I can't open my Muse CC Web Site

How do I set a start page in my adobe muse website

You start by asking in the Muse forum
This forum is actually about the Cloud, not about using individual programs
Once your program downloads and installs with no errors, you need the program forum
If you start at the Forums Index http://forums.adobe.com/index.jspa
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says ALL FORUMS) to open the drop down list and scroll
http://forums.adobe.com/community/muse

Similar Messages

I can't open pdf's from web sites since I upgraded adobe reader

Since I upgraded adobe, I haven't been able to open pdf's directly from websites--I just get a black screen (in Safari, or a white screen in Firefox). I can sometimes right click on the link and either download the pdf or save it as a document as a work-around to enable me to open it.

I have the same problem. Or similar. A few weeks ago, i installed Adobe reader (because i had a pdf attachment that was unreadable in Preview, so i wanted to try Adobe to see if that would work; it didn't work). Since then, i can't open PDF files on the web. I get a black screen or sometimes a white one. and i can sometimes open them indirectly, if there is the option on the link. I thought this problem started after i deleted Adobe however. I'm not sure because i wasn't expecting this problem and am not exactly sure the sequence of when things happened, but i wanted to delete Adobe reader because i had no use for it. Unfortunately, they didn't provide an uninstaller. I put the application in the trash and whatever else was in the folder, and emptied the trash, but got a lot of messages about various files not being able to be deleted because they were in use. I think it was since then that i can't open PDF files. Never had a problem before getting involved with Adobe Reader. Anyway, as far as your answer goes, i have already deleted as much of it as i can.
Any other suggestions? i downloaded the Adobe installer to reinstall it if that's what it takes. i need to be able to open PDF files.
Thanks

Can't open Service Credit Union Web Site

When I go to www.service cu.org, I get the following message: Please upgrade your browser
Your browser is unable to perform strong encryption. For your protection, we require 128 bit encryption in order to secure your banking session.
Please upgrade your browser to Internet Explorer 5.5+ or Netscape Navigator 4.73+
With Safari 2.0 I had no ploblems. Also when I try to watch the NBC Nightly News podcast it doesn't play I get a message that the browser is not compatible. But when I hit the back button the video plays. This all happens since I upgraded to Safari 3.0. Help

I'm having the same problem with service credit union. Is there something I can set up in Safari to get the website to work?

Can I launch more than 5 web-sites using Muse? how?

Hi,
Can I launch more than 5 web-sites using Muse? how?

You can use Muse to design and build as many websites as you wish; just purchase the URL's and hosting as appropriate. Your subscription to Muse allows for unlimited authoring.
Now, if you're referring to support via Business Catalyst, that's a different story...

Firefox opens and shows the web site but is shifted over to the left so only half is visible. IE8 is fine

Firefox opens and loads the web site, but it has a blank 3 inch border down the whole of the right hand side, Firefox is moved over to the left so that i can only see half of it. The red cross to close it down is still at the very top right hand corner!
== This happened ==
Every time Firefox opened
== Earlier this week.

Reset the page zoom on pages that cause problems: '''View > Zoom > Reset''' (Ctrl+0 (zero); Cmd+0 on Mac)
See [[Text Zoom]] and [[Page Zoom]] and http://kb.mozillazine.org/Zoom_text_of_web_pages

My iphone 4 cannot open the flash based web sites. Is there no tie up with Flash???

my iphone 4 cannot open the flash based web sites. Is there no tie up with Flash???

Actually, read this. http://www.apple.com/hotnews/thoughts-on-flash/

When I open some pages, another web site opens. I want to block that site and its URL from opening.

When I open some pages, another web site opens. I want to block that site and its URL from opening.

BlockSite extension.
https://addons.mozilla.org/firefox/3145/

My iphone is locked how i can know with which id i can unlock it .tell me any web site where i put some information and that tell me with which id i can unlock it?

my iphone is locked how i can know with which id i can unlock it .tell me any web site where i put some information and that tell me with which id i can unlock it?

http://support.apple.com/kb/PH13695

Error Codes and Now I can't Open my Muse File-HELP!

Hello-
I've been building my site for four weeks now. I keep my muse file and all my photos etc. on an external hard drive. It's all been going well until I try to open my site/Muse file and it says error code 36 and error code 43. It says some data is missing or requried items can't be found. I have no idea what happened. I uploaded my site to the FTP last night. Then I closed down Muse and shut down my Mac. Today when I tried to access my Muse file it's won't open. I am frightened I've lost all my work and my business web site.
Any help or advice would be much appricated!
Thanks-
JAK

Reinstall - Discussions of RE-installing
-http://forums.adobe.com/thread/1408331?tstart=0
-http://forums.adobe.com/thread/1398961?tstart=0
-and http://helpx.adobe.com/creative-cloud/help/install-apps.html
-using the cleaner after uninstalling and before reinstalling will usually help
-http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
Asking in Flash Professional may also give more help
This forum is about the Cloud as a delivery process, not about using individual programs
If you start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

When I try to open safari on my laptop, it says safari can't open page. A web proxy issue. What do I do?, When I try to open safari on my laptop, it says safari can't open page. A web proxy issue. What do I do?

Solstas Lab PartnersWI-HEM-052
Title: Urinalysis Quality Control
1.0 Purpose:
The purpose of this work instruction is to define the procedure for performing Urinalysis Quality Control.
2.0 Scope:
This work instruction covers the Laboratory personnel in the Hematology Department.
3.0 Definitions:
3.1 ml = Milliliter
3.2 RPM = Revolutions per Minute
3.3 C = Centigrade
3.4 UA = Urinalysis
4.0 Procedures:
4.1 Principle
MAS Liquid Urinalysis Control is intended for use in the clinical laboratory as a urine control for qualitative urinalysis procedures and microscopic sediment analysis.
4.2 Reagents and Equipment
4.2.1 MAS Liquid Urinalysis Control Level 1
4.2.2 MAS Liquid Urinalysis Control Level 3
4.2.3 Centrifuge
4.2.4 Urine centrifuge tubes
4.2.5 Urinalysis Reagent Strips
4.2.6 Icto test tablets and mats
4.2.7 Clinitest tablets
4.2.8 16x100 test tubes
4.2.9 pipettes or Kova petters
4.2.10 glass slide and coverslip or Kova slide
4.2.11 Microscope
4.3 Frequency
The controls for instrument urinalysis and microscopic analysis should be run once each day of testing in the morning, and again every 8 hours.
4.4 Procedural Steps
4.4.1 Compare the lot number printed on the MAS Liquid UA Control insert in the package with the lot number of the appropriate bottle of MAS control; they should match.
4.4.2 Thoroughly mix the contents of the vial before each use by gently inverting the vial several times.
4.4.3 After labeling a clean centrifuge tube for the control to be tested, open the vial and pour 12ml of the appropriate MAS control into it. Allow the control in the tube to equilibrate to room temperature and test in the same manner as an unknown specimen; follow the directions for using the Urisys 2400 (see Urinalysis procedure), refractometer, clinitest tablets (when applicable), and ictotest tablets (when applicable) (see Back up Urinalysis procedure).
4.4.4 Return the unused portion of control to storage between 2-8°C. immediately after removing the above amount. It will remain stable for 30 days if stored between 2-8°C. and kept tightly capped.
4.4.5 Centrifuge the MAS control for 5 minutes at 1500 rpms and examine microscopically in the same manner as an unknown.
4.5 Reagent Lot Change
4.5.1 If urine reagent lots change, a new calibration must be performed and (dipsticks, alternate test reagent lots, etc…) QC must be run on UA controls and compared to the new lot readings. This is to verify the performance of the new reagent lot. Log the lot number of the new reagent on the logsheet and the results.
4.6 Expected Results
The lot number specific MAS control expected results are printed on the corresponding value sheet insert found in each box of MAS control bottles.
Form number F-WI-HEM-052-A is used to record all Urinalysis control results. Use the following procedure to complete form F-WI-HEM-052-A.
4.6.1 At the beginning of each month, fill in the following information across the top of form F-WI-HEM-052-A for each level of control to be used.
4.6.1.1 Month and Year
4.6.1.2 Level of control being tested
4.6.1.3 Lot number and expiration date of the control
4.6.1.4 Transpose the Reagent Strip/Method specific
expected range for each parameter being used in
Urinalysis testing from the corresponding lot
number/control level value sheet.
4.6.2 On the line corresponding to the current date and time (am or pm) of use, record the results of each parameter tested into the appropriate column. Review ranges for each parameter to ensure that the control is achieving the expected value.
4.6.3 Record the result of all refractometer testing, Icto test (when applicable), and clinitest (when applicable) into the appropriate column across from the day of testing. Review ranges to ensure that the control is achieving the expected value.
4.6.4 Record the microscopic test results for WBC and RBC into the appropriate column across from the day (am only) of testing.
4.6.5 The person who performs the test is to place their initials in the Tech column for the current day and time (am or pm) of use to signify that the control ran as expected and patient testing can be performed. If the control fails to perform as expected, rerun the testing on a fresh aliquot of control. If it again fails to perform as expected, obtain a new bottle of control and retest on an aliquot from the new bottle. If after rerunning the test on the fresh bottle the results are still out of expected range, notify supervisor and discontinue patient testing.
4.7 Reference
MAS Liquid Urinalysis Control Insert; Medical Analysis Systems, Inc; Camarillo, California; Part No. UA1-INS Rev. October 2000; ISO 9001 Certified Company.
Review by Performing Lab’s Medical Director or Designee
See previous hard copies with Department Mgr and PDF files in WI Directory for reviews prior to 2011
Electronic signatures:
Reviewing Authority
Date
Christopher DeMoro, MLS (ASCP)
9/23/11
Document Change History: 9/23/11: Name Change
Page of 3 WI-HEM-052

I now use the TenFourFox browser on our remaining PowerPC Macs including a G4 PowerBook. Web sites see it as a newer version of FireFox tha and G4 can support and you get much better compatibility. Wikipedia info/history here:
http://en.wikipedia.org/wiki/TenFourFox
The TenFourFox official site and download is here:
http://www.floodgap.com/software/tenfourfox/
Downside: the last version of TFF that supports plug-ins was V17 so current versions won't play Flash animations. Even when TFF played Flash, the old G-series Mac processors were struggling with modern web video content, so you are not losing much.
If you must have smooth-playing web video, you'll need a new computer, as very little web video content is optimized for our PowerPC processors on old Macs.

How can I do to change the web site when I open a new tab.

Dear Friends...
I cant find information, how to changes the web site when I open a second tab. Example: when I open Firefox my home page is google and that is perfect but when I open a second tab, why appears yahoo as home page? I want to changes that and I cant find how to do it . Thanks

The normal behavior is to open a blank tab, an add-on will be causing it to display Yahoo. One add-on that does this is the freeze net assistant, if you have that one you can uninstall it and it should revert to opening a blank tab.
There are add-ons that let you specify what should open in a new tab, such as:
* NewTabURL - https://addons.mozilla.org/firefox/addon/newtaburl
* New Tab Homepage - https://addons.mozilla.org/firefox/addon/new-tab-homepage
Another way of opening the home page in a new tab is to middle click on the home button in the navigation toolbar.

I saved web page as html file, but can't open saved file as web page

I did a FILE, SAVE PAGE AS, then chose 'WEB PAGE COMPLETE' - and a directory is created on my hard drive - with the directory name, for example - "c:\....\Ask a Question _ Mozilla Support.htm". (for this web page).
When I try to open the saved web page from Firefox, using FILE, OPEN, I see a new window that looks like a file manager window, I then select that saved .html file and click OPEN, and a new window opens that looks like file manager - displaying with all the files in that directory - "Ask a Question _ Mozilla Support.htm". That is, it does not open and dislpay the web page as I expect it should (that I saved earlier).
However, if I go to the file manager, I can see that directory is saved, and has the Windows Explorer icon associated with the directory "ask a question ....html", and also has a file type of HTML listed. If I double click that directory in file manager, Windows Explorer will open that directory and dis[play it as a web page, as I expected.
I would like to know why Firefox does not open the directory name as a web page from the FILE, OPEN command, but instead shows me the directory contents(all the files in that directory)?
BTW, if I try FILE, OPEN, using Windows Explorer the same thing happens - it opens a new window listing all the files in that directory.
Is this the way the FILE, OPEN is supposed to work?
It seems confusing, because if I am in any other program, for example WinWord, and do a FILE, OPEN command on a Word file, it opens the file as a Word Document - it does not just show the file in a "file manager window.
But when I click FILE, OPEN on an HTML file(directory using Firefox, it does not open that html directory as a web page?

I am in the Windows Explorer 'Details' view, and I see the folder with 'Type' of FILE FOLDER. In that folder are all the .js and .css and .png files - as cor-el said.
''But now I also see'' that there is also an htm file - ''with the exact same name ''as the folder, but it has a 'Type' of 'HTML Document'. When I have Firefox do a File, Open on the HTML Document - it does open the web page that I saved and does display it as a web page.
I did not realize that Firefox saves both:
1) a Directory '''(Type 'File Folder') '''''', and,
2) an html file''' (Type 'HTML Document')
... '''and that they are the exact same names! '''
I was clicking on the wrong one! Instead of clicking in the .html file, I was incorrectly clicking on the folder!
(The archive add on looks interesting, but shouldn't I be able to open the saved web page, from the browser, using File, Open File) ?

I can not open my Muse account shows this panel why?

I can not open my already designed site with Muse eventhogh enter my id and password?

Hi, Please reach out to the the chat support and let the tech support people help you with that, http://helpx.adobe.com/contact.html?product=muse&topic=downloading-installing-and-setting- up# Click on I still need help and you will see chat button.

Can't open reader on the web & can't print!!!

I made the mistake of trying to update my adobe reader to 9.3 and now I can't open .pdf files in a web browser or print any of my .pdf's. I've tried everything the support site said to and nothing's worked!!!
PLEASE HELP!!!!!!
Thanks!!!!

I just tried that and its still not working.
Thanks for the suggestion though :-)

I need to open a column of web sites from a spreadsheet at one time. How can I do this?

I have a spreadsheet of web sites. I am looking for a way to open them in Firefox. I want to open 15-30 of them at a time to see what is English and what is safe for work.

Does your spreadsheet software show the URLs as live links? In that case, if Firefox is your default browser, you could click the links individually to load each site.
You also could try saving the spreadsheet as HTML and opening it in Firefox to ease that process a bit.
(Automating the process probably will take longer than doing it manually...)

I can't open my Muse CC Web Site

Similar Messages

Maybe you are looking for