I can't open files after redownloading Adode Digital Editions

I redownloaded Adobe Digital Editions after my laptop crashed and had to be restored to its out-of-box state. But now some of the acsm and pdf files I could open can't be opened anymore. I continually get an error message about failing to obtain the license for these files. Is there a way to fix this?
Thank you.

You need to make sure your new copy of ADE (Digital Editions) is registered with exactly the same Adobe ID as your old one was.
DRM books are locked to a particular Adobe ID.
Authorize it (ctrl-shift-u, or menu/Help/Authorize Computer).
If that doesn't work, try deauthorizing and reauthorizing as below.
~~~~~
Sometimes ADE gets its registration/activation confused and in a semi-authorized state.
Uninstalling and reinstalling does not help.
Unfortunately, it often then gives misleading error messages about what is wrong.
A common incorrect message informs you that the ID is already in use on another computer and cannot be reused.
This can often be resolved by completely removing any authorization using ctrl-shift-D to the Library screen on ADE (cmd-shift-D if on Mac).
Restart ADE, and then reauthorize with your (old) Adobe ID.
In extreme cases on the mac, the following extra step has helped some people. Navigate to /Users//Library/Application Support/Adobe/Digital Editions and drag the activation.dat file to the trash. If you are using 10.7, see Access hidden user library files | Mac OS 10.7 Lion. http://forums.adobe.com/thread/1265248?tstart=0

Similar Messages

How can I open two screens of Adobe digital editions at the same time?

How can I open two screens of Adobe digital editions at the same time?

I doubt that you can. Doesn't the Sound prefpane require you to select just one output device?

Can't open file after Keynote crashed

I was working on a large Keynote file (about 130 Mb), when Keynote (4.0.1) quite unexpectedly. It happened a few times before, and I thought it was because of the instability of the new Leopard system. This time, however, I could not open the file after the crash. An error message was displayed: "Can't open file" followed by the path and the file name.
Does this happen to anyone else? Can anyone help? I hate to lose the work and go back to an early version.

Keynote and Leopard, especially in their newest iterations, are remarkably stable. That said, no file, program, or OS is totally immune from corruption. Whenever a program, or worse, your Mac, even starts to behave strangely, your first step ought to be to attend to it with a good fixit utility. Repairing permissions is usually fruitless, since it's highly unlikely there's a permissions problem. You already own *Disk Utility*, so you should try to repair the disk with that. Unfortunately, DU's disk repair is pretty wimpy, often unable to repair a problem, or erroneously reporting no problem when one obviously exists.
So, if you own a Mac, you owe it to yourself to buy at least one (but better, two) industrial-strength utility. There are really only three to choose from:
1. DiskWarrior is an absolute must. It's unbeatable in rebuilding the directory, and the directory is usually what's corrupted. It can now fix files, too, which is also helpful.
2. *TechTool Pro* is an excellent suite of fixits - directory, files, defrag, and some hardware tests. It also has a wonder feature, the eDrive. This is a small (10GB) bootable partition on your boot drive which has, among other things, TTP on it. If your main boot partition has a problem, you can boot from here and usually fix things. AFAIC, it's an absolute must on a laptop which you take on trips, far from your collection of fixit disks. You can also put DW on this partition, so you have everything you need right at your fingertips.
3. *Drive Genius* is a relative new-comer, also a good suite of fixits, and, I believe, does backups, too.
I have 1 and 2, and that has saved me from catastrophe more than once. 1 and 3 would probably be good, too. (You ought to have more than one of these serious apps because one can sometimes fix something another can't - different proprietary algorithms.)
One last thing: if you have anything on your computer it'd break your heart to lose (and who doesn't), remember +The First Rule of Computing+: There are two kinds of computer users: those who have already lost all their data at least once, and those who have not yet lost all their data at least once. So: *backup, backup, backup*. I vote for bootable clones, done often (at least daily if you work daily), TimeMachine is pretty good, and there are other options. Pick one, and do it religiously.

Can't open files after update to Adobe Reader 10.1.1

I have Windows 7, 64 bit. I recently relented to constant requests to update my Adobe Reader 9.0 (free vers.) to Adobe Reader X. The update erased my former version. Now I can't open any of the .pdf files as it says "the network path was not found." I tried the Repair installation, it just installed Adobe Reader 10.1.1, which I assume is the same as the X version. How do I get Adobe Reader to open my .pdf files?

Try running the combo update.
10.9.5 Combo Update
If that doesn't work, try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Mavericks
Safe Mode - About

Quicktime Can't open files after 10.4.10 update

I thought I had escaped all problems after installing the 10.4.10 combo updater, repairing permissions, etc. But today while trying to watch the iPhone Guided Tour video I discovered that Quicktime can't open it, nor anything else for that matter. Can't open audio files of any type, nor any video format. I have the current version of Quicktime, and after reinstalling it and reinstalling the combo updater, the situation remains broken. Quicktime Player will launch, but only to an error message :"Error Opening Movie. The movie could not be opened."
Curiously I can watch the iPhone movie in iTunes. And all other audio formats supported by iTunes play as usual. Any suggestions?

Hey Douglas,
Would you mind expounding on this .... there is more than one Library.
In the "main" (not the house user library) I did find a file in the Quick Time folder "Toast Video CD Support.qtx", and I removed it (that was the only file in there). Still getting the gray ? mark.
Trying everything suggested in this forum and then some ... no good.
did you try removing 3rd party codecs from the
/Library/Quicktime folder to see if one of them has a
conflict with the update?

Can't open file after editing video in CS5

I have now tried editing a video file three times in PHotoshop. Each time it has frozen during export, and when I Force Quit and try to reopen the file I get an error message that I can't open this format of document with my version. I have an Education version of CS5, so I have the Extended version of Photoshop. This is driving me crazy. Any ideas?
Garrett

Found another related thread and the tip to confirm that PS was up to date. After updating the file worked.
Finding the right answer in here takes too much work (or did I miss the way to search for answers?). Lots of posts on this topic, but only one helpful answer that I found.

Can't open files after canceling sub

I tried the Creative Cloud on a trial basis and then canceled. The problem now is that the latest Adobe Reader, which is no longer operating on my computer, is still the default program when I try to open a PDF. It won't let me open files. I have an older program that works. How do I make this the default reader?

Hi saranac laker,
Right click on any pdf file/go to properties/In general tab select open with and change Acrobat, select Reader as a default application to open the pdf files.
Regards,
Romit Sinha

Pagemaker 6.0 can't open files after OS X installed

after i installed OS X, files that were created using Pagemaker 6.0 are now "unix executable files" (the icon is a gray box with 'exec' in the upper left corner) which are not recognized when running pgm 6.0 in classic mode and cannot be designated to be opened with pagemaker. what's going on with this? and can i ever open these files again???
powerbook (bronze) Mac OS X (10.3.9)

In addition to deleting the AppleWorks preferences, use Disk Utility to repair permissions after any system update/upgrade/reinstall.
A couple of other things to try after that if it still doesn't work as it should.
See my user tip, AppleWorks 6 won't open my AW 5 files, to "tell" AppleWorks these files are AW files.
Highlight a known AppleWorks document in the Finder, highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose AppleWorks. If AppleWorks is not a choice, choose "Other" & navigate to the AppleWorks application. Now click the "Change" button under the text that asks if you want to open all documents like this with AppleWorks.
Peggy

Can't open files after clean install

Hi, I just had to wipe my drive clean and do a full fresh install of OSX 10.2.8...
... and now many of my Appleworks files aren't opening up. When I click on them I get a "No Bluetooth Hardware Found" error message, and bluetooth opens up on my dock.
I'm using Appleworks 6.2.9 for OSX, and then went back and installed a Classic Appleworks 6.0.4.
The problem is mostly on older documents created prior to v.6, but it also seems to be happening with newer documents created using v. 6 in OSX too.
Using the file -> open --> and selecting the document doesn't always solver the problem , and having to go into the application to open the files is far from convenient anyway.
If anyone can be of help it would be greatly appreciated!

In addition to deleting the AppleWorks preferences, use Disk Utility to repair permissions after any system update/upgrade/reinstall.
A couple of other things to try after that if it still doesn't work as it should.
See my user tip, AppleWorks 6 won't open my AW 5 files, to "tell" AppleWorks these files are AW files.
Highlight a known AppleWorks document in the Finder, highlight it & choose Get Info from the File menu. In the Get Info box, click the triangle next to "Open With." Click on this drop-down menu & choose AppleWorks. If AppleWorks is not a choice, choose "Other" & navigate to the AppleWorks application. Now click the "Change" button under the text that asks if you want to open all documents like this with AppleWorks.
Peggy

Can't open file after upgrade to 10.8.1

I use Indesign CS5(Trad. Chinese version). When i upgrade to 10.8 is no problem, but when i upgrade to 10.8.1 last week, i can open any previous ID document! Even i create a new document , i close it , & also cant open!! Its shows a dialog box means the file crash before, selection is fix ,cancel or reopen, but any select also can fix & cant open !!!
Finally i downgrade to 10.8 from my Time Machine, everything gonna OK again!!!
Will Adobe fix this problem? or i cant upgrade to 10.8.2...10.8.3....etc any more!!

Why don’t you ask Apple? It was their update that broke it.
And I would not count on any updates to CS5. It’s two version out of date.
FWIW, that 10.8.1 update helped a lot of people having problems with CS6.
Bob

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. I tried RIGHT-CLICK and the "open dowloading folder" or something does not work! P

How can I OPEN files I just downloaded? They're on the DOWNLOADS screen of Firefox but I can't open them even after double-clicking? And they're not on the FOLDERS as well. Even the right-click is not working ... the "open containing folder" does not work.
== This happened ==
Not sure how often
== ALWAYS! ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.5; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; InfoPath.2)

Open Containing Folders is never active.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004 Please help me in solving this problem.

Hello Sorry for the inconvenience, but I have a problem in Java I can not open files, audio chat, which type of jnlp after the last update of the Java 2012-004
Please help me in solving this problem.

Make sure Java is enable in your browser's security settings.
Open Java Preferences (in Utilities folder)
Make sure Web-start applications are enabled.
Drag Java 32-bit to the top of the list.
jnlp isn't an audio file format. It's just a java web-start program (Java Network Launching Protocol).

After update to OS X Maverick I can not open files in Lotus Notes Smart suite. Is there any way to solve this problem?

After I updated to OS X Maverick I can not open files in Lotus Notes Smart suite. Is there any way to solve this problem?

Ok this worked to solve the error.
Use cmd prompt in windows 7 or 8 and run as admin:
sc config lanmanworkstation depend= bowser/mrxsmb10/nsi
sc config mrxsmb20 start= disabled
No need for all that power shell nonsense as shown elsewhere for windows 8.
That's it. Also force smb2 disabling on the apple side for good measure.
With the above I was able to network mavericks and windows 8.1 pro flawlessly. He issues I had before where I could not read video, ISO and audio files (but could open documents and pictures from the windows machine connected to an apple network share folder went away.

After o download the browser ,i get message that says can not open file what do i need to do to download the browser i have tried 5 times get same message

its the same shit i asked before after i download the browser i get message can not open file what do i do to dwonload the browser

That message is usually a sign that you tried to roll back to an earlier build of iTunes, but occasionally I've seen it connected to a new upgrade. This technique should fix things.
Empty/corrupt library after upgrade/crash
Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
When you get it all working make a backup!
tt2

Can't open file: "Could not complete your request because of a program error"

I have a Photoshop file that suddenly won't open. Last week I upgraded to CS5--the file had been created in CS3 prior to that. When I try to open it, I receive this error message (in CS5): "Could not complete your request because of a program error." I tried to open the same file in CS3; there, the file opens, but as soon as I try to do anything I get the same error message....which, annoyingly, re-appears the second I click "OK," so the only thing I can do in CS3 is force-quit.
I've used Time Machine to retrieve versions of the file that were saved four days ago, seven days, and several weeks ago, and I get the same message every time. Even on versions that were last saved with CS3 (before I installed CS5).
Naturally, this is one of the most important files in my life right now....it's a 300 MB file that contains hundreds of layers and dozens of comps. So the fact that I suddenly can't open it, after shelling out $1200 to upgrade to the latest and greatest Adobe has to offer, is, to say the least, distressing.
Any advice will be appreciated.
Thanks,
TheWocky

First thing I would do is investigate hard drive issues and the health of the OS.

I can't open files after redownloading Adode Digital Editions

Similar Messages

Maybe you are looking for