I can't open UDF volume

Xfce4,hal,thunar
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
Xlib: extension "Generic Event Extension" missing on display ":0.0".
mount: wrong fs type, bad option, bad superblock on /dev/sr0, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
bilon ~ $ dmesg | tail
sr0: rw=0, want=1711268, limit=1703104
udf: udf_read_inode(ino 427816) failed !bh
UDF-fs: No partition found (1)
attempt to access beyond end of device
sr0: rw=0, want=1711268, limit=1703104
udf: udf_read_inode(ino 427816) failed !bh
attempt to access beyond end of device
sr0: rw=0, want=1711268, limit=1703104
udf: udf_read_inode(ino 427816) failed !bh
UDF-fs: No partition found (1)
bilon ~ $
fstab
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /dev/pts devpts defaults 0 0
none /dev/shm tmpfs defaults 0 0
#/dev/cdrom /media/cd auto ro,user,noauto,unhide 0 0
#/dev/dvd /media/dvd auto ro,user,noauto,unhide 0 0
#/dev/fd0 /media/fl auto user,noauto 0 0
UUID=14b38f0a-6ce9-48a7-baa5-9698cb3f99da /home ext3 defaults 0 1
UUID=68911ec7-b7d8-46fc-9e68-274f47b86d98 / ext3 defaults 0 1
UUID=93ad81b9-cc06-467c-a493-20ca8b60b9af swap swap defaults 0 0
i can open dvd only..
Last edited by Bilon WW-a (2009-02-19 19:33:26)

I'd search or post here:
http://www.macosxaudio.com/forums/viewforum.php?f=26

Similar Messages

Since I signed up for icloud, I can't get into my iweb application. I get the following message Can't open file "/Volumes/pnoon1/Band Stufff/Domain.sites2."

Since I signed up for icloud, I can't get into my iweb application. I get the following message
Can’t open file “/Volumes/pnoon1/Band Stufff/Domain.sites2.”
Any one have any clues ????

Hi!
I encountered a problem a few weeks ago which is a bit like yours. In my case my Apple ID stopped working after I upgraded to Mountain Lion. I finally found out it was because of the fact that my Apple ID has in fact been an alias within my much older MobileMe/iCloud account. And they weren't able to merge or reset the account at first. It took me a lot of mails and a few calls to get them to resetting the account and changing my Apple ID (for the Apple Store, iTunes, etc.) to a different, non-iCloud related email adress.
Anyway, maybe you can call the Apple Support and kindly ask them to reset the password for this ominous @me.com account so you can finally start using it.
Did you try logging into iCloud using your adress with the appendix @me.com because not everybody has got the @icloud.com ending yet. Technically it's no problem to create a new iCloud account. I can understand though that you'd like to get "your name" back .

Can't open iWeb after upgrading to iLife 11 (Domain.sites2.)

I just upgraded my iLife package from 09' to 11' just a few days ago. Since then I haven't been able to open up iWeb (09'). I realize that the iLife 11 upgrade shouldn't have harmed iWeb 09', but it's the only change/add that I have done to my machine in the past week. Every time I try to launch iWeb either from the dock or from the domain file itself, I receive the following iWeb error:
Can't open file "/Volumes/Macintosh HD/iWeb/Domain.sites2."
Has anyone seen this problem?

MACTr@KkeR wrote:
Can't open file "/Volumes/Macintosh HD/iWeb/Domain.sites2."
Did you move the Domain.sites2 file to that location? ...It can be moved, but most peopIe leave it where it usually resides and would see an error msg saying:
"Can’t open file “~/Library/Application Support/iWeb/Domain.sites2.”
You could try moving your Domain file to the above location and double-click it there. And remember to always backup all your Domain files before messing with them.
By the way, rather than posting a P.S. in your Public Profile:
"i've tried repairing permissions on the domain file with Batchmod as well."
...you can edit a post within 15 minutes of posting — just click on the pencil icon in the post or reply you want to edit. Then make your changes and click on the Edit Message button to post those changes. Each edit re-starts your 15 minute window for re-editing. (If you're outside the 15-min. window, simply post again.)

On 10.4.11 Mac Mail I get this: Mail cannot update your mailboxes because your home directory is full. You must free up space in your home folder before using Mail. Delete unnedded documents or move documents to another volume. I can't open mail.

On 10.4.11 iMac Mac Mail I get this message: "Mail cannot update your mailboxes because your home directory is full. You must free up space in your home folder before using Mail. Delete unneeded documents or move documents to another volume." I can't open mail to do this. I have reinstalled software but no effect. How do I get into Mail to delete?

Found this on the "more like this" Worked like a charm!
With the Mail.app quit and using the Finder, go to Home > Library > Mail. Copy the Mail folder and place the copy on the Desktop for backup purposes.
Go to Home > Library > Mail > Envelope Index. Move the Envelope Index file to the Desktop.
Launch Mail and you will be prompted to import mailboxes. Select OK and allow the import process to complete.
After confirming all mailboxes were successfully imported and available, you can delete the copy of the Mail folder and old Envelope Index file from the Desktop and this should resolve the problem.

I upgraded my pages '09 to 5.0.1 and now can't open an old saved doc because the volume "Untitled" isn't mounted and I should mount it and try opening again. What do I do??

I am writing a paper and cant open it. I can only find it from file on the top on my screen > open recent... and then a message pops up saying thatI couldn'y open "CSI Milton" because the volume "untitled" couldn't be mounted and it says that I should mount it and try openning the application again. WHAT DO I DO!?!?!

Can you open the same file with Pages '09?
Peter

I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/macBuild/../view/umenu.MacOS.mm.line 1351

I can't open protools error could not create a new document because assertion in/volume/ development/w.s.Protools_10.1.2/Altura parts/DFW/MacBuild/../view/umenu.MacOS.mm.line 1351

I'd search or post here:
http://www.macosxaudio.com/forums/viewforum.php?f=26

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help?

I got a flashing folder with a question mark. I got a new hard drive and upgraded to 4 gigs and can't open anything or reload the operating system? Help? FYI: I have been using boot camp with windows 7 and started getting a kernal_data_Page_error and it would reboot windows, i was trying to do a chkdsk on the next reboot, but thats when i started getting this issue. I have put in a new hard drive and went from 2 gigs to 4. I can not get the computer to do anything, even the monitor does not show anything now????

Prep your new drive:
Drive Preparation
1. Boot from your OS X Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID (for Intel Macs) or APM (for PPC Macs,) then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the Security button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process can take up to several hours depending upon the drive size.
After formatting has completed quit DU and return to the installer. Install OS X.

I can't open a project in Adobe Premiere CS6

After suddenly closed the program i can't open again that project, every time i try appears this window:
"Premiere Pro has encountered an error"
[/Volumes/BuildDisk/builds/mightykilt/shared/adobe/dvamediatypes/project/mac/../../src/Tic kTime.cpp-207]
Can somebody help me please???? i don't want to lose that project.
Thanks

If you go to this forum's Content tab and type "ticktime.cpp-207" in the "Type to filter by text" box, you'll get a few hits.
FYI, at least one issue that could lead to this problem was fixed in CC7.0.

Old Logic + a new Mac = can't open old projects anymore. De/re-install?

Hi everybody,
maybe someone can advise me with this problem:
I bought a new Mac recently, did install a fresh OSX 10.5 and then used migration assistant to transfer my old user account from my old Mac (10.4), incl. all files. It did take a night, but it worked - or so I thought. Actually all applications work as they should, except for Logic. I had to re-authorize a few plug-ins, but then all seemed to be cool. I can open a new project, record audio, midi, add plug-ins, all cool. But I ended up with 3 problems, which are really annoying:
1) EXS24 couldn't find most of the samples anymore. Most, not all. I have 4 internal HDs, one for the system, one for audio recordings, one for samples, one for "other stuff". 2 of these disks came from the old Mac, 2 new ones, content copied from old Mac. In the EXS prefs I set "search for samples" to "all volumes", but it still didn't work perfectly. Finally I bought EXSManager Pro and now it seems to work again. I didn't try ALL samples yet, but the +/- 20 EXS instruments I tried, did load all samples.
2) Space Designer doesn't load impulse responses for the presets anymore. They're there and at the right place. I can load SD and import an existing impulse file, no problem. But the presets don't find the required files anymore.
3) Now - and this is the worst one - I can't open old projects anymore. I just can't. It starts loading, I see the rainbow thing (don't know the right word), it turns black & white and that's it. You can watch this forever and nothing happens.
Regarding all 3 issues:
I don't get any error messages. Logic doesn't crash, I can't click 'apple-.' to stop loading/searching. It just doesn't open the file. I had a coffee, a pizza, I let it try for 2 hrs+, but neither did it load a SD preset or an old song file. All I can do is manually quit Logic.
But when I open Logic with the CTRL-button down and click "no" to core audio I can open all songs. Of course I can not hear a tone then, but it's all there. Opening a song takes 3 secs then. I tried to safe a song then with a different name, re-started Logic with core audio but same result. It get's "stuck".
Of course I checked user permissions and all the usual trouble shooting clicks, but still Logic has a mind of it's own. I installed a 2nd user with admin rights, though still the same, plus all the 3rd party plug-ins refusing to work.
Now I was thinking, should I de-install Logic and re-install from the original CDs maybe. And if so, is there anything special I have to take care of? Like manually removing any prefs or cache files?
Or completely re-install the whole Mac? (pleeease no....)...
If anybody has any idea, it'd be highly appreciated.
Thank you in advance and for the energy to read my little novel here,
cheers,
Joern

Ok, either my question was too long or nobody seems to have an answer. Sad, either way
Here's something I found out in the meantime, maybe this is interesting for somebody or maybe - problem's not totally solved - enough info for any of you to give me further advice.
When I start Logic Core Audio driver de-activated, I can open old songs. Then I save them in a new folder with all audio files and a new name. And I remove all EXS24 instruments as well as the Space Designer. I quit Logic, re-open with Core Audio activated and I can open the song.
Problem no.1: EXS24 instruments don't find the appropriate samples, but EXSMananger Pro did help me with this. Same problem with Space Designer, which doesn't find the impulse responses, connected to a certain preset.
Two questions, every idea would be great!
- Is there any way to teach Space Designer Presets where to look for impulse respones. I can load IR samples directly and create a new preset, but I can't use my old ones.
- Is it possible to install Logic from scratch over an existing version? Or how should I de-install everything connected with Logic and then install a fresh version from CD?
Thank you again,
Joern

Can't open Applications on Mavericks

I have updated my iMac(2009) from Mountain Lion to Mavericks, after a week or so, my applications icon is gone, left the words below it, apps like iMessage, Contacts, Mail, Apps Store, etc. I can't open any of them, My GoPro Studio App's icon is gone too, but i can open it and operate it... Please help me!!

After running Safe Mode, the icon are back, but still the applications can't be open... But here's the results, hopefully this can help out.
Hardware Information:
          iMac (24-inch, Early 2009)
          iMac - model: iMac9,1
          1 2.66 GHz Intel Core 2 Duo CPU: 2 cores
          4 GB RAM
Video Information:
          NVIDIA GeForce 9400 - VRAM: 256 MB
Audio Plug-ins:
          BluetoothAudioPlugIn: Version: 1.0
          AirPlay: Version: 1.9
          AppleAVBAudio: Version: 2.0.0
          iSightAudio: Version: 7.7.3
System Software:
          OS X 10.9 (13A603) - Uptime: 0 days 0:8:19
Disk Information:
          WDC WD6400AAKS-40H2B0 disk0 : (640.14 GB)
                    EFI (disk0s1) <not mounted>: 209.7 MB
                    Macintosh HD (disk0s2) /: 423.48 GB (23.92 GB free)
                    Recovery HD (disk0s3) <not mounted>: 650 MB
                    BOOTCAMP (disk0s4) /Volumes/BOOTCAMP: 215.66 GB (115.46 GB free)
          OPTIARC DVD RW AD-5670S
USB Information:
          Apple Inc. Built-in iSight
          Apple Inc. Keyboard Hub
                    Mitsumi Electric Apple Optical USB Mouse
                    Apple Inc. Apple Keyboard
          Apple Computer, Inc. IR Receiver
          Apple Inc. BRCM2046 Hub
                    Apple Inc. Bluetooth USB Host Controller
FireWire Information:
Thunderbolt Information:
Kernel Extensions:
Problem System Launch Daemons:
Problem System Launch Agents:
Launch Daemons:
          [loaded] com.adobe.fpsaud.plist
          [loaded] com.google.keystone.daemon.plist
          [not loaded] com.gopro.stereomodestatus.plist
          [loaded] com.wdc.WDDMservice.plist
          [loaded] com.WesternDigital.WDSmartWareD.plist
Launch Agents:
          [loaded] com.google.keystone.agent.plist
          [loaded] net.culater.SIMBL.Agent.plist
User Launch Agents:
          [loaded] com.facebook.videochat.Darren.plist
          [loaded] com.macpaw.CleanMyMac.helperTool.plist
          [loaded] com.macpaw.CleanMyMac.trashSizeWatcher.plist
          [loaded] com.macpaw.CleanMyMac.volumeWatcher.plist
User Login Items:
          Skype
          SpeechSynthesisServer
          SIMBL Agent
          uTorrent
          Remote Mouse
          Dropbox
          Shades
          StatusMenu
          HP Product Research
          HPEventHandler
          HP Scheduler
3rd Party Preference Panes:
          Flash Player
          Flip4Mac WMV
          GoPro
          NTFSforMacOSX
          Perian
          Shades Preferences
Internet Plug-ins:
          Default Browser.plugin
          DirectorShockwave.plugin
          Flash Player.plugin
          FlashPlayer-10.6.plugin
          Flip4Mac WMV Plugin.plugin
          GarminGpsControl.plugin
          Google Earth Web Plug-in.plugin
          iPhotoPhotocast.plugin
          JavaAppletPlugin.plugin
          QuickTime Plugin.plugin
          RealPlayer Plugin.plugin
          Silverlight.plugin
          Unity Web Player.plugin
User Internet Plug-ins:
          Google Earth Web Plug-in.plugin
Bad Fonts:
          None
Time Machine:
          Time Machine not configured!
Top Processes by CPU:
               7%          Skype
               2%          WindowServer
               1%          iTunes
               1%          EtreCheck
               1%          mdworker
               0%          coreaudiod
               0%          ps
               0%          Google Chrome
               0%          SystemUIServer
               0%          WDSmartWareD
Top Processes by Memory:
          225 MB             iTunes
          119 MB             Finder
          111 MB             Google Chrome
          105 MB             WindowServer
          86 MB              Skype
          82 MB              Dock
          57 MB              SystemUIServer
          57 MB              CalendarAgent
          53 MB              com.apple.IconServicesAgent
          53 MB              com.apple.internetaccounts
Virtual Memory Statistics:
          275 MB             Free RAM
          1.61 GB            Active RAM
          1.15 GB            Inactive RAM
          572 MB             Wired RAM
          527 MB             Page-ins
          872 KB             Page-outs

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to

I made a bootable disc on an external hard drive, with Yosemite on it. I am running Snow Leopard on my iMac. How can I open the Yosemite disc from the desktop on my iMac? Does the external hard drive need to be connected to my iMac by firewire to do that?

kahjot wrote:
Snow Leopard's Startup Disk pref can’t see Yosemite volumes. So the only way to switch from Snow Leopard to Yosemite is to do what Niel mentioned. Doesn't matter whether it's connected by USB or Firewire, although performance via FW would be faster.
Are you saying that Yos/10.10, as a volume located in a mounted external drive won't appear as an option in Snow Leopard's Startup Disc, in Sys Prefs? I've never heard this one before. AFAIK any mounted volume, regardless of OS, should appear there. I would think that, if it appears in the Boot Picker/Startup Manager it would also appear and could be booted to from Snow's Startup Disk. I can't test this myself, since I don't have Yos. Is what you are saying documented somewhere?

On how many computers can you use a volume license?

Our organization purchased AOO (Adobe Open Options) volume licensing and asked for 6 Mac licenses. We were given 2 licenses for Mac and 2 licenses for Windows. Does anyone here know if the licenses are interchangeable for Mac and Windows? Do you know how many times you can enter the same license into a different computer? Any help would be great. Thank you!

I ended up speaking with Customer Support and for volume licensing, you can install the CS3 software on as many computer systems on a network as you'd like.
You are only limited to operating the CS3 software up to the maximum number of licenses your organization purchased.
So if you have 10 volume licenses you can install the CS3 software on 100 Mac and/or PC systems if you'd like, but can only use the CS3 software on 10 of those systems simultaneously.
The confusing part is they still only give you one or two license key numbers...
If you have a normal consumer license you can only install the software on two separate computer systems, period. And you cannot use the CS3 software on moth systems at the same time.
Thanks again.

Try to open mov file with quicktime, says can't open pdf files.

Hi to everyone,
Suddenly I try to open a mov, any mov file, with quicktime 10.4 and some times opens the finder and nothing more, some times says that it cannot open one pdf document ( a document I actually have but never try to open with QT). some times QT says it canot open some png or jpg file.
But I double click mov files. And the incoherence is permanent, I mean that for the same movie file says it can't open the same pdf file, and in other file the same png, or the same jpg.. it depends on the mov file I try to open. Like if somewhere, somme kind of cache, adresse or reference is wrong.
this is the text of one of those messages when I double click a mov file:
"The document “phoenixRoomfillerB_v001_0104.jpg” could not be opened. QuickTime Player cannot open files in the “JPEG image” format."
And if I try again and again, at some point QT open only the finder window.
The weird thing is that on the finder window i can see the preview and play the preview. and the same mov files play well with VLC. And if I copy the mov file to my desktop it plays well unless QT start to open only the finder window, if that happens it does not work anymore with any file.
The files are on an external drive with 3 partitions.
And I make all the possible cleaning that I can:
I am the administrator of the imac and I am the only one to use it.
I am the owner of the volume
I use disk utility to check and everything is ok
I use onyx to clean as much as possible, cache, boot, volume structure, smart status, home folder permissions, kernel, extensions, QT components, etc. and everything works fine.
Imac 27 inch late 2012.
Intel 3.4 GHz i7
32 Gb Ram
NVIDIA GeForce GTX 680MX 2048 MB
thanx.

Try QT v7.x which is located inside your Utility folder.

I have my iPhone 4s plugged into a dock and the dock connected to an amplifier, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhones volume bar disappears. how can i change the volume?app?

Hi
I have my iPhone 4s plugged into a dock and the dock connected to an amplifier with 2 speakers and a bass, the problem is that the amplifier doesn't have a volume changer and when i plug in the iPhone into the dock the iPhone´s volume bar disappears and im not allowed to change the volume and its very loud. how can i change the volume? is there an app? any ideas??(my dock doesnt have infrared remote controller )
TY!!!!

Kline25 wrote:
So even if I just ask to pay them to replace the lock button they won't because my screens are third-party?
Apple does not repair devices beyond replacing the screen on some models or a battery replacement. They replace the ENTIRE device.
For the Out of Warranty replacement cost, you could have gotten a fully functional replacement device. Instead you chose to spend less to get only the screen replaced and continue to live with additional issues.
Apple will not touch the device now. They will know that it was opened elsewhere and that the replacement screen is not original.

Error - can't open application

I'm getting this error when trying to install photoshop:
You can't open the application "Adobe Photoshop CS6" because it's not supported on this type of Mac.
I've got a IMac duoCor 10.6.8...does this mean I need to buy a new Mac?

Hi Lenaeva,
Possibly, here are the system requirements
Mac OS
Multicore Intel processor with 64-bit support
Mac OS X v10.6.8 or v10.7. Adobe Creative Suite 5, CS5.5, and CS6 applications support Mac OS X Mountain Lion (v10.8) when installed on Intel based systems.**
1GB of RAM
2GB of available hard-disk space for installation; additional free space required during installation (cannot install on a volume that uses a case-sensitive file system or on removable flash storage devices)
1024x768 (1280x800 recommended) resolution display with 16-bit color and 512MB of VRAM
OpenGL 2.0–capable system
DVD-ROM drive
This software will not operate without activation. Broadband Internet connection and registration are required for software activation, validation of subscriptions, and access to online services.† Phone activation is not available.
You might not meet the first one there with some older processors.
This link might help:
http://support.apple.com/kb/HT3696
If its the Core Duo processor it is only 32-bit
-Dave

I can't open UDF volume

Similar Messages

Maybe you are looking for