott/tiger@v817 module=%%f batch=yes
module_type=form compile_all=yes window_state=minimize
ECHO FINISHED COMPILING
REM WINDOWS COMPILE REPORT
::compile_report.bat
cls
Echo compiling Report .....
for %%f IN (*.rdf) do RWCON60 userid=scott/tiger@v817 batch=yes source=%%f
stype=rdffile DTYPE=REPFILE OVERWRITE=yes logfile=log.txt
ECHO FINISHED COMPILINGMessage was edited by:
Jin
Message was edited by:
Jin
Message was edited by:
Jin -
I can not open the file in Photoshop...
I can not open the file in Photoshop after formattatto pc.
I get the following error "could not complete your request because there is an error in the program
Please me!
Thank youVersion CS3
Adobe DNG Converter and Camera Raw 4.6 update
6.2MB
10/10/2008
Camera Raw 4.6 update
3.5MB
10/10/2008
Camera Raw 4.5 update
3.5MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.5 update
6.1MB
7/28/2008
Adobe DNG Converter and Camera Raw 4.4.1 update
5.4MB
4/10/2008
Camera Raw 4.4.1 update
3.3MB
4/10/2008
Camera Raw 4.3.1 update
3.3MB
11/15/2007
Adobe Photoshop 10.0.1 update for Adobe Photoshop CS3
72.8MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.3.1 update
6.1MB
11/15/2007
Adobe DNG Converter and Camera Raw 4.2 update
5.9MB
9/13/2007
Camera Raw 4.2 update
3.2MB
9/13/2007
Camera Raw 4.1 update
3.2MB
5/30/2007
Adobe DNG Converter and Camera Raw 4.1 update -
I can not open adobe files that end in .doc. I purchased the 19.99 to convert doc to pdf and I still cant open. I get an error reading.
Hi,
Which Adobe Service did you purchased?
If you have purchased CreatePDF please visit: https://createpdf.acrobat.com/SignIn.html
Sign in with your Adobe ID and password, and then convert your word doc into PDF.
Please let me know if that works.
If you have Adobe Reader, you cannot convert .doc file to .PDF by drag and drop.
~ Aditya -
Can't open CR2 files in photoshop and camera raw
This weekend I rented a Canon 5D Mark iii. I have downloaded the files and all of the thumbnails in camera raw say CR2 and when I try to open Photoshop does not recognize this product.
I have:
Photoshop CS4
Camera Raw CS4
Canon 5D Mark ii
I have checked my updates folder and all my updates are current. Do I need to upgrade to CS5 or is there a way around this?Hi I recently had a problem opening CR2 files in PHotoshop cs4. I had to reinstall into a new computer, so obviously it installed the basic programme and not the updates.
After trying everything, even calling the help desk, there was apparently nothing that can be donw as they no longer support cs4.
I kept trying and found a you tube video, which i cant find again to add the link but i followed the link and with what I did earlier I can now open CR2 files in my photoshop cs4
I found the relevany update that I needed to install and downloaded it, camera raw 5.2 ( Adobe - Adobe Camera Raw and DNG Converter : For Windows : Camera Raw 5.2 update ) this is the one for the Canon 5d Mk2
After downloading it would not update the progeramme so I was in the same possition, but i noticed the files were there and i just needed to put them in the right place in photoshop so carried on looking for were to put the Plus In.
This led me to the video.
To the point.
Download the update and save to a location where you will remember.
open Adobe photoshop and go to "edit"
Them " Preferences "
then "General "
Then " Plus-Ins"
At the top you will see " Add Plug-Ins Folder " Check this box then navigate to the "win64" ( this is because mine is a windows 64 bit computer and the download is specific ) and Choose it.
Shut down photo shop and try to open a raw.
Bridge doesnt work for some reason but im going to keep looking.
Hope this works for you as well. -
Can't Open any files in photoshop CS3
I can not open any files in Photoshop CS3. It has been working fine. I was using camera raw and did not open the file and now can't open any file in photoshop. I reinstall it photoshop and it did not work. I reinstall install window xp worked fine until I tried camera raw. Canon (xti) Only cs3 is on the computer now
reset the preferences per the faq?
http://www.adobeforums.com/webx/.ef4a07f/1 -
Hi. I have a Dell PC running Windows 7 64 bit. I have the latest version of Adobe Reader, It worked yesterday. Today I have job training to do that is due tomorrow morning and I can't open PDF files. I have to open a guide and read it and take a test tomorrow. I have deleted and reinstalled the application. I have rebooted. I have made sure my PDF's are associated with the program. Every PDF on my computer won't open and I get the same error message. It simply says Attempt to access invalid address. How can I fix this? Thanks.
Hi Don,
I have seen this issue fixed for some users by modifying the following registry key:
The key is "HKLM\System\CurrentControlSet\Control\Session Manager\Memory Management" MoveImages
Set the key to 1 instead of 0 then reboot the machine.
In case you still face the issue try the following registry key change:
The only thing you have to do is rename the following key at the REGEDIT, and everything will be fine !!
BEFORE:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.exe
AFTER:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Image File Execution Options\iexplore.old
Note: Please take a backup of the registry before attempting this change.
Regards,
Rave -
Constantly, OneNote breaks and screws up my recordings that are synced with my lectures. It is such a fragile process and very frustrating. As soon as I'm done recording, I press stop. When I test the recording, it says, "We're sorry, we can't open
the file because it is in use by another program." I just recorded and then stopped it. If i close and reopen OneNote, it says, "oneNote is cleaning up from the last time it was open." And the recording still says it's in use by another program.
I've even restarted the laptop and it still won't open. The only way i could salvage the file is if I copy and paste it into another folder, and then it will open through windows media player, but all the live syncing with my notes are gone. Where are these
files stored? If I could save the sound and find the file/format that holds the syncing data again, I could work around this. They are no where to be found on my computer. Other forums give locations, but my folders are empty. Some other recordings work and
sync nicely, but I have still lost many recordings to this error. However, if I play a file and then close it without stopping playback, that file, too, will now be unusable. It will be stuck as "We're sorry, we can't open..." no matter what i do
and again i have to copy/paste it into a new folder and then move it back. I had the same problem on my last laptop. I record in Windows Media Audio 10 Professional at 192 kbs, 48 kHz, and stereo CBR. I need the high quality because the lecturer is too quiet.
It seems to happen when I record long lectures, 45 min+. Shorter recordings tend to work fine.
Please help, this would make note taking so much easier.A bit of a confusion on my part;
Now we have created these REPORTS using Basic Crystal Report 10.5, which comes bundled with Visual Studio 2008 and .Net Framework 3.0. Now on our machines, we have never experienced any issues.
Going by the above, you should have references to CR assemblies of version 10.5.3700 only. No other references.
Now, looking at this paragraph:
BUT on the DEV server (web server) which has .net Framework 3.0 and in its GAC its has CRYSTAL DLLs version 11.5 (required to create an Object of ReportClass and its related functions) ; sometimes we get the following error while exporting crystal report to pdf:
I wonder what runtime was deployed to the server. E.g.; if you are using CR 10.5, your assemblies will be 10.5.3700 and you should be deploying the following runtime (depending on 32 bit / 64 bit, etc.):
CRRedist2008_ia64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255262008E/CRRedist2008_ia64.zip
CRRedist2008_x64.msi
https://smpdl.sap-ag.de/~sapidp/012002523100006255272008E/CRRedist2008_x64.zip
CRRedist2008_x86.msi
https://smpdl.sap-ag.de/~sapidp/012002523100009351342008E/CRBasicVS2008_redist_x86.zip
One way to check on what is actually loading is to use the [Modules|https://smpdl.sap-ag.de/~sapidp/012002523100006252802008E/modules.zip] utility.
- Ludek -
Within the past week I have been getting messages when trying to open pdf files " that its in protected mode and can not open"
I deleted adobe and reinstalled directly from Adobe.com and now I can not open any file with a message it has encountered an error
and will check online for solution. Please assist as no files will open now
This is details of error
Problem Event Name: APPCRASH
Application Name: AcroRd32.exe
Application Version: 11.0.10.32
Application Timestamp: 547e9779
Fault Module Name: StackHash_147f
Fault Module Version: 0.0.0.0
Fault Module Timestamp: 00000000
Exception Code: c000041d
Exception Offset: 77a011f1
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 1033
Additional Information 1: 147f
Additional Information 2: 147ff66574b08dc93180d912e60eb897
Additional Information 3: c48b
Additional Information 4: c48be403c52ec6c06778481aaa8948d8
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txtCan you open Adobe Reader by itself? If so, try to disable Protected Mode [Edit | Preferenes | Security (Enhanced)].
-
Updated to latest ACR 6.6 but still can't open CR2 files from Canon Rebel XSi
I updated to latest version of Adobe Camera Raw 6.6 but still can't seem to open my CR2 files in Photoshop. Can't open them in Lightroom either, no preview in Bridge or OS.
I'm running OS 10.7.2 and Photshop 12.1 x 64 which is CS5.1 I suppose.
I've downloaded Canon's EOS utility hoping that would somehow do something as well but nothing.
The images were shot on Canon Rebel XSi which is certainly supported by the newest version of ACR. So I have no clue as to what's happening... I previously downloaded these images onto my old laptop about a year ago and everything was fine, however now I'm not even getting a preview in OS. Do I have to revert to an older version of ACR (perhaps the same one I used originally?) to open these files again? These files have been stored on a hard drive, so I'm not downloading them directly from the camera-again, this probably has nothing to do with it but not sure what to do. A lot of the posts I've seen recommend downloading the latest version of ACR to fix the issue, but again I've done that and as a matter of fact the camera (Rebel XSi) has been supported for some time now...
In OS, when the image is selected no preview:
Lightroom error:
Bridge, no preview:
Photoshop error:
Ideas, suggestions?
66 views on this discussion so far and no replies...
Please help.
Thanks in advance,
ArthurSomething appears to be wrong with your files.
Are most of your images approx. 3.7 MB?
This is very small for a 12 MP image.
If you go back to the original file on your laptop, what is the file size?
Also the fact that the Mac OS is not showing the preview is unusual.
Perhaps these files got corrupted when they were moved to your new computer.
Can you open these files OK on your old laptop?
Is the OS showing the previews on your old laptop?
Also compare the file sizes between old and new computer.
Have you tried repairing your permissions?
Try Disk Utility in your Macs Applications - Utilities - Disk Utility to see if this helps.
Good Luck! -
I can't open pages files from USB and iCloud due to : "The necessary file index.xml is missing". Original file is written on iMac (2014) and saved to an USB stick and then transferred till macBook Pro (2009, Yosemite) for editing. Then I shared the files by iCloud but I am not able to open them on iMac again. Niether can I use the USB stick to transfer the edited files back. I'm running Pages '09 4,1 (923) on the macBook and Pges 5.5.2 (2120) on the iMac.
HåkanPages 5.5.2 is extremely incompatible with even other Macs let alone the vast majority of PC and MsWord users out there, so not a good idea to leap into the fire with both eyes shut.
After having done that to the first Pages 5 files, Apple has repeatedly done it to even the most minor point updates. Apple can't even anticipate its own erratic changes let alone what everyone else needs doing.
Peter -
Error message: "Dreamweaver can't open .jpg files"
I'm using DW 8, and I have installed the 8.0.2 update. I'm
having trouble inserting certain JPG images into a site. I get an
error message pop-up that states "Dreamweaver can't open .jpg
files". It will allow me to insert some jpg files, but not all of
them. I've tried drag & drop and going through the Insert menu.
The files are not large at all. Doesn't appear to be any problem
with png's or gif's. It's incredibly frustrating. Anyone have any
suggestions? TIA.> why was i taught that all my web images need
> to be in 72dpi if it doesn't really matter?
most people suggest 72 because it was an old standard with
the early
macintosh DTP programs. For web use it's easier to
standardize on it because
when you make an image, you have to put ~some~ number in the
resolution box
and it might as well be 72 as any other number. It simplifies
moving image
files around in different applications if they are all the
same resolution.
For display in a browser, these will all have the same file
size and display
size in a web page:
600x600 pixels at 1dpi
600x600 pixels at 72dpi
600x600 pixels at 6000dpi
It's when they are used in other applications or when a
direct url like
/photos/1.jpg is printed out that they may display in the
resolution, not
the pixel dimension.
I came across a page once where the designer always saved his
images with a
resolution of 6000 dpi or some other odd number because he
thought that if
people dragged the image off the page to save it- most of
them wouldn't be
able to resize it. or some other idiot reason maybe.
Alan
Adobe Community Expert, dreamweaver
http://www.adobe.com/communities/experts/ -
Can't open .jar file, nothing happens when I click, MAC OS 10.6.8
Hello,
I can't open .jar file, nothing happens when I click on the .jar file.
I have MAC OS 10.6.8
The thing it, I have desktop application that I'm building on Netbeans and when I compile and deploy it... it runs from Netbeans folder where I have all the files but copying the .jar on the desktop. It says "The Java JAR file "blablabla.jar" could not be launched check the Console for possible error messages"
Any idea or solution will be appreciated.
Thanks in advance
CharlesThese are Java files. http://www.java.com/en/ is where you can get the latest Java for your operating system. If your Java files need an older version of Java, there are instructions on the web to downgrade Mac Java, but it is difficult, and poses security issues.
-
I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files.
Maybe you are looking for
-
How to use multiple scripts on a single .fla file
Hi, I'm making a tiny game and don't want to have thousands upon thousands of lines of code to deal with. I was curious if there was a way to use a different script for a different level in my game.
-
Volume control with USB Audio device
Hello all. I have just purchased a cheap USB audio device to connect my HiFi to my laptop with only one, neat USB lead and a USB hub - meaning I no longer need several USB wires and an audio cable across my desk. This works fine, but I have just noti
-
Service Contract header, line level and party data report.
Using 11.5.9. In Service Contracts Module, trying to create a query that extracts header data, party data (role and name) and the name of the service from the lines/account tab, ie Full Service, Gold Service etc... Created query that retrieve Service
-
Invoke a Webservice that return a SAML assertion
Dear Developers, how can i invoke a Synchronous Webservices(AuthenticateUserService) that reteurn an authentication assertion (SAML assertion) and then use this authentication assertion to invoke another service. the AuthenticateUserService has one w
-
I need to know where to download acrobat X. I have proof of purchase, serial no, etc. I had downloaded the acrobat xi trial, and decided to just keep x, but now I can't find it on my computer?