I can't open the contacts on the my contacts page
Sometimes the list drops down but I can't select/open a particular entry
upgrade your browser to Firefox 8 and check
* getfirefox.com
Similar Messages
-
I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????
Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X. -
Can you opening multiple albums at the same time in Photo (not iPhoto)?
When converting the iPhoto library to Photo most of the albums that were in place in iPhoto converted to albums in Photo . . . .but not all. Some were retained as events mainly those that were folders within an album. In order to move them to the right album I would like to have multiple albums open at the same time (side by side) so that I can make sure not to duplicate photos or move them to the wrong spot.
I cant see how to do this, it seems that I can need to open one album and check phots and then close to look within and other and rely on memory. There must be a more efficient and accurate way to do this?All of the events in iPhoto were converted to albums and are located in the Folder titled iPhoto Event in the sidebar of Photos.
You can't open multiple albums at the same time. You can create a smart album that will do essentially the same thing with the following criteria:
Album is "A"
Album is "B".
The smart album will display all of the photos in those two albums. -
I can not open new tabe in the same page
i can not open new tabe im the same page
when i click on new tabe , it donsnt open at allUninstall the Ask toolbar and it should work again. There is a compatibility issue with the Ask toolbar and Firefox that prevents new tabs from being opened.
There are a couple of places to check for the Ask toolbar:
* Check the Windows Control panel for the Ask Toolbar - http://about.ask.com/apn/toolbar/docs/default/faq/en/ff/index.html#na4
* Also check your list of extensions, you may be able to uninstall it from there - https://support.mozilla.com/kb/Uninstalling+add-ons -
I can no longer open excel documents in my doc to go app. Error message simple reads can not open attachment. And the attachment is now a winmail.dat
winmail.dat files usually mean the email has been sent in rich text format - you could either the person who sent it to send it in a different format e.g. plain text or HTML, or there are a few apps in the store that support it (search for winmail.date in the store).
winmail.dat files : http://support.apple.com/kb/TS1506 -
Can't open PDF files in the browser. I've tried every fix mentioned and it still doesn't work!!!
I have Windows XP. Using firefox as my browser. Suddenly, I can't open PDF files in the browser. I've tried all the fixes mentioned. Nothing works!!! Checked the plugin settings, checked Adobe Reader settings.
I already fixed it. I never exited out of Firefox before deleting the mime file. it works now.
-
An error occurred while opening the file, you can not open this file because it does not page???
Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE>
<G_PLAN_CODE>
<PLAN_CODE>03101C3003</PLAN_CODE>
<PLAN_NAME>03101C3003_test</PLAN_NAME>
<PLAN_EM>John</PLAN_EM>
<PLAN_START_DATE>101.09.01</PLAN_START_DATE>
<PLAN_END_DATE>102.08.31</PLAN_END_DATE>
<PLAN_HOSTS>abc_super</PLAN_HOSTS>
<LIST_G_PURPOSE>
<G_PURPOSE>
<PURPOSE_CODE>11600000</PURPOSE_CODE>
<PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
<LIST_G_PURPOSE_CODE>
<G_PURPOSE_CODE>
<BUDGET_AMOUNT>0</BUDGET_AMOUNT>
<REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
<TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
<REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
<TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
<TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
<TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
</G_PURPOSE_CODE>
</LIST_G_PURPOSE_CODE>
<CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
<CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
<CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
<CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
<CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
<CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
<CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
</G_PURPOSE>
</LIST_G_PURPOSE>
<LIST_G_PLAN_SUBSQL2>
<G_PLAN_SUBSQL2>
<GL_DATE>31-07-12</GL_DATE>
<NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
<AP_UNAPP></AP_UNAPP>
<PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
<PLAN_CODE1>03101C3003</PLAN_CODE1>
<PLAN_EM1>Elly</PLAN_EM1>
<PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
<PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
<PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
<REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
<DESCRIPTION>101 year</DESCRIPTION>
<CF_GL_DATE>101.7.31</CF_GL_DATE>
</G_PLAN_SUBSQL2>
</LIST_G_PLAN_SUBSQL2>
<CF_START_DATE1>99.1</CF_START_DATE1>
<CF_END_DATE1>102.11</CF_END_DATE1>
<CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
<CF_OU_NAME1>IT Department</CF_OU_NAME1>
<CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
<CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
<CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
<CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
<CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
<CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
<CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
<CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
<CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
<CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
</G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support -
I have an iMac 10.8.2. When trying to download a photo attachment from an email I received the following : "You can't open application IPhoto because the classic environment is no longer supported." This occurred on 10/25/12 at about 11PM CST. The iPhoto icon in both the dock and the application folder is grayed out with the no or do not enter symbol. How can I resolve this so I can access my photos?
I have two iPhoto icons in applications. One is grayed out and has the no symbol, the date of last modification is Oct 25, 2012 11:07pm. The size is 110 KB and kind shows Applic…lassie). When I click on with CMD i it shows:
kind: Application (Classic)
size: 109,677 bytes (111 KB on disk)
Where: / Applications
Created: Thursday, October 25, 2012 11:07 PM
Modified: Thursday, October 25, 2012 11:07 PM
Version: --
More info: --
Name and extension: iPhoto.app
Hide extension is grayed out and checked
Preview shows a photo I had attempted to save to iPhoto
The second iPhoto icon is also grayed out, but the symbol is an envelope, the date of last modification is Oct 12, 2012 12:09PM. The size is 548 KB and kind is shown as an email message. When I clicked on it with CMD i it shows:
Kind: Email Message
Size: 547,665 bytes (549 KB on disk)
Where: /Applications
Created: Friday, October 12, 2012 12:09 PM
Modified: Friday, October 12, 2012 12:09 PM
Version: not listed
Name & Extension: iPhoto.eml
Hide Extension: checked
Open with: Mail
Preview shows a photo I had attempted to save to iPhoto -
I can't open one Quick Time movie file. It says: Quick time player can't open (names file) because the movie's file format isn't recognized. Only happens on this one file. All the others of a two hour shoot are fine.
Any ideas what's happened and is there some way to open that file and retrieve what's on it?Thanks this was useful. I have been ripping my audiobooks and I was finding that they would get uploaded to iCloud in the process, which in itself was fine, but then iTunes would not let me change the media type to Audiobook, which is annoying as it effects how iTunes treats the media. Like showing you the skip back 10 seconds button.
The general outline here helped me work around the issue and change the media type before the media was re-uploaded to iCloud.
Sean -
i just tried to open video file on youtube. but it shown "can't open "video.3gp". The file may be damaged or may not be a movie file that is compatible with QuickTime Player. How can i solve this issue?
i just tried to open video file on youtube. but it shown "can't open "video.3gp". The file may be damaged or may not be a movie file that is compatible with QuickTime Player. How can i solve this issue?
In what file type and compression format did you download the YouTube content? I.e., to avoid such issues, you would normally download the source files as content that is natively compatible with your target player or convert incompatible file type/compression format combinations to files that are compatible with your targeted media player. -
My ipad2 can't open a program in the explorer. It says that I need to download windows explorer 6 or higher. It opens other programs. How do I download windows explorer 6 or higher?
That is because whoever programmed the web site used Internet Explorer extentions. These will only run in Internet Explorer. So, use a computer with Windows to use that web site.
-
How can I open and listen to the PDF documents with audio in my iPad?
How can I open and listen to the PDF documents with audio in my iPad?
You need to use a PDF reader that supports multimedia. Adobe Reader 10.3 does not. Adobe has not stated whether it will support multimedia in the future.
In the meantime, you could buy an application that does like PDF Expert. Read about it here:
Finding the Best Tablet PDF Reader -
i can't open video file in the page , i download and install flash many time but don't work , i use Firefox 5 and windows 7
My current version of Chrome is having problems, too! It's so annoying. Anyone have any suggestions now? I basically can't view or download any PDFs because of this.
Does anyone else think this is a problem not only with Adobe? I would think Apple would have something to do with this? Wouldn't they get some idea from the developer versions that no browser can open PDFs while running Lion!? Pretty bad customer service on the part of a company that prides itself on being VERY customer-friendly. Wouldn't you say? -
Can't open Mini Bridge because the Extensions are not supported in PS CC Aug 2014
OS X 10.9.4 Ps CC Aug 2014. There's File > Browse with Bridge and no File > Browse with Mini Bridge chance. Neither can I open Mini Bridge from the Extensions panel, because Window > Extensions (not active). Adobe Extensions Manager CC is blind. HELP please
To my knowledge mini bridge is no longer supported.
You can run the full version of bridge which would be running anyway for mini bridge to work, then use that to view or open files. -
I have aperture 3.4.5 but si not available the uograde at 3.5 and i can't open my library after the update to' maverick
Marco,
is your main system language set to English? If not, change the language to English in the "Language&Region" System Preferences (see: Re: I bought Aperture in a box et can't upgrade from 3.4.5 to 3.5.). Then sign back into AppStore and reload the Updates panel.
Other things that could prevent the update are, if you moved Aperture from the Applications folder or renamed it. Then put it back.
Léonie -
hey, im really sick of this, how can i open folders but in the same windows, when i open a folder which is inside of another one, it just open me a new window, its so annoying, could anyone tell me what to do? im using mac os 10.7.2
Finder > Preferences > General > Always open folders in a new window: uncheck
Maybe you are looking for
-
Delete files in /lib/ext folder
I have an applet that used to install and use a third-party jar in /lib/ext. The jar is recently got upgraded but I have problem deploying the new jar file. Because the file is in /lib/ext, it is always loaded and used by JRE, I can't delete the file
-
Can't open document in Numbers from iCloud
I can not open a numbers document from Icloud. When I try to open the document, which is listed with other documents I get a message saying I must have the newest version of numbers. I have already updated to Mavericks and the upgraded Numbers. Wh
-
Oracle DB Down / Need Assistance
Hello, When I try to start our database I am getting the following errors. ORA-01172: recovery of thread 1 stuck at block 22880 of file 28 ORA-01151: use media recovery to recover block, restore backup if needed Questions 1) Are there any way to reso
-
How can I disable taskbar transparency in windows 8 RTM?
how can I disable taskbar transparency in windows 8 RTM?
-
I've tried enable/diasble plugins etc. Update flip for mac Firefox is updated Mac OS is updated Mac software is updated