I can't open the control centre with a Griffin Survivor Case on my iPhone 5.

The title says it all really. The plastic of the case ends really close to the screen and there is an inbuilt screen protector. This means I can't register touch on the bottom edge of the screen, which is apparently where you have to swipe to open the control centre. I have no problems opening the notifications, swiping down from the top.
Does anyone alse have this problem, which the same or different cases? I know there are similar issues with Otterbox cases too.
I hope Apple will notice the problem and make a fix soon. It should be simple enough - just move the swipe spot up a little like the one at the top of the screen.

I have the OtterBox Armor case which has a similar design and thus problem. After much practice I can now open CC with about 3 or 4 attempts. Much better than when I started and thought it just couldn't be done. I really have to start at the exact middle of the bottom of where the screen meets the case.

Similar Messages

I have up dated my iPad 2 too osi7 and I can't open the control centre by swiping. please help!

I have up dated my ipad 2 to osi70.2 and can't open the control centre by swiping up from the bottom as shown on web. Is there a setting I need to change?

Swipe up from bottom of screen.
Control Center
http://support.apple.com/kb/HT5858

I can't open the control centre or notification centre on my phone unless it is locked. When my iPhone 4s it unlocked I csnt pull up or pull down either. What do I do?

Recently got an iPhone 4s, was working fine until I discovered that I can only open the notification centre and control centre I on the the lock screen. How do I fix it so I can open it?

Hi Lana,
Thank you for using Apple Support Communities.
To start troubleshooting this issue where you're unable to access the Control Center or Notification Center when the iPhone is unlocked, please first restart your iPhone, and if the issue persists then reset the iPhone.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Cheers,
Alex H.

I can't open the digital booklet with my album!

I had an album an album on pre-order that was released yesterady. I download it, notice I receive a bonus digital booklet and Adobe Reader can't open it!
And it costs money to call iTunes support? I think that's pretty low... Any suggesstions?

Nevermind, I found the answer. I went to View>Show Downloads and there was one download available for the digital booklet.

I can't open the .pps file with iCloud -

I would like to find a solution to open my .pps files on iCloud
Thanks for your help
Power8888

iCloud does not open Powerpoint files

Haveing problems with Safari. It gives me an error message. Safari can't open the web page, because it can't establish a secure connection to the server. It only seams to have a problem on https sites. Any help would be apreciated.

Safari keeps giving and error message. " Safari can't open the web page( insert web page here) , because it can't establish a secure connetion to the server.
It only seams to have a problem with https sites.
Any help would be appreciated

The "s" in "https" indicates the site is a secure server--usually a site that will require a password. Connections to secure servers can be blocked by parental controls. Are you using any parental controls, either through OSX's settings (in System Preferences) or third party parental control software (such as Netnanny)? If so, check the settings to make sure they will allow the connection.

I have an HP Deskjet D4200 series printer that ised with my iBook G4. I would like to use it with my new MacBook Pro that I just purchased. Is there anyway to do this? When I try to install the driver using the CD, I get the message, "can not open the

I have a HP Deskjet D4200 series printer that I used with my iBook G4 and I recently purchased a new MacBook Pro 13.5" and I would like to use this printer with my new lap top. When I use the disc to try to install the printer driver, I get a message that "I can't open the application HP Installer because the Power PC applications are no longer supported. I am not sure what all that means but is there any way to use this printer with my new computer?
Thanks

It would help to post this in a more proper form. This is for the iTunes family of stores.

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

Please help with "You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported." I have seen other responses on this but am not a techie and would not know how to start with that solution.

Please help with the message I am receving on startup ""You can't open the application NovamediaDiskSupressor because PowerPC applications are no longer supported."
I have read some of the replies in the Apple Support Communities, but as I am no techie, I would have no idea how I would implement that solution.
Please help with what I need to type, how, where, etc.
Many thanks
AppleSueIn HunterCreek

I am afraid there is no solution.
PowerPC refers to the processing chip used by Apple before they transferred to Intel chips. They are very different, and applications written only for PPC Macs cannot work on a Mac running Lion.
You could contact the developers to see if they have an updated version in the pipeline.

I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?

I have a big crossbar mark over my FF4 icon after I've installed and replaced FF3. When I try to open the software, I get "You can't open the application "Firefox" because it is not supported on this architecture." What's up with that?

Firefox 4 requires at least OS X 10.5 and an Intel Mac. There is a third party version of Firefox 4 that runs on OS X 10.4/10.5 and PPC Macs, for details see http://www.floodgap.com/software/tenfourfox
If you prefer, you can get the latest version of Firefox 3.6 from http://www.mozilla.com/en-US/firefox/all-older.html

I can not open the ipad manual on my mac os x 10.5.8 since i sync with itunes acct. Safari just crashes. Is there any thing I can do

can not open the i pad manual on my lap top mac os x 10.5.8 since i sync with itunes acct. Safari just crashes. Is there any thing I can do Have the manual on IPAD2
Do I need My i pad to be connected to my laptop?
Howard

Do I need My i pad to be connected to my laptop?
Your iPad needs access to the internet via Wi Fi or 3G in order to access the App Store.
Tap the App Store icon in your iPad.
In the search field top right in the App Store window type in:
ipad user guide for ios 4.3. Tap Free / Get Book
As for Safari on your Mac crashing, you can start a new topic and post a crash report so we can try and help.
Click here: https://discussions.apple.com/index.jspa
Click New / Discussion. Select Safari.
Refine This LIst. Select Mac.
If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash information.
Now copy/paste the entire contents of the Crash Reporter window into your reply.
If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
Safari could be crashing due to third party unsupported add ons. Follow the troubleshooting instructions here.
http://support.apple.com/kb/TS3230?viewlocale=en_US

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

eBay or Craigslist would be the only choice.

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

I bought a canon EOS Rebel T5i. It came with photoshop elements 11. PS won't open my C2 raw files and says my camera isn't supported by the software I have downloaded 7.4 dng converter and I still can't open the files. What do I need to do?

You need camera raw 8.4 for your camera, if it’s Digital Rebel T5 EOS 1200D EOS Kiss X70. It is not compatible with PSE11; so it’s a bit odd if that software was bundled with the camera except that it will work with jpegs. I suggest you download and install the free Adobe DNG converter to convert your CR2 files to the Adobe universal Raw format and the DNG files will editable in PSE11(keep your originals as backups and for use in the camera manufactures software)
Mac download (.dmg file) click here DNG Converter 8.4
You can convert a whole folder of raw images in one click. See this quick video tutorial:
You Tube click here for DNG Converter tutorial

I have Photoshop CS5 and a Nikon D 810 camera. I have downloaded Camera Raw 8.8 & DNG converter. I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong?

I have Photoshop CS5 and a Nikon D 810 camera. I have downloaded Camera Raw 8.8 & DNG converter. I can neither open the raw files (.nef), nor process them with the DNG converter. What is going wrong? Thanks!

This is the last paragraph from my very first response to you, post #1 in this thread:
…Additionally, you need to install the DNG Converter, not just "download" it, and you need to launch it and run it on each folder of NEFs you wish to convert to raw DNGs. [emphasis added]

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop.

I can't open the psd file I did yesterday! It says that the file is not compatible with this version of photoshop. I worked in a CS6 version but also tried opening in a CC but nothing happens. Help
more info:
Photoshop never crashed or anything.
I was working in my school's mac but running windows, and the file was being saved in the school's network not on the computer. I thought it had been saved and I also copy and pasted the file in my hard drive to guarantee a copy but none of the are opening.
The file size was appox. 1giga
Thanks a lot

The problem was saving over the network. Working across a network is not supported.
This is the boilerplate text often used in connection to saving to a network (please NOTE the part where it explains that normally, it does work, but that it is impossible to troubleshoot someone else's network remotely, and that's why it's not supported by Adobe):
If you are opening files over a network or saving them to a network server, please cease and desist immediately in the event you are currently experiencing problems with one or more files. Working across a network is not supported.
See:
http://kb2.adobe.com/cps/406/kb406793.html
Copy the CLOSED file from your server to your local hard disk, work on it, save it again to your local hard disk, close it, and copy the closed file back to the server.
Of course, the fact that Adobe does not support working across a network does not necessarily mean it won't work. It should.
Adobe's position is that there are too many variables in a network environment for them to guarantee that everything will work correctly in every network, especially given the fact that if something does not work properly, it's probably the network's fault, and Adobe has no way of troubleshooting your network.
If you can't work locally, you are on your own, and if something happens, you're on your own. If you must work from a server, make sure your network administrator is a competent professional.
When problems arise, a lot of valuable work can be lost.

I can't open the control centre with a Griffin Survivor Case on my iPhone 5.

Similar Messages

Maybe you are looking for