I can't open multiple pages anymore like I used to be able to.

I used to be able to click on the x to the right of the web page name to open a second window so I could have two or more sites open simultaneously to flip back and forth. Now I can't do that. The system will open a second page on its own from time to time--like asking this question--but I can't do it myself.

Thanks for your response, disconcerting though it may be.
I guess I'll have to look at other platforms.

Similar Messages

  • I can't print multiple pages from a website using the site's print button or 'file - print' and if I try to save as a PDF, it still only saves the first page and then cuts off.

    I'm using Mac OS X 10.5.8 and Firefox version 3.6.8. When I'm on a website and try to print the info on the site, whether I use the site's own 'print' option, or I go to the Firefox toolbar and try to use 'File->Print', only 1 page prints out - it just cuts off mid-page. If I try to save as a PDF instead, the same thing happens in exactly the same spot - it saves as a 1-page PDF and cuts off in the middle of the page. I've already tried all of the suggestions here https://support.mozilla.com/en-US/kb/Printing+a+web+page?s=printing&as=s and the suggestions here http://kb.mozillazine.org/Problems_printing_web_pages and nothing has worked.
    I appreciate any help!!

    I have the same problem... not being able to print website 'Print' pages. I have read carefully the above link and have followed the reset directions in about:config, but I still cannot print in Firefox. Both Google Chrome and IE work perfectly every time. I have verified that the correct printer is selected and that the margins are in order (0.5 all around happen to be what mine are set for). I have resorted to use the Firefox Add On "View this Page in IE" whenever I need to print something. Works like a charm, but come on... it should work in Firefox too! I know there is some setting or something, but the Problems_printing_web_pages link had nothing there that worked for me.

  • How can I combine multiple Pages documents into one using iPad?

    Hello all,
    I have created a magazine with my students using pages. The problem is that each article is a separate documents. Now I have to put them all together. How can I do that, using iPad? Is it even possible?
    Thank you

    copy paste is the only way to do it on a pad - document by document.

  • Even though I have Adobe Reader, I can't open my bank stmts. like I used to. What am I doing wrong??

    I have been opening my bankstatements online for a long, long, time.  All of a sudden, I can't get them to open.  All I get is a blank screen with a tiny "x" in the upper left-hand corner.  I'm pretty new to computers, so this may be a stupid question, but what am I doing wrong??

    I am using Windows 7, IE XI (?), and Adobe reader XI.  However, just to let you know, the problem has been solved almost by accident.  I happened to mention the problem to a friend who had had a similar problem and been told to us a different browser.  She did and her problem was solved.  I switched to Google Chrome, and my problem seems to be gone as well.  Thanks for your time.

  • Can not open some pages on safari like google or facebook

    i can not open some pages on safari, like google or facebook have to turn off a try again then sometimes works

    Select  ▹ System Preferences ▹ Network ▹ Advanced ▹ TCP/IP ▹ Configure IPv6: Off. Apply the change and test. You must apply the change before it takes effect.

  • How can I scan multiple pages to one file with MG 7120

    My printer does not have ADF. How can I scan multiple pages to one file on my MG 7120?

    Hi albabynyr,
    There is a program that comes with the printer called the IJ Scan Utility that can assist you with scanning multiple pages into a single file.  To scan using the IJ Scan Utility, please follow these steps:
    1. Start IJ Scan Utility by going to your Start menu, then selecting All Programs, then Canon Utilities, then  IJ Scan Utility (folder), then IJ Scan Utility (program).
    2. In the Canon IJ Scan Utility window that opens, click SETTINGS.... in the bottom right of the window. The Settings dialog box appears.
    3. Click the DOCUMENT SCAN option on the left pane of the window.
    4. In the right pane of the window, locate the SELECT SOURCE field and select the DOCUMENT option.
    5. Set the color mode, document size, and scanning resolution as required in the rest of the fields shown in the window. Click DOCUMENT SCAN ORIENTATION SETTINGS... to specify the orientation of the documents to be scanned.
    6. In the SAVE SETTINGS section of the window, you will select the save format and location of the document you are about to scan.
    a.) In the FILE NAME field, specify the name you would like to give the file. By default the filename will begin with IMG; you can remove IMG and change it to whatever you would like to name the file.
    b.) In the DATA FORMAT field, use the drop-down arrow to select the PDF (Multiple Pages) option.
    c.) In the SAVE IN field, please navigate to the area where you would like the file to be saved once it is scanned in. By default, the file will be saved in the DOCUMENTS folder.
    7. Once all settings have been selected, click the OK button at the bottom of the SETTINGS (DOCUMENT SCAN) window. The IJ Scan Utility main screen appears.
    8. Click the DOCUMENT button. Scanning starts. After a page has scanned, the screen to continue or end scanning appears. If you have more pages to scan, place the next page on the platen and click Scan.  Do this each time a page has completed scanning.  After the last page has been scanned, click Exit. Scanned images are saved in previously selected folder location specified in the SETTINGS... window. Click the CANCEL button to cancel scanning if needed during scanning.
    Hope this helps!
    This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
    Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

  • Can't open a page in safari

    Hi, I just tried getting rid of install mac? genio on my Mac Pro. and now I can't open a page in safari. it says safari can't open the page "google/co.uk" because the server where this page is located isn't responding.
    Can anyone help please?

    http://osxdaily.com/2014/12/30/re-download-os-x-mavericks-installer-from-os-x-yo semite-app-store/
    http://osxdaily.com/2014/10/18/clean-install-os-x-yosemite/
    http://liondiskmaker.com/
    Mountain Lion is the second release of OS X to be delivered via the Mac App Store. Like with Lion, users can create their own bootable USB key installer to use as a recovery disk or to install Mountain Lion on multiple Macs without needing to download the 4GB installer multiple times.
    Ars Technica has an excellent walk-through using either the Disk Utility application that is included on every Mac, or the newly updated Lion Diskmaker app that automates the process of creating a bootable install key.
    The biggest catch to the whole process is to make a copy of the Mountain Lion installer before actually installing Mountain Lion, otherwise the installer will need to be redownloaded from the Mac App Store.
    http://arstechnica.com/apple/2012/07/how-to-create-a-bootable-backup-mountain-li on-install-disk/
    How to make a perfect bootable backup - and I suggest doing so early on, and then as needed so you have a known clean good system and a copy of your working system - using Carbon Copy Cloner:
    http://bombich.com/

  • Can you opening multiple albums at the same time in Photo (not iPhoto)?

    When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
    I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?

    All of the events in iPhoto were converted to albums and are located in the Folder titled iPhoto Event in the sidebar of Photos. 
    You can't open multiple albums at the same time.  You can create a smart album that will do essentially the same thing with the following criteria:
    Album is "A"
    Album is "B".
    The smart album will display all of the photos in those two albums.

  • "Safari can't open the page because it can't find the server"

    I just bought my iPhone. The first time I attempted to log onto my home wireless network (US Robotics Wireless Router) the iPhone performed perfectly. However, the next time I attempted to logon and surf it gave me the "Safari can't open the page because it can't find the server" error message. I tried a variety of things which didn't work. I called the Apple Tech Support. Turning off the router and rebooting it was the only thing that worked. I thought my problem was resolved because after cycling the router the iPhone worked great once again. But . . . later the same day I attempted to connect to the router and the same thing happened and I got the error message. I attempted to power cycle the router just like before but this time it did not work! Help! Bad router? Wrong settings on router or iPhone?

    Do you have other wireless devices connected to this same router? Do they work?
    I really can't help you much but to say that when my router exhibited this issue it was accross the board (all notebooks would connect immediately following a router restart, but would loss connectivity until I rebooted the router again). In my case the only solution that was permanent was to replace the router.
    You may also try restarting the phone and the router, setup security - WEP - (or disable security) on the router and phone, and/or try a different wi-fi channel (may actually help).

  • Old Logic + a new Mac = can't open old projects anymore. De/re-install?

    Hi everybody,
    maybe someone can advise me with this problem:
    I bought a new Mac recently, did install a fresh OSX 10.5 and then used migration assistant to transfer my old user account from my old Mac (10.4), incl. all files. It did take a night, but it worked - or so I thought. Actually all applications work as they should, except for Logic. I had to re-authorize a few plug-ins, but then all seemed to be cool. I can open a new project, record audio, midi, add plug-ins, all cool. But I ended up with 3 problems, which are really annoying:
    1) EXS24 couldn't find most of the samples anymore. Most, not all. I have 4 internal HDs, one for the system, one for audio recordings, one for samples, one for "other stuff". 2 of these disks came from the old Mac, 2 new ones, content copied from old Mac. In the EXS prefs I set "search for samples" to "all volumes", but it still didn't work perfectly. Finally I bought EXSManager Pro and now it seems to work again. I didn't try ALL samples yet, but the +/- 20 EXS instruments I tried, did load all samples.
    2) Space Designer doesn't load impulse responses for the presets anymore. They're there and at the right place. I can load SD and import an existing impulse file, no problem. But the presets don't find the required files anymore.
    3) Now - and this is the worst one - I can't open old projects anymore. I just can't. It starts loading, I see the rainbow thing (don't know the right word), it turns black & white and that's it. You can watch this forever and nothing happens.
    Regarding all 3 issues:
    I don't get any error messages. Logic doesn't crash, I can't click 'apple-.' to stop loading/searching. It just doesn't open the file. I had a coffee, a pizza, I let it try for 2 hrs+, but neither did it load a SD preset or an old song file. All I can do is manually quit Logic.
    But when I open Logic with the CTRL-button down and click "no" to core audio I can open all songs. Of course I can not hear a tone then, but it's all there. Opening a song takes 3 secs then. I tried to safe a song then with a different name, re-started Logic with core audio but same result. It get's "stuck".
    Of course I checked user permissions and all the usual trouble shooting clicks, but still Logic has a mind of it's own. I installed a 2nd user with admin rights, though still the same, plus all the 3rd party plug-ins refusing to work.
    Now I was thinking, should I de-install Logic and re-install from the original CDs maybe. And if so, is there anything special I have to take care of? Like manually removing any prefs or cache files?
    Or completely re-install the whole Mac? (pleeease no....)...
    If anybody has any idea, it'd be highly appreciated.
    Thank you in advance and for the energy to read my little novel here,
    cheers,
    Joern

    Ok, either my question was too long or nobody seems to have an answer. Sad, either way
    Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
    When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
    Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
    Two questions, every idea would be great!
    - Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
    - Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
    Thank you again,
    Joern

  • How can i scan multiple pages in a single file in pdf.

    How can i scan multiple pages in a single file in pdf using 1536 dnf.

    Hi @veerendrajain ,
    I see that you would like to save multiple PDF documents into one file. I would like to help you out today.
    In the HP Scan Software, select Advanced scan settings, click on the File tab and uncheck Create a separate file for each scanned image.
    Hope this helps.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Can you open with Pages documents that were created in a 2004 version of Microsoft word for Mac?

    Can you open in Pages documents that were created in a 2004 version of Microsoft Word for Mac?

    Pages '09 will open .doc files from Word 2004. The Mac OS is not what is in question. Pages '09 opens Word 2004 documents and if the same version of Pages will run in Lion and in Mountain Lion ..... Thats all that matters.
    I trust you were using MS Office 2004 and would now like to buy Pages?

  • I can't open a pages document.

    I can't open a pages document. It says I need a new version of pages. I searched for upgrades but can't find any. Am I being forced to re-buy the program in order to access my documents? I looked into upgrading operating system, but Mavericks says I can't - my machine is too old? Seriously? It is starting to look like upgrades are breaking what otherwise worked fine, then charging to upgrade to make it work?

    Pages 5 requires Mavericks.
    If you can't upgrade to Mavericks you will need to Export your Pages 5 file to Pages '09 or Word .doc/x format then open it with whatever Pages version you have (you didn't say).
    You can open Pages 5 files inside Safari using iWork for iCloud beta and Send a Copy in Word format to yourself.
    Peter

  • How can I copy multiple pages in a spreadsheet

    There seems to be a bug in one of my Numbers spreadsheets (it has repeatedly caused Numbers to crash, even after restart), so I'd like to create a new spreadsheet. How can I copy multiple pages in a spreadsheet?

    Hi @veerendrajain ,
    I see that you would like to save multiple PDF documents into one file. I would like to help you out today.
    In the HP Scan Software, select Advanced scan settings, click on the File tab and uncheck Create a separate file for each scanned image.
    Hope this helps.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • How do I configure Firefox to open multiple pages on startup and not set my homepage to open mutliple tabs?

    So I know how to set my homepage to open multiple tabs, however it has the undesired effect of making it so those tabs are opened every time I hit the homepage button. Is there a way to set Firefox to open multiple pages on start-up, while not actually setting the homepage to open multiple tabs?

    You can edit a copy of the Firefox desktop shortcut and add the links to the target field to make Firefox open those pages when you use this shortcut.
    See:
    *https://developer.mozilla.org/Command_Line_Options
    If you run out of space (i.e. exceed the maximum length) then use a CMD file with the start command.
    *start "" "<path_to_firefox\firefox.exe>" URL1 URL2
    *https://technet.microsoft.com/en-us/library/bb491005.aspx

Maybe you are looking for