I can't open my extrnal hard

Hi all!,:D
When i'm going to open my extranal hard(with :USB 2 or eSATA)
An error occurred while accessing 'baba', the system responded: The requested operation has failed.: Error mounting: mount exited with exit code 13: Incomplete multi-sector transfer: magic: 0x454c4946 size: 1024 usa_ofs: 48 usa_count: 0 data: 568 usn: 569: Input/output error
$MFT error: Incomplete multi sector transfer detected in '$Volume'.
Failed to mount '/dev/sdc1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.

Mount answer:
Incomplete multi-sector transfer: magic: 0x454c4946 size: 1024 usa_ofs: 48 usa_count: 0 data: 568 usn: 569: Input/output error
$MFT error: Incomplete multi sector transfer detected in '$Volume'.
Failed to mount '/dev/sdb1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.

Similar Messages

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

Can't open file on external hard drive?

Hi,
I'm using an external hard drive for mac backup and also to store photo files. I copied some photo files to the drive about two weeks ago and their icon appears, but when I want to open them, I get an error message: "The alias “...” can’t be opened because the original item can’t be found." There is also a small arrow on the icon. My other files can be opened okay.
What's also strange is that I found the icon of the external drive in the folder with the picture files, even though I did not drag it there (the main icon is till on my computer's desktop, where it should be.) That icon also has a small arrow on it. When I click on it, it opens and I can see my folders, but the photo folders with the arrow on it will still not open.
I tried ejecting the drive and reconnecting it, but it didn't help. Is there anything I can do to recover the missing photo files, or are they most likely gone? I have deleted these pictures from my computer hard drive. What should I do about the mysterious second external drive icon? Delete it or keep it? Can I somehow use it to restore the photo files?
Any help appreciated! Thanks!

The Hard Drive is a :
Toshiba Canvio® Connect 1TB Portable Hard Drive (Silver)
Model: HDTC710XS3A1
This one: http://www.staples.com/office/supplies/StaplesProductDisplay?langId=-1&storeId=1 0001&krypto=3zEkJ%2BPHCwJUtrlzjGByIaVT405Hn%2BOkggwamseD1O2Y0FHbJ9AUp%2FvPow7k22 XRWnJ6JpaVN8kRgl1%2FsFLgpeXF3MELtwm2GBihw8f7efXGqDPuH1gOcMRylnlmBw9gsk%2BTp1l7y9 CIe9KKQs5NR6dOV3HVJyJoGFWpJuhiI4ebeznLAndHONOpAQH7BG04MKAdFPnSHdRzYEBcRoM%2FVHQM k2PSq4vj%2F684ZdSvLVCllSq4ffM7sqpFRf0VO825mlCiumRBMCpX4RLzBCDAjoVpsvSrfRAuJkk4ZW NwBP3Qfzok8RiYCyj3rmcmGc1iFsFS6dhKjH9xnnhEkb5%2Bag%3D%3D
I copied the photos by dragging and dropping them into the folder on the external drive. I highlighted them all and dragged them together, then clicked "Arrange by Name", so I would find them. As the folders were visible, I assumed they were copied correctly, however I'm not sure I actually opened one to make sure.
Other than the photo folder I have the hard drive connected to Time Machine and it automatically backs up files. I still have about 700MB of space left on the drive.
I used my Mac (disk utility) to format the drive, not the software that came with it, as someone on this forum recommended. Format is: Mac OS Extended (Journaled). So far, it had been working great.
Just looked at Disk Utility and it's strange, it's as if the Toshiba drive appears twice, with its original name and then the way I renamed it "Mac Backup". Not sure if that's normal? When I click on Mac Backup it correctly states how much storage I have left, but it lists over 230,000 folders and over 1.3 million files, which seems way too much, even considering the regular backups.

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

I can't open images or videos on my external hard drive

hello everyone, I've been having this problem for a while now and its only with images and videos .
when i try to open any picture or video this msg comes up "The file couldn’t be opened because there is no such file"
and i can only open it if i copied the file from my hard drive to my computer .
when i open the info for the same picture (one in on the hard drive and one my computer) the one on the hard drive has nothing under "more info"
while the one on my computer has a lot of details under "more info" .
plz i really need someone to help me

only with images and videos.
yes its the "More Info" section of a finder Get Info window.
this is the Get Info window for the drive itself
its WD external drive 320 GB
this is the Get Info windows of one of the pictures
thank you so much . i will try both smc and pram reset and i'll let you know what happend.

I've been getting the error message "The disk you inserted was not readable by the computer". I can't open system preferences, disk utility, or Time Machine. I'm guessing it has something to do with my external hard drive, although it hasn't been touched.

I've been getting the error message "The disk you inserted was not readable by the computer". I can't open system preferences, disk utility, or Time Machine. I'm guessing it has something to do with my external hard drive, although it hasn't been touched lately, but I can't figure out how to solve the problem. Any suggestions? Thank you!

Thanks for your quick response. I had a look at your discussion... I tried it on a Windows machine and I thought that was compatible with ExFAT?
Therefore I need to attempt to use my external hard drive with a machine that boasts OS X 10.6.5 or above and then it should work?
Thanks

Can't open iphoto library from external hard drive

I'm backing up my enormous iPhoto library to two external hard drives in order to free up space on my computer. Before deleting the photos permanently from the laptop, I wanted to double-check that the copies of the library I made on the two externals would actually work on another computer, should something happen to my laptop. When I plug my external hard drive into my laptop and use option+click on iPhoto to choose which library I want to use, it opens up the library from the external just fine, no problems. However, when I plug the same external into a different Mac computer and do the same process, I get the immensely frustrating message of "You can't open photo library blah blah blah changes have been made using newer version of iPhoto". However, both my laptop and the second computer are running the exact same version of iPhoto (the most recent), so that can't (or at least shouldn't) be the problem. I found suggestions to rebuild the library, which I did, but the same result occurs. I double-checked to be sure that neither computer needed updates (they didn't).
When I plug one of the externals into the second computer, though, I can open up the package contents of iPhoto library and all the photos are visible, so I know the information is all there. But I don't want to lose my albums, etc.
So do I just delete the copies of my library from the externals and try it all over again? I'd prefer not to, since I have 40,000+ photos, and that takes a while.

To reinforce what Larry pointed out both Macs must be running the same version of iPhoto. And the external HD must be formatted as shown in this screenshot:
and don't forget the ignore ownership.
OT

Hard drive died. Wrote back-up image to new drive, but can't open Adobe. Help, please.

I own Adobe Acrobat 9 Professional. This software can be installed on two computers.
The hard drive in one of my two computers died. Fortunately, I've been doing full-image back-ups (which include the operating system) to an external hard drive. I copied the most recent image (a few hours old) onto the new hard drive.
I can't open Adobe Acrobat 9 Professional from new hard drive. It's telling me that I already have installed it twice and that I'm requesting a third installation which isn't permitted.
How do I get a usable copy Adobe Acrobat 9 Professional on the new hard drive?
Do I perform a Windows Control Panel "Delete" on the program and re-install it from scratch?
Or, is there another procedure?
OR, am I SOL?
Thank you,
Julie

You don't mention the backup software you use, but it would SEEM that it is missing the "hidden" registration files on your hard drive
I use multiple boot drives, via drive swap hardware, making and restoring backups each time I test new software... really easy to go back to "before install" by swapping a drive or restoring a backup... described at http://www.pacifier.com/~jtsmith/ADOBE.HTM
The backup software I use is at http://www.terabyteunlimited.com/image-for-linux.htm - the program includes a "makedisk" routine to make a bootable CD, so the software runs on Linux, completely outside Windoze, and goes direct to the hardware controller, not through the Windoze drivers
This creates a COMPLETE image to an external USB hard drive, and the restore works with all registration information intact

I've backup my iPhoto on WD My Passport. When I try to pull up the photos from the external hard drive onto a different computer, it says "You can't open your current photo library using this version of iPhoto." It says I have to use a later version.

After backing up my photos on a My Passport hard drive I can't open iphoto from the hard drive. It says "You can't open your current photo library using this version of iphoto. You have made changes to your photo library using a newer version of iphoto. Please quit and use the latest version of iphoto." I have done all the upgrades for iphoto. Anyone know what I'm doing wrong?

What versions of iPhoto and OS X are on each computer? You can find out by going to your iPhoto application (from the Applications folder), clicking it once to highlight it, and click cmd-i to open its information window. The version number is in the General tab.
Your version of OS X can be found from the Apple menu, then About This Mac.
The latest version of iPhoto (9.5.1) requires OS X 10.9, so if you have an older version of OS X on that computer, you will have to upgrade to Mavericks and then upgrade to the newer iPhoto.
Matt

Hello, I can see the Icon of my external hard on the mac os x 10.6.8 but I can not open it or view any file in the external hard

hello, I can see the Icon of my external hard on the mac os x 10.6.8 but I can not open it or view any file in the external hard
your prompt reply will be appreciated
thanks

Reinstall 10.6 again, but this time hold c boot off the 10.6 and erase the ENTIRE internal drive.
You do this by selecting the drive makers name and size on the left hand side, not the slightly indented partition underneath it.
If you erase and install 10.6 only into a parittion, say Macintosh HD, the you still have the hidden Lion Recovery Partition on the drive and it appears you already have 10.7
In the MAS, hold option and click Purchases to redownload Lion
FYI, you don't need to install 10.6 to reinstall 10.7, 10.7 can be reinstalled via the Lion Recovery, Command r boot.
See this for more info
https://discussions.apple.com/docs/DOC-3046

I have Adobe Acrobat 8 Standard and I had to reload it on my computer due to my hard drive crashing. Now I can only open and view PDF's and I cannot edit them as I could before such as using Tools Comment

I have Adobe Acrobat 8 Standard and I had to reload it on my computer due to my hard drive crashing. Now I can only open and view PDF’s and I cannot edit them as I could before such as using Tools>Comment&Markup or Tools>Advanced Editing>TouchUp Text Tool. All the functions are greyed out. Please advise.

What's your OS? Acrobat 8 is not compatible with any modern OS.
On Thu, Jan 15, 2015 at 4:16 PM, thomasc1234 <[email protected]>

HT5958 After i updated my terabyte, when i open fcpx 10.1 my hard drive never appears, so i can't open a new library for a new project. What should i do?

After i updated my terabyte, when i open fcpx 10.1 my hard drive never appears, so i can't open a new library for a new project. What should i do?

Hard drives do not appear in the application. Use File>New Library.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

My Hard Disk setting has been changed into no access for everyone and i can't open my mac. please tell me how can i login as an admin to change the setting cause i have a lot of date in my hard drive.

Read and follow Apple Support Communities contributor Niel's User Tip: kmosx: I accidentally set a disk's permissions to No Access

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

I installed a new hard drive and trying to reinstall FCP2 and on the install disc i get the following message - "You can't open the application FC Studio.mpkg because power PC applications are no longer supported"

Because you are running lion.. FCS 6 is a Power PC app and Lion doesn't support Power PC anymore.. So you can't install it.. Three options..
1. Revert back to Snow Leopard.
2. Purchase FCP X...
if you can't stand FCP X
3. Call apple directly, 1800-MYAPPLE and ask to purachse FCS 3 for $999... (its FCP 7)
I just got FCS 3 today through apple phone sales..

Had a new hard drive installed last month. now iphoto won't start up, popup says "you can't open the application iphoto because it may be damaged or incomplete. can this be repaired without going to the repair shop?

had a new hard drive installed last month. now iphoto won't start up, popup says "you can't open the application iphoto because it may be damaged or incomplete". can this be repaired without going to the repair shop?

What installed iPhoto there in the first place? Was it the same version of iPhoto that came with the Mac? Was iLife added at a later time from a Mac Box Set? You can selectively install iPhoto, and then apply the appropriate iLife update without taking it to the shop, after removing the application, or recover it from your backup.

I can't open my extrnal hard

Similar Messages

Maybe you are looking for