I can't operate face time using celluler data?Does anyone know why?
I can't operate face time using celluler data?Does anyone know why?
Because you can't. It's written into the basic programming of the app that it only works on wifi (likely data rates ro the such, but that's just guessing)
Similar Messages
-
I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?
I can't connect to wifi with iPhone5. Does anyone knows why? and what to do?
Thank you.The Holy Mecha of Wifi
Turn router off then on Try turning your wireless router off then back on.
Change or turn off wireless security You may want to try toggling the settings on your wireless router, switching from WPA to WEP or vice versa, or, as a last resort, turning wireless security off altogether. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
Reset network settings on iPad. On your iPad, open Settings, then navigate to “General” in the left-hand pane. Scroll down and tap Reset, then select “Reset Network Settings.” This will delete any stored WiFi passwords and other information, but may result in a more stable connection.
Adjust brightness upward. Oddly, a number of users have found that they can resolve this issue by simply adjusting the iPad’s brightness level upward and off the lowest setting. To do this, tap Settings, then select “Brightness & Wallpaper” from the left-hand pane. Slide the brightness bar upward, then wait 1-2 minutes and check for an improvement in signal strength. Speculation holds that a power delivery issue associated with the screen brightness affects Wi-Fi.
Change thresholds in router settings. Access your routers configuration screen (for most routers, open a browser and enter the address 192.168.1.1), then change the fragmentation threshold and the CTS/RTS threshold as described here. Some users have found success with the settings Fragmentation= 2048, RTS = 512.
Change 802.11 spec on router. Try changing your router’s wireless spec mode from B, G and N to G only or vice versa. For AirPort routers, this can be accomplished with the AirPort Admin Utility. For other routers, this can usually be accomplished by accessing the router’s configuration page — open a browser and enter the address 192.168.1.1.
Switch routers. Although a far-from-ideal solution, some users have found success with switching to a different wireless router.
Turn off “Ask to Join Networks.” To do so, tap Settings on your iPad, then select “Wi-Fi” from the left-hand pane. Slide “Ask to Join Networks” to off. Speculation holds that leaving this option on causes the iPad to constantly seek networks, resulting in some type of interference with the network to which it is connected.
Forget network then rejoin. Tap Settings on your iPad, then select Wi-Fi from the left-hand pane. Choose the network with which you are experiencing difficulty, then select “Forget this network.” Go back to the previous screen and rejoin the network.
Turn off Bluetooth. Some users report that, perhaps due to interference issues, turning off Bluetooth can boost Wi-Fi signal strength. To do so, tap Settings then tap General in the left-hand pane. Tap Bluetooth in the right-hand pane, then slide to off. -
Hi
I have purchased an audio book from iTunes with my iMac.
Now I wanted to listen to it on my iPhone so I proceeded to transfer the purchase and looked for the book in the purchased section of the store in the iTunes on my iPhone but it did not show up.
Does anyone know why and how I can transfer the audio book purchased on my iPhone so I can listen while away from the desk?
Thank you,
SanyaCan you find the audio book by using the Search feature on the iPod?
Do you have the right boxes checked to sync the audio book to the iPod?
iTunes: Syncing media content to iOS devices and iPod
Note you have to check the boxes in Books pane for the iPod in iTunes to sync books in general and another box to sync Audio Books. -
I recently purchased the new I pad and I can not print the international labels.I have no problem with the U.S. labels or my air printing.can anyone help me with this thank you in advance
What make and model printer? How does printing the international labels fail?
-
I have an IBook PPC G4 with version 10.4.11. I am using Safari version 4.1.3. I haven't had any problems until the last few weeks. Safari unexpectedly quits on me at least 4 or 5 times a day. Does anyone know of a solution to my problem?
I've never used this site before and had a hard time figuring out how to reply to you.
Mac OS X Version 10.4.11 (Build 8S165)
2014-05-17 07:21:32 -0400
on write, error=-1
on write, error=-1
2014-05-17 07:21:37.627 SystemUIServer[83] lang is:en
May 17 07:21:40 Joe-Kannars-iBook ntpd[176]: bind() fd 12, family 30, port 123, addr 2601:7:5980:69e:211:24ff:fec3:b72a, in6_is_addr_multicast=0 flags=0 fails: Can't assign requested address
Workaround Bonjour: Unknown error: 0
May 17 08:39:30 Joe-Kannars-iBook mDNSResponder: ERROR: getOptRdata - unknown opt 4
May 17 08:39:31 Joe-Kannars-iBook mDNSResponder: ERROR: getOptRdata - unknown opt 4
May 17 08:40:23 Joe-Kannars-iBook mDNSResponder: ERROR: getOptRdata - unknown opt 4
May 17 08:40:24 Joe-Kannars-iBook mDNSResponder: ERROR: getOptRdata - unknown opt 4
May 17 08:40:26 Joe-Kannars-iBook mDNSResponder: ERROR: getOptRdata - unknown opt 4
May 17 08:40:30 Joe-Kannars-iBook mDNSResponder: ERROR: getOptRdata - unknown opt 4
May 17 08:40:38 Joe-Kannars-iBook mDNSResponder: ERROR: getOptRdata - unknown opt 4
May 17 08:40:54 Joe-Kannars-iBook mDNSResponder: ERROR: getOptRdata - unknown opt 4
May 17 08:48:06 Joe-Kannars-iBook crashdump[234]: Safari crashed
May 17 08:48:12 Joe-Kannars-iBook crashdump[234]: crash report written to: /Users/admin/Library/Logs/CrashReporter/Safari.crash.log
May 17 10:38:57 Joe-Kannars-iBook crashdump[249]: Safari crashed
May 17 10:38:58 Joe-Kannars-iBook crashdump[249]: crash report written to: /Users/admin/Library/Logs/CrashReporter/Safari.crash.log
May 17 12:21:07 Joe-Kannars-iBook crashdump[265]: Safari crashed
May 17 12:21:14 Joe-Kannars-iBook crashdump[265]: crash report written to: /Users/admin/Library/Logs/CrashReporter/Safari.crash.log
May 17 12:22:56 Joe-Kannars-iBook /usr/sbin/ocspd: starting
May 17 15:43:04 Joe-Kannars-iBook crashdump[293]: Safari crashed
May 17 15:43:09 Joe-Kannars-iBook crashdump[293]: crash report written to: /Users/admin/Library/Logs/CrashReporter/Safari.crash.log -
I don't know of there is anyone than can fix this age old Apple problem. Does anyone know how to retrieve apps under an old Apple ID when the email used for that account no longer exists & I can't remember the password? After speaking with Apple Acct. Security, I got the security Q right but my birthday was wrong! They wanted the serial number from my phone that was 3 iPhones ago! Seriously??!!
Any updated way to work around this? No Apple people can correct it.
Thanks,
JoeYou need to ask Apple to reset your security questions. To do this, click here and pick a method; if that page doesn't list one for your country or you're unable to call, fill out and submit this form.
(122986) -
I can no longer print from windows pc via mac/time machine in lion. Does anyone know why or how to fix? I have print sharing ticked and printer is HP laser jest 2550.
I finally found a log file... unfortunately, it doesn't help me figure out what's wrong... but maybe it will mean something to one of you?
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding start banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding job file of type application/postscript.
I [10/Dec/2007:20:23:35 -0500] [Job 11] Adding end banner page "none".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Queued on "SUTTER_WG" by "kristophermiller".
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstoappleps (PID 335)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/pstocupsraster (PID 336)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started filter /usr/libexec/cups/filter/rastertoepson (PID 338)
I [10/Dec/2007:20:23:35 -0500] [Job 11] Started backend /usr/libexec/cups/backend/smb (PID 339)
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster unsupported colorSpace: colorSpace = -1, colorOrder =1, bitsPerColor = 1
E [10/Dec/2007:20:23:36 -0500] [Job 11] cgpdftoraster: got an error from cupsRasterInterpretPPD
E [10/Dec/2007:20:23:36 -0500] [Job 11] No pages found!
E [10/Dec/2007:20:23:36 -0500] PID 338 (/usr/libexec/cups/filter/rastertoepson) stopped with status 1!
I [10/Dec/2007:20:23:36 -0500] Hint: Try setting the LogLevel to "debug" to find out more.
E [10/Dec/2007:20:23:36 -0500] [Job 11] Job stopped due to filter errors. -
Every time I introduce the WPA2 passwords I can´t connect. I can only connect to open wi fi networks? Does anyone know why? Thanks
Some users with various Wi-Fi connection problems have reported that they were given the following instructions by Apple Support, sometimes with success. I can't vouch for this procedure myself. After completing the procedure, you'll have to recreate all your settings in the Network preference pane. Make sure you know how to do that before you begin. Taking screenshots of the preference pane may be helpful.
Step 1
Back up all data.
Triple-click the line below on this page to select it:
/Library/Preferences/SystemConfiguration
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item named "SystemConfiguration" selected. Move the selected item to the Trash. You may be prompted for your administrator password.
*If you don't see the contextual menu item, copy the selected text to the Clipboard (command-C). In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Step 2
Reset the System Management Controller -
Please help! We got a used Mac Mini and we don't have the former owner's password, so we can't install anything like flash player. Does anyone know how to get around this? I don't know how to wipe the hard drive, and the support online doesn't seem to work.
As posted previously:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
If installing Leopard the process is similar in some respects. If you wish to begin anew then after selecting the target disk click on the Options button and select the Erase and Install option then click on the OK button. To install over an existing system do the following:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
Hi i have avi files saved in iphoto that i used to be able to play through quicktime. However in the last few weeks i cannot play many of these files. I can see the videos and click on them but nothing happens (i have version 7.6.9 of quicktime). Does anyone know why this has happened and what i can do about this?
Thanks.What do you mean by what audio/video formats are involved? These are all files from several digital cameras.
As previously stated, AVI is a file container. It is somewhat old and its originator, Microsoft, dropped official support of it over a decade ago. However, it remains popular with PC users since almost any valid audio and/or video compression format can be stuffed to the file which synchronizes the content by interleaving the individual audio and video frames. The compression format is the specific manner in which the audio and video data are encoded as it is placed in the AVI container. You can find the compression format by inspecting the file in the Finder "Info" window, or in the "Inspector" window of the QT player (or other media player) if the file can be opened.
For instance, one popular compression combination would be to place DivX encoded video and MP3 audio in an AVI file container. However, neither DivX nor MP3 is natively supported by the QT player. (Although iTunes will natively support the MP3 audio.) Therefore, people who wish to play such files in the QT 7 Player would normally install either the DivX component or Perian but not both. Either installation will independently play such files in the QT Player, but if both are installed, the file will usually stop working since these two codecs can create a playback conflict.
However, the AVI container could just as easily contain DV along with DV audio. In this case, the file should play correctly in QT since this compression format is natively supported by the basic component configuration that comes in every current OS installation. Therefore, if such files suddenly stopped playing, this could be an indication that a component has been moved or deleted or that your system or QT embedded structure has become corrupted. -
Does anyone know why since upgrading to ML notes are not visible in Time Machine. They used to be part of mail and could be recovered from Time machine but since ML I don't seem to be able to access notes in Time Machine. Any help would be useful.
Welcome to Apple Communities
Mail doesn't support notes. If you use iCloud, you have them in it because Notes is an application -
When I publish a movie using Captivate 6 I sometimes get a slide that is overlayed with part of a previous slide. Does anyone know why this might be happening and what I can do to prevent it?
Which version of 6? Check the slide quality, if it is at Low, push it to High or Optimized. Then uncheck all compression settings in Preferences, Project, SWF Size and Quality.
-
Does anyone know why, when using Messages on my iPad, a cannot send a message with only text on it? Strange though, I can send a message with text AND a photo??
Hi Cass,
If you are having issues with Messages on your iPad, you may find the following article helpful:
iOS: Troubleshooting Messages
http://support.apple.com/kb/ts2755
Regards,
- Brenden -
My MacBook Pro is really hot and the fan is on constantly. It didn't use to do this, does anyone know why this is happening? I have a very short battery life, so I have to keep it plugged in probably more than I should.
Open Activity Monitor in the Utilities folder. Select All Processes from the Processes dropdown menu. Click twice on the CPU% column header to display in descending order. If you find a process using a large amount of CPU time, then select the process and click on the Quit icon in the toolbar. Click on the Force Quit button to kill the process. See if that helps. Be sure to note the name of the runaway process so you can track down the cause of the problem.
-
When I bootup the icon for Elements shows up in orange. It changes to green only when I've gone to Finder and clicked on Elelments under the Devices list. This is a recent development. The icon used to be green upon bootup. Does anyone know why ?
I'm sorry to hear that.
I'm not affiliated w/ the developer, just a happy user that gave up fighting the apple podcast app a while ago. I used to have a bunch of smart playlists in itunes for my podcasts, and come home every day and pathologically synced my phone as soon as I walked in the door, and again before I walked out the door in the morning.
Since my wife was doing this too, we were fighting over who's turn it was to sync their phone.
Since I've switched to Downcast, I no longer worry about syncing my phone to itunes at all. I can go weeks between syncs.
Setup a "playlist" in downcast (ex., "Commute") and add podcasts to that playlist. Add another playlist ("walk" or "workout") and add different podcasts to that one.
Set podcast priorities on a per-feed basis (ex., high priority for some daily news feeds, medium priority for some favorite podcasts, lower priority for other stuff). Downcast will play the things in the priority you specify, and within that priority, it will play in date order (oldest to newest).
Allegedly, it will also sync your play status to other devices, although that is not a feature I currently use and can't vouch for. It uses apple's iCloud APIs, so to some extent may be limited by what Apple's APIs can do.
Maybe you are looking for
-
How do I transfer itunes library from one hard drive to another.
I want to transfer all my itunes music from one external hard drive to another. How can I do this without disrupting itunes. Thanks.
-
Is Apple going to fix the bugs?
What a mess OS X Mavericks is. I think the Apple Engineers got their chopsticks crossed. I was hoping the Apple Mac Pro would be different than Windows problems, guess I was wrong. There are so many things wrong with this last upgrade! I wish ther
-
Will the Display Menu app hold mirrored settings upon restart?
I work at a College and manage over 100 classroom computers. In each classroom the computer is connected to a projector. When we moved to Mavericks we lost the majority of display resolutions formerly available to us and unfortunately, none of the re
-
This is not my first time using Firefox...It has always worked on previous versions. I have just downloaded 4.0. Is this a known bug with Firefox 4.0 ??
-
Splash Screen & Logo & Keys Configuration
Hi, Os: Windows 7 64bit. Oracle Fusion Middle ware 11g. I am tring to custom splash screen and logo . So i try to change the formsweb.cfg parameter (Logo & SplashScren) and i put the path of the images in forms_path and i am tring to configure my app