I can't open iTunes and I can't delete. I get error--43
iTunes 10.5. 2 will not run. Message comes up looking for quicktime version 7.5.5. I am running ver. 7.7.
Hi, I'm new here, hope not doing anything wrong.
So what I usually do when I get those corrupted programs on windows I use ccleaner.
You can find it here: http://www.filehippo.com/download_ccleaner/
http://www.filehippo.com/download_ccleaner/download/b097166f338b4c320427a27e5acb 7655/
Hope it works for you.
Similar Messages
-
Can't open iTunes and Mail after installing Yosemite
Hi, I intsalled Yosemite and after the Installation i can't open iTunes and Mail anymore, how can i fix this ?
Long shot.
Go to Finder and select your user/home folder. With that Finder window as the front window, either select Finder/View/Show View options or go command - J. When the View options opens, check ’Show Library Folder’. That should make your user library folder visible in your user/home folder. Go to Library/Containers/com.apple.mail. Move the folder com.apple.mail to your desktop. You must move the entire folder, not just the contents.
Restart, re-launch Mail and test. If the problem is solved, recreate any required Mail settings and import any emails you want to save from the folder on the desktop. You can then put the folder in the Trash. If the problem remains, return the folder to where you got it replacing the one that is there.
Information learned from Linc Davis. Thanks to leonie for some information contained in this. -
"The file 'iTunes Library.itl' cannot be read because it was created by a newer version of iTunes." Updates were only offered by Apple when I'd open iTunes. Now I can't open iTunes. How can I access the newest iTunes as an update, not a new program?
this just started w/ me yesterday. I was running 10.5.3, and nothing changed - the message just appeard out of nowhere. I update to the latest iTunes 10.6 but the message is the same.
Sounds like probably some sort of Library file corruption.
The two options available in the message box are "Download" and "Quit". Download is useless because I'm already running the latest. Quit is pretty useless.
I was going to just create a new Library and re-import all my music. Of course, all my iPhone sync settings are going go have to be recreated. -
I can't open iTunes message says" can't read itunes library.itl because it was created with a newer version" thank you for any help!
My ipod did that all day yesterday then went into lockdown ! now the dam thing wont do anything !!!! its stuck in download mode!!!!!!!!!
-
I upgraded my MacBook Pro with Lion (but with iphoto 9.2.1) to Maverick and now I can't open iphoto and I can't update either - can anyone help please?
Download the iPhoto upgrade from the App Store. It should be free.
iWork and iLife for Mac come free with every new Mac purchase. Existing users running Mavericks can update their apps for free from the Mac App Store℠. iWork and iLife for iOS are available for free from the App Store℠ for any new device running iOS 7, and are also available as free updates for existing users. GarageBand for Mac and iOS are free for all OS X Mavericks and iOS 7 users. Additional GarageBand instruments and sounds are available for a one-time in-app purchase of $4.99 for each platform. -
I Upgraded my iPad mini with retina screen 16 GB to iOS 8. I'm facing weird issues..i can't open iTunes , itunes store and can't upgrade app which I have downloaded..furthermore my iPad became slow..I don't understand what to do...please help me
Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario -
I can't open iTunes and I cannot uninstall it. What do I do?
I have a windows 7 PC and it says that windows installer isn't working properly when I try to uninstall and reinstall iTunes, and that is waht it is telling me to do when I open iTunes. See i tried updating iTunes earliar and it said that an error occured, then I tried re opening iTunes and it will not let me!!! This is driving me crazy, apple doesn't seem like they're much help. I've been working on this for hours, i've even tried system recovery.
Hi, I'm new here, hope not doing anything wrong.
So what I usually do when I get those corrupted programs on windows I use ccleaner.
You can find it here: http://www.filehippo.com/download_ccleaner/
http://www.filehippo.com/download_ccleaner/download/b097166f338b4c320427a27e5acb 7655/
Hope it works for you. -
Can't open itunes and tried almost everything
Hi there,
I have the same problem as Chileen, already reinstalled itunes, quicktime and also installed ewido. i still can't open it and now get that error: Offset: 0007391.... don't know at all what this means...
Windows XPTry this:
click start, click run
type "msconfig"
click run
click the startup tab (last on the right)
click "disable all"
click apple
click close
restart computer
try to open iTunes
Sounds like you have some security software on your compute that is causing interference with iTunes. The steps mentioned above prevents software from opening automatically and running in the background while you have Windows running. When your computer restarts, you will not have any other software running, and iTunes should not have any problems opening.
If iTunes works, make sure you go back and run MSCONFIG and disable 2 or 3 items at a time in the startup tab until you are able to pinpoint what exactly is causing iTunes to not launch. -
I can't open iTunes and iPhoto. What can I do?
When I try to open them a window says that there are some problems so I can't open them and I should try later. I haven't opened them for 2 months! What can I do to solve these problems?
Hi, I'm new here, hope not doing anything wrong.
So what I usually do when I get those corrupted programs on windows I use ccleaner.
You can find it here: http://www.filehippo.com/download_ccleaner/
http://www.filehippo.com/download_ccleaner/download/b097166f338b4c320427a27e5acb 7655/
Hope it works for you. -
After downloading the update package and trying to install it, the installation didn't work with error code 2324, and i can't open itunes on my laptop anymore?
First of, what sort of system have you got. (Right-click My Computer in the start Menu and select properties) There are two flavours of Windows 7 x64 OEM (original equipment manufacture) One is a total x64 system for the OS and all programs. The other runs x64 address space for the OS and x32 address space for programs. I had exactly the same problem with my system and microsoft office. Roll back (using the recovery console to rewrite all the original registry values before you upgraded will give you a clean system for the upgrade). The upgrade itself should recognise the correct upgrade version for you automatically. However, sometimes it fails to do this due to data corruption. Go here- http://www.apple.com/itunes/download/ and manually download what you need. after download Right-click the file and select "properties" and click on "unblock" box in lower right corner. close, Then right click the file again and select "Run as administrator". If u still have problems, reboot into Safe mode. Uninstall itunes. Reboot again to safe mode. Disconnect from internet and disable any 3rd party system watch and antivirus programs. Reinstall itunes, then reboot normally. If the problem still persists run a system diagnostic check using "Problem Reports and Solutions" from in Control Panel. Let me know how you get on.
-
Can't open iTunes and Audio doesn't work
Hi! I need help!
Everytime I try to open iTunes I get an Error message that says:
"The iTunes application could not be opened. An unknown error occured (-200)."
And once I started getting this error my audio stopped working. All my macbook pro does audio wise is play sound effects of what I do (move things to trash, delete things...etc.).
Anyone know what's going on here and what I can do to fix this problem?Your iTunes issue should be posted to the iTunes forum area.
For your sound problems - Repair permissions & restart.
http://docs.info.apple.com/article.html?artnum=300832
Open up GarageBand if installed then, open a program (optional). Quit out of the GarageBand app. -
Can't open itunes and already reinstalled it
i cannot open itunes
i have already reinstalled it about three times
I click on the icon and it shows the little clock then it goes away and nothing happens
can someboy please help me with this
thankshiya!
No there are no error messages on it and i already ran a nortan antivirus scan
okay, if you've got Norton Internet Security 2005 on that PC, that might be what is causing your problem here.
if you've got NIS 2005, let's try giving the trusty Lorraine M technique a whirl:
Lorraine M: NIS/itunes problem rectified
love, b -
Can't open itunes and downlaod latest version.
I did get a suggestion from....sagarpachorkar, Thanks , but I could not download the lates version of iTunes and I think because I have an old version I could not download. So I have all my songs saved I think so I will delete iTunes and than download the lastes version. My question is when I hook up my ipod will the songs that are already on it be OK? Many Thanks for all the help I hope I get, Cheers Upthefloor24
Upthefloor24 wrote:
the old version is still on my computer and I can't delete it
Use this Apple document as a guide, for removing iTunes and the other Apple software -> Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
Some people have had success using the Windows Installer Cleanup utility to remove applications that can't be uninstalled. -
I purchased moves from my ipad through itunes. They downloaded and I synched them to my computer. I cannot find them on my ipad. I open itunes click on Movies and it takes me to the movie library to purchase more movies. Where did my purchased movies go on my ipad?
They should have downloaded into the Videos app (iTunes on the iPad is just the iTunes store) :
If they aren't in there then have you got a film age rating set in Settings > General > Restrictions that is hiding them ? -
I can't open itunes and I'm losing faith... please help
Each time I try to run itunes I receive an error message reading "The instruction at "0x6b636975" referenced memory at "0x6b636975". The memory could not be "read"."
There are also several Asian (I think) characters in the pop up dialog box. I googled it, and only sites with the similar Asian script appear. I've also tried methods recommended for other error messages, but nothing has worked. Please help, before I give up on itunes forever!
Thanks.Thanks for the assistance. I do believe the problem is with Quicktime. I tried to install quicktime stand alone, and when I tried to open it, it didn't do anyting. No error message, nothing. When I try to uninstall it, it "encounters" a problem, unless I first delete the program file, then run the uninstall.
okay, perhaps let's try the following method for swapping out your QuickTime:
Download and install the Windows Installer CleanUp utility. then use it to clear any existing QuickTime installation configuration information from your PC:
Description of the Windows Installer CleanUp Utility
Next, we’ll manually remove leftover program files and folders.
1. On the Start menu, click My Computer (or double-click My Computer on the Desktop).
2. In My Computer, open Local Disk.
3. Open Program Files.
4. Right-click on the QuickTime folder and click Delete from the shortcut menu.
5. Navigate to C:\Windows\system32\.
6. Remove the files QuickTime.qts and QuicktimeVR.qtx.
7. Restart your computer.
next, we'll try to get a fresh copy of QuickTime into your PC by doing a repair install of itunes.
switch off antivirus and antispyware applications prior to the repair install.
go into Add/Remove and select itunes. click "Change" and then click "Repair".
if the repair install goes through okay, restart the PC and try launching itunes again. does it launch properly now?
Maybe you are looking for
-
For modelsim simulation: vsim -t 1ps -lib xil_defaultlib tb_dut So modelsim.ini doesn't have effect. Don't see any GUI option neither. Thanks,
-
When I updated to firefox 4 it did not bring my bookmarks with it. Can I recover them?
When I updated to Firefox 4 my bookmarks all disappeared. Can I recover them? Also, tweetdeck did not sync up to the new firefox, and won't let me open links in tweets.
-
How to turn OpenGL for PS CS4 in Windows 7 ?
Does anyone know how to permanently turn off Open GL for PS CS 4 in Windows 7 ? I am trying so called "plugins" available here http://www.adobe.com/support/downloads/detail.jsp?ftpID=4056 which essentially are registry entries - however after running
-
New macbook air can't detect huawei 353
I had bought recently these two USB Dongles (Huawei 353 and 357 models) of Smartbro of Smart Telecom Philippines and Globe Tattoo of Globe Telecom Philippines... these two recently was active and functional when I was using it in my old MacBook Air 4
-
UVerse Support Call Running Diary
So after about 2 years of having no real issues other than an occasional reset of my gateway, an installer rewired my entire house a couple months ago. He removed all the coaxial wiring and switched everything over to ethernet (cool with me). He al