I can´t open FC project ( it is related to my previous post: File error: Access denied when trying to export).

1- Are you using material with an avid codec?
No, I did not use material with avid codec but I wanted to export to a .avi video.
2- What exactly are your clip settings and your sequence settings?
Cilp setting are HDV-1080i50
The secuence is as well HDV-1080i50
3- What do you mean by "mac block?"
Sorry for the word, what I mean is that My Mac collapsed. I was trying to export a video
I was trying to export:
I could not:
The destiny specificated does not allow access for read/write
Check if the folder is just a read folder or check your writing permission.
So I tried to change permissions of the Hard Disk with OS, then, one after another some windows appeared, here first of them, and a detail:
The system extension can´t be used
The system extension "/System/Library/ Extensions/ACard671xSCSI.kext" was not well instaled, the it can be used. Try to reinstal it or contact manofacturer to obtain a update.
Acept
(NOTE: there were a lot of more windows related to differents extensions, some are: "Sustem/Library/Extensions/Apple BMC.Kext"; "(...)Apple EFI Runtime.kext" , "(...) AppleEFIRuntime.Kext/Contents/Plugins/AppleEFINVRAM-kext", etc. I have almost all captured, in case you need more details I can upload the as well).
Then, I turn off the computer (because it stop working with all those pop ups windows) and next time I tried to turn it on, it never restart again ( it turn in but never start the OS), therefore I restarted from the DVD.
4- What did you do when you restarted your mac from the dvd os?
   I just installed over the OS ( advised by a mac technitian), since then...
when I start my mac some windows pop up:
The first window says:
One low safe start item was desactivated
"/Library/StartupItems/DigidesignLoader" was not runnig because it has not the security protocol adjusted.
Acept
The others are the same with: "StartupItems/PACESupport" ,with "StartupItems/Qmaster" and with "StartupItems/SATARaid5Daemon"
And when I try to open FC fileproject a window show up:
Final Cut close unexpectedly while AvidV1xCodec was being used.
I have tried ignore it and restart it a nothing works.
AND THIS IS PRECISELY THE PROBLEM!!
5- Does the mac see the external hard disk?
     Did you try and repair the external drive?
     What format is the external drive?
I have the external disk in technical service, they will try to repair it. It was in MacPlus (registrered) format, configured in Raid 0 ( two hard disk enclosed together and working as one). Now, to recaptured the tapes for the project I have purchase another hard disk ( 1 T and configured it with MacPlus (registrered) format), this new hard disk is well detected by my computer.
My version of OS is
Well, that all I can tell about what happen to me.
Now, as I have said, I can´t open the FC Project.
I have tried to clean the user profile of FC and it doesn´t work either... need some advise..., thanks for your help!!

lotta stuff going on. I'm in the office now and don't expect a client for about 45 minutes. Want to walk thru this via skype or ichat? email me directly if you do. [email protected]
If not, post back and I'll try and walk thru these things.
Also, if you want to email me the project, I'll see if I can open it here.

Similar Messages

Why would an error pop up saying the installer is damaged. The Installer can't open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

why would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.

Ask your question.Can't render get File error access denied. Whats causing this? FCP 7.0.3

I Can't render get File error access denied. Whats causing this? FCP 7.0.3

Its an was update from an earlier version.
What earlier version?
And you're saying when you using File>Import>File and select a JPEG you get the error message?
You can't or shouldn't import MP3s into FCP.
Have you try creating a new porject and importing into that?

Access Denied when trying to open a file that is encrypted on network share with EFS

I just recently enabled EFS on the default domain policy and created a new network share, encrypted a file and added myself to that file and tried to open the file from my workstation. I then receive an error "Access denied", I also tried
to create a file and encrypt it on that same share and get an error "The requested operation cannot be completed. The computer must be trusted for delegation and the current user account must be configured to allow delegation."
My steps.
1. Enable group policy for EFS, removed the expired certificate that was already there and Created a new Data recovery agent.
2. Created a network share, created a test file, enabled encryption on the file
3. certmgr.msc, personal and requested a new certificate, Basic EFS
4. On the network share and properties of file, advanced, details and added the user
5. from the workstation tried to access the file, Access Denied. I can create any file I won't just can't add attributes to encrypt the file or open an encrypted file
Now if I go to the server where the CA is located which is also the AD server and create share and run the same process it works as expected. I'm guessing I have to export the cert from the CA server as a pfx and import that to both the server that
has the network share and the workstation but that still doesn't seem to work. Maybe I don't understand how EFS works and this is not possible? Any suggestions would be appreciated.

You are correct in not understanding how EFS works.
When you connect to an encrypted file via a network share, the encryption/decryption takes place *on* the server. To enable over the network access, the server's computer account must be trusted for delegation.
The server actually impersonates the user and creates a user profile on the server (containing the defined EFS certificate and private key). The important thing to remember is that the files is transmitted in clear text from the server to the client.
See http://blogs.technet.com/b/instan/archive/2010/08/11/remote-efs-decryption-and-trusted-for-delegation-requirements.aspx
Brian

Can't open CS 5.0.4 Premiere Pro because of bin-file error.

I'm on an:
iMac
OS X 10.6.8
12 GB RAM
3.06GHz
I've had trouble with CS5 so i upgraded to CS5.0.4 PP and I cant open my project. It's a large project, over an hour long movie. I've spent over 7 grand of my own cash on it and a year of my life. This means the world to me to fix.
whenever I open Premeire it says :
Reverb
Can not open bin-file.
i understand that is an audio plug in error and i've been searching for it 10 hours. I know if i find it, remove it from the folder, it will open with all my reverbed audio gone. I'm fine with that, I can not for the life of me figure it out.
I'm begging for help.
Thanks,
Brett.

You didn't say if you were trying to load the Organizer or the Editor.
If its the Organizer, here are some troubleshooting tips: http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Organiz er_crashes
If its the Editor, here are some troubleshooting tips: http://www.johnrellis.com/psedbtool/photoshopelements-6-7-faq.htm#_Troubleshooting_Editor_ crashes

Hello, does anyone gets " there was an error opening this Doc. Access denied" when trying opening a document"

Sometimes I create pdf docs and when trying to open them i get the above error...Anyone can help me with a solution?

Hi Alfredo,
Are you using a windows system or a Mac?
I would recommend you to check if any other system resource / program is accessing that file or if you have proper permissions to access that file.
Regards,
Rahul

File error: Access Denied in FCP when trying to save a project.

Can anyone help? I'm trying to save a project in FCP, however I keep getting an error stating access denied.
Thanks

Save it to a different folder or hard drive, quit and then try repairing your permissions with Disk Utility...
You could also go to the folder where you are trying to save to, press command-i and check to see if the ownership is correct... then try to save (then run the Permissions repair).

Windows Update for Security Essentials causes FDF-PDF network opening a file error:Access Denied

We open PDF files on mapped network drives, using FDF forms with fields. The latest Windows Update (12/15/14) KB2310138 is now causing the Adobe Reader application to say "Access Denied". I know it is the update for sure. I have one computer WITH the update that gets the error, another without that doesn't. If I change the "/F" reference in the FDF to use a local "C:" copy of the PDF, there is no error message.
Cannot undo the Windows Update. Although it shows on the history list, when I go into "Installed Updates" to undo it, it is not listed there.
Help!

Hi,
Are you still facing this issue?
Regards,
Ajlan Huda.

How can I open a project made in 2000 on Final Cut Pro to migrate it to a new version?

how can I open a project made in late 2000 on Final Cut Pro to migrate it to a new version to finish editing it? files, timeline and unfinished edit are all stored on hard drive since early 2001, with all the original miniDV tapes still in hand

Do you still have legacy FCP? If you not you need to find someone who will open the project in FCP6.0.6 or later. Export an XML file of the project. Use 7toX to convert it to an XML format that works with FCPX. Import the converted XML file to FCP.

Old Logic + a new Mac = can't open old projects anymore. De/re-install?

Hi everybody,
maybe someone can advise me with this problem:
I bought a new Mac recently, did install a fresh OSX 10.5 and then used migration assistant to transfer my old user account from my old Mac (10.4), incl. all files. It did take a night, but it worked - or so I thought. Actually all applications work as they should, except for Logic. I had to re-authorize a few plug-ins, but then all seemed to be cool. I can open a new project, record audio, midi, add plug-ins, all cool. But I ended up with 3 problems, which are really annoying:
1) EXS24 couldn't find most of the samples anymore. Most, not all. I have 4 internal HDs, one for the system, one for audio recordings, one for samples, one for "other stuff". 2 of these disks came from the old Mac, 2 new ones, content copied from old Mac. In the EXS prefs I set "search for samples" to "all volumes", but it still didn't work perfectly. Finally I bought EXSManager Pro and now it seems to work again. I didn't try ALL samples yet, but the +/- 20 EXS instruments I tried, did load all samples.
2) Space Designer doesn't load impulse responses for the presets anymore. They're there and at the right place. I can load SD and import an existing impulse file, no problem. But the presets don't find the required files anymore.
3) Now - and this is the worst one - I can't open old projects anymore. I just can't. It starts loading, I see the rainbow thing (don't know the right word), it turns black & white and that's it. You can watch this forever and nothing happens.
Regarding all 3 issues:
I don't get any error messages. Logic doesn't crash, I can't click 'apple-.' to stop loading/searching. It just doesn't open the file. I had a coffee, a pizza, I let it try for 2 hrs+, but neither did it load a SD preset or an old song file. All I can do is manually quit Logic.
But when I open Logic with the CTRL-button down and click "no" to core audio I can open all songs. Of course I can not hear a tone then, but it's all there. Opening a song takes 3 secs then. I tried to safe a song then with a different name, re-started Logic with core audio but same result. It get's "stuck".
Of course I checked user permissions and all the usual trouble shooting clicks, but still Logic has a mind of it's own. I installed a 2nd user with admin rights, though still the same, plus all the 3rd party plug-ins refusing to work.
Now I was thinking, should I de-install Logic and re-install from the original CDs maybe. And if so, is there anything special I have to take care of? Like manually removing any prefs or cache files?
Or completely re-install the whole Mac? (pleeease no....)...
If anybody has any idea, it'd be highly appreciated.
Thank you in advance and for the energy to read my little novel here,
cheers,
Joern

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premier

My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!

Hi Bryan,
My video i have successfully worked on for seven days now won't open at all. It says there is no sequence of this type found... But in the very bottom bar I can see the whole project load. But the only option from the error screen is exit out of Premiere Pro CC. I am on a PC withe Windows 8.1 and apps are up to date. Thanks much for any help!!
Sounds like an activation issue. Quite Premiere Pro. Sign out of Creative Cloud. Restart Premiere Pro. Sign back in: http://bit.ly/CC-sign-out
Hope that works for you.
Kevin

Can I Open RH5 project file in RH10?

I don't like registration of all kinds until I took an RH arrow in the knee. XDD
Here's my scenario:
My colleague created a project in RH5 long time ago and now she's handing over the project to me.
I copied the whole robo source files folder to my local disk and tried to open it in RH10. Then error saying .cpd file might be corrupt so that RH cannot load the data from the database. I know .cpd file is the cache file for a RH project, right? It's created/overwritten every time you open the RH project. Then I figured, maybe I should delete the .cpd file(as it might be created in RH5 in her machine) before I open it in RH10?
Also, I've tried to open the same project file in RH5(I have RH5 and RH10 installed in the same OS:Win 7). It worked for the first time, with lots of errors of broken links and reference links but failed for the second time, right after I opened that project in RH10. (You might will want to doubt if RH5 is executable in Win 7, I thought it should be but it turned out it is, which is amazing...)
So..here're the questions:
1. Do RH5 and RH10 coexist in Win 7? Some said they don't..
2. Should I delete the .cpd file created in lower version of RH before I open the project created in RH of lower version(say, RH5) in RH of higher version(in this case, RH10)?
3. Can RH10 open the project created in RH5? I know the project created in RH of lower version will be converted in some way when it's opened in RH of higher version. Anyone practiced this successfully?
Thank you!

It proves that X5 can be opened. It does not prove it will work properly in all respects. Also webhelp will likely have issues with some browsers. In other words and to answer your question, both can be on the same machine but that does not mean both will work as designed.
Rh8 could be used with Windows 7 when Rh8 was released, except bits broke until it was patched so the chances of X5 are rather low.
MS Access is not needed on your machine as the CPD is a runtime database. There's no point messing with it, leave Rh to recreate it.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

The operation can't be completed because an unexped error occurred (error code-50). This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive. Then this morning I can't open my project file. What to do?

Message: The operation can't be completed because an unexped error occurred (error code-50).
This appears when I'm copying a file to the drive and then I wasn't able to edit to my drive.
Then this morning I can't open my project file. I get this message: The project appears to be damaged, it cannot be opened.
What should I do!??
I have moved my project onto 2 different external hard-drives now.

Hi There,
After looking around for this error, it seems to be related to OS, we would recommend you to contact Apple support for this.
Thanks,
Atul Saini

After the recent update on my Ipad Mini. It crashes frequently. The latest is that during saving, it crashed. Now I can't open my project file. It says, Not a valid Adobe Photoshop Touch file. What happened?!!

After the recent update on my Ipad Mini. It crashes frequently. The latest is that during saving, it crashed. Now I can't open my project file. It says, Not a valid Adobe Photoshop Touch file. What happened?!!

Sufficient free storage.... tried the reboot and install... Just received an iOS update I'll install tonight and do another reboot...see what happens. Going to have to start saving double..

Can't open a project who has a merged clip in it

I have 2 Macs using Premiere Pro CC, same version. On one of my 2 Mac, i can't open any project who has merged clips in it. It shows this error message. : "this project contained a sequence that could not be opened. No sequence preview preset file or codec could be associated with thi sequence type". It shows this even if there is no sequence in the project. It happens only if i have a merged clip. it could even be a merged audio clip. What can i do?

Hello Spadrille,
It sounds like your application is not activated. Try this: Open a new project in Premiere Pro. Choose Help > Decativate > Restart Premiere Pro. Then choose Help > Activate. See if that solves your problem.
Thanks,
Kevin

I can´t open FC project ( it is related to my previous post: File error: Access denied when trying to export).

Similar Messages

Maybe you are looking for