I can't open itunes after installation, says"itunes.exe-application error"

first time, I installed ipod and itunes from the cd, it failed. then I downloaded from the website and reinstalled, it didn't work, either. afterward I have tried many times to delete,restart and reinstall, it just didn't work at all>_<
every time i double-click the itunes.exe, it says
【itunes.exe-application error
the instruction at "0x10001040"referenced memory at "0x10001040". the memory could not be "read"
click on OK to terminate the program
click on CANCEL to debug the program】
I tried to delete quicktime as well, but it showed that it could not be deleted or something like that...
I can't download music from the computer due to the unworked itunes...help~~~~~~~>_< 
Windows XP

"the following file doesn't exist or is not a valid uninstallation log file
C:\WINDOWS\SYSTEM32\QUICKTIME\UNINSTALL.LOG"
ahhhhh ... one of those.
oddly enough, these ones typically respond better to brute force than they do to finesse. rather than uninstalling QuickTime first, try doing a standalone QuickTime 7.1.5 install "over the top" of what you've already got in there:
Quicktime 7.1.5 Installers … get the one that doesn’t mention iTunes
if the standalone install goes through okay, does your iTunes start launching properly again?

Similar Messages

Can't open iPhoto after installation .Displays message :You can't open your current photo library using this version of iPhoto

Can't open the program after Installing . Shows message " You can't open your current current photo library using this version of photo.
Made several attemps in fresh instalaltion without any success.

So I assume it is version 9.3, not sure?
Look at the application in the Finde, if you cannot launch it.
Select your iPhoto application in in the Applications folder and use the command "File > Get Info". What does the Info panel show in the "General" brick?
If it says 9.4.3, try to launch iPhoto by clicking the iPhoto icon in the Applications folder. Does that work?

I can't open CS6 after installation on Windows 7. How do I do it?

I have downloaded the Cs6 trial version but cannot open it. I have browsed the net to fine program to do it but no program can be found. What do I do?

If you downloaded the trial version and the installer will not work, try to download it again. Please wait it takes a long time to download some of the suites. If that still doesn't work, please let us know what OS and which CS6 trial you are trying to install.

Hi, lightroom has crashed. I am using windows 7. I can't open lightroom after trying to access a catalogue. error reading

the error reading is: lightroom-opening catalogue. Temporary import data.d.h.Ircat. This message appears every time I try to access lightroom. It tells me that a shortcut has stopped working.

Thanks Geoff. I was finally able to locate the ".lrcat.lock" file relevant to the catalog I want to open. Once I deleted it, LR5 was able to access my images. Problem solved. THANK YOU

After closing Firefox a small window appears with the title saying firefox.exe - Application Error.

If I click OK the appears again, and again and again. No matter how much I click OK or try to Exit the window it just will not go away.
The window says, The intruction at "0x1fb37800" referenced memory at "0x1fb37800". The memory could not be "read".
Click on OK to terminate the program"
Please somebody kindly help me.

Hi,
Please check if this happens in a [https://support.mozilla.org/en-US/kb/Managing-profiles new profile]. If the new profile is okay, you can later [https://support.mozilla.org/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile?s=profile&r=1&e=sph&as=s copy the needed personal data] from the old profile. Firefox stores your personal data and settings in [http://kb.mozillazine.org/Profile_folder another location (profile folder)] separate from its [http://kb.mozillazine.org/Installation_directory files/folder]. A new profile would have the default Firefox settings ('''Tools''' ('''Alt''' + '''T''') > [https://support.mozilla.org/en-US/kb/Options%20window '''Options'''], and [http://kb.mozillazine.org/About:config about:config] ), and usually would also be empty of any '''Extensions''' and themes ('''Appearance''') in Tools > Add-ons) and their settings. Also, a new profile would have no previous stored website data/settings etc., ('''Tools''' > [https://support.mozilla.org/en-US/kb/Clear%20Recent%20History '''Clear Recent History''']).
[https://support.mozilla.org/en-US/kb/Profiles?s=profile&r=2&e=sph&as=s Profiles Howto]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Profile Folder & Files]
[http://kb.mozillazine.org/About:config_entries about:config Entries]

I just downloaded firefox 7.0.1 and when I try to open it I get a firefox.exe - application error stating "instruction at 0x1000863c referenced memory at 0x1000863c. The memory could not be read." The application never opens. what can I do?

As stated above I get an error message when I try to open Firefox. The options given in the message are "click OK to terminate program" or "click CANCEL to deug program".

I have now downloaded an older version of firefox and it seems to be working as long as I don't use the google homepage or search.
I am guessing that my computer is just to old to support the 7.0.1 version.
Thanks for your help.

I keep getting a message that says "Firefox.exe – application error The exception unknown software exception (0xc0000417) occurred in the application at location 0x78579231" and when i click ok it closes my firefox window.

I've already tried uninstalling firefox and then reinstalling it. (i've done this twice but it still keeps giving me this message.

Please reinstall Firefox as follows: 
#Go to [http://www.mozilla.com/en-US/firefox/fx/?ref=logo Download Firefox 4.0.1] and download a fresh installation file ''to the desktop'' using IE8. 
#Then go to Add/Remove Programs, scroll down to "Mozilla Firefox" and remove it, choosing to keep your bookmarks, customizations etc., (''don't checkmark the box''). 
#Next, reboot and delete the folder called "Mozilla Firefox" at this location: C:\Program Files\Mozilla Firefox 
#Finally run the installation file you downloaded to the desktop earlier. 
Your bookmarks, customizations etc., are maintained in a different location and will become available to you again once you complete the installation.

What does firefox.exe-application error mean? Firefox wont even open it just says this, and then click okay to terminate the problem.

When I go to open up Firefox, it does not open no matter what I try It just pops up this box that says Firefox.exe - application error.
Then it says the Instruction at "0x798377a9" referenced memory at "0x798377a9". The memory could not be "written".
Click on OK to termintate the program
What does this mean? And why cant I use Firefox. I can still use internet explorer just fine.
== User Agent ==
Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; InfoPath.1)

Do a clean reinstall and download a fresh Firefox copy from http://www.mozilla.com/firefox/all.html and save the file to the desktop.
Uninstall your current Firefox version and remove the Firefox program folder before installing that copy of the Firefox installer.
It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
See http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

Whenever i open itunes after installation it says error 7 itunes was not installed correctly

whenever i open itunes after installation it says error 7 itunes was not installed correctly

For general advice see Troubleshooting issues with iTunes for Windows updates.
The section Install missing components may allow you to install Apple Application Support.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
If the advice above doesn't resolve things you could try this alternate version:
iTunes 12.1.0.71 for Windows (64-bit - for older video cards) - itunes64setup.exe (2015-01-28)
which is a 64-bit installer for the 32-bit version of the core application, similar to previous 64-bit releases.
Or roll back to the previous build:
iTunes 12.0.1.26 for Windows (32-bit) - iTunesSetup.exe (2014-10-16)
iTunes 12.0.1.26 for Windows (64-bit) - iTunes64Setup.exe (2014-10-16)
tt2

When I install the program, all go good but when i open the program, it say: iTunes was not installed correctly, Please reinstall Itunes, After i do this but the same

when I install the program, all go good but when i open the program, it say: iTunes was not installed correctly, Please reinstall Itunes Error 7 (windows 193), After i do this but the same

Howdy Allux345.
After multiple installations of iTunes it can be frustrating when the issue isnt resolved. I was able to locate the following knowledge base article that specifically addresses the "Error 7" you are recieving.
iTunes for Windows: "Error 7" message when opening iTunes
http://support.apple.com/kb/TS3074
The Resolution section has different steps depending on what version of the Windows Operating System you're using. Since it can be a bad installation of these Windows files, pay close attention to the instructions on repairing if the file already exhists.
Thanks for reaching out to Apple Support Communities with your question.
Cheers,
Pedro D.

Just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

just got a Nikon D610 and CS5 for Mac can't open the images -- message says installed version of camera raw doesn't support the camera. Downloaded the Raw 6.2 update for Mac, but installation failed. Now what?

The D610 didn't get out-of-the-box RAW support until Photoshop CC.
You can either upgrade to CC or use the DNG Converter to convert and open your DNGs in CS5.

Bought a book on itunes on my ipad, downloaded it on my macbook pro but I can't open it. It says "protected book" How can I read it?

I bought a book from iTunes on my iPad 2. I also downloaded it on my MacBook Pro (2011 17" model) . My book shows up there but I can't open it. It says "protected book" ? Any suggestions ?

As mentioned, Apple only makes their iBook reader app for thier mobile devices. And iBooks epub files are DRM locked to iBooks, so you cannot open it in anything but Apple's iBook reader on an iOS mobile device.

Can't open mail after installing update with 10.6.8 says my mail is out of date

Please help - new to Macs and I installed automatic update of 10.6.8 - 4 days ago and now I can't open up mail - it says "You can't use this version of Mail with this version of Mac OS X. You tried to open Mail version 4.5 (1084/1085) in Applications/ Mail.
So I went to Applications, says this message again. So I used my discs that came with the computer adn installed again Applications - no luck.
I had luckily backed up 2 days before this update - so went to Time Machine - did restore - now good still - can't open mail. CLick on Iconand get same messgae .
Please help. Thank you

rainbowmum wrote:
Thank you for the very clear basic instructions—helpful for a newbie.…Also my first screen shot !! I see that it does not have .App next to it
Most likely because you have Finder's preferences->Advanced->Show all filename extensions unchecked. Check it, log out, and back in and all the apps should display the .app extension.
Now, back to your problem. If you installed the Security Update 2012-004, it failed to update Mail to 4.6; thus, your problem. Manually DL it from http://support.apple.com/kb/DL1586 and reinstall it.

Can't open iphoto after complete reboot.

Hi!
My computer stoped working a while back and I had the harddrive replaced, now I can't open iphoto after importing it from time mashine. I still have the same OS X (10.6.8) on a Mac Book pro from 2009. I can't buy the new one, or update it, because my OS X is too old and after seeing all the problems with the new system I don't really want to install it. How do I make iphoto work again? When I try to open it, it just says it can't open because of a problem (no, really?).

Is there a crash report? Have you tried reinstalling it?
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2. Download it from the App Store to reinstall It's on your Purchases List* there.
For older versions that have been installed from Disk you'll need these additional steps:
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 or later they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
*Sometimes iPhoto is not visible on the Purchases List. it may be hidden. See this article for details on how to unhide it.
http://support.apple.com/kb/HT4928
One question often asked: Will I lose my Photos if I reinstall?
iPhoto the application and the iPhoto Library are two different parts of the iPhoto programme. So, reinstalling the app should not affect the Library. BUT you should always have a back up before doing this kind of work. Always.

Can't open Pages after upgrading to snow leopard on 10.6.8

Can't open Pages after upgrading to snow leopard on 10.6.8

Has Spotlight finished its indexing? Check in the upper right. If you get just the search field, it has, if it says its indexing, you have to wait before you can use anything.

I can't open itunes after installation, says"itunes.exe-application error"

Similar Messages

Maybe you are looking for