I can't open Photoshop 5.5 after upgrading to mountain lion

I just upgraded my OS to mountain lion and now whenever I open an adobe system it will open, but if I try to open an existing or new project my computer restarts. Help?

If your computer restarts, you're looking at a hardware or OS defect.
And mylenium is correct - the video card is the likely suspect, but it could be RAM or anything else in your system.

Similar Messages

  • How can I resolve backup time machine after upgrade to Mountain Lion?

    Time machine backup is "failed" and message reads:  The backup disk image "/volumes/data/lynnblake's MacBookPro sparsebundle" is already in use.
    I have no idea what this means or how to solve.  It started after my upgrade to mountain lion.

    Shut down the computer then restart it.

  • Can't open my photo library after upgrading to iPhoto 11.  is it possible to load iPhoto 9.0.1 after loading 11?  have followed all other instructions but it still won't let me open iPhoto.

    can't open my photo library after upgrading to iphoto 11.  Is it possible to download iphoto 9.0.1 after installing '11.  Have followed all the other instructions and am in a loop which doesn't allow me to access iphoto or my photos.

    when iphoto wouldnt open we read the trouble shooting info and it said that we may have needed to download 9.0.1 if we had an older version.  We obviously didn't download it before the upgrade and wondered if it would cause problems or indeed solve the problem if we downloaded it now!
    When we try to open iphoto is says:
    To open your library with this version of iphoto it first needs to be prepared
    To prepare the library use the iphoto library upgrader available from Apple.
    We have downloaded this twice now and it still sends us this message when we try to open iphoto. 

  • After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

    After upgrading to Mountain Lion, I cannot open my File Maker Pro files. Can I use Numbers to open these files?

    Numbers is a spreadsheet program and FileMaker is a database program, so you probably can't use Numbers to open them unless you had first exported them from FileMaker in a spreadsheet-compatible format.
    If you upgraded from 10.6 Snow Leopard or earlier and your old copy of FileMaker won't open anymore, it might be a PowerPC application that is not compatible with 10.7 and later. If that is the case, to work with your FileMaker files you should upgrade your copy of FileMaker to the latest version, which seems to be FileMaker 12.

  • Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so?  Help?

    Can't open old Numbers spreadsheet after upgrading Mac to Yosemite. Error message says it should first be upgraded to Numbers 09 but doesn't provide method to do so?  Help?

    There is a chance the spreadsheets were made with a Numbers or AppleWorks version so old that it's not compatible anymore with the latest Numbers version (yes this can happen)

  • Can't open iCal on IMac (early 2009) after upgrade to Mountain Lion

    Can't open iCal on IMac (early 2009) after upgrade to Mountain Lion.
    Tried opening it multiple ways.
    Nothing works.

    bfackler,
    The iCal application in Mountain Lion has been replaced by "Calendar."
    Can you open "Calendar?"

  • After upgrading to mountain lion, contribute cs4 did not open

    After upgrading to Mountain Lion, I found that Contribute CS4 did not open.  In searching for an answer I found the following on the Adobe forum:
    "Earlier versions of Adobe Photoshop (CS3 and CS4) software were also tested with Mountain Lion and there are currently no known issues."
    So continuing to search, two days of frustration ensued as I "chatted" with 2 unhelpful Adobe customer support reps, searched unhelpful Apple and Adobe websites and posted my question in various places.  Finally I found that the above statement was completely wrong when I received the following from an Adobe staffer:
    Mountain LION is not a supported platform for Adobe Contribute CS4. The supported versions are Latest Adobe Contribute 6.5 and Adobe Contribute CS5.X.
    And now I have to spend hundreds in order to maintain my website after upgrading to Mountain Lion.  I don't even know to whom I should take my complaint, Apple or Adobe.  Does this mean I have to research every piece of software I use before upgrading my Mac?  At the very least, Mac owners should be forwarned of platform support failures for major 3rd party producers. I'm doing my bit here.   How about you taking some responsibility?

    I just baught a new imac from the apple store and loaded mountain lion when I got home due to the time it would take there.  I then used migration assitant to load CS4 from my mac pro that is using snow lepord.  This worked flawlessly. CS4 and Bridge work great.  I then downloaded the mountain lion upgrade to my wifes mac pro that was also using snow lepord and once mountain lion was instaled it disabled CS4 compleatly.  I will repost the results tomorrow. I believe that I can reinstall CS4 to her mac pro now that she has mountain lion installed using migration assistant from my mac pro since it worked this way with the new imac.  I hope this works because I want to upgrade my mac pro to mountain lion but can't afford to lose CS4. 

  • After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I don't seem to have the "com.apple.garageband.plist" file that has been a common solution. Any suggestions?

    After upgrading to Mountain Lion, I repurchased Garageband and I can't get passed the complete installation. I've read through several posts that all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist. Any solutions or suggestions?

    Did you upgrade from SnowLeopard?
    I can't get passed the complete installation
    What exactly is happening? Is GarageBand trying to download over and over again?
    all reference the "com.apple.garageband.plist" solution. I don't seem to have the referenced .plist.
    The property list stores your preferences, but also the settings from the last run of the application.  If that file is corrupted in some way, you might see third behaviour.
    You must have this file, for it will be recreated automatically, if it is missing, or you have a permissions problem with your user library.
    Perhaps you did look in he wrong place.
    in MacOS 10.7. or later the User Library is hidden. To find the Preferences Files use the Finder's "Go" menu:
    Quit GarageBand, if it is running.
    Click onto you Desktop to bring the Finder forward.
    In the Finder Menu press "Go" and hold down the "option/alt" key, until your user library appears in the drop-down menu
    Select "Library" and in the Finder window that opens navigate to the "Prederences" folder; move com.apple.garageband.plist to the Desktop.
    Log off and on again (don't skip that step!). Retry GarageBand and see if it GarageBand is now downloading the missing content properly.
    If that does not fix the problem, post back and explain in more detail what the download problem is.
    Why did you "repurchase" GarageBand? If you already owned GarageBand '11, it should be unnecessary.
    Regards
    Léonie

  • After upgrading to Mountain Lion 10.8.2, I cannot print to my Samsung laser printer ML 2525w?  How can I get this set up to print?

    After upgrading to Mountain Lion 10.8.2 on my iMac, I cannot print to my Samsung B&W Laser printer ML 2525W either by USB or wireless.    Any help on how to setup or reconfigure would be apprecaited.
    I either print blank pages or prints one time then goes off line, or spits out a bunch of blank paper, etc.  Have gone through all the standard fixes, reboot, reset , reload driver, etc.

    From the link to the Thread you provided, I worked through the one message procedures that were listed.
    For ease of reference, I have copied them and printed them below.  This was an old thread but the guidance still works with no firmware upgrade required.
    I would stress that you MUST delete any and all files relating to USB connection of the printer to the MAC, including all print drivers (from both Apple and Samsung either from CD or web downloads) and all print queues, etc.  I was only able to get the printer to properly hand shake with my Mac by setting it up wirelessly after all old files were deleted with hard power off reboots on both the Mac and Printer. 
    I hope that someone from Apple will pass this note along to their programing department because there is some type of incompatibility in the new ML OS and the Samsung ML2525w print dirvers used for a cable (USB) type connection.  Apple needs to be talking to Samsung to get the USB issue resolved.  I am going to post this same message on the Samsung site to see if someone from there will contact Apple to work together on a final solution for USB connectivity.
    Here is the steps I followed to get my ML2525w to work in the wireless mode.  Again, I cannot stress the need to clean out all the old files (drivers, print queues, etc. - everything) before setting up wirelessly. 
    As a note, I ran this printer with Lion for almost 2 years and it always worked fine (both wireless and USB).  From other comments on the thread, users were good with this printer using Lep. and Snow Lep also. - - no issues from either a USB connection or wireless until Mountain Lion.
    Before the fix, I was experiencing many of the same issues as described on user chat threads, printer going offline after a print job.  1st page sometimes printing but all the rest of the pages were garbage.  No printing at all. Printer just running a bunch of blank pages out. etc.
    I run an iMAC 27" desktop with the ML OS upgrade just installed from Lion.
    "I've just installed one of these printers for my parents.
    First of all, don't waste your time connecting the ML-2525W as a USB printer. The printer will go offline after each print job. It's hopeless, at least (I assume) until Samsung gets around to publicly releasing a firmware update.
    Instead, you have to use the ML-2525W as a wireless printer. In that mode, it works fine.
    This is what I did:
    (1) First, if you have already attempted to install the Samsung driver software from the included CD-ROM, uninstall it. Get the uninstaller from the Samsung support site:
    http://www.samsung.com/us/support/downloads/ML-2525W
    Download the "Printer Driver (ver. 4.0)" ZIP file. It unzips to a folder that contains the uninstaller. Likewise, download the "Smart Panel Driver" ZIP file and uninstall the Smart Panel software.
    (2) Disconnect the USB cable from the printer, if it is connected. Pull the power plug on the printer and power cycle it.
    (3) Restart your Mac.
    (4) Go to the "Printer Driver (ver. 4.0)" folder that you previously unzipped. Inside it is a folder named "WirelessSetting". Open the folder and run the "Wireless Setting.app".
    (5) The application will ask you to connect the USB cable to the printer. Do so, and the Mac should be able to communicate with the printer to perform the wireless setup.
    (6) The application will show you a list of wireless networks. One of them is the wireless interface in the printer (ad-hoc). You can ignore that unless you intend to use the printer without connecting to another wireless network. In my case, I selected the wireless network in my parents' home (infrastructure) and entered the security passphrase. The application then configured the wireless interface in the ML-2525W to connect to the home network.
    (7) The Wireless Setting application will then tell you to disconnect the USB cable.
    (8) After finishing the Wireless Setting application, go to Word, Textedit, Pages, or Safari, and select a file or page to print. In the print dialog window, you should see the ML-2525W as a "Nearby Printer" (i.e. via Bonjour). Select the ML-2525W, and your Mac will automatically connect to Apple's Software Update and download the latest Samsung driver. If for any reason the Software Update download does not succeed, you can manually download and install the Apple driver using the previously published link in this discussion.
    (9) After that, you should be able to print to the ML-2525W whenever you want, without the printer going offline.
    (10) If you have a USB printer queue still in your Print & Fax Preferences (from your previous unsuccessful attempt to connect via USB), you can delete it. You only need to keep the Bonjour queue.
    Obviously YMMV, but in my case this procedure got the printer working reliably without the need for a firmware update."
    MacBook (white 12"), Mac OS X (10.6.5)

  • After upgrading to Mountain Lion, i can't connect to app store or safari

    After Upgrading to Mountain Lion, I can't access the app store, itunes store, Safari - anything that requires the internet.  I tried resetting my modem and rebooting.
    I also tried deleting items from the keychain that look like they are related to the above.  When I did that and rebooted, It works for a little while, and then gets back to where it won't login to anything on the internet and safari won't load anything.

    This means that at some time you had the iWork ’09 trial installed. You need to delete the trial & then reinstall from the boxed DVD or the Mac App Store. The files to delete are the iWork ’09 folder from the main HD > Applications; the iWork ’09 folder in HD > Library > Application Support & the individual iWork application plist files found in HD > Users > (your account) > Library > Preferences for each user. Yvan Koenig has written an AppleScript that removes the files. You can find it on his box.com account in for_iWork'09 > other_iWork'09 items > uninstall iWork '09.zip.

  • I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 scanner and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • IPhoto Library won't open after upgrade to mountain lion

    One of my iPhoto libraries (stored on a WD Pasport Studio) won't open properly after upgrade to Mountain Lion 4oo5 open ok. One opens but disc symbol keeps spinning and Iphoto stops responding. Any ideas?

    See if anything in here will fix it:
    1. Hold down the Command and Option keys as you click the iPhoto icon.
    The Photo Library First Aid window opens:

  • TS4118 Can I retrieve to do list from old calendar after upgrading to mountain lion?

    Can I retrieve "to do list" from old calendar after upgrading to mountain lion?

    Hello MacMystie,
    Thank you for using Apple Support Communities. 
    If you have a recent backup with the old "to do list" you can use the following article will provide information on recovering information from a backup. 
    Recovering iCloud contacts, calendars, and bookmarks from an iTunes backup of an iOS device - Apple Support
    Regards,
    Jeff D. 

  • HT3669 I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    I have an Epson Perfection V100 and can no longer scan after upgrading to Mountain Lion and Creative Suite 5.5. Any suggestions?

    Check the Epson web site for updates to drivers and Epson scan software.

  • After upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load sec to open, never took that long.

    after upgrading to Mountain Lion my Mac Book pro takes 1min 15 to load

    Apple made some changes to increase security that slowed the boot time.
    Startup - Slow Boot
    Startup - Slow Boot (2)
    Startup - Slow Boot (3)

Maybe you are looking for

  • How to extract a csv registered in a BLOB column

    I've got a BLOB column where there is a CSV. How can I download the CSV? Oracle vers. 8i Thanks in advance!

  • App Store. Could not sign in. An unknown error has occurred.

    I keep getting this message on my iPhone 4, iOS 6. Every time I try to update my apps after I put my password. Have not changed anything on the phone itself, it just started doing it a few days ago. My iPad, Macbook and iMac with the same account do

  • Can I order iPhoto prints from Malta?

    The options menu on iPhoto lets you select a print products store based on your shipping address.  Does this mean iPhoto prints are restricted to certain countries only, and will this feature be available in more countries in future?   Can I print co

  • Format Numbers in BC4jJSP application(Urgent)

    Hi, I need to set the Format for a Number Fieled I am using Jdev3.1.and My code in JSP goes like this <jsp:useBean id="RowViewer" class="oracle.jbo.html.databeans.ViewCurrentRecord" scope="request"> <% RowViewer.initialize(pageContext, "Glenair_Glena

  • Exporting for Windows Media Player?

    I work on a Mac and am switching from FCP. In FCP the option was to export as QT or h.264. I'm noticing in CS5.5 on a Mac that there is no .WMV option. 1. Is .WMV not used anymore? 2. What is the best format to export for Windows users? Thanks.