I can't open up my HP Pavilion g6-1a31nr notebook.

I'm trying to open up my HP Pavilion g6-1a31nr notebook computer to replace the CPU, but even after removing all the screws I can't seem to get it to open up. Can someone give me a guide for opening it up? Thanks.

Hi:
Below is the link to the service manual for your notebook.
http://h10032.www1.hp.com/ctg/Manual/c02770268.pdf
See chapter 4 for the R & R procedures.
It is hard to remove the service door...see this related thread and the other thread I linked to that thread.
http://h30434.www3.hp.com/t5/Notebook-Hardware/Pavilion-g7-1150us-accessing-memory/m-p/1578347/highl...

Similar Messages

How can I upgrade RAM memory for Pavilion dv6-3267cl notebook PC?

My laptop is HP Pavilion dv6-3267cl Entertainment Notebook PC
and OS is Windows 7 Home Premium 64-bit Service Pack 1.
It has intel core i5 cpu m480 2.67ghz 2667mhz 2 core 4 logical processor and two of 2GB SODIMM Samsung 1067MHz are used right now. (total 4GB memory) I'd like to upgrade the memory and
What is the maximum GB of RAM this laptop can have?
Which type of RAM cards should I install? (brand/MHz/GB...)
I tried a 8GB PC3 10600 1333MHz CL9 SoDimm and it caused an error and won't start Windows so I went back to original 2GB.

Hi:
The maximum memory you can run in a pc with the i5 first generation core processor is 2 x 4 GB.

Trouble with all 3 USB Ports: HP Pavilion 14-v062us Notebook PC

I was recently playing a game on my computer with a mouse controlled by a USB drive. A little bit into the game, the mouse disconnected for no known reason. I have been playing this game about six months now, and have never had this problem in the past. I relocated the drive to the other two ports, but the device was not recognized in any of the ports. I plugged in another device controlled by a USB drive and got the same results. I have uninstalled the USB Composite Device and USB Root Hubs then restarted my computer to no success. Any help towards identifying and solving the problem is greatly appreciated!

Hi there @D3rr1ck,
Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
I understand that you are having problems with all of the USB ports on your notebook. I am happy to help with this.
Take a look through the following and try the sections that are applicable.
HP PCs - Troubleshooting USB connections (Windows 8)
Normally the USB driver is a part of the chipset drivers for a board, so you can also try updating that, which you can find on this page: HP Pavilion 14-v062us Notebook PC (ENERGY STAR) - Software and Drivers
Malygris1
I work on behalf of HP
Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
Click Kudos Thumbs Up on the right to say “Thanks” for helping!

I can't open the iTunes set up on my laptop. It's a Windows 7. Help?

I just got a new laptop yesterday. It's an HP Pavilion g7 and it uses Windows 7
I downloaded iTunes and it downloaded just fine. However, I can not open it up the iTunes set-up.
It says "....not valid. Win32 application."
Can anyone please help?

The following document is a good place to start with that one:
iTunes: Windows reports that "iTunesSetup.exe is not a valid Win32 application"

Can not open, view inbox in godaddy web mail

I have been using godaddy webmail for awhile - one day I tried to view my emails and I could not. I can't open them or reply to them or even highlight "inbox". I have avg - they disabled the firewall and viris protection but the problem prosisted. I called godaddy, the ran a check of their system and said it's working properly and it was a problem with my browser. I am able to compose and send emails if I type in a address.

That worked fine in Firefox after Comcast instituted that Xfinity interface last spring, then they fixed something else and broke that for some Firefox users. Connect Lite still works fine.
Using IE, once you're in the full email page open Preferences -> General in the Xfinity menu header and select Xfinity Connect Lite. Then try it in Firefox.
Or, click on the first new email on the preview page, and when you're done with it click on the Inbox link in the Nav Menu in the left column to get your complete Inbox.

Can i open and edit animated GIF in Adobe Photoshop Touch?

Can i open and edit animated GIF in Adobe Photoshop Touch?

No, only regular static GIF images are supported. The desktop version of Photoshop does support this however.

Pages downloaded, but I still can't open iCloud pages from iPad. Says that I need a new version of Pages on my Mac

For my Mac Pro, after I downloaded the new Mavericks OS, I downloaded the new pages. However, I still can't open iCloud pages from iPad. Says that I need a new version of Pages on my Mac.
Please help.

It appears that you are launching the old version, probably using an icon in your Dock. That icon is an alias & is not updated. You will need to go to your Applications folder & find the new Pages 5 icon & double-click it. Once it is launched, you can right-click on the icon & choose Options > keep in Dock from the contextual menu.

Can't open pages from iCloud

Pages 5.2 OSX 10.9.2.
It's the 2 time I have this problem. Trying to open a pages document from iCloud. Message; can't open file "filename.pages". If i download pages can open the document. If i load it on iCloud it can't be opened. Some pollution in the cloud?I can open all documents in iCloud pages.
Screenshot in swedish. // Roland

Well I sort of solved the problem all by myself. Just restarted my Mac // Roland

Vi error on nfs mount; E212: Can't open file for writing

Hi all,
I've setup a umask of 0 for testing on both NFS client (Centos 5.2) and NFS server (OSX 10.5.5 server).
I can create files as one user and edit/save out as another user w/o issue when directly logged into the server via ARD.
However, when I attempt the same from an NFS mount on a client machine, even as root I get the following error using vi;
"file" E212: Can't open file for writing
Looking at the system.log file on the server, I see;
kernel[0]: add_fsevent: no name hard-link! dropping the event. (event 2 vp == 0xa5db510 (-UNKNOWN-FILE)).
This baffles me. My umask is 0 meaning files I create and attempt to edit as other users are 777, but I cannot save out edits unless I do a wq! in vi. At that point, the owner of the file changes to whomever did the vi.
This isn't just a vi issue as it happens using any editor, but I like to use vi.
Any help is greatly appreciated. Hey, beer is on me!

Hi all,
Thanks for the replies
I've narrowed it down to a Centos client issue.
Everything works fine using other Linux based OS's as clients.
Since we have such a huge investment in Centos, I must figure out a workaround. Apple support wasn't much help as usual however they were very nice.
There usual response is "its unsupported".
If Apple really wants to play in the enterprise of business space, they really need to change there philosophy. I mean telling me that I shouldn't mount home directories via NFS is completely rediculus.
What am I supposed to use then, Samba of AFP? No, I don't think so. No offense to Microsoft but why would I use a Windows based file sharing protocol to mount network shares in a Nix env???

Process.start("winword", filename) can not open file with space in the path and name

Hi,
I am trying to write a class which can open file with selected application. for simplicity, now I just hard code the varaibles.
the problem: if the path or file name has space in it, even it exist, winword still can not open it.
could someone kindly show me what I did wrong and how to do it properly.
Thanks in advance.
Belinda
public static class FileOpen
public static void info()
string path = @"c:\a temp folder\aaa 1.txt";
if (File.Exists(path))
    // the file I am using in the sample does exist
     MsgBox.info("yes");
else
     MsgBox.info("no");
// working
//Process.Start("winword", "c:\\aaa.txt");
// not working
//Process.Start("winword", "c:\aaa.txt");
// not working
Process.Start("winword", "c:\\a temp folder\\aaa 1.txt");
// not working
Process.Start("winword", path);

string AppPath;
AppPath = ReadRegistry(Registry.CurrentUser, "Software\\FabricStudio", "TARGETDIR", value).ToString() + @"help";
string FileName = "'"+ AppPath + "\\ImageSamples.doc" + "'";
try
System.Diagnostics.Process.Start("Winword.exe", FileName);
can any body please help for this.
where i am making mistake?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

I need help to find and open a job app that I exported, was able to fill out and sign and saved and now can't open it? What did I do wrong?

What file format did you export it to?

I have tried to reinstall firefox a number of times but it can't open - it repeatedly crashes? whats the deal? (MBPro)

Mac OSX 10.6.6
Can't seem to install firefox....worked originally but then started crashing all the time. Now I can't open it at all, have tried deleting all firefox files and re-downloading...nothing works/ Thoughts?
This in the crash info report when I try to open it:
Add-ons: {23fcfd51-4958-4f00-80a3-ae97e717ed8b}:2.1.0.900,{6904342A-8307-11DF-A508-4AE2DFD72085}:2.1.0.900,{972ce4c6-7e08-4474-a285-3208198ce6fd}:3.6.15
BuildID: 20110303024001
CrashTime: 1299265519
EMCheckCompatibility: true
FramePoisonBase: 00000000f0dea000
FramePoisonSize: 4096
InstallTime: 1299264996
ProductName: Firefox
ReleaseChannel: release
SecondsSinceLastCrash: 372
StartupTime: 1299265517
Theme: classic/1.0
Throttleable: 1
Vendor: Mozilla
Version: 3.6.15
This report also contains technical information about the state of the application when it crashed.

try opening in safe mode

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported..pls advise

I have recently purchased MacBook Pro with Mac OSX 10.7.3 Lion and I would like to install Final Cut Pro 6 Studio2, and it came up with this error: 'you can't open application FinalCutProStudio.mpkg because PowerPc apps are no longer supported......Is there a way to run FCP6 on lion withoput this error? Any help would be appreciated.....

Hi Shane,
Just one more quesiton re: this topic, I am looking to get rosetta but do not have Leopard or Snow Leopard...
I read that it is not on Snow Leopard only on Leopard....so do I need to get only Leopard? Can u advise?
Alternatively I do have Mac OS X Tiger so is it on this and can I install it from here?
Please excuse my lack of knowledge here, just trying to get my FCP 6 up and running asap....
Best Rgds.

After upgrading to iOS 8 I can not open iTunes and iTunes store. Furthermore I cannot even update my app like Facebook etc

I Upgraded my iPad mini with retina screen 16 GB to iOS 8. I'm facing weird issues..i can't open iTunes , itunes store and can't upgrade app which I have downloaded..furthermore my iPad became slow..I don't understand what to do...please help me

Hey ahmedfromtanta,
Thanks for the question. After reviewing your post, it sounds like trouble with Wi-Fi. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
iOS: Troubleshooting Wi-Fi networks and connections
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Can't Open iBookm Preview, App Store and other apps after upgrading to mavericks. PELASE HELP!

Well,
I Can't open several apps, as for example, iBooks, Preview, or App Store!
I can't read pdf's or open books, cant's see images or anything that uses preview app.
Can't go to App Store to look for any available update.
Please help!

First attempt a clean install...
http://mashable.com/2013/10/23/clean-install-os-x-mavericks/
If this doesn't work, which it didn't in my case, then download
Pacifist.
http://www.charlessoft.com/
You will need a copy of the Maverick installer.
Use Pacificst to " Open Apple Intallers"
The go to Contents of Mavericks->Contents of EssentialSystemSoftware->Contents of Essentials.pkg->Applications
Then Click on the programs that don't seem to be working and insall. This helped me update certain applications that weren't working such as App Store, Font Book, Mail, and any others.

I can't open up my HP Pavilion g6-1a31nr notebook.

Similar Messages

Maybe you are looking for