I can't open this calendar in Indesign
I tried to download adobe exchange like the program said but I get this error message when i try to open the calendar.
The document uses one or more plug-ins which are not currently available on your system.
1) sharedcontent.rpln
2) text.rpln
3) graphics.rpln
and several others .rpln files
CANNOT open the file . Please upgrade your plugins to their laatest versions or upgrade to the latest version of Adobe Indesign. I have CS5
What Ned said. These warnings appear if you try to open newer version docs in older versions.
Mylenium
Similar Messages
-
A day or two ago I went through installing Adobe InDesign CS4 on Leopard OS X.5.8. After what appears to be a successful installati
on, in launching InDesign CS4 the message " You can't open the application "Adobe InDesign CS4" because it is not supported on this
architecture" comes up". Calling in to support and speaking with the agent who read through previous posts, suggested to me that I
should try the same fix that has been suggested when I ran across an error when installing Adobe InDesign CS4 on another separate ha
rd drive externally connected to this computer running Snow Leopard OS X.6.1 for the error reading: "Damaged &/or incomplete install
ation" when launching afterwards. The support technician told me to first delete with the uninstall Adobe InDesign CS4, InDesign.
Following this I am told to run the CS4 Cleanup Utility. I restart the computer each and every time after running each of the utili
ties. Now I am told to install InDesign as a trial version from the DVD and after installation to go ahead & enter the serial numbe
r. When launching InDesign CS4 after installation got back the same error as before: "You can't open the application "Adobe InDesig
n CS4" because it is not supported on this architecture" comes up". Followed KB404711 article and no success. What else can be don
e to fix this issue?
This morning contacted Adobe Support regarding this response:
After having a detailed reserach on your issue i acme to the conclusion
that the problem you are having is not related to Adobe software but its
in fact related to your MAC version ( OSX-5.8). While reseraching your
issue i came across
to many forums where a lot of postings were about the similar error but
with different products the only comon thing was all the Errors were
with Mac machine , also when you check the system requirements for
Adobe Indesign Cs4
by going to the following link
http://www.adobe.com/products/indesign/systemreqs/?promoid=DRHXE you
will find the Mac OS version supported are from Mac OS X
v10.4.11–10.5.4. but we do support Snow Leoprad , so i would like
to advise to you to either contact your system manufacturer or upgrade
to Snow Leopard ( mac os x 10.6)
I have been told that my case is being sent to Level 2 agents and that it can take 24-48 hours for a response. In the meantime I decided to see what the Support Forums can do for me. Until then I am down. Thanks for the help.In the application folder there is a folder 'Adobe InDesign CS4' within which there is just the application file. I would expect there should be more file there??
I've un-installed and installed again - still the same.
Even downloaded the dmg again and done thwe whole thing over again. -
Trying to install inDesign CS6 on my imac. But everytime I try at end of install I either get a problem with install error, or if it does show up in my applications folder, it has a "no" sign and when clicked I get:
"You can't open the application Adobe InDesign CS6 because it may be damaged or incomplete."
Need help, Im a freelance desktop publisher and need this to work!After I deleted Adobe File Manager because it was always popping up annoyingly, I got a similar "damaged application - reinstall" message. However, InDesign didn't seem to be affected. Nevertheless, I reinstalled AFM, and fixed the problem, except for the annoying appearances of AFM.
If it's not present on your system, you can search Google for "download adobe application manager mac" without quotes, to download and install it.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices -
You can't open the application "Adobe InDesign CC 2014" because it is not responding.
For some reason InDesign has decided to stop responding. Acts like it wants to launch but then does nothing. When I try to launch it from the Finder rather than the Dock, I receive this message:
You can’t open the application “Adobe InDesign CC 2014” because it is not responding.
Please advise.Wild guess here, but the installers are known to fail to set the correct permissions on the preference folders. See Cant launch new inDesign CC | Adobe Community and substitute Version 10 where you see Version 9.
-
HELP! How can I open .doc spreadsheets in InDesign?
I have several spreadsheets of information in .doc format.
Is there a way that I can open this information in InDesign? Searched for a plug-in but to no avail.
HELP!If they're Word document, just create a new document and use the File > Place command. Browse to the Word document, choose it and then shift click the page.
This will create as many pages as you'll need.
Bob -
"iCal can't read this calendar file. No events have been added to your iCal calendar."
How do I deal with this error message-"iCal can’t read this calendar file. No events have been added to your iCal calendar." ? .ics vs .vcs?
ThanksGreetings,
What version of the Mac OS and what version of iCal are you running?
Are you using MobileMe calendars (or any other server based calendars like Google) in your iCal?
While you answer those questions you can try the following troubleshooting:
1. First make an iCal backup: Click on each calendar on the left hand side of iCal 1 at a time highlighting it's name and then going to File Export > Export and saving the resulting calendar file to a logical location for safekeeping.
2. Remove the following to the trash and restart your computer:
Home > Library > Caches > com.apple.ical
Home > Library > Calendars > Calendar Cache, Cache, Cache 1, 2, 3, etc. (Do not remove Sync Cache or Theme Cache if present)
Home > Library > Preferences > com.apple.ical (There may be more than one of these. Remove them all.)
---NOTE: Removing these files may remove any shared (CalDAV) calendars you may have access to. You will have to re-add those calendars to iCal > Preferences > Accounts.
Once the computer is back up and running open iCal and test.
Hope that helps. -
I have a problem with a pdf file which does not open with reader in windows 8 but it opens properly with adobe pdf reader. All other pdf can be opened in reader.But when i open a pdf(see this link for pdf for which i got error http://incometaxsoft.com/temp/Form.pdf)
it gives error as "Can't open this file. There's a problem with file format".
The same file opens properly in adobe pdf reader.You can check the pdf file which i have mentioned in the link above.But the reader which comes with windows 8 can open some other pdf in the same PC.What may be the error causing this??This has turned out to be an enormous issue for me as I sell PDF files as ebooks. I have done a fair amount of investigating this for my system.
My files have to be compatible not just across readers but across operating systems.
To date, I have over 200 PDFs that have functioned flawlessly across Mac, PC (Windows 7 and below), Android, iPhone/iPad, Linux.
I personally test my PDFs using a variety of readers and PDF editors including
PDF XChange (my favorite)
Foxit (runner up for me and I recommend for most people)
Adobe (the bloated monster)
Nitro 9 (great for moving graphical elements around)
ABBYY
And the Nuance PDF Create toolsets
Those are off the top of my head. There are a bunch on Android that I test with too.
I am running the Windows 10 Pro Tech Preview and I have this same problem so I know it isn't fixed yet in any kind of pre-release way (-sigh-)
Here is what I've learned for my situation
The PDFs I created using NUANCE'S PDF CREATE PROFESSIONAL VERSION 8
all fail using the built-in Windows 8/10 PDF reader.
When I look at the PDF properties for these Nuance created files, the underlying engine used to write them is called "ImageToPDF". Using ABBYY it indicates their own engine as does everyone else that I've tried. It is easy for you to check to see
what created your PDF by doing a "Control D" (look at the document properties). Perhaps there's a common engine causing issues.
If I use the exact same source files to create a PDF using any of my other tools I have no issues. I checked the PDF versions made by the tools and they are all set to 1.5.
A customer mentioned being able to convert them in a way they worked by saving them without having to do any kind of extraction, but I have not been able to duplicate that. Perhaps he did a "print" which seems like it could work.
In summary, the workaround everyone is talking about, using an alternate reader, of course works. But not everyone wants to change.
The culprit I have found is my Nuance PDF Creation tools that are using the ImageToPDF engine.
I hope it gets FIXED as I really don't want to have to regenerate all of my PDF files. -
After updating my MacBook Pro to yeosemite I want my old desktop picture back. I did a full back up before the install. I found the "Settings" folder in Time machine but when I try to open it I get an error message saying "You can not open this folder. It is in TimeMachine".
Can you browse the Time Machine drive from Finder?
If you can and you know where the picture was stored ie on your desktop you can browse through the folder structure to the picture copy it and paste it somewhere on your new install before right clicking it and 'set as desktop background' -
Hello
I had configured Office Web Apps for SharePoint 2013 which was working fine for about 2 months until this morning.
The error message I get for WORD, PDF and Excel files is:
The ULS logs on the WFE give me this:
WOPI (CheckFile) Proof Data: AccessToken Hash '1572676699' [1054 bytes], URL
01/08/2014 11:01:58.01* w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI afk59 Monitorable
WOPI agxqc Medium WOPI Signature verification
attempt failed with public key 01/08/2014
11:01:58.01 w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI agxqc Medium WOPI
Signature verification attempt failed with public key
01/08/2014 11:01:58.01 w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI agxqb Medium WOPI
Signature verification attempt failed - no public key e75ead18-af27-4d44-ba50-b38b408011e8
01/08/2014 11:01:58.01 w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI ahdzz Monitorable WOPI
Proof: All WOPI Signature verification attempts failed e75ead18-af27-4d44-ba50-b38b408011e8
01/08/2014 11:01:58.01 w3wp.exe (0x1368) 0x09B4 SharePoint Foundation
WOPI ag7pj Unexpected WOPI
(CheckFile) - Invalid Proof Signature for file Letterhead Template.docx url: http://site.contoso.com/_vti_bin/wopi.ashx/files/9c5d0d7077aa43e9a9538c02deb57580?access_token=eyJ0eXAiOiJKV1QiLCJhbGciOi
The ULS Logs on my Office Web Apps server gives me this:
Error message from host: Verifying signature failed, host correlation: d197d187-ef9d-42f6-ae4f-c4b8199c1078
WOPICheckFile,WACSERVER FileNotFound
WOPI CheckFile: Catch-All Failure [exception:Microsoft.Office.Web.Common.EnvironmentAdapters.FileUnknownException: WOPI 404
Any idea what may have caused this issue all of a sudden?
Thank you.
YoshiHi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi -
I am getting error when hovering on document in sharepoint online "sorry there was a problem and we can't open this document.If this happens again, try opening the document in Microsoft Word".I am sure that document is not corrupted and
all. something it showing the preview and sometimes it throwing this error. I hope this error is intermident. When clicking on the link also it throws this error but on refreshing it working fine. I dont know why it is happening. Please helpme to resolve
this issue.Hi Waqas
Thanks for your help with this. I had a look at both posts, the URL works fine from the WAC server and I am not using a System account to test docs.
Also, this is a production site that is accessible over the Internet, so we are using https therefore the WOPIZone is external-https.
Issue #3 in the above blog link does not reflect the same error I see on my servers.
I also had a look at the information in this link: http://technet.microsoft.com/en-us/library/ff431687.aspx#oauth
Problem: You receive a "Sorry, there was a problem and we can't open this document" error when you try to view an Office document in Office Web Apps.
If you added domains to the Allow List by using the
New-OfficeWebAppsHost cmdlet, make sure you’re accessing Office Web Apps from a host domain that’s in the Allow List. To view the host domains in the Allow List, on the Office Web Apps Server open the Windows PowerShell prompt as an administrator and run
the Get-OfficeWebAppsHost cmdlet. To add a domain to the Allow List, use the
New-OfficeWebAppsHost cmdlet.
I have not added any domains to the Allow list so this did not help either. Should I add the domain?
Any further help with this is much appreciated.
Thanks again.
Yoshi -
Dear all,
i am test the report to show "No Data Found" world, but, when i preview to PDF, i got the message :An error occurred while opening the file, you can not open this file because it does not page.
i try to load the other xml file that have data, and report work,no error.
i don't know where is the problem, so i need some help....
Thanks in advance for your response.
my rtf report:
<?call:header?>
<?if:count(PLAN_CODE)>0?>
<?for-each@section:G_PLAN_CODE?>
<?template:Header?>
<?for-each:G_PURPOSE?>
<?end for-each?>
<?end template?>
<?for-each:G_PLAN_SUBSQL2?>
<?end for-each?>
<?end for-each?>
<?end if?>
<?if:count(PLAN_CODE)=0?>
====================No Data Found ===================
<?end if?>
about xml:
if no data query back:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE></LIST_G_PLAN_CODE>
<CF_START_DATE>102.3</CF_START_DATE>
<CF_END_DATE>102.3</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>
if have data:
<?xml version="1.0"?>
<!-- Generated by Oracle Reports version 6.0.8.27.0 -->
<NARLGLR005>
<LIST_G_PLAN_CODE>
<G_PLAN_CODE>
<PLAN_CODE>03101C3003</PLAN_CODE>
<PLAN_NAME>03101C3003_test</PLAN_NAME>
<PLAN_EM>John</PLAN_EM>
<PLAN_START_DATE>101.09.01</PLAN_START_DATE>
<PLAN_END_DATE>102.08.31</PLAN_END_DATE>
<PLAN_HOSTS>abc_super</PLAN_HOSTS>
<LIST_G_PURPOSE>
<G_PURPOSE>
<PURPOSE_CODE>11600000</PURPOSE_CODE>
<PURPOSE_NAME>Pre-Pay</PURPOSE_NAME>
<LIST_G_PURPOSE_CODE>
<G_PURPOSE_CODE>
<BUDGET_AMOUNT>0</BUDGET_AMOUNT>
<REAL_BUDGET_AMOUNT>0</REAL_BUDGET_AMOUNT>
<TEMP_RECEIPT_AMOUNT>0</TEMP_RECEIPT_AMOUNT>
<REAL_PAY_AMOUNT>0</REAL_PAY_AMOUNT>
<TEMP_PAY_AMOUNT>-83006</TEMP_PAY_AMOUNT>
<TEMP_PAY_FINAL_AMOUNT>83006</TEMP_PAY_FINAL_AMOUNT>
<TOTAL_AMOUNT>83006</TOTAL_AMOUNT>
</G_PURPOSE_CODE>
</LIST_G_PURPOSE_CODE>
<CS_BUDGET_AMOUNT>0</CS_BUDGET_AMOUNT>
<CS_REAL_BUDGET_AMOUNT>0</CS_REAL_BUDGET_AMOUNT>
<CS_TEMP_RECEIPT_AMOUNT>0</CS_TEMP_RECEIPT_AMOUNT>
<CS_REAL_PAY_AMOUNT>0</CS_REAL_PAY_AMOUNT>
<CS_TEMP_PAY_AMOUNT>0</CS_TEMP_PAY_AMOUNT>
<CS_TEMP_PAY_FINAL_AMOUNT>0</CS_TEMP_PAY_FINAL_AMOUNT>
<CS_TOTAL_AMOUNT>0</CS_TOTAL_AMOUNT>
</G_PURPOSE>
</LIST_G_PURPOSE>
<LIST_G_PLAN_SUBSQL2>
<G_PLAN_SUBSQL2>
<GL_DATE>31-07-12</GL_DATE>
<NARL_DOC_NUMBER>0310107311004</NARL_DOC_NUMBER>
<AP_UNAPP></AP_UNAPP>
<PLAN_NAME1>03101C3003_101-102</PLAN_NAME1>
<PLAN_CODE1>03101C3003</PLAN_CODE1>
<PLAN_EM1>Elly</PLAN_EM1>
<PLAN_START_DATE1>2012/09/01 00:00:00</PLAN_START_DATE1>
<PLAN_END_DATE1>2013/08/31 00:00:00</PLAN_END_DATE1>
<PLAN_HOSTS1>KIC-Supp</PLAN_HOSTS1>
<REAL_RECEIPT_AMOUNT>0</REAL_RECEIPT_AMOUNT>
<DESCRIPTION>101 year</DESCRIPTION>
<CF_GL_DATE>101.7.31</CF_GL_DATE>
</G_PLAN_SUBSQL2>
</LIST_G_PLAN_SUBSQL2>
<CF_START_DATE1>99.1</CF_START_DATE1>
<CF_END_DATE1>102.11</CF_END_DATE1>
<CF_TITLE_NAME1>TCS Company</CF_TITLE_NAME1>
<CF_OU_NAME1>IT Department</CF_OU_NAME1>
<CF_SOURCE_CODE1>plan</CF_SOURCE_CODE1>
<CF_PRINT_DATE1>102.11.19 17:12:19</CF_PRINT_DATE1>
<CS_T_BUDGET_AMOUNT>517524</CS_T_BUDGET_AMOUNT>
<CS_T_REAL_BUDGET_AMOUNT>517524</CS_T_REAL_BUDGET_AMOUNT>
<CS_T_TEMP_RECEIPT_AMOUNT>289294</CS_T_TEMP_RECEIPT_AMOUNT>
<CS_T_REAL_PAY_AMOUNT>289294</CS_T_REAL_PAY_AMOUNT>
<CS_T_TEMP_PAY_AMOUNT>0</CS_T_TEMP_PAY_AMOUNT>
<CS_T_TEMP_PAY_FINAL_AMOUNT>0</CS_T_TEMP_PAY_FINAL_AMOUNT>
<CS_T_TOTAL_AMOUNT>228230</CS_T_TOTAL_AMOUNT>
<CS_REAL_RECEIPT_AMOUNT>289294</CS_REAL_RECEIPT_AMOUNT>
</G_PLAN_CODE>
</LIST_G_PLAN_CODE>
<CF_START_DATE>99.1</CF_START_DATE>
<CF_END_DATE>102.11</CF_END_DATE>
<CF_TITLE_NAME>Company</CF_TITLE_NAME>
<CF_OU_NAME>IT Department</CF_OU_NAME>
<CF_SOURCE_CODE>N/A</CF_SOURCE_CODE>
<CF_PRINT_DATE>102.11.18 15:48:10</CF_PRINT_DATE>
</NARLGLR005>Hi,
You mentioned you tried some steps but I'm not sure what they are, you may try my suggestion to resolve this issue, follow these steps:
Click Start, right-click Computer, click
Properties, and then click Advanced system settings.
On the Advanced tab, click Environment Variables.
Locate and select the __COMPAT_LAYER variable, and then click Edit.
Set the value of the __COMPAT_LAYER variable to EnableThemes. Or, delete the __COMPAT_LAYER variable.
If the issue persists, we can troubleshoot this problem in Clean Boot to determine whether background programs are interfering with PowerPoint:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support -
Can I open .pmd files in indesign? And how? Since indesign is a "substitute" for PageMaker it should/must be possible, but I don't know how to do it
CS6 was the last version capable of opening Pagemaker files. It's included with Cloud subscriptions, so if you don't have it installed (or an earlier version) you can download it from your cloud subscription.
To open them you use File > Open..., but the quality of conversion can range between nearly perfect and total garbage, depending on the PM file and the status of links (unembed images before trying to convert). -
after migration to a new macbook i cannot open photoshop. I get error message "you can't open this application "adobe photoshop cs" because powerpc applications are no longer supported"
You cannot run Photoshop CS on a new Intel-based Mac running OS X Mavericks. CS is far too old.
You'll have to buy Photoshop CS6 or Photoshop Elements 12. Or subscribe to CC. -
I have just set up Office Web Apps Server in a SharePoint 2013 test environment as per document here:
http://technet.microsoft.com/en-us/library/ff431687.aspx
Although I had some issues with Excel Web App at first, I've solved this and excel seems to work ok, However, the Word Web App just sits there spinning and ultimately give the error dialog:
"Sorry, Word Web App can't open this document because the service is busy. Please try again later" The Same link as above has a simple solution :
Did you install Office Web Apps Server on a domain controller? Office Web Apps Server cannot run on a domain controller. Office Web Apps Server must be installed on a separate server that is part of a domain. For more information, see
Software, hardware, and configuration requirements for Office Web Apps Server.
I certainly did not install on a DC - its a standalone server.
ULS Logs are growing by 2K per second even when I am not doing anything on the server.
VERY FRUSTRATED!So after further research we have found the following:
Un-bind and unindstall Web Application Server
Clean Server
Reinstall (by Mistake to the C: Drive)
Bind and Provision
WOW it works!
Un-bind, deprovision, Uninstall, Web Application Server
clean Server
Re-install to the D: Drive
Provision and Bind
wow - it DOES NOT work
Again - repeat the first scenario
and once again IT WORKS
SO Why doesn't it work on the D Drive - We've checked IIS Setting and Permission - there don't seem to be any differences.
SO - Why isn't this working when changing the default installation location, is it just me? Has anyone gotten this working installing to another drive?
Thanks
James Moore -
A friend wants me to put together on booklet that's been done in excel. I'm on a mac os 10. Do I need to download microsoft excel for mac or can I open the document through indesign?
I second LibreOffice as it's the most recent fork, however NeoOffice and OpenOffice will also work.
Just say No money to Redmond!
Also the old Ready Set Go! will be having a Lion version out soon.
It's a low cost page layout program (like Indesign but without the high price) and can make booklets etc better, import the excel grpahics from LibreOffice.
http://www.diwan.com/ready/prsg.htm
Maybe you are looking for
-
Doubt in the function module POPUP_GET_VALUES
Hi, i am using the function module POPUP_GET_VALUES. I am giving the table name and field name but the field name shows in display mode i am not able to enter any values in the given popup. What is the problem
-
How to disable the Selection screens of LDB's ?
Hi, How to disable the Selection screens of LDB's when we r using the predefined LDB for our executable pgm ? and how to include the predefined LDB can u write the Code for including LDb or if possible give an example of a Pgm using a Prede
-
how to make gallery mobileme size larger than 320 in width?
-
Gaps between clips on the timeline
I wonder if there is a way to gain control of moving clips on the timeline. If I grab a video clip on the timeline and drag it left, it bumps the adjacent clip and moves it left. If I haven't let go of the mouse and move the held clip back towards th
-
Extending the evaluation license asks for current activation code. Where is it?
I am attempting to extend the evaluation period for the Vision Acquisition Software. I have obtained an activation code from NI.com to manually enter and extend the evaluation period. When I access the activation wizard through the NI License manage